Anthropic - Claude Code Docs Changes

agent-teams.md +387 −0 added

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

5# Orchestrate teams of Claude Code sessions

7> Coordinate multiple Claude Code instances working together as a team, with shared tasks, inter-agent messaging, and centralized management.

9<Warning>

10 Agent teams are experimental and disabled by default. Enable them by adding `CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS` to your [settings.json](/en/settings) or environment. Agent teams have [known limitations](#limitations) around session resumption, task coordination, and shutdown behavior.

11</Warning>

13Agent teams let you coordinate multiple Claude Code instances working together. One session acts as the team lead, coordinating work, assigning tasks, and synthesizing results. Teammates work independently, each in its own context window, and communicate directly with each other.

15Unlike [subagents](/en/sub-agents), which run within a single session and can only report back to the main agent, you can also interact with individual teammates directly without going through the lead.

17This page covers:

19* [When to use agent teams](#when-to-use-agent-teams), including best use cases and how they compare with subagents

20* [Starting a team](#start-your-first-agent-team)

21* [Controlling teammates](#control-your-agent-team), including display modes, task assignment, and delegation

22* [Best practices for parallel work](#best-practices)

24## When to use agent teams

26Agent teams are most effective for tasks where parallel exploration adds real value. See [use case examples](#use-case-examples) for full scenarios. The strongest use cases are:

28* **Research and review**: multiple teammates can investigate different aspects of a problem simultaneously, then share and challenge each other's findings

29* **New modules or features**: teammates can each own a separate piece without stepping on each other

30* **Debugging with competing hypotheses**: teammates test different theories in parallel and converge on the answer faster

31* **Cross-layer coordination**: changes that span frontend, backend, and tests, each owned by a different teammate

33Agent teams add coordination overhead and use significantly more tokens than a single session. They work best when teammates can operate independently. For sequential tasks, same-file edits, or work with many dependencies, a single session or [subagents](/en/sub-agents) are more effective.

35### Compare with subagents

37Both agent teams and [subagents](/en/sub-agents) let you parallelize work, but they operate differently. Choose based on whether your workers need to communicate with each other:

39| | Subagents | Agent teams |

40| :---------------- | :----------------------------------------------- | :-------------------------------------------------- |

41| **Context** | Own context window; results return to the caller | Own context window; fully independent |

42| **Communication** | Report results back to the main agent only | Teammates message each other directly |

43| **Coordination** | Main agent manages all work | Shared task list with self-coordination |

44| **Best for** | Focused tasks where only the result matters | Complex work requiring discussion and collaboration |

45| **Token cost** | Lower: results summarized back to main context | Higher: each teammate is a separate Claude instance |

47Use subagents when you need quick, focused workers that report back. Use agent teams when teammates need to share findings, challenge each other, and coordinate on their own.

49## Enable agent teams

51Agent teams are disabled by default. Enable them by setting the `CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS` environment variable to `1`, either in your shell environment or through [settings.json](/en/settings):

53```json settings.json theme={null}

54{

55 "env": {

56 "CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS": "1"

57 }

58}

59```

61## Start your first agent team

63After enabling agent teams, tell Claude to create an agent team and describe the task and the team structure you want in natural language. Claude creates the team, spawns teammates, and coordinates work based on your prompt.

65This example works well because the three roles are independent and can explore the problem without waiting on each other:

67```

68I'm designing a CLI tool that helps developers track TODO comments across

69their codebase. Create an agent team to explore this from different angles: one

70teammate on UX, one on technical architecture, one playing devil's advocate.

71```

73From there, Claude creates a team with a [shared task list](/en/interactive-mode#task-list), spawns teammates for each perspective, has them explore the problem, synthesizes findings, and attempts to [clean up the team](#clean-up-the-team) when finished.

75The lead's terminal lists all teammates and what they're working on. Use Shift+Up/Down to select a teammate and message them directly.

77If you want each teammate in its own split pane, see [Choose a display mode](#choose-a-display-mode).

79## Control your agent team

81Tell the lead what you want in natural language. It handles team coordination, task assignment, and delegation based on your instructions.

83### Choose a display mode

85Agent teams support two display modes:

87* **In-process**: all teammates run inside your main terminal. Use Shift+Up/Down to select a teammate and type to message them directly. Works in any terminal, no extra setup required.

88* **Split panes**: each teammate gets its own pane. You can see everyone's output at once and click into a pane to interact directly. Requires tmux, or iTerm2.

90<Note>

91 `tmux` has known limitations on certain operating systems and traditionally works best on macOS. Using `tmux -CC` in iTerm2 is the suggested entrypoint into `tmux`.

92</Note>

94The default is `"auto"`, which uses split panes if you're already running inside a tmux session, and in-process otherwise. The `"tmux"` setting enables split-pane mode and auto-detects whether to use tmux or iTerm2 based on your terminal. To override, set `teammateMode` in your [settings.json](/en/settings):

96```json theme={null}

97{

98 "teammateMode": "in-process"

99}

100```

101

102To force in-process mode for a single session, pass it as a flag:

103

104```bash theme={null}

105claude --teammate-mode in-process

106```

107

108Split-pane mode requires either [tmux](https://github.com/tmux/tmux/wiki) or iTerm2 with the [`it2` CLI](https://github.com/mkusaka/it2). To install manually:

109

110* **tmux**: install through your system's package manager. See the [tmux wiki](https://github.com/tmux/tmux/wiki/Installing) for platform-specific instructions.

111* **iTerm2**: install the [`it2` CLI](https://github.com/mkusaka/it2), then enable the Python API in **iTerm2 → Settings → General → Magic → Enable Python API**.

112

113### Specify teammates and models

114

115Claude decides the number of teammates to spawn based on your task, or you can specify exactly what you want:

116

117```

118Create a team with 4 teammates to refactor these modules in parallel.

119Use Sonnet for each teammate.

120```

121

122### Require plan approval for teammates

123

124For complex or risky tasks, you can require teammates to plan before implementing. The teammate works in read-only plan mode until the lead approves their approach:

125

126```

127Spawn an architect teammate to refactor the authentication module.

128Require plan approval before they make any changes.

129```

130

131When a teammate finishes planning, it sends a plan approval request to the lead. The lead reviews the plan and either approves it or rejects it with feedback. If rejected, the teammate stays in plan mode, revises based on the feedback, and resubmits. Once approved, the teammate exits plan mode and begins implementation.

132

133The lead makes approval decisions autonomously. To influence the lead's judgment, give it criteria in your prompt, such as "only approve plans that include test coverage" or "reject plans that modify the database schema."

134

135### Use delegate mode

136

137Without delegate mode, the lead sometimes starts implementing tasks itself instead of waiting for teammates. Delegate mode prevents this by restricting the lead to coordination-only tools: spawning, messaging, shutting down teammates, and managing tasks.

138

139This is useful when you want the lead to focus entirely on orchestration, such as breaking down work, assigning tasks, and synthesizing results, without touching code directly.

140

141To enable it, start a team first, then press Shift+Tab to cycle into delegate mode.

142

143### Talk to teammates directly

144

145Each teammate is a full, independent Claude Code session. You can message any teammate directly to give additional instructions, ask follow-up questions, or redirect their approach.

146

147* **In-process mode**: use Shift+Up/Down to select a teammate, then type to send them a message. Press Enter to view a teammate's session, then Escape to interrupt their current turn. Press Ctrl+T to toggle the task list.

148* **Split-pane mode**: click into a teammate's pane to interact with their session directly. Each teammate has a full view of their own terminal.

149

150### Assign and claim tasks

151

152The shared task list coordinates work across the team. The lead creates tasks and teammates work through them. Tasks have three states: pending, in progress, and completed. Tasks can also depend on other tasks: a pending task with unresolved dependencies cannot be claimed until those dependencies are completed.

153

154The lead can assign tasks explicitly, or teammates can self-claim:

155

156* **Lead assigns**: tell the lead which task to give to which teammate

157* **Self-claim**: after finishing a task, a teammate picks up the next unassigned, unblocked task on its own

158

159Task claiming uses file locking to prevent race conditions when multiple teammates try to claim the same task simultaneously.

160

161### Shut down teammates

162

163To gracefully end a teammate's session:

164

165```

166Ask the researcher teammate to shut down

167```

168

169The lead sends a shutdown request. The teammate can approve, exiting gracefully, or reject with an explanation.

170

171### Clean up the team

172

173When you're done, ask the lead to clean up:

174

175```

176Clean up the team

177```

178

179This removes the shared team resources. When the lead runs cleanup, it checks for active teammates and fails if any are still running, so shut them down first.

180

181<Warning>

182 Always use the lead to clean up. Teammates should not run cleanup because their team context may not resolve correctly, potentially leaving resources in an inconsistent state.

183</Warning>

184

185### Enforce quality gates with hooks

186

187Use [hooks](/en/hooks) to enforce rules when teammates finish work or tasks complete:

188

189* [`TeammateIdle`](/en/hooks#teammateidle): runs when a teammate is about to go idle. Exit with code 2 to send feedback and keep the teammate working.

190* [`TaskCompleted`](/en/hooks#taskcompleted): runs when a task is being marked complete. Exit with code 2 to prevent completion and send feedback.

191

192## How agent teams work

193

194This section covers the architecture and mechanics behind agent teams. If you want to start using them, see [Control your agent team](#control-your-agent-team) above.

195

196### How Claude starts agent teams

197

198There are two ways agent teams get started:

199

200* **You request a team**: give Claude a task that benefits from parallel work and explicitly ask for an agent team. Claude creates one based on your instructions.

201* **Claude proposes a team**: if Claude determines your task would benefit from parallel work, it may suggest creating a team. You confirm before it proceeds.

202

203In both cases, you stay in control. Claude won't create a team without your approval.

204

205### Architecture

206

207An agent team consists of:

208

209| Component | Role |

210| :------------ | :----------------------------------------------------------------------------------------- |

211| **Team lead** | The main Claude Code session that creates the team, spawns teammates, and coordinates work |

212| **Teammates** | Separate Claude Code instances that each work on assigned tasks |

213| **Task list** | Shared list of work items that teammates claim and complete |

214| **Mailbox** | Messaging system for communication between agents |

215

216See [Choose a display mode](#choose-a-display-mode) for display configuration options. Teammate messages arrive at the lead automatically.

217

218The system manages task dependencies automatically. When a teammate completes a task that other tasks depend on, blocked tasks unblock without manual intervention.

219

220Teams and tasks are stored locally:

221

222* **Team config**: `~/.claude/teams/{team-name}/config.json`

223* **Task list**: `~/.claude/tasks/{team-name}/`

224

225The team config contains a `members` array with each teammate's name, agent ID, and agent type. Teammates can read this file to discover other team members.

226

227### Permissions

228

229Teammates start with the lead's permission settings. If the lead runs with `--dangerously-skip-permissions`, all teammates do too. After spawning, you can change individual teammate modes, but you can't set per-teammate modes at spawn time.

230

231### Context and communication

232

233Each teammate has its own context window. When spawned, a teammate loads the same project context as a regular session: CLAUDE.md, MCP servers, and skills. It also receives the spawn prompt from the lead. The lead's conversation history does not carry over.

234

235**How teammates share information:**

236

237* **Automatic message delivery**: when teammates send messages, they're delivered automatically to recipients. The lead doesn't need to poll for updates.

238* **Idle notifications**: when a teammate finishes and stops, they automatically notify the lead.

239* **Shared task list**: all agents can see task status and claim available work.

240

241**Teammate messaging:**

242

243* **message**: send a message to one specific teammate

244* **broadcast**: send to all teammates simultaneously. Use sparingly, as costs scale with team size.

245

246### Token usage

247

248Agent teams use significantly more tokens than a single session. Each teammate has its own context window, and token usage scales with the number of active teammates. For research, review, and new feature work, the extra tokens are usually worthwhile. For routine tasks, a single session is more cost-effective. See [agent team token costs](/en/costs#agent-team-token-costs) for usage guidance.

249

250## Use case examples

251

252These examples show how agent teams handle tasks where parallel exploration adds value.

253

254### Run a parallel code review

255

256A single reviewer tends to gravitate toward one type of issue at a time. Splitting review criteria into independent domains means security, performance, and test coverage all get thorough attention simultaneously. The prompt assigns each teammate a distinct lens so they don't overlap:

257

258```

259Create an agent team to review PR #142. Spawn three reviewers:

260- One focused on security implications

261- One checking performance impact

262- One validating test coverage

263Have them each review and report findings.

264```

265

266Each reviewer works from the same PR but applies a different filter. The lead synthesizes findings across all three after they finish.

267

268### Investigate with competing hypotheses

269

270When the root cause is unclear, a single agent tends to find one plausible explanation and stop looking. The prompt fights this by making teammates explicitly adversarial: each one's job is not only to investigate its own theory but to challenge the others'.

271

272```

273Users report the app exits after one message instead of staying connected.

274Spawn 5 agent teammates to investigate different hypotheses. Have them talk to

275each other to try to disprove each other's theories, like a scientific

276debate. Update the findings doc with whatever consensus emerges.

277```

278

279The debate structure is the key mechanism here. Sequential investigation suffers from anchoring: once one theory is explored, subsequent investigation is biased toward it.

280

281With multiple independent investigators actively trying to disprove each other, the theory that survives is much more likely to be the actual root cause.

282

283## Best practices

284

285### Give teammates enough context

286

287Teammates load project context automatically, including CLAUDE.md, MCP servers, and skills, but they don't inherit the lead's conversation history. See [Context and communication](#context-and-communication) for details. Include task-specific details in the spawn prompt:

288

289```

290Spawn a security reviewer teammate with the prompt: "Review the authentication module

291at src/auth/ for security vulnerabilities. Focus on token handling, session

292management, and input validation. The app uses JWT tokens stored in

293httpOnly cookies. Report any issues with severity ratings."

294```

295

296### Size tasks appropriately

297

298* **Too small**: coordination overhead exceeds the benefit

299* **Too large**: teammates work too long without check-ins, increasing risk of wasted effort

300* **Just right**: self-contained units that produce a clear deliverable, such as a function, a test file, or a review

301

302<Tip>

303 The lead breaks work into tasks and assigns them to teammates automatically. If it isn't creating enough tasks, ask it to split the work into smaller pieces. Having 5-6 tasks per teammate keeps everyone productive and lets the lead reassign work if someone gets stuck.

304</Tip>

305

306### Wait for teammates to finish

307

308Sometimes the lead starts implementing tasks itself instead of waiting for teammates. If you notice this:

309

310```

311Wait for your teammates to complete their tasks before proceeding

312```

313

314### Start with research and review

315

316If you're new to agent teams, start with tasks that have clear boundaries and don't require writing code: reviewing a PR, researching a library, or investigating a bug. These tasks show the value of parallel exploration without the coordination challenges that come with parallel implementation.

317

318### Avoid file conflicts

319

320Two teammates editing the same file leads to overwrites. Break the work so each teammate owns a different set of files.

321

322### Monitor and steer

323

324Check in on teammates' progress, redirect approaches that aren't working, and synthesize findings as they come in. Letting a team run unattended for too long increases the risk of wasted effort.

325

326## Troubleshooting

327

328### Teammates not appearing

329

330If teammates aren't appearing after you ask Claude to create a team:

331

332* In in-process mode, teammates may already be running but not visible. Press Shift+Down to cycle through active teammates.

333* Check that the task you gave Claude was complex enough to warrant a team. Claude decides whether to spawn teammates based on the task.

334* If you explicitly requested split panes, ensure tmux is installed and available in your PATH:

335 ```bash theme={null}

336 which tmux

337 ```

338* For iTerm2, verify the `it2` CLI is installed and the Python API is enabled in iTerm2 preferences.

339

340### Too many permission prompts

341

342Teammate permission requests bubble up to the lead, which can create friction. Pre-approve common operations in your [permission settings](/en/permissions) before spawning teammates to reduce interruptions.

343

344### Teammates stopping on errors

345

346Teammates may stop after encountering errors instead of recovering. Check their output using Shift+Up/Down in in-process mode or by clicking the pane in split mode, then either:

347

348* Give them additional instructions directly

349* Spawn a replacement teammate to continue the work

350

351### Lead shuts down before work is done

352

353The lead may decide the team is finished before all tasks are actually complete. If this happens, tell it to keep going. You can also tell the lead to wait for teammates to finish before proceeding if it starts doing work instead of delegating.

354

355### Orphaned tmux sessions

356

357If a tmux session persists after the team ends, it may not have been fully cleaned up. List sessions and kill the one created by the team:

358

359```bash theme={null}

360tmux ls

361tmux kill-session -t <session-name>

362```

363

364## Limitations

365

366Agent teams are experimental. Current limitations to be aware of:

367

368* **No session resumption with in-process teammates**: `/resume` and `/rewind` do not restore in-process teammates. After resuming a session, the lead may attempt to message teammates that no longer exist. If this happens, tell the lead to spawn new teammates.

369* **Task status can lag**: teammates sometimes fail to mark tasks as completed, which blocks dependent tasks. If a task appears stuck, check whether the work is actually done and update the task status manually or tell the lead to nudge the teammate.

370* **Shutdown can be slow**: teammates finish their current request or tool call before shutting down, which can take time.

371* **One team per session**: a lead can only manage one team at a time. Clean up the current team before starting a new one.

372* **No nested teams**: teammates cannot spawn their own teams or teammates. Only the lead can manage the team.

373* **Lead is fixed**: the session that creates the team is the lead for its lifetime. You can't promote a teammate to lead or transfer leadership.

374* **Permissions set at spawn**: all teammates start with the lead's permission mode. You can change individual teammate modes after spawning, but you can't set per-teammate modes at spawn time.

375* **Split panes require tmux or iTerm2**: the default in-process mode works in any terminal. Split-pane mode isn't supported in VS Code's integrated terminal, Windows Terminal, or Ghostty.

376

377<Tip>

378 **`CLAUDE.md` works normally**: teammates read `CLAUDE.md` files from their working directory. Use this to provide project-specific guidance to all teammates.

379</Tip>

380

381## Next steps

382

383Explore related approaches for parallel work and delegation:

384

385* **Lightweight delegation**: [subagents](/en/sub-agents) spawn helper agents for research or verification within your session, better for tasks that don't need inter-agent coordination

386* **Manual parallel sessions**: [Git worktrees](/en/common-workflows#run-parallel-claude-code-sessions-with-git-worktrees) let you run multiple Claude Code sessions yourself without automated team coordination

387* **Compare approaches**: see the [subagent vs agent team](/en/features-overview#compare-similar-features) comparison for a side-by-side breakdown

amazon-bedrock.md +19 −23

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Claude Code on Amazon Bedrock5# Claude Code on Amazon Bedrock

2 6

3> Learn about configuring Claude Code through Amazon Bedrock, including setup, IAM configuration, and troubleshooting.7> Learn about configuring Claude Code through Amazon Bedrock, including setup, IAM configuration, and troubleshooting.

110export ANTHROPIC_SMALL_FAST_MODEL_AWS_REGION=us-west-2114export ANTHROPIC_SMALL_FAST_MODEL_AWS_REGION=us-west-2

111```115```

112 116

113**For VS Code Extension users**: Configure environment variables in the VS Code extension settings instead of exporting them in your shell. See [Using Third-Party Providers in VS Code](/en/vs-code#using-third-party-providers-vertex-and-bedrock) for detailed instructions. All environment variables shown in this guide should work when configured through the VS Code extension settings.

~~114~~

115When enabling Bedrock for Claude Code, keep the following in mind:117When enabling Bedrock for Claude Code, keep the following in mind:

116 118

117* `AWS_REGION` is a required environment variable. Claude Code does not read from the `.aws` config file for this setting.119* `AWS_REGION` is a required environment variable. Claude Code does not read from the `.aws` config file for this setting.

145export DISABLE_PROMPT_CACHING=1147export DISABLE_PROMPT_CACHING=1

146```148```

147 149

148<Note>[Prompt caching](https://docs.claude.com/en/docs/build-with-claude/prompt-caching) may not be available in all regions.</Note>150<Note>[Prompt caching](https://platform.claude.com/docs/en/build-with-claude/prompt-caching) may not be available in all regions.</Note>

~~149~~

150### 5. Output token configuration

~~151~~

152These are the recommended token settings for Claude Code with Amazon Bedrock:

~~153~~

154```bash theme={null}

155# Recommended output token settings for Bedrock

156export CLAUDE_CODE_MAX_OUTPUT_TOKENS=4096

157export MAX_THINKING_TOKENS=1024

158```

~~159~~

160**Why these values:**

~~161~~

162* **`CLAUDE_CODE_MAX_OUTPUT_TOKENS=4096`**: Bedrock's burndown throttling logic sets a minimum of 4096 tokens as the `max_token` penalty. Setting this lower won't reduce costs but may cut off long tool uses, causing the Claude Code agent loop to fail persistently. Claude Code typically uses less than 4096 output tokens without extended thinking, but may need this headroom for tasks involving significant file creation or Write tool usage.

~~163~~

164* **`MAX_THINKING_TOKENS=1024`**: This provides space for extended thinking without cutting off tool use responses, while still maintaining focused reasoning chains. This balance helps prevent trajectory changes that aren't always helpful for coding tasks specifically.

165 151

166## IAM configuration152## IAM configuration

167 153

211 We recommend creating a dedicated AWS account for Claude Code to simplify cost tracking and access control.197 We recommend creating a dedicated AWS account for Claude Code to simplify cost tracking and access control.

212</Note>198</Note>

213 199

200## AWS Guardrails

201

202[Amazon Bedrock Guardrails](https://docs.aws.amazon.com/bedrock/latest/userguide/guardrails.html) let you implement content filtering for Claude Code. Create a Guardrail in the [Amazon Bedrock console](https://console.aws.amazon.com/bedrock/), publish a version, then add the Guardrail headers to your [settings file](/en/settings). Enable Cross-Region inference on your Guardrail if you're using cross-region inference profiles.

203

204Example configuration:

205

206```json theme={null}

207{

208 "env": {

209 "ANTHROPIC_CUSTOM_HEADERS": "X-Amzn-Bedrock-GuardrailIdentifier: your-guardrail-id\nX-Amzn-Bedrock-GuardrailVersion: 1"

210 }

211}

212```

213

214## Troubleshooting214## Troubleshooting

215 215

216If you encounter region issues:216If you encounter region issues:

231* [Bedrock pricing](https://aws.amazon.com/bedrock/pricing/)231* [Bedrock pricing](https://aws.amazon.com/bedrock/pricing/)

232* [Bedrock inference profiles](https://docs.aws.amazon.com/bedrock/latest/userguide/inference-profiles-support.html)232* [Bedrock inference profiles](https://docs.aws.amazon.com/bedrock/latest/userguide/inference-profiles-support.html)

233* [Claude Code on Amazon Bedrock: Quick Setup Guide](https://community.aws/content/2tXkZKrZzlrlu0KfH8gST5Dkppq/claude-code-on-amazon-bedrock-quick-setup-guide)- [Claude Code Monitoring Implementation (Bedrock)](https://github.com/aws-solutions-library-samples/guidance-for-claude-code-with-amazon-bedrock/blob/main/assets/docs/MONITORING.md)233* [Claude Code on Amazon Bedrock: Quick Setup Guide](https://community.aws/content/2tXkZKrZzlrlu0KfH8gST5Dkppq/claude-code-on-amazon-bedrock-quick-setup-guide)- [Claude Code Monitoring Implementation (Bedrock)](https://github.com/aws-solutions-library-samples/guidance-for-claude-code-with-amazon-bedrock/blob/main/assets/docs/MONITORING.md)

~~234~~

~~235~~

~~236~~

237> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

analytics.md +180 −47

Details

~~1# Analytics~~1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

2 4

~~3> View detailed usage insights and productivity metrics for your organization's Claude Code deployment.~~5# Track team usage with analytics

4 6

~~5Claude Code provides an analytics dashboard that helps organizations understand developer usage patterns, track productivity metrics, and optimize their Claude Code adoption.~~7> View Claude Code usage metrics, track adoption, and measure engineering velocity in the analytics dashboard.

9Claude Code provides analytics dashboards to help organizations understand developer usage patterns, track contribution metrics, and measure how Claude Code impacts engineering velocity. Access the dashboard for your plan:

12| ----------------------------- | -------------------------------------------------------------------------- | ------------------------------------------------------------------------------------- | ----------------------------------------------------- |

16## Access analytics for Teams and Enterprise

18Navigate to [claude.ai/analytics/claude-code](https://claude.ai/analytics/claude-code). Admins and Owners can view the dashboard.

20The Teams and Enterprise dashboard includes:

22* **Usage metrics**: lines of code accepted, suggestion accept rate, daily active users and sessions

23* **Contribution metrics**: PRs and lines of code shipped with Claude Code assistance, with [GitHub integration](#enable-contribution-metrics)

24* **Leaderboard**: top contributors ranked by Claude Code usage

25* **Data export**: download contribution data as CSV for custom reporting

27### Enable contribution metrics

6 28

7<Note>29<Note>

~~8 Analytics are currently available only for organizations using Claude Code with the Claude API through the Claude Console.~~30 Contribution metrics are in public beta and available on Claude for Teams and Claude for Enterprise plans. These metrics only cover users within your claude.ai organization. Usage through the Claude Console API or third-party integrations is not included.

9</Note>31</Note>

10 32

~~11## Access analytics~~33Usage and adoption data is available for all Claude for Teams and Claude for Enterprise accounts. Contribution metrics require additional setup to connect your GitHub organization.

35You need the Owner role to configure analytics settings. A GitHub admin must install the GitHub app.

37<Warning>

38 Contribution metrics are not available for organizations with [Zero Data Retention](/en/data-usage#data-retention) enabled. The analytics dashboard will show usage metrics only.

39</Warning>

41<Steps>

42 <Step title="Install the GitHub app">

43 A GitHub admin installs the Claude GitHub app on your organization's GitHub account at [github.com/apps/claude](https://github.com/apps/claude).

44 </Step>

46 <Step title="Enable Claude Code analytics">

47 A Claude Owner navigates to [claude.ai/admin-settings/claude-code](https://claude.ai/admin-settings/claude-code) and enables the Claude Code analytics feature.

48 </Step>

50 <Step title="Enable GitHub analytics">

51 On the same page, enable the "GitHub analytics" toggle.

52 </Step>

54 <Step title="Authenticate with GitHub">

55 Complete the GitHub authentication flow and select which GitHub organizations to include in the analysis.

56 </Step>

57</Steps>

12 58

~~13Navigate to the analytics dashboard at [console.anthropic.com/claude-code](https://console.anthropic.com/claude-code).~~59Data typically appears within 24 hours after enabling, with daily updates. If no data appears, you may see one of these messages:

14 60

~~15### Required roles~~61* **"GitHub app required"**: install the GitHub app to view contribution metrics

62* **"Data processing in progress"**: check back in a few days and confirm the GitHub app is installed if data doesn't appear

16 63

~~17* **Primary Owner**~~64Contribution metrics support GitHub Cloud and GitHub Enterprise Server.

~~18* **Owner**~~65

~~19* **Billing**~~66### Review summary metrics

~~20* **Admin**~~

~~21* **Developer**~~

22 67

23<Note>68<Note>

~~24 Users with **User**, **Claude Code User** or **Membership Admin** roles cannot access analytics.~~69 These metrics are deliberately conservative and represent an underestimate of Claude Code's actual impact. Only lines and PRs where there is high confidence in Claude Code's involvement are counted.

25</Note>70</Note>

26 71

~~27## Available metrics~~72The dashboard displays these summary metrics at the top:

74* **PRs with CC**: total count of merged pull requests that contain at least one line of code written with Claude Code

75* **Lines of code with CC**: total lines of code across all merged PRs that were written with Claude Code assistance. Only "effective lines" are counted: lines with more than 3 characters after normalization, excluding empty lines and lines with only brackets or trivial punctuation.

76* **PRs with Claude Code (%)**: percentage of all merged PRs that contain Claude Code-assisted code

77* **Suggestion accept rate**: percentage of times users accept Claude Code's code editing suggestions, including Edit, Write, and NotebookEdit tool usage

78* **Lines of code accepted**: total lines of code written by Claude Code that users have accepted in their sessions. This excludes rejected suggestions and does not track subsequent deletions.

80### Explore the charts

82The dashboard includes several charts to visualize trends over time.

84#### Track adoption

86The Adoption chart shows daily usage trends:

88* **users**: daily active users

89* **sessions**: number of active Claude Code sessions per day

91#### Measure PRs per user

93This chart displays individual developer activity over time:

95* **PRs per user**: total number of PRs merged per day divided by daily active users

96* **users**: daily active users

98Use this to understand how individual productivity changes as Claude Code adoption increases.

100#### View pull requests breakdown

28 101

~~29### Lines of code accepted~~102The Pull requests chart shows a daily breakdown of merged PRs:

30 103

~~31Total lines of code written by Claude Code that users have accepted in their sessions.~~104* **PRs with CC**: pull requests containing Claude Code-assisted code

105* **PRs without CC**: pull requests without Claude Code-assisted code

32 106

~~33* Excludes rejected code suggestions~~107Toggle to **Lines of code** view to see the same breakdown by lines of code rather than PR count.

~~34* Doesn't track subsequent deletions~~

35 108

~~36### Suggestion accept rate~~109#### Find top contributors

37 110

~~38Percentage of times users accept code editing tool usage, including:~~111The Leaderboard shows the top 10 users ranked by contribution volume. Toggle between:

39 112

~~40* Edit~~113* **Pull requests**: shows PRs with Claude Code vs All PRs for each user

~~41* Write~~114* **Lines of code**: shows lines with Claude Code vs All lines for each user

~~42* NotebookEdit~~

43 115

~~44### Activity~~116Click **Export all users** to download complete contribution data for all users as a CSV file. The export includes all users, not just the top 10 displayed.

45 117

~~46**users**: Number of active users in a given day (number on left Y-axis)~~118### PR attribution

47 119

~~48**sessions**: Number of active sessions in a given day (number on right Y-axis)~~120When contribution metrics are enabled, Claude Code analyzes merged pull requests to determine which code was written with Claude Code assistance. This is done by matching Claude Code session activity against the code in each PR.

49 121

~~50### Spend~~122#### Tagging criteria

51 123

~~52**users**: Number of active users in a given day (number on left Y-axis)~~124PRs are tagged as "with Claude Code" if they contain at least one line of code written during a Claude Code session. The system uses conservative matching: only code where there is high confidence in Claude Code's involvement is counted as assisted.

53 125

~~54**spend**: Total dollars spent in a given day (number on right Y-axis)~~126#### Attribution process

55 127

~~56### Team insights~~128When a pull request is merged:

57 129

~~58**Members**: All users who have authenticated to Claude Code~~1301. Added lines are extracted from the PR diff

1312. Claude Code sessions that edited matching files within a time window are identified

1323. PR lines are matched against Claude Code output using multiple strategies

1334. Metrics are calculated for AI-assisted lines and total lines

59 134

~~60* API key users are displayed by **API key identifier**~~135Before comparison, lines are normalized: whitespace is trimmed, multiple spaces are collapsed, quotes are standardized, and text is converted to lowercase.

~~61* OAuth users are displayed by **email address**~~

62 136

~~63**Spend this month:** Per-user total spend for the current month.~~137Merged pull requests containing Claude Code-assisted lines are labeled as `claude-code-assisted` in GitHub.

64 138

~~65**Lines this month:** Per-user total of accepted code lines for the current month.~~139#### Time window

66 140

~~67## Using analytics effectively~~141Sessions from 21 days before to 2 days after the PR merge date are considered for attribution matching.

68 142

~~69### Monitor adoption~~143#### Excluded files

70 144

~~71Track team member status to identify:~~145Certain files are automatically excluded from analysis because they are auto-generated:

146

147* Lock files: package-lock.json, yarn.lock, Cargo.lock, and similar

148* Generated code: Protobuf outputs, build artifacts, minified files

149* Build directories: dist/, build/, node\_modules/, target/

150* Test fixtures: snapshots, cassettes, mock data

151* Lines over 1,000 characters, which are likely minified or generated

152

153#### Attribution notes

154

155Keep these additional details in mind when interpreting attribution data:

156

157* Code substantially rewritten by developers, with more than 20% difference, is not attributed to Claude Code

158* Sessions outside the 21-day window are not considered

159* The algorithm does not consider the PR source or destination branch when performing attribution

160

161### Get the most from analytics

162

163Use contribution metrics to demonstrate ROI, identify adoption patterns, and find team members who can help others get started.

164

165#### Monitor adoption

166

167Track the Adoption chart and user counts to identify:

72 168

73* Active users who can share best practices169* Active users who can share best practices

74* Overall adoption trends across your organization170* Overall adoption trends across your organization

171* Dips in usage that may indicate friction or issues

75 172

~~76### Measure productivity~~173#### Measure ROI

77 174

~~78Tool acceptance rates and code metrics help you:~~175Contribution metrics help answer "Is this tool worth the investment?" with data from your own codebase:

79 176

~~80* Understand developer satisfaction with Claude Code suggestions~~177* Track changes in PRs per user over time as adoption increases

~~81* Track code generation effectiveness~~178* Compare PRs and lines of code shipped with vs. without Claude Code

~~82* Identify opportunities for training or process improvements~~179* Use alongside [DORA metrics](https://dora.dev/), sprint velocity, or other engineering KPIs to understand changes from adopting Claude Code

83 180

~~84## Related resources~~181#### Identify power users

182

183The Leaderboard helps you find team members with high Claude Code adoption who can:

184

185* Share prompting techniques and workflows with the team

186* Provide feedback on what's working well

187* Help onboard new users

188

189#### Access data programmatically

190

191To query this data through GitHub, search for PRs labeled with `claude-code-assisted`.

85 192

~~86* [Monitoring usage with OpenTelemetry](/en/monitoring-usage) for custom metrics and alerting~~193## Access analytics for API customers

~~87* [Identity and access management](/en/iam) for role configuration~~

88 194

195API customers using the Claude Console can access analytics at [platform.claude.com/claude-code](https://platform.claude.com/claude-code). You need the UsageView permission to access the dashboard, which is granted to Developer, Billing, Admin, Owner, and Primary Owner roles.

89 196

197<Note>

198 Contribution metrics with GitHub integration are not currently available for API customers. The Console dashboard shows usage and spend metrics only.

199</Note>

200

201The Console dashboard displays:

202

203* **Lines of code accepted**: total lines of code written by Claude Code that users have accepted in their sessions. This excludes rejected suggestions and does not track subsequent deletions.

204* **Suggestion accept rate**: percentage of times users accept code editing tool usage, including Edit, Write, and NotebookEdit tools.

205* **Activity**: daily active users and sessions shown on a chart.

206* **Spend**: daily API costs in dollars alongside user count.

207

208### View team insights

209

210The team insights table shows per-user metrics:

211

212* **Members**: all users who have authenticated to Claude Code. API key users display by key identifier, OAuth users display by email address.

213* **Spend this month**: per-user total API costs for the current month.

214* **Lines this month**: per-user total of accepted code lines for the current month.

215

216<Note>

217 Spend figures in the Console dashboard are estimates for analytics purposes. For actual costs, refer to your billing page.

218</Note>

219

220## Related resources

90 221

~~91> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt~~222* [Monitoring with OpenTelemetry](/en/monitoring-usage): export real-time metrics and events to your observability stack

223* [Manage costs effectively](/en/costs): set spend limits and optimize token usage

224* [Permissions](/en/permissions): configure roles and permissions

authentication.md +104 −0 added

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

5# Authentication

7> Learn how to configure user authentication and credential management for Claude Code in your organization.

9## Authentication methods

11Setting up Claude Code requires access to Anthropic models. For teams, you can set up Claude Code access in one of these ways:

13* [Claude for Teams or Enterprise](#claude-for-teams-or-enterprise) (recommended)

14* [Claude Console](#claude-console-authentication)

15* [Amazon Bedrock](/en/amazon-bedrock)

16* [Google Vertex AI](/en/google-vertex-ai)

17* [Microsoft Foundry](/en/microsoft-foundry)

19### Claude for Teams or Enterprise

21[Claude for Teams](https://claude.com/pricing#team-&-enterprise) and [Claude for Enterprise](https://anthropic.com/contact-sales) provide the best experience for organizations using Claude Code. Team members get access to both Claude Code and Claude on the web with centralized billing and team management.

23* **Claude for Teams**: self-service plan with collaboration features, admin tools, and billing management. Best for smaller teams.

24* **Claude for Enterprise**: adds SSO, domain capture, role-based permissions, compliance API, and managed policy settings for organization-wide Claude Code configurations. Best for larger organizations with security and compliance requirements.

26<Steps>

27 <Step title="Subscribe">

28 Subscribe to [Claude for Teams](https://claude.com/pricing#team-&-enterprise) or contact sales for [Claude for Enterprise](https://anthropic.com/contact-sales).

29 </Step>

31 <Step title="Invite team members">

32 Invite team members from the admin dashboard.

33 </Step>

35 <Step title="Install and log in">

36 Team members install Claude Code and log in with their Claude.ai accounts.

37 </Step>

38</Steps>

40### Claude Console authentication

42For organizations that prefer API-based billing, you can set up access through the Claude Console.

44<Steps>

45 <Step title="Create or use a Console account">

46 Use your existing Claude Console account or create a new one.

47 </Step>

49 <Step title="Add users">

50 You can add users through either method:

52 * Bulk invite users from within the Console (Console -> Settings -> Members -> Invite)

53 * [Set up SSO](https://support.claude.com/en/articles/13132885-setting-up-single-sign-on-sso)

54 </Step>

56 <Step title="Assign roles">

57 When inviting users, assign one of:

59 * **Claude Code** role: users can only create Claude Code API keys

60 * **Developer** role: users can create any kind of API key

61 </Step>

63 <Step title="Users complete setup">

64 Each invited user needs to:

66 * Accept the Console invite

67 * [Check system requirements](/en/setup#system-requirements)

68 * [Install Claude Code](/en/setup#installation)

69 * Log in with Console account credentials

70 </Step>

71</Steps>

73### Cloud provider authentication

75For teams using Amazon Bedrock, Google Vertex AI, or Microsoft Azure:

77<Steps>

78 <Step title="Follow provider setup">

79 Follow the [Bedrock docs](/en/amazon-bedrock), [Vertex docs](/en/google-vertex-ai), or [Microsoft Foundry docs](/en/microsoft-foundry).

80 </Step>

82 <Step title="Distribute configuration">

83 Distribute the environment variables and instructions for generating cloud credentials to your users. Read more about how to [manage configuration here](/en/settings).

84 </Step>

86 <Step title="Install Claude Code">

87 Users can [install Claude Code](/en/setup#installation).

88 </Step>

89</Steps>

91## Credential management

93Claude Code securely manages your authentication credentials:

95* **Storage location**: on macOS, API keys, OAuth tokens, and other credentials are stored in the encrypted macOS Keychain.

96* **Supported authentication types**: Claude.ai credentials, Claude API credentials, Azure Auth, Bedrock Auth, and Vertex Auth.

97* **Custom credential scripts**: the [`apiKeyHelper`](/en/settings#available-settings) setting can be configured to run a shell script that returns an API key.

98* **Refresh intervals**: by default, `apiKeyHelper` is called after 5 minutes or on HTTP 401 response. Set `CLAUDE_CODE_API_KEY_HELPER_TTL_MS` environment variable for custom refresh intervals.

100## See also

101

102* [Permissions](/en/permissions): configure what Claude Code can access and do

103* [Settings](/en/settings): complete configuration reference

104* [Security](/en/security): security safeguards and best practices

best-practices.md +599 −0 added

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

5# Best Practices for Claude Code

7> Tips and patterns for getting the most out of Claude Code, from configuring your environment to scaling across parallel sessions.

9Claude Code is an agentic coding environment. Unlike a chatbot that answers questions and waits, Claude Code can read your files, run commands, make changes, and autonomously work through problems while you watch, redirect, or step away entirely.

11This changes how you work. Instead of writing code yourself and asking Claude to review it, you describe what you want and Claude figures out how to build it. Claude explores, plans, and implements.

13But this autonomy still comes with a learning curve. Claude works within certain constraints you need to understand.

15This guide covers patterns that have proven effective across Anthropic's internal teams and for engineers using Claude Code across various codebases, languages, and environments. For how the agentic loop works under the hood, see [How Claude Code works](/en/how-claude-code-works).

17***

19Most best practices are based on one constraint: Claude's context window fills up fast, and performance degrades as it fills.

21Claude's context window holds your entire conversation, including every message, every file Claude reads, and every command output. However, this can fill up fast. A single debugging session or codebase exploration might generate and consume tens of thousands of tokens.

23This matters since LLM performance degrades as context fills. When the context window is getting full, Claude may start "forgetting" earlier instructions or making more mistakes. The context window is the most important resource to manage. Track context usage continuously with a [custom status line](/en/statusline), and see [Reduce token usage](/en/costs#reduce-token-usage) for strategies on reducing token usage.

25***

27## Give Claude a way to verify its work

29<Tip>

30 Include tests, screenshots, or expected outputs so Claude can check itself. This is the single highest-leverage thing you can do.

31</Tip>

33Claude performs dramatically better when it can verify its own work, like run tests, compare screenshots, and validate outputs.

35Without clear success criteria, it might produce something that looks right but actually doesn't work. You become the only feedback loop, and every mistake requires your attention.

37| Strategy | Before | After |

38| ------------------------------------- | ------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |

39| **Provide verification criteria** | *"implement a function that validates email addresses"* | *"write a validateEmail function. example test cases: [user@example.com](mailto:user@example.com) is true, invalid is false, [user@.com](mailto:user@.com) is false. run the tests after implementing"* |

40| **Verify UI changes visually** | *"make the dashboard look better"* | *"\[paste screenshot] implement this design. take a screenshot of the result and compare it to the original. list differences and fix them"* |

41| **Address root causes, not symptoms** | *"the build is failing"* | *"the build fails with this error: \[paste error]. fix it and verify the build succeeds. address the root cause, don't suppress the error"* |

43UI changes can be verified using the [Claude in Chrome extension](/en/chrome). It opens new tabs in your browser, tests the UI, and iterates until the code works.

45Your verification can also be a test suite, a linter, or a Bash command that checks output. Invest in making your verification rock-solid.

47***

49## Explore first, then plan, then code

51<Tip>

52 Separate research and planning from implementation to avoid solving the wrong problem.

53</Tip>

55Letting Claude jump straight to coding can produce code that solves the wrong problem. Use [Plan Mode](/en/common-workflows#use-plan-mode-for-safe-code-analysis) to separate exploration from execution.

57The recommended workflow has four phases:

59<Steps>

60 <Step title="Explore">

61 Enter Plan Mode. Claude reads files and answers questions without making changes.

63 ```txt claude (Plan Mode) theme={null}

64 read /src/auth and understand how we handle sessions and login.

65 also look at how we manage environment variables for secrets.

66 ```

67 </Step>

69 <Step title="Plan">

70 Ask Claude to create a detailed implementation plan.

72 ```txt claude (Plan Mode) theme={null}

73 I want to add Google OAuth. What files need to change?

74 What's the session flow? Create a plan.

75 ```

77 Press `Ctrl+G` to open the plan in your text editor for direct editing before Claude proceeds.

78 </Step>

80 <Step title="Implement">

81 Switch back to Normal Mode and let Claude code, verifying against its plan.

83 ```txt claude (Normal Mode) theme={null}

84 implement the OAuth flow from your plan. write tests for the

85 callback handler, run the test suite and fix any failures.

86 ```

87 </Step>

89 <Step title="Commit">

90 Ask Claude to commit with a descriptive message and create a PR.

92 ```txt claude (Normal Mode) theme={null}

93 commit with a descriptive message and open a PR

94 ```

95 </Step>

96</Steps>

98<Callout>

99 Plan Mode is useful, but also adds overhead.

100

101 For tasks where the scope is clear and the fix is small (like fixing a typo, adding a log line, or renaming a variable) ask Claude to do it directly.

102

103 Planning is most useful when you're uncertain about the approach, when the change modifies multiple files, or when you're unfamiliar with the code being modified. If you could describe the diff in one sentence, skip the plan.

104</Callout>

105

106***

107

108## Provide specific context in your prompts

109

110<Tip>

111 The more precise your instructions, the fewer corrections you'll need.

112</Tip>

113

114Claude can infer intent, but it can't read your mind. Reference specific files, mention constraints, and point to example patterns.

115

116| Strategy | Before | After |

117| ------------------------------------------------------------------------------------------------ | ---------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |

118| **Scope the task.** Specify which file, what scenario, and testing preferences. | *"add tests for foo.py"* | *"write a test for foo.py covering the edge case where the user is logged out. avoid mocks."* |

119| **Point to sources.** Direct Claude to the source that can answer a question. | *"why does ExecutionFactory have such a weird api?"* | *"look through ExecutionFactory's git history and summarize how its api came to be"* |

120| **Reference existing patterns.** Point Claude to patterns in your codebase. | *"add a calendar widget"* | *"look at how existing widgets are implemented on the home page to understand the patterns. HotDogWidget.php is a good example. follow the pattern to implement a new calendar widget that lets the user select a month and paginate forwards/backwards to pick a year. build from scratch without libraries other than the ones already used in the codebase."* |

121| **Describe the symptom.** Provide the symptom, the likely location, and what "fixed" looks like. | *"fix the login bug"* | *"users report that login fails after session timeout. check the auth flow in src/auth/, especially token refresh. write a failing test that reproduces the issue, then fix it"* |

122

123Vague prompts can be useful when you're exploring and can afford to course-correct. A prompt like `"what would you improve in this file?"` can surface things you wouldn't have thought to ask about.

124

125### Provide rich content

126

127<Tip>

128 Use `@` to reference files, paste screenshots/images, or pipe data directly.

129</Tip>

130

131You can provide rich data to Claude in several ways:

132

133* **Reference files with `@`** instead of describing where code lives. Claude reads the file before responding.

134* **Paste images directly**. Copy/paste or drag and drop images into the prompt.

135* **Give URLs** for documentation and API references. Use `/permissions` to allowlist frequently-used domains.

136* **Pipe in data** by running `cat error.log | claude` to send file contents directly.

137* **Let Claude fetch what it needs**. Tell Claude to pull context itself using Bash commands, MCP tools, or by reading files.

138

139***

140

141## Configure your environment

142

143A few setup steps make Claude Code significantly more effective across all your sessions. For a full overview of extension features and when to use each one, see [Extend Claude Code](/en/features-overview).

144

145### Write an effective CLAUDE.md

146

147<Tip>

148 Run `/init` to generate a starter CLAUDE.md file based on your current project structure, then refine over time.

149</Tip>

150

151CLAUDE.md is a special file that Claude reads at the start of every conversation. Include Bash commands, code style, and workflow rules. This gives Claude persistent context **it can't infer from code alone**.

152

153The `/init` command analyzes your codebase to detect build systems, test frameworks, and code patterns, giving you a solid foundation to refine.

154

155There's no required format for CLAUDE.md files, but keep it short and human-readable. For example:

156

157```markdown CLAUDE.md theme={null}

158# Code style

159- Use ES modules (import/export) syntax, not CommonJS (require)

160- Destructure imports when possible (eg. import { foo } from 'bar')

161

162# Workflow

163- Be sure to typecheck when you're done making a series of code changes

164- Prefer running single tests, and not the whole test suite, for performance

165```

166

167CLAUDE.md is loaded every session, so only include things that apply broadly. For domain knowledge or workflows that are only relevant sometimes, use [skills](/en/skills) instead. Claude loads them on demand without bloating every conversation.

168

169Keep it concise. For each line, ask: *"Would removing this cause Claude to make mistakes?"* If not, cut it. Bloated CLAUDE.md files cause Claude to ignore your actual instructions!

170

171| ✅ Include | ❌ Exclude |

172| ---------------------------------------------------- | -------------------------------------------------- |

173| Bash commands Claude can't guess | Anything Claude can figure out by reading code |

174| Code style rules that differ from defaults | Standard language conventions Claude already knows |

175| Testing instructions and preferred test runners | Detailed API documentation (link to docs instead) |

176| Repository etiquette (branch naming, PR conventions) | Information that changes frequently |

177| Architectural decisions specific to your project | Long explanations or tutorials |

178| Developer environment quirks (required env vars) | File-by-file descriptions of the codebase |

179| Common gotchas or non-obvious behaviors | Self-evident practices like "write clean code" |

180

181If Claude keeps doing something you don't want despite having a rule against it, the file is probably too long and the rule is getting lost. If Claude asks you questions that are answered in CLAUDE.md, the phrasing might be ambiguous. Treat CLAUDE.md like code: review it when things go wrong, prune it regularly, and test changes by observing whether Claude's behavior actually shifts.

182

183You can tune instructions by adding emphasis (e.g., "IMPORTANT" or "YOU MUST") to improve adherence. Check CLAUDE.md into git so your team can contribute. The file compounds in value over time.

184

185CLAUDE.md files can import additional files using `@path/to/import` syntax:

186

187```markdown CLAUDE.md theme={null}

188See @README.md for project overview and @package.json for available npm commands.

189

190# Additional Instructions

191- Git workflow: @docs/git-instructions.md

192- Personal overrides: @~/.claude/my-project-instructions.md

193```

194

195You can place CLAUDE.md files in several locations:

196

197* **Home folder (`~/.claude/CLAUDE.md`)**: Applies to all Claude sessions

198* **Project root (`./CLAUDE.md`)**: Check into git to share with your team, or name it `CLAUDE.local.md` and `.gitignore` it

199* **Parent directories**: Useful for monorepos where both `root/CLAUDE.md` and `root/foo/CLAUDE.md` are pulled in automatically

200* **Child directories**: Claude pulls in child CLAUDE.md files on demand when working with files in those directories

201

202### Configure permissions

203

204<Tip>

205 Use `/permissions` to allowlist safe commands or `/sandbox` for OS-level isolation. This reduces interruptions while keeping you in control.

206</Tip>

207

208By default, Claude Code requests permission for actions that might modify your system: file writes, Bash commands, MCP tools, etc. This is safe but tedious. After the tenth approval you're not really reviewing anymore, you're just clicking through. There are two ways to reduce these interruptions:

209

210* **Permission allowlists**: Permit specific tools you know are safe (like `npm run lint` or `git commit`)

211* **Sandboxing**: Enable OS-level isolation that restricts filesystem and network access, allowing Claude to work more freely within defined boundaries

212

213Alternatively, use `--dangerously-skip-permissions` to bypass all permission checks for contained workflows like fixing lint errors or generating boilerplate.

214

215<Warning>

216 Letting Claude run arbitrary commands can result in data loss, system corruption, or data exfiltration via prompt injection. Only use `--dangerously-skip-permissions` in a sandbox without internet access.

217</Warning>

218

219Read more about [configuring permissions](/en/settings) and [enabling sandboxing](/en/sandboxing#sandboxing).

220

221### Use CLI tools

222

223<Tip>

224 Tell Claude Code to use CLI tools like `gh`, `aws`, `gcloud`, and `sentry-cli` when interacting with external services.

225</Tip>

226

227CLI tools are the most context-efficient way to interact with external services. If you use GitHub, install the `gh` CLI. Claude knows how to use it for creating issues, opening pull requests, and reading comments. Without `gh`, Claude can still use the GitHub API, but unauthenticated requests often hit rate limits.

228

229Claude is also effective at learning CLI tools it doesn't already know. Try prompts like `Use 'foo-cli-tool --help' to learn about foo tool, then use it to solve A, B, C.`

230

231### Connect MCP servers

232

233<Tip>

234 Run `claude mcp add` to connect external tools like Notion, Figma, or your database.

235</Tip>

236

237With [MCP servers](/en/mcp), you can ask Claude to implement features from issue trackers, query databases, analyze monitoring data, integrate designs from Figma, and automate workflows.

238

239### Set up hooks

240

241<Tip>

242 Use hooks for actions that must happen every time with zero exceptions.

243</Tip>

244

245[Hooks](/en/hooks-guide) run scripts automatically at specific points in Claude's workflow. Unlike CLAUDE.md instructions which are advisory, hooks are deterministic and guarantee the action happens.

246

247Claude can write hooks for you. Try prompts like *"Write a hook that runs eslint after every file edit"* or *"Write a hook that blocks writes to the migrations folder."* Run `/hooks` for interactive configuration, or edit `.claude/settings.json` directly.

248

249### Create skills

250

251<Tip>

252 Create `SKILL.md` files in `.claude/skills/` to give Claude domain knowledge and reusable workflows.

253</Tip>

254

255[Skills](/en/skills) extend Claude's knowledge with information specific to your project, team, or domain. Claude applies them automatically when relevant, or you can invoke them directly with `/skill-name`.

256

257Create a skill by adding a directory with a `SKILL.md` to `.claude/skills/`:

258

259```markdown .claude/skills/api-conventions/SKILL.md theme={null}

260---

261name: api-conventions

262description: REST API design conventions for our services

263---

264# API Conventions

265- Use kebab-case for URL paths

266- Use camelCase for JSON properties

267- Always include pagination for list endpoints

268- Version APIs in the URL path (/v1/, /v2/)

269```

270

271Skills can also define repeatable workflows you invoke directly:

272

273```markdown .claude/skills/fix-issue/SKILL.md theme={null}

274---

275name: fix-issue

276description: Fix a GitHub issue

277disable-model-invocation: true

278---

279Analyze and fix the GitHub issue: $ARGUMENTS.

280

2811. Use `gh issue view` to get the issue details

2822. Understand the problem described in the issue

2833. Search the codebase for relevant files

2844. Implement the necessary changes to fix the issue

2855. Write and run tests to verify the fix

2866. Ensure code passes linting and type checking

2877. Create a descriptive commit message

2888. Push and create a PR

289```

290

291Run `/fix-issue 1234` to invoke it. Use `disable-model-invocation: true` for workflows with side effects that you want to trigger manually.

292

293### Create custom subagents

294

295<Tip>

296 Define specialized assistants in `.claude/agents/` that Claude can delegate to for isolated tasks.

297</Tip>

298

299[Subagents](/en/sub-agents) run in their own context with their own set of allowed tools. They're useful for tasks that read many files or need specialized focus without cluttering your main conversation.

300

301```markdown .claude/agents/security-reviewer.md theme={null}

302---

303name: security-reviewer

304description: Reviews code for security vulnerabilities

305tools: Read, Grep, Glob, Bash

306model: opus

307---

308You are a senior security engineer. Review code for:

309- Injection vulnerabilities (SQL, XSS, command injection)

310- Authentication and authorization flaws

311- Secrets or credentials in code

312- Insecure data handling

313

314Provide specific line references and suggested fixes.

315```

316

317Tell Claude to use subagents explicitly: *"Use a subagent to review this code for security issues."*

318

319### Install plugins

320

321<Tip>

322 Run `/plugin` to browse the marketplace. Plugins add skills, tools, and integrations without configuration.

323</Tip>

324

325[Plugins](/en/plugins) bundle skills, hooks, subagents, and MCP servers into a single installable unit from the community and Anthropic. If you work with a typed language, install a [code intelligence plugin](/en/discover-plugins#code-intelligence) to give Claude precise symbol navigation and automatic error detection after edits.

326

327For guidance on choosing between skills, subagents, hooks, and MCP, see [Extend Claude Code](/en/features-overview#match-features-to-your-goal).

328

329***

330

331## Communicate effectively

332

333The way you communicate with Claude Code significantly impacts the quality of results.

334

335### Ask codebase questions

336

337<Tip>

338 Ask Claude questions you'd ask a senior engineer.

339</Tip>

340

341When onboarding to a new codebase, use Claude Code for learning and exploration. You can ask Claude the same sorts of questions you would ask another engineer:

342

343* How does logging work?

344* How do I make a new API endpoint?

345* What does `async move { ... }` do on line 134 of `foo.rs`?

346* What edge cases does `CustomerOnboardingFlowImpl` handle?

347* Why does this code call `foo()` instead of `bar()` on line 333?

348

349Using Claude Code this way is an effective onboarding workflow, improving ramp-up time and reducing load on other engineers. No special prompting required: ask questions directly.

350

351### Let Claude interview you

352

353<Tip>

354 For larger features, have Claude interview you first. Start with a minimal prompt and ask Claude to interview you using the `AskUserQuestion` tool.

355</Tip>

356

357Claude asks about things you might not have considered yet, including technical implementation, UI/UX, edge cases, and tradeoffs.

358

359```

360I want to build [brief description]. Interview me in detail using the AskUserQuestion tool.

361

362Ask about technical implementation, UI/UX, edge cases, concerns, and tradeoffs. Don't ask obvious questions, dig into the hard parts I might not have considered.

363

364Keep interviewing until we've covered everything, then write a complete spec to SPEC.md.

365```

366

367Once the spec is complete, start a fresh session to execute it. The new session has clean context focused entirely on implementation, and you have a written spec to reference.

368

369***

370

371## Manage your session

372

373Conversations are persistent and reversible. Use this to your advantage!

374

375### Course-correct early and often

376

377<Tip>

378 Correct Claude as soon as you notice it going off track.

379</Tip>

380

381The best results come from tight feedback loops. Though Claude occasionally solves problems perfectly on the first attempt, correcting it quickly generally produces better solutions faster.

382

383* **`Esc`**: Stop Claude mid-action with the `Esc` key. Context is preserved, so you can redirect.

384* **`Esc + Esc` or `/rewind`**: Press `Esc` twice or run `/rewind` to open the rewind menu and restore previous conversation and code state, or summarize from a selected message.

385* **`"Undo that"`**: Have Claude revert its changes.

386* **`/clear`**: Reset context between unrelated tasks. Long sessions with irrelevant context can reduce performance.

387

388If you've corrected Claude more than twice on the same issue in one session, the context is cluttered with failed approaches. Run `/clear` and start fresh with a more specific prompt that incorporates what you learned. A clean session with a better prompt almost always outperforms a long session with accumulated corrections.

389

390### Manage context aggressively

391

392<Tip>

393 Run `/clear` between unrelated tasks to reset context.

394</Tip>

395

396Claude Code automatically compacts conversation history when you approach context limits, which preserves important code and decisions while freeing space.

397

398During long sessions, Claude's context window can fill with irrelevant conversation, file contents, and commands. This can reduce performance and sometimes distract Claude.

399

400* Use `/clear` frequently between tasks to reset the context window entirely

401* When auto compaction triggers, Claude summarizes what matters most, including code patterns, file states, and key decisions

402* For more control, run `/compact <instructions>`, like `/compact Focus on the API changes`

403* To compact only part of the conversation, use `Esc + Esc` or `/rewind`, select a message checkpoint, and choose **Summarize from here**. This condenses messages from that point forward while keeping earlier context intact.

404* Customize compaction behavior in CLAUDE.md with instructions like `"When compacting, always preserve the full list of modified files and any test commands"` to ensure critical context survives summarization

405

406### Use subagents for investigation

407

408<Tip>

409 Delegate research with `"use subagents to investigate X"`. They explore in a separate context, keeping your main conversation clean for implementation.

410</Tip>

411

412Since context is your fundamental constraint, subagents are one of the most powerful tools available. When Claude researches a codebase it reads lots of files, all of which consume your context. Subagents run in separate context windows and report back summaries:

413

414```

415Use subagents to investigate how our authentication system handles token

416refresh, and whether we have any existing OAuth utilities I should reuse.

417```

418

419The subagent explores the codebase, reads relevant files, and reports back with findings, all without cluttering your main conversation.

420

421You can also use subagents for verification after Claude implements something:

422

423```

424use a subagent to review this code for edge cases

425```

426

427### Rewind with checkpoints

428

429<Tip>

430 Every action Claude makes creates a checkpoint. You can restore conversation, code, or both to any previous checkpoint.

431</Tip>

432

433Claude automatically checkpoints before changes. Double-tap `Escape` or run `/rewind` to open the rewind menu. You can restore conversation only, restore code only, restore both, or summarize from a selected message. See [Checkpointing](/en/checkpointing) for details.

434

435Instead of carefully planning every move, you can tell Claude to try something risky. If it doesn't work, rewind and try a different approach. Checkpoints persist across sessions, so you can close your terminal and still rewind later.

436

437<Warning>

438 Checkpoints only track changes made *by Claude*, not external processes. This isn't a replacement for git.

439</Warning>

440

441### Resume conversations

442

443<Tip>

444 Run `claude --continue` to pick up where you left off, or `--resume` to choose from recent sessions.

445</Tip>

446

447Claude Code saves conversations locally. When a task spans multiple sessions (you start a feature, get interrupted, come back the next day) you don't have to re-explain the context:

448

449```bash theme={null}

450claude --continue # Resume the most recent conversation

451claude --resume # Select from recent conversations

452```

453

454Use `/rename` to give sessions descriptive names (`"oauth-migration"`, `"debugging-memory-leak"`) so you can find them later. Treat sessions like branches. Different workstreams can have separate, persistent contexts.

455

456***

457

458## Automate and scale

459

460Once you're effective with one Claude, multiply your output with parallel sessions, headless mode, and fan-out patterns.

461

462Everything so far assumes one human, one Claude, and one conversation. But Claude Code scales horizontally. The techniques in this section show how you can get more done.

463

464### Run headless mode

465

466<Tip>

467 Use `claude -p "prompt"` in CI, pre-commit hooks, or scripts. Add `--output-format stream-json` for streaming JSON output.

468</Tip>

469

470With `claude -p "your prompt"`, you can run Claude headlessly, without an interactive session. Headless mode is how you integrate Claude into CI pipelines, pre-commit hooks, or any automated workflow. The output formats (plain text, JSON, streaming JSON) let you parse results programmatically.

471

472```bash theme={null}

473# One-off queries

474claude -p "Explain what this project does"

475

476# Structured output for scripts

477claude -p "List all API endpoints" --output-format json

478

479# Streaming for real-time processing

480claude -p "Analyze this log file" --output-format stream-json

481```

482

483### Run multiple Claude sessions

484

485<Tip>

486 Run multiple Claude sessions in parallel to speed up development, run isolated experiments, or start complex workflows.

487</Tip>

488

489There are three main ways to run parallel sessions:

490

491* [Claude Desktop](/en/desktop): Manage multiple local sessions visually. Each session gets its own isolated worktree.

492* [Claude Code on the web](/en/claude-code-on-the-web): Run on Anthropic's secure cloud infrastructure in isolated VMs.

493* [Agent teams](/en/agent-teams): Automated coordination of multiple sessions with shared tasks, messaging, and a team lead.

494

495Beyond parallelizing work, multiple sessions enable quality-focused workflows. A fresh context improves code review since Claude won't be biased toward code it just wrote.

496

497For example, use a Writer/Reviewer pattern:

498

499| Session A (Writer) | Session B (Reviewer) |

500| ----------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |

501| `Implement a rate limiter for our API endpoints` | |

502| | `Review the rate limiter implementation in @src/middleware/rateLimiter.ts. Look for edge cases, race conditions, and consistency with our existing middleware patterns.` |

503| `Here's the review feedback: [Session B output]. Address these issues.` | |

504

505You can do something similar with tests: have one Claude write tests, then another write code to pass them.

506

507### Fan out across files

508

509<Tip>

510 Loop through tasks calling `claude -p` for each. Use `--allowedTools` to scope permissions for batch operations.

511</Tip>

512

513For large migrations or analyses, you can distribute work across many parallel Claude invocations:

514

515<Steps>

516 <Step title="Generate a task list">

517 Have Claude list all files that need migrating (e.g., `list all 2,000 Python files that need migrating`)

518 </Step>

519

520 <Step title="Write a script to loop through the list">

521 ```bash theme={null}

522 for file in $(cat files.txt); do

523 claude -p "Migrate $file from React to Vue. Return OK or FAIL." \

524 --allowedTools "Edit,Bash(git commit *)"

525 done

526 ```

527 </Step>

528

529 <Step title="Test on a few files, then run at scale">

530 Refine your prompt based on what goes wrong with the first 2-3 files, then run on the full set. The `--allowedTools` flag restricts what Claude can do, which matters when you're running unattended.

531 </Step>

532</Steps>

533

534You can also integrate Claude into existing data/processing pipelines:

535

536```bash theme={null}

537claude -p "<your prompt>" --output-format json | your_command

538```

539

540Use `--verbose` for debugging during development, and turn it off in production.

541

542### Safe Autonomous Mode

543

544Use `claude --dangerously-skip-permissions` to bypass all permission checks and let Claude work uninterrupted. This works well for workflows like fixing lint errors or generating boilerplate code.

545

546<Warning>

547 Letting Claude run arbitrary commands is risky and can result in data loss, system corruption, or data exfiltration (e.g., via prompt injection attacks). To minimize these risks, use `--dangerously-skip-permissions` in a container without internet access.

548

549 With sandboxing enabled (`/sandbox`), you get similar autonomy with better security. Sandbox defines upfront boundaries rather than bypassing all checks.

550</Warning>

551

552***

553

554## Avoid common failure patterns

555

556These are common mistakes. Recognizing them early saves time:

557

558* **The kitchen sink session.** You start with one task, then ask Claude something unrelated, then go back to the first task. Context is full of irrelevant information.

559 > **Fix**: `/clear` between unrelated tasks.

560* **Correcting over and over.** Claude does something wrong, you correct it, it's still wrong, you correct again. Context is polluted with failed approaches.

561 > **Fix**: After two failed corrections, `/clear` and write a better initial prompt incorporating what you learned.

562* **The over-specified CLAUDE.md.** If your CLAUDE.md is too long, Claude ignores half of it because important rules get lost in the noise.

563 > **Fix**: Ruthlessly prune. If Claude already does something correctly without the instruction, delete it or convert it to a hook.

564* **The trust-then-verify gap.** Claude produces a plausible-looking implementation that doesn't handle edge cases.

565 > **Fix**: Always provide verification (tests, scripts, screenshots). If you can't verify it, don't ship it.

566* **The infinite exploration.** You ask Claude to "investigate" something without scoping it. Claude reads hundreds of files, filling the context.

567 > **Fix**: Scope investigations narrowly or use subagents so the exploration doesn't consume your main context.

568

569***

570

571## Develop your intuition

572

573The patterns in this guide aren't set in stone. They're starting points that work well in general, but might not be optimal for every situation.

574

575Sometimes you *should* let context accumulate because you're deep in one complex problem and the history is valuable. Sometimes you should skip planning and let Claude figure it out because the task is exploratory. Sometimes a vague prompt is exactly right because you want to see how Claude interprets the problem before constraining it.

576

577Pay attention to what works. When Claude produces great output, notice what you did: the prompt structure, the context you provided, the mode you were in. When Claude struggles, ask why. Was the context too noisy? The prompt too vague? The task too big for one pass?

578

579Over time, you'll develop intuition that no guide can capture. You'll know when to be specific and when to be open-ended, when to plan and when to explore, when to clear context and when to let it accumulate.

580

581## Related resources

582

583<CardGroup cols={2}>

584 <Card title="How Claude Code works" icon="gear" href="/en/how-claude-code-works">

585 Understand the agentic loop, tools, and context management

586 </Card>

587

588 <Card title="Extend Claude Code" icon="puzzle-piece" href="/en/features-overview">

589 Choose between skills, hooks, MCP, subagents, and plugins

590 </Card>

591

592 <Card title="Common workflows" icon="list-check" href="/en/common-workflows">

593 Step-by-step recipes for debugging, testing, PRs, and more

594 </Card>

595

596 <Card title="CLAUDE.md" icon="file-lines" href="/en/memory">

597 Store project conventions and persistent context

598 </Card>

599</CardGroup>

checkpointing.md +34 −14

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Checkpointing5# Checkpointing

2 6

~~3> Automatically track and rewind Claude's edits to quickly recover from unwanted changes.~~7> Track, rewind, and summarize Claude's edits and conversation to manage session state.

4 8

5Claude Code automatically tracks Claude's file edits as you work, allowing you to quickly undo changes and rewind to previous states if anything gets off track.9Claude Code automatically tracks Claude's file edits as you work, allowing you to quickly undo changes and rewind to previous states if anything gets off track.

6 10

16* Checkpoints persist across sessions, so you can access them in resumed conversations20* Checkpoints persist across sessions, so you can access them in resumed conversations

17* Automatically cleaned up along with sessions after 30 days (configurable)21* Automatically cleaned up along with sessions after 30 days (configurable)

18 22

~~19### Rewinding changes~~23### Rewind and summarize

25Press `Esc` twice (`Esc` + `Esc`) or use the `/rewind` command to open the rewind menu. A scrollable list shows each of your prompts from the session. Select the point you want to act on, then choose an action:

27* **Restore code and conversation**: revert both code and conversation to that point

28* **Restore conversation**: rewind to that message while keeping current code

29* **Restore code**: revert file changes while keeping the conversation

30* **Summarize from here**: compress the conversation from this point forward into a summary, freeing context window space

31* **Never mind**: return to the message list without making changes

33After restoring the conversation or summarizing, the original prompt from the selected message is restored into the input field so you can re-send or edit it.

35#### Restore vs. summarize

20 36

~~21Press `Esc` twice (`Esc` + `Esc`) or use the `/rewind` command to open up the rewind menu. You can choose to restore:~~37The three restore options revert state: they undo code changes, conversation history, or both. "Summarize from here" works differently:

22 38

~~23* **Conversation only**: Rewind to a user message while keeping code changes~~39* Messages before the selected message stay intact

~~24* **Code only**: Revert file changes while keeping the conversation~~40* The selected message and all subsequent messages get replaced with a compact AI-generated summary

~~25* **Both code and conversation**: Restore both to a prior point in the session~~41* No files on disk are changed

42* The original messages are preserved in the session transcript, so Claude can reference the details if needed

44This is similar to `/compact`, but targeted: instead of summarizing the entire conversation, you keep early context in full detail and only compress the parts that are using up space. You can type optional instructions to guide what the summary focuses on.

46<Note>

47 Summarize keeps you in the same session and compresses context. If you want to branch off and try a different approach while preserving the original session intact, use [fork](/en/how-claude-code-works#resume-or-fork-sessions) instead (`claude --continue --fork-session`).

48</Note>

26 49

27## Common use cases50## Common use cases

28 51

29Checkpoints are particularly useful when:52Checkpoints are particularly useful when:

30 53

~~31* **Exploring alternatives**: Try different implementation approaches without losing your starting point~~54* **Exploring alternatives**: try different implementation approaches without losing your starting point

~~32* **Recovering from mistakes**: Quickly undo changes that introduced bugs or broke functionality~~55* **Recovering from mistakes**: quickly undo changes that introduced bugs or broke functionality

~~33* **Iterating on features**: Experiment with variations knowing you can revert to working states~~56* **Iterating on features**: experiment with variations knowing you can revert to working states

57* **Freeing context space**: summarize a verbose debugging session from the midpoint forward, keeping your initial instructions intact

34 58

35## Limitations59## Limitations

36 60

61## See also85## See also

62 86

63* [Interactive mode](/en/interactive-mode) - Keyboard shortcuts and session controls87* [Interactive mode](/en/interactive-mode) - Keyboard shortcuts and session controls

~~64* [Slash commands](/en/slash-commands) - Accessing checkpoints using `/rewind`~~88* [Built-in commands](/en/interactive-mode#built-in-commands) - Accessing checkpoints using `/rewind`

65* [CLI reference](/en/cli-reference) - Command-line options89* [CLI reference](/en/cli-reference) - Command-line options

~~69> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt~~

chrome.md +223 −0 added

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

5# Use Claude Code with Chrome (beta)

7> Connect Claude Code to your Chrome browser to test web apps, debug with console logs, automate form filling, and extract data from web pages.

9Claude Code integrates with the Claude in Chrome browser extension to give you browser automation capabilities from the CLI or the [VS Code extension](/en/vs-code#automate-browser-tasks-with-chrome). Build your code, then test and debug in the browser without switching contexts.

11Claude opens new tabs for browser tasks and shares your browser's login state, so it can access any site you're already signed into. Browser actions run in a visible Chrome window in real time. When Claude encounters a login page or CAPTCHA, it pauses and asks you to handle it manually.

13<Note>

14 Chrome integration is in beta and currently works with Google Chrome only. It is not yet supported on Brave, Arc, or other Chromium-based browsers. WSL (Windows Subsystem for Linux) is also not supported.

15</Note>

17## Capabilities

19With Chrome connected, you can chain browser actions with coding tasks in a single workflow:

21* **Live debugging**: read console errors and DOM state directly, then fix the code that caused them

22* **Design verification**: build a UI from a Figma mock, then open it in the browser to verify it matches

23* **Web app testing**: test form validation, check for visual regressions, or verify user flows

24* **Authenticated web apps**: interact with Google Docs, Gmail, Notion, or any app you're logged into without API connectors

25* **Data extraction**: pull structured information from web pages and save it locally

26* **Task automation**: automate repetitive browser tasks like data entry, form filling, or multi-site workflows

27* **Session recording**: record browser interactions as GIFs to document or share what happened

29## Prerequisites

31Before using Claude Code with Chrome, you need:

33* [Google Chrome](https://www.google.com/chrome/) browser

34* [Claude in Chrome extension](https://chromewebstore.google.com/detail/claude/fcoeoabgfenejglbffodgkkbkcdhcgfn) version 1.0.36 or higher

35* [Claude Code](/en/quickstart#step-1-install-claude-code) version 2.0.73 or higher

36* A direct Anthropic plan (Pro, Max, Team, or Enterprise)

38<Note>

39 Chrome integration is not available through third-party providers like Amazon Bedrock, Google Cloud Vertex AI, or Microsoft Foundry. If you access Claude exclusively through a third-party provider, you need a separate claude.ai account to use this feature.

40</Note>

42## Get started in the CLI

44<Steps>

45 <Step title="Launch Claude Code with Chrome">

46 Start Claude Code with the `--chrome` flag:

48 ```bash theme={null}

49 claude --chrome

50 ```

52 You can also enable Chrome from within an existing session by running `/chrome`.

53 </Step>

55 <Step title="Ask Claude to use the browser">

56 This example navigates to a page, interacts with it, and reports what it finds, all from your terminal or editor:

58 ```text theme={null}

59 Go to code.claude.com/docs, click on the search box,

60 type "hooks", and tell me what results appear

61 ```

62 </Step>

63</Steps>

65Run `/chrome` at any time to check the connection status, manage permissions, or reconnect the extension.

67For VS Code, see [browser automation in VS Code](/en/vs-code#automate-browser-tasks-with-chrome).

69### Enable Chrome by default

71To avoid passing `--chrome` each session, run `/chrome` and select "Enabled by default".

73In the [VS Code extension](/en/vs-code#automate-browser-tasks-with-chrome), Chrome is available whenever the Chrome extension is installed. No additional flag is needed.

75<Note>

76 Enabling Chrome by default in the CLI increases context usage since browser tools are always loaded. If you notice increased context consumption, disable this setting and use `--chrome` only when needed.

77</Note>

79### Manage site permissions

81Site-level permissions are inherited from the Chrome extension. Manage permissions in the Chrome extension settings to control which sites Claude can browse, click, and type on.

83## Example workflows

85These examples show common ways to combine browser actions with coding tasks. Run `/mcp` and select `claude-in-chrome` to see the full list of available browser tools.

87### Test a local web application

89When developing a web app, ask Claude to verify your changes work correctly:

91```text theme={null}

92I just updated the login form validation. Can you open localhost:3000,

93try submitting the form with invalid data, and check if the error

94messages appear correctly?

95```

97Claude navigates to your local server, interacts with the form, and reports what it observes.

99### Debug with console logs

100

101Claude can read console output to help diagnose problems. Tell Claude what patterns to look for rather than asking for all console output, since logs can be verbose:

102

103```text theme={null}

104Open the dashboard page and check the console for any errors when

105the page loads.

106```

107

108Claude reads the console messages and can filter for specific patterns or error types.

109

110### Automate form filling

111

112Speed up repetitive data entry tasks:

113

114```text theme={null}

115I have a spreadsheet of customer contacts in contacts.csv. For each row,

116go to the CRM at crm.example.com, click "Add Contact", and fill in the

117name, email, and phone fields.

118```

119

120Claude reads your local file, navigates the web interface, and enters the data for each record.

121

122### Draft content in Google Docs

123

124Use Claude to write directly in your documents without API setup:

125

126```text theme={null}

127Draft a project update based on the recent commits and add it to my

128Google Doc at docs.google.com/document/d/abc123

129```

130

131Claude opens the document, clicks into the editor, and types the content. This works with any web app you're logged into: Gmail, Notion, Sheets, and more.

132

133### Extract data from web pages

134

135Pull structured information from websites:

136

137```text theme={null}

138Go to the product listings page and extract the name, price, and

139availability for each item. Save the results as a CSV file.

140```

141

142Claude navigates to the page, reads the content, and compiles the data into a structured format.

143

144### Run multi-site workflows

145

146Coordinate tasks across multiple websites:

147

148```text theme={null}

149Check my calendar for meetings tomorrow, then for each meeting with

150an external attendee, look up their company website and add a note

151about what they do.

152```

153

154Claude works across tabs to gather information and complete the workflow.

155

156### Record a demo GIF

157

158Create shareable recordings of browser interactions:

159

160```text theme={null}

161Record a GIF showing how to complete the checkout flow, from adding

162an item to the cart through to the confirmation page.

163```

164

165Claude records the interaction sequence and saves it as a GIF file.

166

167## Troubleshooting

168

169### Extension not detected

170

171If Claude Code shows "Chrome extension not detected":

172

1731. Verify the Chrome extension is installed and enabled in `chrome://extensions`

1742. Verify Claude Code is up to date by running `claude --version`

1753. Check that Chrome is running

1764. Run `/chrome` and select "Reconnect extension" to re-establish the connection

1775. If the issue persists, restart both Claude Code and Chrome

178

179The first time you enable Chrome integration, Claude Code installs a native messaging host configuration file. Chrome reads this file on startup, so if the extension isn't detected on your first attempt, restart Chrome to pick up the new configuration.

180

181If the connection still fails, verify the host configuration file exists at:

182

183* **macOS**: `~/Library/Application Support/Google/Chrome/NativeMessagingHosts/com.anthropic.claude_code_browser_extension.json`

184* **Linux**: `~/.config/google-chrome/NativeMessagingHosts/com.anthropic.claude_code_browser_extension.json`

185* **Windows**: check `HKCU\Software\Google\Chrome\NativeMessagingHosts\` in the Windows Registry

186

187### Browser not responding

188

189If Claude's browser commands stop working:

190

1911. Check if a modal dialog (alert, confirm, prompt) is blocking the page. JavaScript dialogs block browser events and prevent Claude from receiving commands. Dismiss the dialog manually, then tell Claude to continue.

1922. Ask Claude to create a new tab and try again

1933. Restart the Chrome extension by disabling and re-enabling it in `chrome://extensions`

194

195### Connection drops during long sessions

196

197The Chrome extension's service worker can go idle during extended sessions, which breaks the connection. If browser tools stop working after a period of inactivity, run `/chrome` and select "Reconnect extension".

198

199### Windows-specific issues

200

201On Windows, you may encounter:

202

203* **Named pipe conflicts (EADDRINUSE)**: if another process is using the same named pipe, restart Claude Code. Close any other Claude Code sessions that might be using Chrome.

204* **Native messaging host errors**: if the native messaging host crashes on startup, try reinstalling Claude Code to regenerate the host configuration.

205

206### Common error messages

207

208These are the most frequently encountered errors and how to resolve them:

209

210| Error | Cause | Fix |

211| ------------------------------------ | ------------------------------------------------ | --------------------------------------------------------------- |

212| "Browser extension is not connected" | Native messaging host cannot reach the extension | Restart Chrome and Claude Code, then run `/chrome` to reconnect |

213| "Extension not detected" | Chrome extension is not installed or is disabled | Install or enable the extension in `chrome://extensions` |

214| "No tab available" | Claude tried to act before a tab was ready | Ask Claude to create a new tab and retry |

215| "Receiving end does not exist" | Extension service worker went idle | Run `/chrome` and select "Reconnect extension" |

216

217## See also

218

219* [Use Claude Code in VS Code](/en/vs-code#automate-browser-tasks-with-chrome): browser automation in the VS Code extension

220* [CLI reference](/en/cli-reference): command-line flags including `--chrome`

221* [Common workflows](/en/common-workflows): more ways to use Claude Code

222* [Data and privacy](/en/data-usage): how Claude Code handles your data

223* [Getting started with Claude in Chrome](https://support.claude.com/en/articles/12012173-getting-started-with-claude-in-chrome): full documentation for the Chrome extension, including shortcuts, scheduling, and permissions

claude-code-on-the-web.md +139 −15

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Claude Code on the web5# Claude Code on the web

2 6

3> Run Claude Code tasks asynchronously on secure cloud infrastructure7> Run Claude Code tasks asynchronously on secure cloud infrastructure

16* **Repositories not on your local machine**: Work on code you don't have checked out locally20* **Repositories not on your local machine**: Work on code you don't have checked out locally

17* **Backend changes**: Where Claude Code can write tests and then write code to pass those tests21* **Backend changes**: Where Claude Code can write tests and then write code to pass those tests

18 22

~~19Claude Code is also available on the Claude iOS app. This is perfect for:~~23Claude Code is also available on the Claude iOS app for kicking off tasks on the go and monitoring work in progress.

~~21* **On the go**: Kick off tasks while commuting or away from laptop~~

~~22* **Monitoring**: Watch the trajectory and steer the agent's work~~

23 24

~~24Developers can also move Claude Code sessions from the Claude app to their terminal to continue tasks locally.~~25You can move between local and remote development: [send tasks from your terminal to run on the web](#from-terminal-to-web) with the `&` prefix, or [teleport web sessions back to your terminal](#from-web-to-terminal) to continue locally.

25 26

26## Who can use Claude Code on the web?27## Who can use Claude Code on the web?

27 28

393. Install the Claude GitHub app in your repositories403. Install the Claude GitHub app in your repositories

404. Select your default environment414. Select your default environment

415. Submit your coding task425. Submit your coding task

~~426. Review changes and create a pull request in GitHub~~436. Review changes in diff view, iterate with comments, then create a pull request

43 44

44## How it works45## How it works

45 46

525. **Completion**: You're notified when finished and can create a PR with the changes535. **Completion**: You're notified when finished and can create a PR with the changes

536. **Results**: Changes are pushed to a branch, ready for pull request creation546. **Results**: Changes are pushed to a branch, ready for pull request creation

54 55

56## Review changes with diff view

58Diff view lets you see exactly what Claude changed before creating a pull request. Instead of clicking "Create PR" to review changes in GitHub, view the diff directly in the app and iterate with Claude until the changes are ready.

60When Claude makes changes to files, a diff stats indicator appears showing the number of lines added and removed (for example, `+12 -1`). Select this indicator to open the diff viewer, which displays a file list on the left and the changes for each file on the right.

62From the diff view, you can:

64* Review changes file by file

65* Comment on specific changes to request modifications

66* Continue iterating with Claude based on what you see

68This lets you refine changes through multiple rounds of feedback without creating draft PRs or switching to GitHub.

55## Moving tasks between web and terminal70## Moving tasks between web and terminal

56 71

72You can start tasks on the web and continue them in your terminal, or send tasks from your terminal to run on the web. Web sessions persist even if you close your laptop, and you can monitor them from anywhere including the Claude iOS app.

74<Note>

75 Session handoff is one-way: you can pull web sessions into your terminal, but you can't push an existing terminal session to the web. The [`&` prefix](#from-terminal-to-web) creates a *new* web session with your current conversation context.

76</Note>

78### From terminal to web

80Start a message with `&` inside Claude Code to send a task to run on the web:

82```

83& Fix the authentication bug in src/auth/login.ts

84```

86This creates a new web session on claude.ai with your current conversation context. The task runs in the cloud while you continue working locally. Use `/tasks` to check progress, or open the session on claude.ai or the Claude iOS app to interact directly. From there you can steer Claude, provide feedback, or answer questions just like any other conversation.

88You can also start a web session directly from the command line:

90```bash theme={null}

91claude --remote "Fix the authentication bug in src/auth/login.ts"

92```

94#### Tips for background tasks

96**Plan locally, execute remotely**: For complex tasks, start Claude in plan mode to collaborate on the approach before sending work to the web:

98```bash theme={null}

99claude --permission-mode plan

100```

101

102In plan mode, Claude can only read files and explore the codebase. Once you're satisfied with the plan, send it to the web for autonomous execution:

103

104```

105& Execute the migration plan we discussed

106```

107

108This pattern gives you control over the strategy while letting Claude execute autonomously in the cloud.

109

110**Run tasks in parallel**: Each `&` command creates its own web session that runs independently. You can kick off multiple tasks and they'll all run simultaneously in separate sessions:

111

112```

113& Fix the flaky test in auth.spec.ts

114& Update the API documentation

115& Refactor the logger to use structured output

116```

117

118Monitor all sessions with `/tasks`. When a session completes, you can create a PR from the web interface or [teleport](#from-web-to-terminal) the session to your terminal to continue working.

119

57### From web to terminal120### From web to terminal

58 121

~~59After starting a task on the web:~~122There are several ways to pull a web session into your terminal:

123

124* **Using `/teleport`**: From within Claude Code, run `/teleport` (or `/tp`) to see an interactive picker of your web sessions. If you have uncommitted changes, you'll be prompted to stash them first.

125* **Using `--teleport`**: From the command line, run `claude --teleport` for an interactive session picker, or `claude --teleport <session-id>` to resume a specific session directly.

126* **From `/tasks`**: Run `/tasks` to see your background sessions, then press `t` to teleport into one

127* **From the web interface**: Click "Open in CLI" to copy a command you can paste into your terminal

128

129When you teleport a session, Claude verifies you're in the correct repository, fetches and checks out the branch from the remote session, and loads the full conversation history into your terminal.

130

131#### Requirements for teleporting

132

133Teleport checks these requirements before resuming a session. If any requirement isn't met, you'll see an error or be prompted to resolve the issue.

134

135| Requirement | Details |

136| ------------------ | ---------------------------------------------------------------------------------------------------------------------- |

137| Clean git state | Your working directory must have no uncommitted changes. Teleport prompts you to stash changes if needed. |

138| Correct repository | You must run `--teleport` from a checkout of the same repository, not a fork. |

139| Branch available | The branch from the web session must have been pushed to the remote. Teleport automatically fetches and checks it out. |

140| Same account | You must be authenticated to the same Claude.ai account used in the web session. |

60 141

~~611. Click the "Open in CLI" button~~142### Sharing sessions

~~622. Paste and run the command in your terminal in a checkout of the repo~~143

~~633. Any existing local changes will be stashed, and the remote session will be loaded~~144To share a session, toggle its visibility according to the account

~~644. Continue working locally~~145types below. After that, share the session link as-is. Recipients who open your

146shared session will see the latest state of the session upon load, but the

147recipient's page will not update in real time.

148

149#### Sharing from an Enterprise or Teams account

150

151For Enterprise and Teams accounts, the two visibility options are **Private**

152and **Team**. Team visibility makes the session visible to other members of your

153Claude.ai organization. Repository access verification is enabled by default,

154based on the GitHub account connected to the recipient's account. Your account's

155display name is visible to all recipients with access. [Claude in Slack](/en/slack)

156sessions are automatically shared with Team visibility.

157

158#### Sharing from a Max or Pro account

159

160For Max and Pro accounts, the two visibility options are **Private**

161and **Public**. Public visibility makes the session visible to any user logged

162into claude.ai.

163

164Check your session for sensitive content before sharing. Sessions may contain

165code and credentials from private GitHub repositories. Repository access

166verification is not enabled by default.

167

168Enable repository access verification and/or withhold your name from your shared

169sessions by going to Settings > Claude Code > Sharing settings.

65 170

66## Cloud environment171## Cloud environment

67 172

127 232

128**To update an existing environment:** Select the current environment, to the right of the environment name, and select the settings button. This will open a dialog where you can update the environment name, network access, and environment variables.233**To update an existing environment:** Select the current environment, to the right of the environment name, and select the settings button. This will open a dialog where you can update the environment name, network access, and environment variables.

129 234

235**To select your default environment from the terminal:** If you have multiple environments configured, run `/remote-env` to choose which one to use when starting web sessions from your terminal with `&` or `--remote`. With a single environment, this command shows your current configuration.

236

130<Note>237<Note>

131 Environment variables must be specified as key-value pairs, in [`.env` format](https://www.dotenv.org/). For example:238 Environment variables must be specified as key-value pairs, in [`.env` format](https://www.dotenv.org/). For example:

132 239

223 330

224* api.anthropic.com331* api.anthropic.com

225* statsig.anthropic.com332* statsig.anthropic.com

333* platform.claude.com

334* code.claude.com

226* claude.ai335* claude.ai

227 336

228#### Version Control337#### Version Control

230* github.com339* github.com

231* [www.github.com](http://www.github.com)340* [www.github.com](http://www.github.com)

232* api.github.com341* api.github.com

342* npm.pkg.github.com

233* raw\.githubusercontent.com343* raw\.githubusercontent.com

344* pkg-npm.githubusercontent.com

234* objects.githubusercontent.com345* objects.githubusercontent.com

235* codeload.github.com346* codeload.github.com

236* avatars.githubusercontent.com347* avatars.githubusercontent.com

252* [www.docker.com](http://www.docker.com)363* [www.docker.com](http://www.docker.com)

253* production.cloudflare.docker.com364* production.cloudflare.docker.com

254* download.docker.com365* download.docker.com

366* gcr.io

255* \*.gcr.io367* \*.gcr.io

256* ghcr.io368* ghcr.io

257* mcr.microsoft.com369* mcr.microsoft.com

258* \*.data.mcr.microsoft.com370* \*.data.mcr.microsoft.com

371* public.ecr.aws

259 372

260#### Cloud Platforms373#### Cloud Platforms

261 374

276* dot.net389* dot.net

277* visualstudio.com390* visualstudio.com

278* dev.azure.com391* dev.azure.com

392* \*.amazonaws.com

393* \*.api.aws

279* oracle.com394* oracle.com

280* [www.oracle.com](http://www.oracle.com)395* [www.oracle.com](http://www.oracle.com)

281* java.com396* java.com

325 440

326* crates.io441* crates.io

327* [www.crates.io](http://www.crates.io)442* [www.crates.io](http://www.crates.io)

443* index.crates.io

328* static.crates.io444* static.crates.io

329* rustup.rs445* rustup.rs

330* static.rust-lang.org446* static.rust-lang.org

350* gradle.org466* gradle.org

351* [www.gradle.org](http://www.gradle.org)467* [www.gradle.org](http://www.gradle.org)

352* services.gradle.org468* services.gradle.org

469* plugins.gradle.org

470* kotlin.org

471* [www.kotlin.org](http://www.kotlin.org)

353* spring.io472* spring.io

354* repo.spring.io473* repo.spring.io

355 474

423* statsig.com542* statsig.com

424* [www.statsig.com](http://www.statsig.com)543* [www.statsig.com](http://www.statsig.com)

425* api.statsig.com544* api.statsig.com

545* sentry.io

426* \*.sentry.io546* \*.sentry.io

547* http-intake.logs.datadoghq.com

548* \*.datadoghq.com

549* \*.datadoghq.eu

427 550

428#### Content Delivery & Mirrors551#### Content Delivery & Mirrors

429 552

553* sourceforge.net

430* \*.sourceforge.net554* \*.sourceforge.net

431* packagecloud.io555* packagecloud.io

432* \*.packagecloud.io556* \*.packagecloud.io

438* json.schemastore.org562* json.schemastore.org

439* [www.schemastore.org](http://www.schemastore.org)563* [www.schemastore.org](http://www.schemastore.org)

440 564

565#### Model Context Protocol

566

567* \*.modelcontextprotocol.io

568

441<Note>569<Note>

442 Domains marked with `*` indicate wildcard subdomain matching. For example, `*.gcr.io` allows access to any subdomain of `gcr.io`.570 Domains marked with `*` indicate wildcard subdomain matching. For example, `*.gcr.io` allows access to any subdomain of `gcr.io`.

443</Note>571</Note>

482* [Settings reference](/en/settings)610* [Settings reference](/en/settings)

483* [Security](/en/security)611* [Security](/en/security)

484* [Data usage](/en/data-usage)612* [Data usage](/en/data-usage)

~~485~~

~~486~~

~~487~~

488> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

cli-reference.md +49 −33

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# CLI reference5# CLI reference

2 6

3> Complete reference for Claude Code command-line interface, including commands and flags.7> Complete reference for Claude Code command-line interface, including commands and flags.

5## CLI commands9## CLI commands

6 10

~~8| :--------------------------------- | :--------------------------------------------- | :------------------------------------------------ |~~12| :------------------------------ | :----------------------------------------------------- | :------------------------------------------------ |

18 22

21Customize Claude Code's behavior with these command-line flags:25Customize Claude Code's behavior with these command-line flags:

22 26

24| :------------------------------- | :------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | :------------------------------------------------------------------------------------------------- |28| :------------------------------------- | :-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | :------------------------------------------------------------------------------------------------- |

27| `--agents` | Define custom [subagents](/en/sub-agents) dynamically via JSON (see below for format) | `claude --agents '{"reviewer":{"description":"Reviews code","prompt":"You are a code reviewer"}}'` |31| `--agents` | Define custom [subagents](/en/sub-agents) dynamically via JSON (see below for format) | `claude --agents '{"reviewer":{"description":"Reviews code","prompt":"You are a code reviewer"}}'` |

28| `--allowedTools` | Tools that execute without prompting for permission. To restrict which tools are available, use `--tools` instead | `"Bash(git log:*)" "Bash(git diff:*)" "Read"` |32| `--allow-dangerously-skip-permissions` | Enable permission bypassing as an option without immediately activating it. Allows composing with `--permission-mode` (use with caution) | `claude --permission-mode plan --allow-dangerously-skip-permissions` |

33| `--allowedTools` | Tools that execute without prompting for permission. See [permission rule syntax](/en/settings#permission-rule-syntax) for pattern matching. To restrict which tools are available, use `--tools` instead | `"Bash(git log *)" "Bash(git diff *)" "Read"` |

29| `--append-system-prompt` | Append custom text to the end of the default system prompt (works in both interactive and print modes) | `claude --append-system-prompt "Always use TypeScript"` |34| `--append-system-prompt` | Append custom text to the end of the default system prompt (works in both interactive and print modes) | `claude --append-system-prompt "Always use TypeScript"` |

35| `--append-system-prompt-file` | Load additional system prompt text from a file and append to the default prompt (print mode only) | `claude -p --append-system-prompt-file ./extra-rules.txt "query"` |

37| `--chrome` | Enable [Chrome browser integration](/en/chrome) for web automation and testing | `claude --chrome` |

42| `--disallowedTools` | Tools that are removed from the model's context and cannot be used | `"Bash(git log *)" "Bash(git diff *)" "Edit"` |

36| `--fork-session` | When resuming, create a new session ID instead of reusing the original (use with `--resume` or `--continue`) | `claude --resume abc123 --fork-session` |44| `--fork-session` | When resuming, create a new session ID instead of reusing the original (use with `--resume` or `--continue`) | `claude --resume abc123 --fork-session` |

45| `--from-pr` | Resume sessions linked to a specific GitHub PR. Accepts a PR number or URL. Sessions are automatically linked when created via `gh pr create` | `claude --from-pr 123` |

37| `--ide` | Automatically connect to IDE on startup if exactly one valid IDE is available | `claude --ide` |46| `--ide` | Automatically connect to IDE on startup if exactly one valid IDE is available | `claude --ide` |

47| `--init` | Run initialization hooks and start interactive mode | `claude --init` |

48| `--init-only` | Run initialization hooks and exit (no interactive session) | `claude --init-only` |

38| `--include-partial-messages` | Include partial streaming events in output (requires `--print` and `--output-format=stream-json`) | `claude -p --output-format stream-json --include-partial-messages "query"` |49| `--include-partial-messages` | Include partial streaming events in output (requires `--print` and `--output-format=stream-json`) | `claude -p --output-format stream-json --include-partial-messages "query"` |

40| `--json-schema` | Get validated JSON output matching a JSON Schema after agent completes its workflow (print mode only, see [Agent SDK Structured Outputs](https://docs.claude.com/en/docs/agent-sdk/structured-outputs)) | `claude -p --json-schema '{"type":"object","properties":{...}}' "query"` |51| `--json-schema` | Get validated JSON output matching a JSON Schema after agent completes its workflow (print mode only, see [structured outputs](https://platform.claude.com/docs/en/agent-sdk/structured-outputs)) | `claude -p --json-schema '{"type":"object","properties":{...}}' "query"` |

53| `--max-budget-usd` | Maximum dollar amount to spend on API calls before stopping (print mode only) | `claude -p --max-budget-usd 5.00 "query"` |

54| `--max-turns` | Limit the number of agentic turns (print mode only). Exits with an error when the limit is reached. No limit by default | `claude -p --max-turns 3 "query"` |

43| `--model` | Sets the model for the current session with an alias for the latest model (`sonnet` or `opus`) or a model's full name | `claude --model claude-sonnet-4-5-20250929` |56| `--model` | Sets the model for the current session with an alias for the latest model (`sonnet` or `opus`) or a model's full name | `claude --model claude-sonnet-4-5-20250929` |

57| `--no-chrome` | Disable [Chrome browser integration](/en/chrome) for this session | `claude --no-chrome` |

58| `--no-session-persistence` | Disable session persistence so sessions are not saved to disk and cannot be resumed (print mode only) | `claude -p --no-session-persistence "query"` |

48| `--print`, `-p` | Print response without interactive mode (see [SDK documentation](https://docs.claude.com/en/docs/agent-sdk) for programmatic usage details) | `claude -p "query"` |63| `--print`, `-p` | Print response without interactive mode (see [Agent SDK documentation](https://platform.claude.com/docs/en/agent-sdk/overview) for programmatic usage details) | `claude -p "query"` |

65| `--resume`, `-r` | Resume a specific session by ID or name, or show an interactive picker to choose a session | `claude --resume auth-refactor` |

73| `--teammate-mode` | Set how [agent team](/en/agent-teams) teammates display: `auto` (default), `in-process`, or `tmux`. See [set up agent teams](/en/agent-teams#set-up-agent-teams) | `claude --teammate-mode in-process` |

74| `--tools` | Restrict which built-in tools Claude can use (works in both interactive and print modes). Use `""` to disable all, `"default"` for all, or tool names like `"Bash,Edit,Read"` | `claude --tools "Bash,Edit,Read"` |

59 77

67The `--agents` flag accepts a JSON object that defines one or more custom subagents. Each subagent requires a unique name (as the key) and a definition object with the following fields:85The `--agents` flag accepts a JSON object that defines one or more custom subagents. Each subagent requires a unique name (as the key) and a definition object with the following fields:

68 86

~~70| :------------ | :------- | :--------------------------------------------------------------------------------------------------------------------- |~~88| :---------------- | :------- | :----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |

71| `description` | Yes | Natural language description of when the subagent should be invoked |89| `description` | Yes | Natural language description of when the subagent should be invoked |

72| `prompt` | Yes | The system prompt that guides the subagent's behavior |90| `prompt` | Yes | The system prompt that guides the subagent's behavior |

~~73| `tools` | No | Array of specific tools the subagent can use (for example, `["Read", "Edit", "Bash"]`). If omitted, inherits all tools |~~91| `tools` | No | Array of specific tools the subagent can use, for example `["Read", "Edit", "Bash"]`. If omitted, inherits all tools. Supports [`Task(agent_type)`](/en/sub-agents#restrict-which-subagents-can-be-spawned) syntax |

~~74| `model` | No | Model alias to use: `sonnet`, `opus`, or `haiku`. If omitted, uses the default subagent model |~~92| `disallowedTools` | No | Array of tool names to explicitly deny for this subagent |

93| `model` | No | Model alias to use: `sonnet`, `opus`, `haiku`, or `inherit`. If omitted, defaults to `inherit` |

94| `skills` | No | Array of [skill](/en/skills) names to preload into the subagent's context |

95| `mcpServers` | No | Array of [MCP servers](/en/mcp) for this subagent. Each entry is a server name string or a `{name: config}` object |

96| `maxTurns` | No | Maximum number of agentic turns before the subagent stops |

75 97

76Example:98Example:

77 99

94 116

95### System prompt flags117### System prompt flags

96 118

~~97Claude Code provides three flags for customizing the system prompt, each serving a different purpose:~~119Claude Code provides four flags for customizing the system prompt, each serving a different purpose:

98 120

100| :----------------------- | :--------------------------------- | :------------------ | :------------------------------------------------------------------- |122| :---------------------------- | :------------------------------------------ | :------------------ | :------------------------------------------------------------------- |

104 127

105**When to use each:**128**When to use each:**

106 129

119 claude --append-system-prompt "Always use TypeScript and include JSDoc comments"142 claude --append-system-prompt "Always use TypeScript and include JSDoc comments"

120 ```143 ```

121 144

122<Note>145* **`--append-system-prompt-file`**: Use when you want to append instructions from a file while keeping Claude Code's defaults. Useful for version-controlled additions.

123 `--system-prompt` and `--system-prompt-file` are mutually exclusive. You cannot use both flags simultaneously.146 ```bash theme={null}

124</Note>147 claude -p --append-system-prompt-file ./prompts/style-rules.txt "Review this PR"

148 ```

125 149

126<Tip>150`--system-prompt` and `--system-prompt-file` are mutually exclusive. The append flags can be used together with either replacement flag.

127 For most use cases, `--append-system-prompt` is recommended as it preserves Claude Code's built-in capabilities while adding your custom requirements. Use `--system-prompt` or `--system-prompt-file` only when you need complete control over the system prompt.

128</Tip>

129 151

130For detailed information about print mode (`-p`) including output formats,152For most use cases, `--append-system-prompt` or `--append-system-prompt-file` is recommended as they preserve Claude Code's built-in capabilities while adding your custom requirements. Use `--system-prompt` or `--system-prompt-file` only when you need complete control over the system prompt.

131streaming, verbose logging, and programmatic usage, see the

132[SDK documentation](https://docs.claude.com/en/docs/agent-sdk).

133 153

134## See also154## See also

135 155

156* [Chrome extension](/en/chrome) - Browser automation and web testing

136* [Interactive mode](/en/interactive-mode) - Shortcuts, input modes, and interactive features157* [Interactive mode](/en/interactive-mode) - Shortcuts, input modes, and interactive features

137* [Slash commands](/en/slash-commands) - Interactive session commands

138* [Quickstart guide](/en/quickstart) - Getting started with Claude Code158* [Quickstart guide](/en/quickstart) - Getting started with Claude Code

139* [Common workflows](/en/common-workflows) - Advanced workflows and patterns159* [Common workflows](/en/common-workflows) - Advanced workflows and patterns

140* [Settings](/en/settings) - Configuration options160* [Settings](/en/settings) - Configuration options

141* [SDK documentation](https://docs.claude.com/en/docs/agent-sdk) - Programmatic usage and integrations161* [Agent SDK documentation](https://platform.claude.com/docs/en/agent-sdk/overview) - Programmatic usage and integrations

~~142~~

~~143~~

~~144~~

145> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

common-workflows.md +118 −211

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Common workflows5# Common workflows

2 6

~~3> Learn about common workflows with Claude Code.~~7> Step-by-step guides for exploring codebases, fixing bugs, refactoring, testing, and other everyday tasks with Claude Code.

4 8

~~5Each task in this document includes clear instructions, example commands, and best practices to help you get the most from Claude Code.~~9This page covers practical workflows for everyday development: exploring unfamiliar code, debugging, refactoring, writing tests, creating PRs, and managing sessions. Each section includes example prompts you can adapt to your own projects. For higher-level patterns and tips, see [Best practices](/en/best-practices).

6 10

7## Understand new codebases11## Understand new codebases

8 12

81 85

82 * Be specific about what you're looking for86 * Be specific about what you're looking for

83 * Use domain language from the project87 * Use domain language from the project

88 * Install a [code intelligence plugin](/en/discover-plugins#code-intelligence) for your language to give Claude precise "go to definition" and "find references" navigation

84</Tip>89</Tip>

85 90

86***91***

221 226

222## Use Plan Mode for safe code analysis227## Use Plan Mode for safe code analysis

223 228

224Plan Mode instructs Claude to create a plan by analyzing the codebase with read-only operations, perfect for exploring codebases, planning complex changes, or reviewing code safely.229Plan Mode instructs Claude to create a plan by analyzing the codebase with read-only operations, perfect for exploring codebases, planning complex changes, or reviewing code safely. In Plan Mode, Claude uses [`AskUserQuestion`](/en/settings#tools-available-to-claude) to gather requirements and clarify your goals before proposing a plan.

225 230

226### When to use Plan Mode231### When to use Plan Mode

227 232

235 240

236You can switch into Plan Mode during a session using **Shift+Tab** to cycle through permission modes.241You can switch into Plan Mode during a session using **Shift+Tab** to cycle through permission modes.

237 242

238If you are in Normal Mode, **Shift+Tab** first switches into Auto-Accept Mode, indicated by `⏵⏵ accept edits on` at the bottom of the terminal. A subsequent **Shift+Tab** will switch into Plan Mode, indicated by `⏸ plan mode on`.243If you are in Normal Mode, **Shift+Tab** first switches into Auto-Accept Mode, indicated by `⏵⏵ accept edits on` at the bottom of the terminal. A subsequent **Shift+Tab** will switch into Plan Mode, indicated by `⏸ plan mode on`. When an [agent team](/en/agent-teams) is active, the cycle also includes Delegate Mode.

239 244

240**Start a new session in Plan Mode**245**Start a new session in Plan Mode**

241 246

270> How should we handle database migration?275> How should we handle database migration?

271```276```

272 277

278<Tip>Press `Ctrl+G` to open the plan in your default text editor, where you can edit it directly before Claude proceeds.</Tip>

279

273### Configure Plan Mode as default280### Configure Plan Mode as default

274 281

275```json theme={null}282```json theme={null}

323 330

324## Create pull requests331## Create pull requests

325 332

326Suppose you need to create a well-documented pull request for your changes.333You can create pull requests by asking Claude directly ("create a pr for my changes") or by using the `/commit-push-pr` skill, which commits, pushes, and opens a PR in one step.

334

335```

336> /commit-push-pr

337```

338

339If you have a Slack MCP server configured and specify channels in your CLAUDE.md (for example, "post PR URLs to #team-prs"), the skill automatically posts the PR URL to those channels.

340

341For more control over the process, guide Claude through it step-by-step or [create your own skill](/en/skills):

327 342

328<Steps>343<Steps>

329 <Step title="Summarize your changes">344 <Step title="Summarize your changes">

332 ```347 ```

333 </Step>348 </Step>

334 349

335 <Step title="Generate a pull request with Claude">350 <Step title="Generate a pull request">

336 ```351 ```

337 > create a pr352 > create a pr

338 ```353 ```

343 > enhance the PR description with more context about the security improvements358 > enhance the PR description with more context about the security improvements

344 ```359 ```

345 </Step>360 </Step>

~~346~~

347 <Step title="Add testing details">

348 ```

349 > add information about how these changes were tested

350 ```

351 </Step>

352</Steps>361</Steps>

353 362

354<Tip>363When you create a PR using `gh pr create`, the session is automatically linked to that PR. You can resume it later with `claude --from-pr <number>`.

355 Tips:

356 364

357 * Ask Claude directly to make a PR for you365<Tip>

358 * Review Claude's generated PR before submitting366 Review Claude's generated PR before submitting and ask Claude to highlight potential risks or considerations.

359 * Ask Claude to highlight potential risks or considerations

360</Tip>367</Tip>

361 368

362## Handle documentation369## Handle documentation

454 * Include screenshots of errors, UI designs, or diagrams for better context461 * Include screenshots of errors, UI designs, or diagrams for better context

455 * You can work with multiple images in a conversation462 * You can work with multiple images in a conversation

456 * Image analysis works with diagrams, screenshots, mockups, and more463 * Image analysis works with diagrams, screenshots, mockups, and more

464 * When Claude references images (for example, `[Image #1]`), `Cmd+Click` (Mac) or `Ctrl+Click` (Windows/Linux) the link to open the image in your default viewer

457</Tip>465</Tip>

458 466

459***467***

501 509

502## Use extended thinking (thinking mode)510## Use extended thinking (thinking mode)

503 511

504[Extended thinking](https://docs.claude.com/en/docs/build-with-claude/extended-thinking) reserves a portion of the total output token budget for Claude to reason through complex problems step-by-step. This reasoning is visible in verbose mode, which you can toggle on with `Ctrl+O`.512[Extended thinking](https://platform.claude.com/docs/en/build-with-claude/extended-thinking) is enabled by default, giving Claude space to reason through complex problems step-by-step before responding. This reasoning is visible in verbose mode, which you can toggle on with `Ctrl+O`.

513

514Additionally, Opus 4.6 introduces adaptive reasoning: instead of a fixed thinking token budget, the model dynamically allocates thinking based on your [effort level](/en/model-config#adjust-effort-level) setting. Extended thinking and adaptive reasoning work together to give you control over how deeply Claude reasons before responding.

505 515

506Extended thinking is particularly valuable for complex architectural decisions, challenging bugs, multi-step implementation planning, and evaluating tradeoffs between different approaches. It provides more space for exploring multiple solutions, analyzing edge cases, and self-correcting mistakes.516Extended thinking is particularly valuable for complex architectural decisions, challenging bugs, multi-step implementation planning, and evaluating tradeoffs between different approaches.

507 517

508<Note>518<Note>

509 Sonnet 4.5 and Opus 4.5 have thinking enabled by default. All other models have thinking disabled by default. Use `/model` to view or switch your current model.519 Phrases like "think", "think hard", "ultrathink", and "think more" are interpreted as regular prompt instructions and don't allocate thinking tokens.

510</Note>520</Note>

511 521

512You can configure thinking mode for Claude Code in two ways:522### Configure thinking mode

513 523

514| Scope | How to enable | Details |524Thinking is enabled by default, but you can adjust or disable it.

515| --------------------------------- | ------------------------------------------------------------------------------------ | ------------------------------------------------------------------------------------------------------------------------------------------------ |

516| **Global default** | Use `/config` to toggle thinking mode on | Sets your default across all projects.<br />Saved as `alwaysThinkingEnabled` in `~/.claude/settings.json` |

517| **Environment variable override** | Set [`MAX_THINKING_TOKENS`](/en/settings#environment-variables) environment variable | When set, applies a custom token budget to all requests, overriding your thinking mode configuration. Example: `export MAX_THINKING_TOKENS=1024` |

518 525

519### Per-request thinking with `ultrathink`526| Scope | How to configure | Details |

~~520~~ 527| ---------------------- | ------------------------------------------------------------------------------------------ | ----------------------------------------------------------------------------------------------------------------------------------------------------- |

521You can include `ultrathink` as a keyword in your message to enable thinking for a single request:528| **Effort level** | Adjust in `/model` or set [`CLAUDE_CODE_EFFORT_LEVEL`](/en/settings#environment-variables) | Control thinking depth for Opus 4.6: low, medium, high (default). See [Adjust effort level](/en/model-config#adjust-effort-level) |

~~522~~ 529| **Toggle shortcut** | Press `Option+T` (macOS) or `Alt+T` (Windows/Linux) | Toggle thinking on/off for the current session (all models). May require [terminal configuration](/en/terminal-config) to enable Option key shortcuts |

523```530| **Global default** | Use `/config` to toggle thinking mode | Sets your default across all projects (all models).<br />Saved as `alwaysThinkingEnabled` in `~/.claude/settings.json` |

524> ultrathink: design a caching layer for our API531| **Limit token budget** | Set [`MAX_THINKING_TOKENS`](/en/settings#environment-variables) environment variable | Limit the thinking budget to a specific number of tokens (ignored on Opus 4.6 unless set to 0). Example: `export MAX_THINKING_TOKENS=10000` |

525```

~~526~~

527Note that `ultrathink` both allocates the thinking budget AND semantically signals to Claude to reason more thoroughly, which may result in deeper thinking than necessary for your task.

~~528~~

529The `ultrathink` keyword only works when `MAX_THINKING_TOKENS` is not set. When `MAX_THINKING_TOKENS` is configured, it takes priority and controls the thinking budget for all requests.

~~530~~

531Other phrases like "think", "think hard", and "think more" are interpreted as regular prompt instructions and don't allocate thinking tokens.

532 532

533To view Claude's thinking process, press `Ctrl+O` to toggle verbose mode and see the internal reasoning displayed as gray italic text.533To view Claude's thinking process, press `Ctrl+O` to toggle verbose mode and see the internal reasoning displayed as gray italic text.

534 534

535See the [token budget section below](#how-extended-thinking-token-budgets-work) for detailed budget information and cost implications.535### How extended thinking works

~~536~~

537### How extended thinking token budgets work

538 536

539Extended thinking uses a **token budget** that controls how much internal reasoning Claude can perform before responding.537Extended thinking controls how much internal reasoning Claude performs before responding. More thinking provides more space to explore solutions, analyze edge cases, and self-correct mistakes.

540 538

541A larger thinking token budget provides:539**With Opus 4.6**, thinking uses adaptive reasoning: the model dynamically allocates thinking tokens based on the [effort level](/en/model-config#adjust-effort-level) you select (low, medium, high). This is the recommended way to tune the tradeoff between speed and reasoning depth.

542 540

543* More space to explore multiple solution approaches step-by-step541**With other models**, thinking uses a fixed budget of up to 31,999 tokens from your output budget. You can limit this with the [`MAX_THINKING_TOKENS`](/en/settings#environment-variables) environment variable, or disable thinking entirely via `/config` or the `Option+T`/`Alt+T` toggle.

544* Room to analyze edge cases and evaluate tradeoffs thoroughly

545* Ability to revise reasoning and self-correct mistakes

546 542

547Token budgets for thinking mode:543`MAX_THINKING_TOKENS` is ignored when using Opus 4.6, since adaptive reasoning controls thinking depth instead. The one exception: setting `MAX_THINKING_TOKENS=0` still disables thinking entirely on any model.

~~548~~

549* When thinking is **enabled** (via `/config` or `ultrathink`), Claude can use up to **31,999 tokens** from your output budget for internal reasoning

550* When thinking is **disabled**, Claude uses **0 tokens** for thinking

~~551~~

552**Custom token budgets:**

~~553~~

554* You can set a custom thinking token budget using the [`MAX_THINKING_TOKENS` environment variable](/en/settings#environment-variables)

555* This takes highest priority and overrides the default 31,999 token budget

556* See the [extended thinking documentation](https://docs.claude.com/en/docs/build-with-claude/extended-thinking) for valid token ranges

557 544

558<Warning>545<Warning>

559 You're charged for all thinking tokens used, even though Claude 4 models show summarized thinking546 You're charged for all thinking tokens used, even though Claude 4 models show summarized thinking

563 550

564## Resume previous conversations551## Resume previous conversations

565 552

566Suppose you've been working on a task with Claude Code and need to continue where you left off in a later session.553When starting Claude Code, you can resume a previous session:

554

555* `claude --continue` continues the most recent conversation in the current directory

556* `claude --resume` opens a conversation picker or resumes by name

557* `claude --from-pr 123` resumes sessions linked to a specific pull request

567 558

568Claude Code provides two options for resuming previous conversations:559From inside an active session, use `/resume` to switch to a different conversation.

569 560

570* `--continue` to automatically continue the most recent conversation561Sessions are stored per project directory. The `/resume` picker shows sessions from the same git repository, including worktrees.

571* `--resume` to display a conversation picker562

563### Name your sessions

564

565Give sessions descriptive names to find them later. This is a best practice when working on multiple tasks or features.

572 566

573<Steps>567<Steps>

574 <Step title="Continue the most recent conversation">568 <Step title="Name the current session">

575 ```bash theme={null}569 Use `/rename` during a session to give it a memorable name:

576 claude --continue570

571 ```

572 > /rename auth-refactor

577 ```573 ```

578 574

579 This immediately resumes your most recent conversation without any prompts.575 You can also rename any session from the picker: run `/resume`, navigate to a session, and press `R`.

580 </Step>576 </Step>

581 577

582 <Step title="Continue in non-interactive mode">578 <Step title="Resume by name later">

579 From the command line:

580

583 ```bash theme={null}581 ```bash theme={null}

584 claude --continue --print "Continue with my task"582 claude --resume auth-refactor

585 ```583 ```

586 584

587 Use `--print` with `--continue` to resume the most recent conversation in non-interactive mode, perfect for scripts or automation.585 Or from inside an active session:

588 </Step>

589 586

590 <Step title="Show conversation picker">

591 ```bash theme={null}

592 claude --resume

593 ```587 ```

588 > /resume auth-refactor

589 ```

590 </Step>

591</Steps>

594 592

595 This displays an interactive conversation selector with a clean list view showing:593### Use the session picker

596 594

597 * Session summary (or initial prompt)595The `/resume` command (or `claude --resume` without arguments) opens an interactive session picker with these features:

598 * Metadata: time elapsed, message count, and git branch

599 596

600 Use arrow keys to navigate and press Enter to select a conversation. Press Esc to exit.597**Keyboard shortcuts in the picker:**

601 </Step>598

602</Steps>599| Shortcut | Action |

600| :-------- | :------------------------------------------------ |

601| `↑` / `↓` | Navigate between sessions |

602| `→` / `←` | Expand or collapse grouped sessions |

603| `Enter` | Select and resume the highlighted session |

604| `P` | Preview the session content |

605| `R` | Rename the highlighted session |

606| `/` | Search to filter sessions |

607| `A` | Toggle between current directory and all projects |

608| `B` | Filter to sessions from your current git branch |

609| `Esc` | Exit the picker or search mode |

610

611**Session organization:**

612

613The picker displays sessions with helpful metadata:

614

615* Session name or initial prompt

616* Time elapsed since last activity

617* Message count

618* Git branch (if applicable)

619

620Forked sessions (created with `/rewind` or `--fork-session`) are grouped together under their root session, making it easier to find related conversations.

603 621

604<Tip>622<Tip>

605 Tips:623 Tips:

606 624

607 * Conversation history is stored locally on your machine625 * **Name sessions early**: Use `/rename` when starting work on a distinct task—it's much easier to find "payment-integration" than "explain this function" later

608 * Use `--continue` for quick access to your most recent conversation626 * Use `--continue` for quick access to your most recent conversation in the current directory

609 * Use `--resume` when you need to select a specific past conversation627 * Use `--resume session-name` when you know which session you need

610 * When resuming, you'll see the entire conversation history before continuing628 * Use `--resume` (without a name) when you need to browse and select

629 * For scripts, use `claude --continue --print "prompt"` to resume in non-interactive mode

630 * Press `P` in the picker to preview a session before resuming it

611 * The resumed conversation starts with the same model and configuration as the original631 * The resumed conversation starts with the same model and configuration as the original

612 632

613 How it works:633 How it works:

616 2. **Message Deserialization**: When resuming, the entire message history is restored to maintain context636 2. **Message Deserialization**: When resuming, the entire message history is restored to maintain context

617 3. **Tool State**: Tool usage and results from the previous conversation are preserved637 3. **Tool State**: Tool usage and results from the previous conversation are preserved

618 4. **Context Restoration**: The conversation resumes with all previous context intact638 4. **Context Restoration**: The conversation resumes with all previous context intact

~~619~~

620 Examples:

~~621~~

622 ```bash theme={null}

623 # Continue most recent conversation

624 claude --continue

~~625~~

626 # Continue most recent conversation with a specific prompt

627 claude --continue --print "Show me our progress"

~~628~~

629 # Show conversation picker

630 claude --resume

~~631~~

632 # Continue most recent conversation in non-interactive mode

633 claude --continue --print "Run the tests again"

634 ```

635</Tip>639</Tip>

636 640

637***641***

703 * Other languages: Following your project's standard setup process707 * Other languages: Following your project's standard setup process

704</Tip>708</Tip>

705 709

710For automated coordination of parallel sessions with shared tasks and messaging, see [agent teams](/en/agent-teams).

711

706***712***

707 713

708## Use Claude as a unix-style utility714## Use Claude as a unix-style utility

790 796

791***797***

792 798

793## Create custom slash commands

~~794~~

795Claude Code supports custom slash commands that you can create to quickly execute specific prompts or tasks.

~~796~~

797For more details, see the [Slash commands](/en/slash-commands) reference page.

~~798~~

799### Create project-specific commands

~~800~~

801Suppose you want to create reusable slash commands for your project that all team members can use.

~~802~~

803<Steps>

804 <Step title="Create a commands directory in your project">

805 ```bash theme={null}

806 mkdir -p .claude/commands

807 ```

808 </Step>

~~809~~

810 <Step title="Create a Markdown file for each command">

811 ```bash theme={null}

812 echo "Analyze the performance of this code and suggest three specific optimizations:" > .claude/commands/optimize.md

813 ```

814 </Step>

~~815~~

816 <Step title="Use your custom command in Claude Code">

817 ```

818 > /optimize

819 ```

820 </Step>

821</Steps>

~~822~~

823<Tip>

824 Tips:

~~825~~

826 * Command names are derived from the filename (for example, `optimize.md` becomes `/optimize`)

827 * You can organize commands in subdirectories (for example, `.claude/commands/frontend/component.md` creates `/component` with "(project:frontend)" shown in the description)

828 * Project commands are available to everyone who clones the repository

829 * The Markdown file content becomes the prompt sent to Claude when the command is invoked

830</Tip>

~~831~~

832### Add command arguments with \$ARGUMENTS

~~833~~

834Suppose you want to create flexible slash commands that can accept additional input from users.

~~835~~

836<Steps>

837 <Step title="Create a command file with the $ARGUMENTS placeholder">

838 ```bash theme={null}

839 echo 'Find and fix issue #$ARGUMENTS. Follow these steps: 1.

840 Understand the issue described in the ticket 2. Locate the relevant code in

841 our codebase 3. Implement a solution that addresses the root cause 4. Add

842 appropriate tests 5. Prepare a concise PR description' >

843 .claude/commands/fix-issue.md

844 ```

845 </Step>

~~846~~

847 <Step title="Use the command with an issue number">

848 In your Claude session, use the command with arguments.

~~849~~

850 ```

851 > /fix-issue 123

852 ```

~~853~~

854 This replaces \$ARGUMENTS with "123" in the prompt.

855 </Step>

856</Steps>

~~857~~

858<Tip>

859 Tips:

~~860~~

861 * The \$ARGUMENTS placeholder is replaced with any text that follows the command

862 * You can position \$ARGUMENTS anywhere in your command template

863 * Other useful applications: generating test cases for specific functions, creating documentation for components, reviewing code in particular files, or translating content to specified languages

864</Tip>

~~865~~

866### Create personal slash commands

~~867~~

868Suppose you want to create personal slash commands that work across all your projects.

~~869~~

870<Steps>

871 <Step title="Create a commands directory in your home folder">

872 ```bash theme={null}

873 mkdir -p ~/.claude/commands

874 ```

875 </Step>

~~876~~

877 <Step title="Create a Markdown file for each command">

878 ```bash theme={null}

879 echo "Review this code for security vulnerabilities, focusing on:" >

880 ~/.claude/commands/security-review.md

881 ```

882 </Step>

~~883~~

884 <Step title="Use your personal custom command">

885 ```

886 > /security-review

887 ```

888 </Step>

889</Steps>

~~890~~

891<Tip>

892 Tips:

~~893~~

894 * Personal commands show "(user)" in their description when listed with `/help`

895 * Personal commands are only available to you and not shared with your team

896 * Personal commands work across all your projects

897 * You can use these for consistent workflows across different codebases

898</Tip>

~~899~~

900***

~~901~~

902## Ask Claude about its capabilities799## Ask Claude about its capabilities

903 800

904Claude has built-in access to its documentation and can answer questions about its own features and limitations.801Claude has built-in access to its documentation and can answer questions about its own features and limitations.

914```811```

915 812

916```813```

917> what slash commands are available?814> what skills are available?

918```815```

919 816

920```817```

945 842

946## Next steps843## Next steps

947 844

948<Card title="Claude Code reference implementation" icon="code" href="https://github.com/anthropics/claude-code/tree/main/.devcontainer">845<CardGroup cols={2}>

949 Clone our development container reference implementation.846 <Card title="Best practices" icon="lightbulb" href="/en/best-practices">

950</Card>847 Patterns for getting the most out of Claude Code

848 </Card>

951 849

850 <Card title="How Claude Code works" icon="gear" href="/en/how-claude-code-works">

851 Understand the agentic loop and context management

852 </Card>

952 853

854 <Card title="Extend Claude Code" icon="puzzle-piece" href="/en/features-overview">

855 Add skills, hooks, MCP, subagents, and plugins

856 </Card>

953 857

954> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt858 <Card title="Reference implementation" icon="code" href="https://github.com/anthropics/claude-code/tree/main/.devcontainer">

859 Clone our development container reference implementation

860 </Card>

861</CardGroup>

costs.md +125 −58

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Manage costs effectively5# Manage costs effectively

2 6

~~3> Learn how to track and optimize token usage and costs when using Claude Code.~~7> Track token usage, set team spend limits, and reduce Claude Code costs with context management, model selection, extended thinking settings, and preprocessing hooks.

4 8

~~5Claude Code consumes tokens for each interaction. The average cost is \$6 per developer per day, with daily costs remaining below \$12 for 90% of users.~~9Claude Code consumes tokens for each interaction. Costs vary based on codebase size, query complexity, and conversation length. The average cost is \$6 per developer per day, with daily costs remaining below \$12 for 90% of users.

6 10

7For team usage, Claude Code charges by API token consumption. On average, Claude Code costs \~\$100-200/developer per month with Sonnet 4.5 though there is large variance depending on how many instances users are running and whether they're using it in automation.11For team usage, Claude Code charges by API token consumption. On average, Claude Code costs \~\$100-200/developer per month with Sonnet 4.5 though there is large variance depending on how many instances users are running and whether they're using it in automation.

8 12

13This page covers how to [track your costs](#track-your-costs), [manage costs for teams](#managing-costs-for-teams), and [reduce token usage](#reduce-token-usage).

9## Track your costs15## Track your costs

10 16

11### Using the `/cost` command17### Using the `/cost` command

12 18

13<Note>19<Note>

~~14 The `/cost` command is not intended for Claude Max and Pro subscribers.~~20 The `/cost` command shows API token usage and is intended for API users. Claude Max and Pro subscribers have usage included in their subscription, so `/cost` data isn't relevant for billing purposes. Subscribers can use `/stats` to view usage patterns.

15</Note>21</Note>

16 22

17The `/cost` command provides detailed token usage statistics for your current session:23The `/cost` command provides detailed token usage statistics for your current session:

23Total code changes: 0 lines added, 0 lines removed29Total code changes: 0 lines added, 0 lines removed

24```30```

25 31

~~26### Additional tracking options~~32## Managing costs for teams

27 33

28Check [historical usage](https://support.claude.com/en/articles/9534590-cost-and-usage-reporting-in-console) in the Claude Console (requires Admin or Billing role) and set [workspace spend limits](https://support.claude.com/en/articles/9796807-creating-and-managing-workspaces) for the Claude Code workspace (requires Admin role).34When using Claude API, you can [set workspace spend limits](https://platform.claude.com/docs/en/build-with-claude/workspaces#workspace-limits) on the total Claude Code workspace spend. Admins can [view cost and usage reporting](https://platform.claude.com/docs/en/build-with-claude/workspaces#usage-and-cost-tracking) in the Console.

29 35

30<Note>36<Note>

31 When you first authenticate Claude Code with your Claude Console account, a workspace called "Claude Code" is automatically created for you. This workspace provides centralized cost tracking and management for all Claude Code usage in your organization. You cannot create API keys for this workspace - it is exclusively for Claude Code authentication and usage.37 When you first authenticate Claude Code with your Claude Console account, a workspace called "Claude Code" is automatically created for you. This workspace provides centralized cost tracking and management for all Claude Code usage in your organization. You cannot create API keys for this workspace; it is exclusively for Claude Code authentication and usage.

32</Note>38</Note>

33 39

~~34## Managing costs for teams~~40On Bedrock, Vertex, and Foundry, Claude Code does not send metrics from your cloud. To get cost metrics, several large enterprises reported using [LiteLLM](/en/llm-gateway#litellm-configuration), which is an open-source tool that helps companies [track spend by key](https://docs.litellm.ai/docs/proxy/virtual_keys#tracking-spend). This project is unaffiliated with Anthropic and has not been audited for security.

36When using Claude API, you can limit the total Claude Code workspace spend. To configure, [follow these instructions](https://support.claude.com/en/articles/9796807-creating-and-managing-workspaces). Admins can view cost and usage reporting by [following these instructions](https://support.claude.com/en/articles/9534590-cost-and-usage-reporting-in-console).

38On Bedrock and Vertex, Claude Code does not send metrics from your cloud. In order to get cost metrics, several large enterprises reported using [LiteLLM](/en/third-party-integrations#litellm), which is an open-source tool that helps companies [track spend by key](https://docs.litellm.ai/docs/proxy/virtual_keys#tracking-spend). This project is unaffiliated with Anthropic and we have not audited its security.

39 41

40### Rate limit recommendations42### Rate limit recommendations

41 43

52 54

53For example, if you have 200 users, you might request 20k TPM for each user, or 4 million total TPM (200\*20,000 = 4 million).55For example, if you have 200 users, you might request 20k TPM for each user, or 4 million total TPM (200\*20,000 = 4 million).

54 56

55The TPM per user decreases as team size grows because we expect fewer users to use Claude Code concurrently in larger organizations. These rate limits apply at the organization level, not per individual user, which means individual users can temporarily consume more than their calculated share when others aren't actively using the service.57The TPM per user decreases as team size grows because fewer users tend to use Claude Code concurrently in larger organizations. These rate limits apply at the organization level, not per individual user, which means individual users can temporarily consume more than their calculated share when others aren't actively using the service.

56 58

57<Note>59<Note>

58 If you anticipate scenarios with unusually high concurrent usage (such as live training sessions with large groups), you may need higher TPM allocations per user.60 If you anticipate scenarios with unusually high concurrent usage (such as live training sessions with large groups), you may need higher TPM allocations per user.

59</Note>61</Note>

60 62

63### Agent team token costs

65[Agent teams](/en/agent-teams) spawn multiple Claude Code instances, each with its own context window. Token usage scales with the number of active teammates and how long each one runs.

67To keep agent team costs manageable:

69* Use Sonnet for teammates. It balances capability and cost for coordination tasks.

70* Keep teams small. Each teammate runs its own context window, so token usage is roughly proportional to team size.

71* Keep spawn prompts focused. Teammates load CLAUDE.md, MCP servers, and skills automatically, but everything in the spawn prompt adds to their context from the start.

72* Clean up teams when work is done. Active teammates continue consuming tokens even if idle.

73* Agent teams are disabled by default. Set `CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS=1` in your [settings.json](/en/settings) or environment to enable them. See [enable agent teams](/en/agent-teams#enable-agent-teams).

61## Reduce token usage75## Reduce token usage

62 76

~~63* **Compact conversations:**~~77Token costs scale with context size: the more context Claude processes, the more tokens you use. Claude Code automatically optimizes costs through prompt caching (which reduces costs for repeated content like system prompts) and auto-compaction (which summarizes conversation history when approaching context limits).

64 78

~~65 * Claude uses auto-compact by default when context exceeds 95% capacity~~79The following strategies help you keep context small and reduce per-message costs.

~~66 * Toggle auto-compact: Run `/config` and navigate to "Auto-compact enabled"~~

~~67 * Use `/compact` manually when context gets large~~

~~68 * Add custom instructions: `/compact Focus on code samples and API usage`~~

~~69 * Customize compaction by adding to CLAUDE.md:~~

70 80

~~71 ```markdown theme={null}~~81### Manage context proactively

~~72 # Summary instructions~~

73 82

~~74 When you are using compact, please focus on test output and code changes~~83Use `/cost` to check your current token usage, or [configure your status line](/en/statusline#context-window-usage) to display it continuously.

~~75 ```~~

76 84

~~77* **Write specific queries:** Avoid vague requests that trigger unnecessary scanning~~85* **Clear between tasks**: Use `/clear` to start fresh when switching to unrelated work. Stale context wastes tokens on every subsequent message. Use `/rename` before clearing so you can easily find the session later, then `/resume` to return to it.

86* **Add custom compaction instructions**: `/compact Focus on code samples and API usage` tells Claude what to preserve during summarization.

78 87

~~79* **Break down complex tasks:** Split large tasks into focused interactions~~88You can also customize compaction behavior in your CLAUDE.md:

80 89

~~81* **Clear history between tasks:** Use `/clear` to reset context~~90```markdown theme={null}

91# Compact instructions

82 92

~~83Costs can vary significantly based on:~~93When you are using compact, please focus on test output and code changes

94```

84 95

~~85* Size of codebase being analyzed~~96### Choose the right model

~~86* Complexity of queries~~

~~87* Number of files being searched or modified~~

~~88* Length of conversation history~~

~~89* Frequency of compacting conversations~~

90 97

~~91## Background token usage~~98Sonnet handles most coding tasks well and costs less than Opus. Reserve Opus for complex architectural decisions or multi-step reasoning. Use `/model` to switch models mid-session, or set a default in `/config`. For simple subagent tasks, specify `model: haiku` in your [subagent configuration](/en/sub-agents#choose-a-model).

92 99

~~93Claude Code uses tokens for some background functionality even when idle:~~100### Reduce MCP server overhead

94 101

~~95* **Conversation summarization**: Background jobs that summarize previous conversations for the `claude --resume` feature~~102Each MCP server adds tool definitions to your context, even when idle. Run `/context` to see what's consuming space.

~~96* **Command processing**: Some commands like `/cost` may generate requests to check status~~

97 103

~~98These background processes consume a small amount of tokens (typically under \$0.04 per session) even without active interaction.~~104* **Prefer CLI tools when available**: Tools like `gh`, `aws`, `gcloud`, and `sentry-cli` are more context-efficient than MCP servers because they don't add persistent tool definitions. Claude can run CLI commands directly without the overhead.

105* **Disable unused servers**: Run `/mcp` to see configured servers and disable any you're not actively using.

106* **Tool search is automatic**: When MCP tool descriptions exceed 10% of your context window, Claude Code automatically defers them and loads tools on-demand via [tool search](/en/mcp#scale-with-mcp-tool-search). Since deferred tools only enter context when actually used, a lower threshold means fewer idle tool definitions consuming space. Set a lower threshold with `ENABLE_TOOL_SEARCH=auto:<N>` (for example, `auto:5` triggers when tools exceed 5% of your context window).

99 107

100## Tracking version changes and updates108### Install code intelligence plugins for typed languages

101 109

102### Current version information110[Code intelligence plugins](/en/discover-plugins#code-intelligence) give Claude precise symbol navigation instead of text-based search, reducing unnecessary file reads when exploring unfamiliar code. A single "go to definition" call replaces what might otherwise be a grep followed by reading multiple candidate files. Installed language servers also report type errors automatically after edits, so Claude catches mistakes without running a compiler.

103 111

104To check your current Claude Code version and installation details:112### Offload processing to hooks and skills

105 113

106```bash theme={null}114Custom [hooks](/en/hooks) can preprocess data before Claude sees it. Instead of Claude reading a 10,000-line log file to find errors, a hook can grep for `ERROR` and return only matching lines, reducing context from tens of thousands of tokens to hundreds.

107claude doctor

108```

109 115

110This command shows your version, installation type, and system information.116A [skill](/en/skills) can give Claude domain knowledge so it doesn't have to explore. For example, a "codebase-overview" skill could describe your project's architecture, key directories, and naming conventions. When Claude invokes the skill, it gets this context immediately instead of spending tokens reading multiple files to understand the structure.

111 117

112### Understanding changes in Claude Code behavior118For example, this PreToolUse hook filters test output to show only failures:

113 119

114Claude Code regularly receives updates that may change how features work, including cost reporting:120<Tabs>

121 <Tab title="settings.json">

122 Add this to your [settings.json](/en/settings#settings-files) to run the hook before every Bash command:

115 123

116* **Version tracking**: Use `claude doctor` to see your current version124 ```json theme={null}

117* **Behavior changes**: Features like `/cost` may display information differently across versions125 {

118* **Documentation access**: Claude always has access to the latest documentation, which can help explain current feature behavior126 "hooks": {

127 "PreToolUse": [

128 {

129 "matcher": "Bash",

130 "hooks": [

131 {

132 "type": "command",

133 "command": "~/.claude/hooks/filter-test-output.sh"

134 }

135 ]

136 }

137 ]

138 }

139 }

140 ```

141 </Tab>

142

143 <Tab title="filter-test-output.sh">

144 The hook calls this script, which checks if the command is a test runner and modifies it to show only failures:

145

146 ```bash theme={null}

147 #!/bin/bash

148 input=$(cat)

149 cmd=$(echo "$input" | jq -r '.tool_input.command')

150

151 # If running tests, filter to show only failures

152 if [[ "$cmd" =~ ^(npm test|pytest|go test) ]]; then

153 filtered_cmd="$cmd 2>&1 | grep -A 5 -E '(FAIL|ERROR|error:)' | head -100"

154 echo "{\"hookSpecificOutput\":{\"hookEventName\":\"PreToolUse\",\"permissionDecision\":\"allow\",\"updatedInput\":{\"command\":\"$filtered_cmd\"}}}"

155 else

156 echo "{}"

157 fi

158 ```

159 </Tab>

160</Tabs>

119 161

120### When cost reporting changes162### Move instructions from CLAUDE.md to skills

121 163

122If you notice changes in how costs are displayed (such as the `/cost` command showing different information):164Your [CLAUDE.md](/en/memory) file is loaded into context at session start. If it contains detailed instructions for specific workflows (like PR reviews or database migrations), those tokens are present even when you're doing unrelated work. [Skills](/en/skills) load on-demand only when invoked, so moving specialized instructions into skills keeps your base context smaller. Aim to keep CLAUDE.md under \~500 lines by including only essentials.

123 165

1241. **Verify your version**: Run `claude doctor` to confirm your current version166### Adjust extended thinking

1252. **Consult documentation**: Ask Claude directly about current feature behavior, as it has access to up-to-date documentation

1263. **Contact support**: For specific billing questions, contact Anthropic support through your Console account

127 167

128<Note>168Extended thinking is enabled by default with a budget of 31,999 tokens because it significantly improves performance on complex planning and reasoning tasks. However, thinking tokens are billed as output tokens, so for simpler tasks where deep reasoning isn't needed, you can reduce costs by lowering the [effort level](/en/model-config#adjust-effort-level) in `/model` for Opus 4.6, disabling thinking in `/config`, or lowering the budget (for example, `MAX_THINKING_TOKENS=8000`).

129 For team deployments, we recommend starting with a small pilot group to169

130 establish usage patterns before wider rollout.170### Delegate verbose operations to subagents

131</Note>171

172Running tests, fetching documentation, or processing log files can consume significant context. Delegate these to [subagents](/en/sub-agents#isolate-high-volume-operations) so the verbose output stays in the subagent's context while only a summary returns to your main conversation.

173

174### Manage agent team costs

175

176Agent teams use approximately 7x more tokens than standard sessions when teammates run in plan mode, because each teammate maintains its own context window and runs as a separate Claude instance. Keep team tasks small and self-contained to limit per-teammate token usage. See [agent teams](/en/agent-teams) for details.

177

178### Write specific prompts

179

180Vague requests like "improve this codebase" trigger broad scanning. Specific requests like "add input validation to the login function in auth.ts" let Claude work efficiently with minimal file reads.

181

182### Work efficiently on complex tasks

183

184For longer or more complex work, these habits help avoid wasted tokens from going down the wrong path:

132 185

186* **Use plan mode for complex tasks**: Press Shift+Tab to enter [plan mode](/en/common-workflows#use-plan-mode-for-safe-code-analysis) before implementation. Claude explores the codebase and proposes an approach for your approval, preventing expensive re-work when the initial direction is wrong.

187* **Course-correct early**: If Claude starts heading the wrong direction, press Escape to stop immediately. Use `/rewind` or double-tap Escape to restore conversation and code to a previous checkpoint.

188* **Give verification targets**: Include test cases, paste screenshots, or define expected output in your prompt. When Claude can verify its own work, it catches issues before you need to request fixes.

189* **Test incrementally**: Write one file, test it, then continue. This catches issues early when they're cheap to fix.

190

191## Background token usage

192

193Claude Code uses tokens for some background functionality even when idle:

194

195* **Conversation summarization**: Background jobs that summarize previous conversations for the `claude --resume` feature

196* **Command processing**: Some commands like `/cost` may generate requests to check status

197

198These background processes consume a small amount of tokens (typically under \$0.04 per session) even without active interaction.

133 199

200## Understanding changes in Claude Code behavior

134 201

135> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt202Claude Code regularly receives updates that may change how features work, including cost reporting. Run `claude --version` to check your current version. For specific billing questions, contact Anthropic support through your [Console account](https://platform.claude.com/login). For team deployments, start with a small pilot group to establish usage patterns before wider rollout.

data-usage.md +27 −31

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Data usage5# Data usage

2 6

3> Learn about Anthropic's data usage policies for Claude7> Learn about Anthropic's data usage policies for Claude

7### Data training policy11### Data training policy

8 12

9**Consumer users (Free, Pro, and Max plans)**:13**Consumer users (Free, Pro, and Max plans)**:

~~10Starting August 28, 2025, we're giving you the choice to allow your data to be used to improve future Claude models.~~14We give you the choice to allow your data to be used to improve future Claude models. We will train new models using data from Free, Pro, and Max accounts when this setting is on (including when you use Claude Code from these accounts).

~~12We will train new models using data from Free, Pro, and Max accounts when this setting is on (including when you use Claude Code from these accounts).~~

~~14* If you're a current user, you can select your preference now and your selection will immediately go into effect.~~

~~15 This setting will only apply to new or resumed chats and coding sessions on Claude. Previous chats with no additional activity will not be used for model training.~~

~~16* You have until October 8, 2025 to make your selection.~~

~~17 If you're a new user, you can pick your setting for model training during the signup process.~~

~~18 You can change your selection at any time in your Privacy Settings.~~

19 15

20**Commercial users**: (Team and Enterprise plans, API, 3rd-party platforms, and Claude Gov) maintain existing policies: Anthropic does not train generative models using code or prompts sent to Claude Code under commercial terms, unless the customer has chosen to provide their data to us for model improvement (for example, the [Developer Partner Program](https://support.claude.com/en/articles/11174108-about-the-development-partner-program)).16**Commercial users**: (Team and Enterprise plans, API, 3rd-party platforms, and Claude Gov) maintain existing policies: Anthropic does not train generative models using code or prompts sent to Claude Code under commercial terms, unless the customer has chosen to provide their data to us for model improvement (for example, the [Developer Partner Program](https://support.claude.com/en/articles/11174108-about-the-development-partner-program)).

21 17

31 27

32When you see the "How is Claude doing this session?" prompt in Claude Code, responding to this survey (including selecting "Dismiss"), only your numeric rating (1, 2, 3, or dismiss) is recorded. We do not collect or store any conversation transcripts, inputs, outputs, or other session data as part of this survey. Unlike thumbs up/down feedback or `/bug` reports, this session quality survey is a simple product satisfaction metric. Your responses to this survey do not impact your data training preferences and cannot be used to train our AI models.28When you see the "How is Claude doing this session?" prompt in Claude Code, responding to this survey (including selecting "Dismiss"), only your numeric rating (1, 2, 3, or dismiss) is recorded. We do not collect or store any conversation transcripts, inputs, outputs, or other session data as part of this survey. Unlike thumbs up/down feedback or `/bug` reports, this session quality survey is a simple product satisfaction metric. Your responses to this survey do not impact your data training preferences and cannot be used to train our AI models.

33 29

30To disable these surveys, set `CLAUDE_CODE_DISABLE_FEEDBACK_SURVEY=1`. The survey is also automatically disabled when using third-party providers (Bedrock, Vertex, Foundry) or when telemetry is disabled.

34### Data retention32### Data retention

35 33

36Anthropic retains Claude Code data based on your account type and preferences.34Anthropic retains Claude Code data based on your account type and preferences.

51 49

52For full details, please review our [Commercial Terms of Service](https://www.anthropic.com/legal/commercial-terms) (for Team, Enterprise, and API users) or [Consumer Terms](https://www.anthropic.com/legal/consumer-terms) (for Free, Pro, and Max users) and [Privacy Policy](https://www.anthropic.com/legal/privacy).50For full details, please review our [Commercial Terms of Service](https://www.anthropic.com/legal/commercial-terms) (for Team, Enterprise, and API users) or [Consumer Terms](https://www.anthropic.com/legal/consumer-terms) (for Free, Pro, and Max users) and [Privacy Policy](https://www.anthropic.com/legal/privacy).

53 51

~~54## Data flow and dependencies~~52## Data access

54For all first party users, you can learn more about what data is logged for [local Claude Code](#local-claude-code-data-flow-and-dependencies) and [remote Claude Code](#cloud-execution-data-flow-and-dependencies). Note for remote Claude Code, Claude accesses the repository where you initiate your Claude Code session. Claude does not access repositories that you have connected but have not started a session in.

56## Local Claude Code: Data flow and dependencies

55 57

56<img src="https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/claude-code-data-flow.png?fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=4672f138596e864633b4b7c7ae4ae812" alt="Claude Code data flow diagram" data-og-width="1597" width="1597" data-og-height="1285" height="1285" data-path="images/claude-code-data-flow.png" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/claude-code-data-flow.png?w=280&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=5d9bdaf7ea50fc38dc01bbde7b952835 280w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/claude-code-data-flow.png?w=560&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=525736e5860ac9f262de4b40c9c68a0e 560w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/claude-code-data-flow.png?w=840&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=5262f9d1a1d0cffb0d5944e49b2d72be 840w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/claude-code-data-flow.png?w=1100&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=ec74e6b2f87b667f6d0e2278c20944de 1100w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/claude-code-data-flow.png?w=1650&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=05f11b1d061b6ddbb69969d4e535547a 1650w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/claude-code-data-flow.png?w=2500&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=9b9cce0fb5989bd1d27f143825be73ff 2500w" />58The diagram below shows how Claude Code connects to external services during installation and normal operation. Solid lines indicate required connections, while dashed lines represent optional or user-initiated data flows.

60<img src="https://mintcdn.com/claude-code/I9Dpo7RZuIbc86cX/images/claude-code-data-flow.svg?fit=max&auto=format&n=I9Dpo7RZuIbc86cX&q=85&s=9e77f476347e7c9983f6e211d27cf6a9" alt="Diagram showing Claude Code's external connections: install/update connects to NPM, and user requests connect to Anthropic services including Console auth, public-api, and optionally Statsig, Sentry, and bug reporting" data-og-width="720" width="720" data-og-height="520" height="520" data-path="images/claude-code-data-flow.svg" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/I9Dpo7RZuIbc86cX/images/claude-code-data-flow.svg?w=280&fit=max&auto=format&n=I9Dpo7RZuIbc86cX&q=85&s=94c033b9b6db3d10b9e2d7c6d681d9dc 280w, https://mintcdn.com/claude-code/I9Dpo7RZuIbc86cX/images/claude-code-data-flow.svg?w=560&fit=max&auto=format&n=I9Dpo7RZuIbc86cX&q=85&s=430aaaf77c28c501d5753ffa456ee227 560w, https://mintcdn.com/claude-code/I9Dpo7RZuIbc86cX/images/claude-code-data-flow.svg?w=840&fit=max&auto=format&n=I9Dpo7RZuIbc86cX&q=85&s=63c3c3f160b522220a8291fe2f93f970 840w, https://mintcdn.com/claude-code/I9Dpo7RZuIbc86cX/images/claude-code-data-flow.svg?w=1100&fit=max&auto=format&n=I9Dpo7RZuIbc86cX&q=85&s=a7f6e838482f4a1a0a0b4683439369ea 1100w, https://mintcdn.com/claude-code/I9Dpo7RZuIbc86cX/images/claude-code-data-flow.svg?w=1650&fit=max&auto=format&n=I9Dpo7RZuIbc86cX&q=85&s=5fbf749c2f94babb3ef72edfb7aba1e9 1650w, https://mintcdn.com/claude-code/I9Dpo7RZuIbc86cX/images/claude-code-data-flow.svg?w=2500&fit=max&auto=format&n=I9Dpo7RZuIbc86cX&q=85&s=7a1babbdccc4986957698d9c5c30c4a8 2500w" />

57 61

58Claude Code is installed from [NPM](https://www.npmjs.com/package/@anthropic-ai/claude-code). Claude Code runs locally. In order to interact with the LLM, Claude Code sends data over the network. This data includes all user prompts and model outputs. The data is encrypted in transit via TLS and is not encrypted at rest. Claude Code is compatible with most popular VPNs and LLM proxies.62Claude Code is installed from [NPM](https://www.npmjs.com/package/@anthropic-ai/claude-code). Claude Code runs locally. In order to interact with the LLM, Claude Code sends data over the network. This data includes all user prompts and model outputs. The data is encrypted in transit via TLS and is not encrypted at rest. Claude Code is compatible with most popular VPNs and LLM proxies.

59 63

60Claude Code is built on Anthropic's APIs. For details regarding our API's security controls, including our API logging procedures, please refer to compliance artifacts offered in the [Anthropic Trust Center](https://trust.anthropic.com).64Claude Code is built on Anthropic's APIs. For details regarding our API's security controls, including our API logging procedures, please refer to compliance artifacts offered in the [Anthropic Trust Center](https://trust.anthropic.com).

61 65

~~62### Cloud execution~~66### Cloud execution: Data flow and dependencies

~~64<Note>~~

~~65 The above data flow diagram and description applies to Claude Code CLI running locally on your machine. For cloud-based sessions using Claude Code on the web, see the section below.~~

~~66</Note>~~

67 67

68When using [Claude Code on the web](/en/claude-code-on-the-web), sessions run in Anthropic-managed virtual machines instead of locally. In cloud environments:68When using [Claude Code on the web](/en/claude-code-on-the-web), sessions run in Anthropic-managed virtual machines instead of locally. In cloud environments:

69 69

~~70* **Code storage**: Your repository is cloned to an isolated VM and automatically deleted after session completion~~70* **Code and data storage:** Your repository is cloned to an isolated VM. Code and session data are subject to the retention and usage policies for your account type (see Data retention section above)

~~71* **Credentials**: GitHub authentication is handled through a secure proxy; your GitHub credentials never enter the sandbox~~71* **Credentials:** GitHub authentication is handled through a secure proxy; your GitHub credentials never enter the sandbox

~~72* **Network traffic**: All outbound traffic goes through a security proxy for audit logging and abuse prevention~~72* **Network traffic:** All outbound traffic goes through a security proxy for audit logging and abuse prevention

~~73* **Data retention**: Code and session data are subject to the retention and usage policies for your account type~~73* **Session data:** Prompts, code changes, and outputs follow the same data policies as local Claude Code usage

~~74* **Session data**: Prompts, code changes, and outputs follow the same data policies as local Claude Code usage~~

75 74

76For security details about cloud execution, see [Security](/en/security#cloud-execution-security).75For security details about cloud execution, see [Security](/en/security#cloud-execution-security).

77 76

85 84

86## Default behaviors by API provider85## Default behaviors by API provider

87 86

88By default, we disable all non-essential traffic (including error reporting, telemetry, and bug reporting functionality) when using Bedrock or Vertex. You can also opt out of all of these at once by setting the `CLAUDE_CODE_DISABLE_NONESSENTIAL_TRAFFIC` environment variable. Here are the full default behaviors:87By default, we disable all non-essential traffic (including error reporting, telemetry, bug reporting functionality, and session quality surveys) when using Bedrock, Vertex, or Foundry. You can also opt out of all of these at once by setting the `CLAUDE_CODE_DISABLE_NONESSENTIAL_TRAFFIC` environment variable. Here are the full default behaviors:

89 88

91| ------------------------------- | -------------------------------------------------------- | ----------------------------------------------------- | ------------------------------------------------------ |90| ------------------------------- | -------------------------------------------------------------------- | ----------------------------------------------------- | ------------------------------------------------------ | ------------------------------------------------------ |

94| **Session quality surveys** | Default on.<br />`CLAUDE_CODE_DISABLE_FEEDBACK_SURVEY=1` to disable. | Default off.<br />`CLAUDE_CODE_USE_VERTEX` must be 1. | Default off.<br />`CLAUDE_CODE_USE_BEDROCK` must be 1. | Default off.<br />`CLAUDE_CODE_USE_FOUNDRY` must be 1. |

95 95

96All environment variables can be checked into `settings.json` ([read more](/en/settings)).96All environment variables can be checked into `settings.json` ([read more](/en/settings)).

100> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

desktop.md +261 −44

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Claude Code on desktop5# Claude Code on desktop

2 6

3> Run Claude Code tasks locally or on secure cloud infrastructure with the Claude desktop app7> Run Claude Code tasks locally or on secure cloud infrastructure with the Claude desktop app

4 8

5<img src="https://mintcdn.com/claude-code/zEGbGSbinVtT3BLw/images/desktop-interface.png?fit=max&auto=format&n=zEGbGSbinVtT3BLw&q=85&s=c4e9dc9737b437d36ab253b75a1cc595" alt="Claude Code on desktop interface" data-og-width="4132" width="4132" data-og-height="2620" height="2620" data-path="images/desktop-interface.png" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/zEGbGSbinVtT3BLw/images/desktop-interface.png?w=280&fit=max&auto=format&n=zEGbGSbinVtT3BLw&q=85&s=b1a8421a544c3e8c78679fa1a7b56190 280w, https://mintcdn.com/claude-code/zEGbGSbinVtT3BLw/images/desktop-interface.png?w=560&fit=max&auto=format&n=zEGbGSbinVtT3BLw&q=85&s=79cf4ea0923098cc429198678ea50903 560w, https://mintcdn.com/claude-code/zEGbGSbinVtT3BLw/images/desktop-interface.png?w=840&fit=max&auto=format&n=zEGbGSbinVtT3BLw&q=85&s=14bcbcd569d179770fe656686ffbf6bf 840w, https://mintcdn.com/claude-code/zEGbGSbinVtT3BLw/images/desktop-interface.png?w=1100&fit=max&auto=format&n=zEGbGSbinVtT3BLw&q=85&s=b873274db1e9ff8585ba545032aa24a5 1100w, https://mintcdn.com/claude-code/zEGbGSbinVtT3BLw/images/desktop-interface.png?w=1650&fit=max&auto=format&n=zEGbGSbinVtT3BLw&q=85&s=25553dced783c3a8c2a1134a53295f7e 1650w, https://mintcdn.com/claude-code/zEGbGSbinVtT3BLw/images/desktop-interface.png?w=2500&fit=max&auto=format&n=zEGbGSbinVtT3BLw&q=85&s=9ad49e6468c2f87b1895093deeea7bb2 2500w" />9<Note>

10 Claude Code on desktop is currently in preview.

11</Note>

13Claude Code is an AI coding assistant that works directly with your codebase. Unlike Claude.ai chat, it can read your project files, edit code, run terminal commands, and understand how different parts of your code connect. You watch changes happen in real time.

15You can use Claude Code through the terminal ([CLI](/en/quickstart)) or through the desktop app described here. Both provide the same core capabilities. The desktop app adds a graphical interface and visual session management.

17<CardGroup cols={2}>

18 <Card title="New to Claude Code?" icon="rocket" href="#installation-and-setup">

19 Start here to install and make your first edit

20 </Card>

22 <Card title="Coming from the CLI?" icon="terminal" href="#how-desktop-relates-to-cli">

23 See what's shared and what's different

24 </Card>

25</CardGroup>

27The desktop app has three tabs:

29* **Chat**: A conversational interface for general questions and tasks (like Claude.ai)

30* **Cowork**: An autonomous agent that works on tasks in the background

31* **Code**: An AI coding assistant that reads and edits your project files directly

33This documentation covers the **Code** tab. For the chat interface, see the [Claude Desktop support articles](https://support.claude.com/en/collections/16163169-claude-desktop).

35## Installation and setup

37<Steps>

38 <Step title="Download the app">

39 Download Claude for your platform. You'll need an Anthropic account ([sign up at claude.ai](https://claude.ai) if you don't have one).

41 <CardGroup cols={2}>

42 <Card title="macOS" icon="apple" href="https://claude.ai/api/desktop/darwin/universal/dmg/latest/redirect?utm_source=claude_code&utm_medium=docs">

43 Universal build for Intel and Apple Silicon

44 </Card>

46 <Card title="Windows" icon="windows" href="https://claude.ai/api/desktop/win32/x64/exe/latest/redirect?utm_source=claude_code&utm_medium=docs">

47 For x64 processors

48 </Card>

49 </CardGroup>

51 For Windows ARM64, [download here](https://claude.ai/api/desktop/win32/arm64/exe/latest/redirect?utm_source=claude_code\&utm_medium=docs). Local sessions are not available on ARM64 devices, so use remote sessions instead.

53 Linux is not currently supported.

54 </Step>

56 <Step title="Open the app and sign in">

57 Launch Claude from your Applications folder (macOS) or Start menu (Windows). Sign in with your Anthropic account.

58 </Step>

60 <Step title="Select the Code tab">

61 Click the **Code** tab in the top left. If clicking Code prompts you to sign in online, complete the sign-in and restart the app.

62 </Step>

63</Steps>

65## Getting started

67If you already use the CLI, you can skip to [How Desktop relates to CLI](#how-desktop-relates-to-cli) for a quick overview of differences.

69<Steps>

70 <Step title="Choose a folder and environment">

71 Select **Local** to run Claude on your machine using your files directly. This is the best choice for getting started. Click **Select folder** and choose your project directory.

73 You can also run [remote sessions](/en/claude-code-on-the-web) that continue in the cloud even if you close the app.

74 </Step>

6 75

~~7## Claude Code on desktop (Preview)~~76 <Step title="Start a session">

77 Type what you want Claude to do:

8 78

~~9The Claude desktop app provides a native interface for running multiple Claude Code sessions on your local machine and seamless integration with Claude Code on the web.~~79 * "Find a TODO comment and fix it"

80 * "Add tests for the main function"

81 * "Create a CLAUDE.md with instructions for this codebase"

10 82

~~11## Features~~83 A **session** is a conversation with Claude about your code. Each session tracks its own context and changes, so you can work on multiple tasks without them interfering with each other.

84 </Step>

12 85

~~13Claude Code on desktop provides:~~86 <Step title="Review and accept changes">

87 By default, Code is in **Ask** mode, where Claude proposes changes and waits for your approval before applying them. You'll see:

14 88

~~15* **Parallel local sessions with `git` worktrees**: Run multiple Claude Code sessions simultaneously in the same repository, each with its own isolated `git` worktree~~89 1. **A diff view** showing exactly what will change in each file

~~16* **Include files listed in your `.gitignore` in your worktrees**: Automatically copy files in your `.gitignore`, like `.env`, to new worktrees using `.worktreeinclude`~~90 2. **Accept/Reject buttons** to approve or decline each change

~~17* **Launch Claude Code on the web**: Kick off secure cloud sessions directly from the desktop app~~91 3. **Real-time updates** as Claude works through your request

18 92

~~19## Installation~~93 If you reject a change, Claude will ask how you'd like to proceed differently. Your files aren't modified until you accept.

94 </Step>

95</Steps>

20 96

~~21Download and install the Claude Desktop app from [claude.ai/download](https://claude.ai/download)~~97The sections below cover commands, permission modes, parallel sessions, and ways to extend Claude Code with custom workflows and integrations.

99## What you can do

100

101Claude Code can edit files, run terminal commands, and understand how your code connects. Try prompts like:

102

103* `Fix the bug in the login function`

104* `Run the tests and fix any failures`

105* `How does the authentication flow work?`

106

107You can rename, resume, and archive sessions through the sidebar.

108

109### Choose a permission mode

110

111Control how Claude works using the mode selector next to the send button:

112

113* **Ask** (recommended for new users): Claude asks for your approval before each file edit or command. You see a diff view and can accept or reject each change.

114* **Code**: Claude auto-accepts file edits but still asks before running terminal commands. Use this when you trust file changes and want faster iteration.

115* **Plan**: Claude creates a detailed plan for your approval before making any changes. Good for complex tasks where you want to review the approach first.

116

117To stop Claude mid-task, click the stop button.

118

119Remote sessions only support **Code** and **Plan** modes because they continue running in the background without requiring your active participation. See [permission modes](/en/permissions#permission-modes) for details on how these work internally.

120

121### Work in parallel with sessions

122

123Click **+ New session** in the sidebar to work on multiple tasks in parallel. For Git repositories, each session gets its own isolated copy of your project using worktrees, so changes in one session don't affect another until you commit them. Worktrees are stored in `~/.claude-worktrees/` by default.

22 124

23<Note>125<Note>

~~24 Local sessions are not available on Windows arm64 architectures.~~126 Session isolation requires [Git](https://git-scm.com/downloads). Without Git, sessions in the same directory edit the same files, so changes in one session are immediately visible in others.

25</Note>127</Note>

26 128

~~27## Using Git worktrees~~129To include files listed in your `.gitignore` (like `.env`) in new worktrees, create a `.worktreeinclude` file in your project root listing the file patterns to copy.

130

131To manage a session, click its dropdown in the sidebar to rename it, archive it, or check context usage. When context fills up, Claude automatically summarizes the conversation. You can also ask Claude to compact if you want to free up space earlier.

132

133### Run long-running tasks remotely

134

135For large refactors, test suites, migrations, or other long-running tasks, select **Remote** instead of **Local** when starting a session. Remote sessions run on Anthropic's cloud infrastructure and continue even if you close the app or shut down your computer. Check back anytime to see progress or steer Claude in a different direction.

136

137Remote sessions support **Code** and **Plan** modes. See [Claude Code on the web](/en/claude-code-on-the-web) for details on configuring remote environments.

138

139### Review changes with diff view

140

141After Claude makes changes to your code, the diff view lets you review modifications file by file before creating a pull request.

142

143When Claude changes files, a diff stats indicator appears showing the number of lines added and removed (for example, `+12 -1`). Click this indicator to open the diff viewer, which displays a file list on the left and the changes for each file on the right.

144

145To comment on specific lines, click any line in the diff to open a comment box. Type your feedback and press **Enter** to send. In the full diff view, press **Enter** to accept each comment, then **Cmd+Enter** to send them all. Claude reads your comments and makes the requested changes, which appear as a new diff you can review.

146

147## Extend Claude Code

148

149You can extend Claude Code with custom commands, automated workflows, and external integrations.

28 150

29Claude Code on desktop enables running multiple Claude Code sessions in the same repository using Git worktrees. Each session gets its own isolated worktree, allowing Claude to work on different tasks without conflicts. The default location for worktrees is `~/.claude-worktrees` but this can be configured in your settings on the Claude desktop app.151### Connect external tools

152

153For local sessions, click the **...** button before starting and select **Connectors** to add integrations like Google Calendar, Slack, GitHub, Linear, Notion, and more. Connectors must be configured before the session starts and are only available for local sessions. Once connected, Claude can read your calendar, send messages, create issues, and interact with your tools directly. You can ask Claude what connectors are configured in your session.

154

155Connectors are [MCP (Model Context Protocol) servers](/en/mcp) with built-in setup. You can also [create custom connectors](https://support.claude.com/en/articles/11175166-getting-started-with-custom-connectors-using-remote-mcp) or add MCP servers manually via [configuration files](/en/mcp#configure-mcp-servers).

156

157### Create custom skills

158

159[Skills](/en/skills) are reusable prompts that extend Claude's capabilities. For example, you could create a `review` skill that runs your standard code review checklist, or a `deploy` skill that walks through your deployment steps. Skills are defined as markdown files in `.claude/skills/` and can include instructions, context, and even call other tools. Ask Claude what skills are available or to run a specific skill. Claude can also help you create a skill if you describe what you want, or see [skills](/en/skills) to learn how to write them yourself.

160

161### Automate workflows with hooks

162

163[Hooks](/en/hooks) run shell commands automatically in response to Claude Code events. For example, you could run a linter after every file edit, auto-format code, or send notifications when tasks complete. Hooks are configured in your [settings files](/en/settings). See [hooks](/en/hooks) for available events and configuration examples.

164

165## Environment configuration

166

167When starting a session, you choose between **Local** (runs on your machine) or **Remote** (runs on Anthropic's cloud).

168

169**Local sessions** inherit environment variables from your shell. If you need additional variables, set them in your shell profile (`~/.zshrc`, `~/.bashrc`) and restart the desktop app. See [environment variables](/en/settings#environment-variables) for the full list of supported variables.

170

171[Extended thinking](/en/common-workflows#use-extended-thinking-thinking-mode) is enabled by default, which improves performance on complex reasoning tasks but uses additional tokens. The thinking process runs in the background but isn't displayed in the Desktop interface. To disable it or adjust the budget, set `MAX_THINKING_TOKENS` in your shell profile (use `0` to disable).

172

173**Remote sessions** run on Anthropic's cloud infrastructure and continue even if you close the app. Usage counts toward your subscription plan limits with no separate compute charges. See [Claude Code on the web](/en/claude-code-on-the-web) for details on configuring remote environments.

174

175## How Desktop relates to CLI

176

177If you already use the Claude Code CLI, Desktop runs the same underlying engine with a graphical interface. You can run both simultaneously on the same machine, even on the same project. Each maintains separate session history, but they share configuration and project memory (CLAUDE.md files).

178

179### CLI flag equivalents

180

181If you're used to CLI flags, the table below shows the Desktop equivalent for each. Some flags have no Desktop equivalent because they're designed for scripting or automation.

182

183| CLI | Desktop equivalent |

184| ------------------------------------- | ---------------------------------------------- |

185| `--model sonnet` | **...** menu > Model (before starting session) |

186| `--resume`, `--continue` | Click a session in the sidebar |

187| `--allowedTools`, `--disallowedTools` | Not available in Desktop |

188| `--dangerously-skip-permissions` | Not available in Desktop |

189| `--print` | Not available (Desktop is interactive) |

190

191### Shared configuration

192

193Desktop and CLI read the same configuration files, so your setup carries over:

194

195* **[CLAUDE.md](/en/memory)** and **CLAUDE.local.md** files in your project are used by both

196* **[MCP servers](/en/mcp)** configured in `~/.claude.json` or `.mcp.json` work in both

197* **[Hooks](/en/hooks)** and **[skills](/en/skills)** defined in settings apply to both

198* **[Settings](/en/settings)** in `~/.claude.json` and `~/.claude/settings.json` are shared

199* **Models** (Sonnet, Opus, Haiku) are available in both (Desktop requires selecting before starting a session)

30 200

31<Note>201<Note>

~~32 If you start a local session in a folder that does not have Git initialized, the desktop app will not create a new worktree.~~202 MCP servers configured for the **Claude Desktop chat app** (in `claude_desktop_config.json`) are separate from Claude Code. To use MCP servers in Claude Code, configure them in `~/.claude.json` or your project's `.mcp.json` file. See [MCP configuration](/en/mcp#configure-mcp-servers) for details.

33</Note>203</Note>

34 204

~~35### Copying files ignored with `.gitignore`~~205### What's different

36 206

37When Claude Code creates a worktree, files ignored via `.gitignore` aren't automatically available. Including a `.worktreeinclude` file solves this by specifying which ignored files should be copied to new worktrees.207**Desktop adds:**

38 208

~~39Create a `.worktreeinclude` file in your repository root:~~209* Graphical interface with visual session management

210* Built-in connectors for common integrations

211* Automatic session isolation for Git repositories (each session gets its own worktree)

40 212

~~41```~~213**CLI adds:**

~~42.env~~214

~~43.env.local~~215* [Third-party API providers](/en/third-party-integrations) (Bedrock, Vertex, Foundry). If you use these, continue using CLI for those projects.

~~44.env.*~~216* [CLI flags](/en/cli-reference) for scripting (`--print`, `--resume`, `--continue`)

~~45**/.claude/settings.local.json~~217* [Programmatic usage](/en/headless) via the Agent SDK

218

219## Troubleshooting

220

221Solutions to common issues with the Claude desktop app. For CLI issues, see [CLI troubleshooting](/en/troubleshooting).

222

223### Check your version

224

225To see which version of the desktop app you're running:

226

227* **macOS**: Click **Claude** in the menu bar, then **About Claude**

228* **Windows**: Click **Help**, then **About**

229

230Click the version number to copy it to your clipboard.

231

232### "Branch doesn't exist yet" when opening in CLI

233

234Remote sessions can create branches that don't exist on your local machine. Click the branch name in the session toolbar to copy it, then fetch it locally:

235

236```bash theme={null}

237git fetch origin <branch-name>

238git checkout <branch-name>

46```239```

47 240

~~48The file uses `.gitignore`-style patterns. When a worktree is created, files matching these patterns that are also in your `.gitignore` will be copied from your main repository to the worktree.~~241### "Failed to load session" error

49 242

~~50<Tip>~~243This error can occur for several reasons:

~~51 Only files that are both matched by `.worktreeinclude` AND listed in `.gitignore` are copied. This prevents accidentally duplicating tracked files.~~

~~52</Tip>~~

53 244

~~54### Launch Claude Code on the web~~245* The selected folder no longer exists or is inaccessible

246* A Git repository requires Git LFS but it's not installed (see [Git LFS errors](#git-lfs-errors))

247* File permissions prevent access to the project directory

55 248

~~56From the desktop app, you can kick off Claude Code sessions that run on Anthropic's secure cloud infrastructure. This is useful for:~~249Try selecting a different folder or restarting the desktop app.

57 250

~~58To start a web session from desktop, select a remote environment when creating a new session.~~251### App won't quit

59 252

~~60For more details, see [Claude Code on the web](/en/claude-code-on-the-web).~~253If the desktop app doesn't close properly:

61 254

~~62## Bundled Claude Code version~~255* **macOS**: Press Cmd+Q. If the app doesn't respond, use Force Quit (Cmd+Option+Esc, select Claude, click Force Quit).

256* **Windows**: Use Task Manager (Ctrl+Shift+Esc) to end the Claude process.

63 257

64Claude Code on desktop includes a bundled, stable version of Claude Code to ensure a consistent experience for all desktop users. The bundled version is required and downloaded on first launch even if a version of Claude Code exists on the computer. Desktop automatically manages version updates and cleans up old versions.258### Windows installation issues

65 259

~~66<Note>~~260If the installer fails silently or doesn't complete properly:

~~67 The bundled Claude Code version in Desktop may differ from the latest CLI version. Desktop prioritizes stability while the CLI may have newer features.~~

~~68</Note>~~

69 261

~~70### Enterprise configuration~~2621. **PATH not updated**: After installation, open a new terminal window. The PATH updates only apply to new terminal sessions.

2632. **Concurrent installation error**: If you see an error about another installation in progress but there isn't one, try running the installer as Administrator.

71 264

72Organizations can disable local Claude Code use in the desktop application with the `isClaudeCodeForDesktopEnabled` [enterprise policy option](https://support.claude.com/en/articles/12622667-enterprise-configuration#h_003283c7cb). Additionally, Claude Code on the web can be disabled in your [admin settings](https://claude.ai/admin-settings/claude-code).265### Session not finding installed tools

73 266

~~74## Related resources~~267If Claude can't find tools like `npm`, `node`, or other CLI commands:

268

2691. Verify the tools work in your regular terminal

2702. Check that your shell profile (`~/.zshrc`, `~/.bashrc`) properly sets up PATH

2713. Restart the desktop app to reload environment variables

272

273### MCP servers not working (Windows)

274

275If MCP server toggles don't respond or servers fail to connect on Windows:

276

2771. Check that the MCP server is properly configured in your settings

2782. Restart the desktop app after making changes

2793. Verify the MCP server process is running (check Task Manager)

2804. Review the server logs for connection errors

75 281

~~76* [Claude Code on the web](/en/claude-code-on-the-web)~~282### Git LFS errors

~~77* [Claude Desktop support articles](https://support.claude.com/en/collections/16163169-claude-desktop)~~

~~78* [Enterprise Configuration](https://support.claude.com/en/articles/12622667-enterprise-configuration)~~

~~79* [Common workflows](/en/common-workflows)~~

~~80* [Settings reference](/en/settings)~~

81 283

284If you see "Git LFS is required by this repository but is not installed," your repository uses Git Large File Storage for large binary files. Install Git LFS before opening this repository:

82 285

2861. Install Git LFS from [git-lfs.com](https://git-lfs.com/)

2872. Run `git lfs install` in your terminal

2883. Restart the desktop app

289

290## Enterprise configuration

291

292Organizations can disable local Claude Code use in the desktop application with the `isClaudeCodeForDesktopEnabled` [enterprise policy option](https://support.claude.com/en/articles/12622667-enterprise-configuration#h_003283c7cb). Additionally, Claude Code on the web can be disabled in your [admin settings](https://claude.ai/admin-settings/claude-code).

293

294## Related resources

83 295

~~84> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt~~296* [Claude Code on the web](/en/claude-code-on-the-web): Run remote sessions that continue in the cloud

297* [CLI reference](/en/cli-reference): Use Claude Code in your terminal with flags and scripting

298* [Common workflows](/en/common-workflows): Tutorials for debugging, refactoring, testing, and more

299* [Settings reference](/en/settings): Configure Claude Code behavior with settings files

300* [Claude Desktop support](https://support.claude.com/en/collections/16163169-claude-desktop): Help articles for the Chat tab and general desktop app usage

301* [Enterprise configuration](https://support.claude.com/en/articles/12622667-enterprise-configuration): Admin policies for organizational deployments

devcontainer.md +4 −4

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Development containers5# Development containers

2 6

3> Learn about the Claude Code development container for teams that need consistent, secure environments.7> Learn about the Claude Code development container for teams that need consistent, secure environments.

75* [VS Code devcontainers documentation](https://code.visualstudio.com/docs/devcontainers/containers)79* [VS Code devcontainers documentation](https://code.visualstudio.com/docs/devcontainers/containers)

76* [Claude Code security best practices](/en/security)80* [Claude Code security best practices](/en/security)

77* [Enterprise network configuration](/en/network-config)81* [Enterprise network configuration](/en/network-config)

~~81> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt~~

discover-plugins.md +393 −0 added

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

5# Discover and install prebuilt plugins through marketplaces

7> Find and install plugins from marketplaces to extend Claude Code with new commands, agents, and capabilities.

9Plugins extend Claude Code with skills, agents, hooks, and MCP servers. Plugin marketplaces are catalogs that help you discover and install these extensions without building them yourself.

11Looking to create and distribute your own marketplace? See [Create and distribute a plugin marketplace](/en/plugin-marketplaces).

13## How marketplaces work

15A marketplace is a catalog of plugins that someone else has created and shared. Using a marketplace is a two-step process:

17<Steps>

18 <Step title="Add the marketplace">

19 This registers the catalog with Claude Code so you can browse what's available. No plugins are installed yet.

20 </Step>

22 <Step title="Install individual plugins">

23 Browse the catalog and install the plugins you want.

24 </Step>

25</Steps>

27Think of it like adding an app store: adding the store gives you access to browse its collection, but you still choose which apps to download individually.

29## Official Anthropic marketplace

31The official Anthropic marketplace (`claude-plugins-official`) is automatically available when you start Claude Code. Run `/plugin` and go to the **Discover** tab to browse what's available.

33To install a plugin from the official marketplace:

35```shell theme={null}

36/plugin install plugin-name@claude-plugins-official

37```

39<Note>

40 The official marketplace is maintained by Anthropic. To distribute your own plugins, [create your own marketplace](/en/plugin-marketplaces) and share it with users.

41</Note>

43The official marketplace includes several categories of plugins:

45### Code intelligence

47Code intelligence plugins enable Claude Code's built-in LSP tool, giving Claude the ability to jump to definitions, find references, and see type errors immediately after edits. These plugins configure [Language Server Protocol](https://microsoft.github.io/language-server-protocol/) connections, the same technology that powers VS Code's code intelligence.

49These plugins require the language server binary to be installed on your system. If you already have a language server installed, Claude may prompt you to install the corresponding plugin when you open a project.

51| Language | Plugin | Binary required |

52| :--------- | :------------------ | :--------------------------- |

53| C/C++ | `clangd-lsp` | `clangd` |

54| C# | `csharp-lsp` | `csharp-ls` |

55| Go | `gopls-lsp` | `gopls` |

56| Java | `jdtls-lsp` | `jdtls` |

57| Kotlin | `kotlin-lsp` | `kotlin-language-server` |

58| Lua | `lua-lsp` | `lua-language-server` |

59| PHP | `php-lsp` | `intelephense` |

60| Python | `pyright-lsp` | `pyright-langserver` |

61| Rust | `rust-analyzer-lsp` | `rust-analyzer` |

62| Swift | `swift-lsp` | `sourcekit-lsp` |

63| TypeScript | `typescript-lsp` | `typescript-language-server` |

65You can also [create your own LSP plugin](/en/plugins-reference#lsp-servers) for other languages.

67<Note>

68 If you see `Executable not found in $PATH` in the `/plugin` Errors tab after installing a plugin, install the required binary from the table above.

69</Note>

71#### What Claude gains from code intelligence plugins

73Once a code intelligence plugin is installed and its language server binary is available, Claude gains two capabilities:

75* **Automatic diagnostics**: after every file edit Claude makes, the language server analyzes the changes and reports errors and warnings back automatically. Claude sees type errors, missing imports, and syntax issues without needing to run a compiler or linter. If Claude introduces an error, it notices and fixes the issue in the same turn. This requires no configuration beyond installing the plugin. You can see diagnostics inline by pressing **Ctrl+O** when the "diagnostics found" indicator appears.

76* **Code navigation**: Claude can use the language server to jump to definitions, find references, get type info on hover, list symbols, find implementations, and trace call hierarchies. These operations give Claude more precise navigation than grep-based search, though availability may vary by language and environment.

78If you run into issues, see [Code intelligence troubleshooting](#code-intelligence-issues).

80### External integrations

82These plugins bundle pre-configured [MCP servers](/en/mcp) so you can connect Claude to external services without manual setup:

84* **Source control**: `github`, `gitlab`

85* **Project management**: `atlassian` (Jira/Confluence), `asana`, `linear`, `notion`

86* **Design**: `figma`

87* **Infrastructure**: `vercel`, `firebase`, `supabase`

88* **Communication**: `slack`

89* **Monitoring**: `sentry`

91### Development workflows

93Plugins that add commands and agents for common development tasks:

95* **commit-commands**: Git commit workflows including commit, push, and PR creation

96* **pr-review-toolkit**: Specialized agents for reviewing pull requests

97* **agent-sdk-dev**: Tools for building with the Claude Agent SDK

98* **plugin-dev**: Toolkit for creating your own plugins

100### Output styles

101

102Customize how Claude responds:

103

104* **explanatory-output-style**: Educational insights about implementation choices

105* **learning-output-style**: Interactive learning mode for skill building

106

107## Try it: add the demo marketplace

108

109Anthropic also maintains a [demo plugins marketplace](https://github.com/anthropics/claude-code/tree/main/plugins) (`claude-code-plugins`) with example plugins that show what's possible with the plugin system. Unlike the official marketplace, you need to add this one manually.

110

111<Steps>

112 <Step title="Add the marketplace">

113 From within Claude Code, run the `plugin marketplace add` command for the `anthropics/claude-code` marketplace:

114

115 ```shell theme={null}

116 /plugin marketplace add anthropics/claude-code

117 ```

118

119 This downloads the marketplace catalog and makes its plugins available to you.

120 </Step>

121

122 <Step title="Browse available plugins">

123 Run `/plugin` to open the plugin manager. This opens a tabbed interface with four tabs you can cycle through using **Tab** (or **Shift+Tab** to go backward):

124

125 * **Discover**: browse available plugins from all your marketplaces

126 * **Installed**: view and manage your installed plugins

127 * **Marketplaces**: add, remove, or update your added marketplaces

128 * **Errors**: view any plugin loading errors

129

130 Go to the **Discover** tab to see plugins from the marketplace you just added.

131 </Step>

132

133 <Step title="Install a plugin">

134 Select a plugin to view its details, then choose an installation scope:

135

136 * **User scope**: install for yourself across all projects

137 * **Project scope**: install for all collaborators on this repository

138 * **Local scope**: install for yourself in this repository only

139

140 For example, select **commit-commands** (a plugin that adds git workflow commands) and install it to your user scope.

141

142 You can also install directly from the command line:

143

144 ```shell theme={null}

145 /plugin install commit-commands@anthropics-claude-code

146 ```

147

148 See [Configuration scopes](/en/settings#configuration-scopes) to learn more about scopes.

149 </Step>

150

151 <Step title="Use your new plugin">

152 After installing, the plugin's commands are immediately available. Plugin commands are namespaced by the plugin name, so **commit-commands** provides commands like `/commit-commands:commit`.

153

154 Try it out by making a change to a file and running:

155

156 ```shell theme={null}

157 /commit-commands:commit

158 ```

159

160 This stages your changes, generates a commit message, and creates the commit.

161

162 Each plugin works differently. Check the plugin's description in the **Discover** tab or its homepage to learn what commands and capabilities it provides.

163 </Step>

164</Steps>

165

166The rest of this guide covers all the ways you can add marketplaces, install plugins, and manage your configuration.

167

168## Add marketplaces

169

170Use the `/plugin marketplace add` command to add marketplaces from different sources.

171

172<Tip>

173 **Shortcuts**: You can use `/plugin market` instead of `/plugin marketplace`, and `rm` instead of `remove`.

174</Tip>

175

176* **GitHub repositories**: `owner/repo` format (for example, `anthropics/claude-code`)

177* **Git URLs**: any git repository URL (GitLab, Bitbucket, self-hosted)

178* **Local paths**: directories or direct paths to `marketplace.json` files

179* **Remote URLs**: direct URLs to hosted `marketplace.json` files

180

181### Add from GitHub

182

183Add a GitHub repository that contains a `.claude-plugin/marketplace.json` file using the `owner/repo` format—where `owner` is the GitHub username or organization and `repo` is the repository name.

184

185For example, `anthropics/claude-code` refers to the `claude-code` repository owned by `anthropics`:

186

187```shell theme={null}

188/plugin marketplace add anthropics/claude-code

189```

190

191### Add from other Git hosts

192

193Add any git repository by providing the full URL. This works with any Git host, including GitLab, Bitbucket, and self-hosted servers:

194

195Using HTTPS:

196

197```shell theme={null}

198/plugin marketplace add https://gitlab.com/company/plugins.git

199```

200

201Using SSH:

202

203```shell theme={null}

204/plugin marketplace add git@gitlab.com:company/plugins.git

205```

206

207To add a specific branch or tag, append `#` followed by the ref:

208

209```shell theme={null}

210/plugin marketplace add https://gitlab.com/company/plugins.git#v1.0.0

211```

212

213### Add from local paths

214

215Add a local directory that contains a `.claude-plugin/marketplace.json` file:

216

217```shell theme={null}

218/plugin marketplace add ./my-marketplace

219```

220

221You can also add a direct path to a `marketplace.json` file:

222

223```shell theme={null}

224/plugin marketplace add ./path/to/marketplace.json

225```

226

227### Add from remote URLs

228

229Add a remote `marketplace.json` file via URL:

230

231```shell theme={null}

232/plugin marketplace add https://example.com/marketplace.json

233```

234

235<Note>

236 URL-based marketplaces have some limitations compared to Git-based marketplaces. If you encounter "path not found" errors when installing plugins, see [Troubleshooting](/en/plugin-marketplaces#plugins-with-relative-paths-fail-in-url-based-marketplaces).

237</Note>

238

239## Install plugins

240

241Once you've added marketplaces, you can install plugins directly (installs to user scope by default):

242

243```shell theme={null}

244/plugin install plugin-name@marketplace-name

245```

246

247To choose a different [installation scope](/en/settings#configuration-scopes), use the interactive UI: run `/plugin`, go to the **Discover** tab, and press **Enter** on a plugin. You'll see options for:

248

249* **User scope** (default): install for yourself across all projects

250* **Project scope**: install for all collaborators on this repository (adds to `.claude/settings.json`)

251* **Local scope**: install for yourself in this repository only (not shared with collaborators)

252

253You may also see plugins with **managed** scope—these are installed by administrators via [managed settings](/en/settings#settings-files) and cannot be modified.

254

255Run `/plugin` and go to the **Installed** tab to see your plugins grouped by scope.

256

257<Warning>

258 Make sure you trust a plugin before installing it. Anthropic does not control what MCP servers, files, or other software are included in plugins and cannot verify that they work as intended. Check each plugin's homepage for more information.

259</Warning>

260

261## Manage installed plugins

262

263Run `/plugin` and go to the **Installed** tab to view, enable, disable, or uninstall your plugins. Type to filter the list by plugin name or description.

264

265You can also manage plugins with direct commands.

266

267Disable a plugin without uninstalling:

268

269```shell theme={null}

270/plugin disable plugin-name@marketplace-name

271```

272

273Re-enable a disabled plugin:

274

275```shell theme={null}

276/plugin enable plugin-name@marketplace-name

277```

278

279Completely remove a plugin:

280

281```shell theme={null}

282/plugin uninstall plugin-name@marketplace-name

283```

284

285The `--scope` option lets you target a specific scope with CLI commands:

286

287```shell theme={null}

288claude plugin install formatter@your-org --scope project

289claude plugin uninstall formatter@your-org --scope project

290```

291

292## Manage marketplaces

293

294You can manage marketplaces through the interactive `/plugin` interface or with CLI commands.

295

296### Use the interactive interface

297

298Run `/plugin` and go to the **Marketplaces** tab to:

299

300* View all your added marketplaces with their sources and status

301* Add new marketplaces

302* Update marketplace listings to fetch the latest plugins

303* Remove marketplaces you no longer need

304

305### Use CLI commands

306

307You can also manage marketplaces with direct commands.

308

309List all configured marketplaces:

310

311```shell theme={null}

312/plugin marketplace list

313```

314

315Refresh plugin listings from a marketplace:

316

317```shell theme={null}

318/plugin marketplace update marketplace-name

319```

320

321Remove a marketplace:

322

323```shell theme={null}

324/plugin marketplace remove marketplace-name

325```

326

327<Warning>

328 Removing a marketplace will uninstall any plugins you installed from it.

329</Warning>

330

331### Configure auto-updates

332

333Claude Code can automatically update marketplaces and their installed plugins at startup. When auto-update is enabled for a marketplace, Claude Code refreshes the marketplace data and updates installed plugins to their latest versions. If any plugins were updated, you'll see a notification suggesting you restart Claude Code.

334

335Toggle auto-update for individual marketplaces through the UI:

336

3371. Run `/plugin` to open the plugin manager

3382. Select **Marketplaces**

3393. Choose a marketplace from the list

3404. Select **Enable auto-update** or **Disable auto-update**

341

342Official Anthropic marketplaces have auto-update enabled by default. Third-party and local development marketplaces have auto-update disabled by default.

343

344To disable all automatic updates entirely for both Claude Code and all plugins, set the `DISABLE_AUTOUPDATER` environment variable. See [Auto updates](/en/setup#auto-updates) for details.

345

346To keep plugin auto-updates enabled while disabling Claude Code auto-updates, set `FORCE_AUTOUPDATE_PLUGINS=true` along with `DISABLE_AUTOUPDATER`:

347

348```shell theme={null}

349export DISABLE_AUTOUPDATER=true

350export FORCE_AUTOUPDATE_PLUGINS=true

351```

352

353This is useful when you want to manage Claude Code updates manually but still receive automatic plugin updates.

354

355## Configure team marketplaces

356

357Team admins can set up automatic marketplace installation for projects by adding marketplace configuration to `.claude/settings.json`. When team members trust the repository folder, Claude Code prompts them to install these marketplaces and plugins.

358

359For full configuration options including `extraKnownMarketplaces` and `enabledPlugins`, see [Plugin settings](/en/settings#plugin-settings).

360

361## Troubleshooting

362

363### /plugin command not recognized

364

365If you see "unknown command" or the `/plugin` command doesn't appear:

366

3671. **Check your version**: Run `claude --version`. Plugins require version 1.0.33 or later.

3682. **Update Claude Code**:

369 * **Homebrew**: `brew upgrade claude-code`

370 * **npm**: `npm update -g @anthropic-ai/claude-code`

371 * **Native installer**: Re-run the install command from [Setup](/en/setup)

3723. **Restart Claude Code**: After updating, restart your terminal and run `claude` again.

373

374### Common issues

375

376* **Marketplace not loading**: Verify the URL is accessible and that `.claude-plugin/marketplace.json` exists at the path

377* **Plugin installation failures**: Check that plugin source URLs are accessible and repositories are public (or you have access)

378* **Files not found after installation**: Plugins are copied to a cache, so paths referencing files outside the plugin directory won't work

379* **Plugin skills not appearing**: Clear the cache with `rm -rf ~/.claude/plugins/cache`, restart Claude Code, and reinstall the plugin.

380

381For detailed troubleshooting with solutions, see [Troubleshooting](/en/plugin-marketplaces#troubleshooting) in the marketplace guide. For debugging tools, see [Debugging and development tools](/en/plugins-reference#debugging-and-development-tools).

382

383### Code intelligence issues

384

385* **Language server not starting**: verify the binary is installed and available in your `$PATH`. Check the `/plugin` Errors tab for details.

386* **High memory usage**: language servers like `rust-analyzer` and `pyright` can consume significant memory on large projects. If you experience memory issues, disable the plugin with `/plugin disable <plugin-name>` and rely on Claude's built-in search tools instead.

387* **False positive diagnostics in monorepos**: language servers may report unresolved import errors for internal packages if the workspace isn't configured correctly. These don't affect Claude's ability to edit code.

388

389## Next steps

390

391* **Build your own plugins**: See [Plugins](/en/plugins) to create skills, agents, and hooks

392* **Create a marketplace**: See [Create a plugin marketplace](/en/plugin-marketplaces) to distribute plugins to your team or community

393* **Technical reference**: See [Plugins reference](/en/plugins-reference) for complete specifications

fast-mode.md +131 −0 added

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

5# Speed up responses with fast mode

7> Get faster Opus 4.6 responses in Claude Code by toggling fast mode.

9<Note>

10 Fast mode is in [research preview](#research-preview). The feature, pricing, and availability may change based on feedback.

11</Note>

13Fast mode delivers faster Opus 4.6 responses at a higher cost per token. Toggle it on with `/fast` when you need speed for interactive work like rapid iteration or live debugging, and toggle it off when cost matters more than latency.

15Fast mode is not a different model. It uses the same Opus 4.6 with a different API configuration that prioritizes speed over cost efficiency. You get identical quality and capabilities, just faster responses.

17What to know:

19* Use `/fast` to toggle on fast mode in Claude Code CLI. Also available via `/fast` in Claude Code VS Code Extension.

20* Fast mode for Opus 4.6 pricing starts at \$30/150 MTok. Fast mode is available at a 50% discount for all plans until 11:59pm PT on February 16.

21* Available to all Claude Code users on subscription plans (Pro/Max/Team/Enterprise) and Claude Console.

22* For Claude Code users on subscription plans (Pro/Max/Team/Enterprise), fast mode is available via extra usage only and not included in the subscription rate limits.

24This page covers how to [toggle fast mode](#toggle-fast-mode), its [cost tradeoff](#understand-the-cost-tradeoff), [when to use it](#decide-when-to-use-fast-mode), [requirements](#requirements), and [rate limit behavior](#handle-rate-limits).

26## Toggle fast mode

28Toggle fast mode in either of these ways:

30* Type `/fast` and press Tab to toggle on or off

31* Set `"fastMode": true` in your [user settings file](/en/settings)

33Fast mode persists across sessions. For the best cost efficiency, enable fast mode at the start of a session rather than switching mid-conversation. See [understand the cost tradeoff](#understand-the-cost-tradeoff) for details.

35When you enable fast mode:

37* If you're on a different model, Claude Code automatically switches to Opus 4.6

38* You'll see a confirmation message: "Fast mode ON"

39* A small `↯` icon appears next to the prompt while fast mode is active

40* Run `/fast` again at any time to check whether fast mode is on or off

42When you disable fast mode with `/fast` again, you remain on Opus 4.6. The model does not revert to your previous model. To switch to a different model, use `/model`.

44## Understand the cost tradeoff

46Fast mode has higher per-token pricing than standard Opus 4.6:

48| Mode | Input (MTok) | Output (MTok) |

49| ------------------------------ | ------------ | ------------- |

50| Fast mode on Opus 4.6 (\<200K) | \$30 | \$150 |

51| Fast mode on Opus 4.6 (>200K) | \$60 | \$225 |

53Fast mode is compatible with the 1M token extended context window.

55When you switch into fast mode mid-conversation, you pay the full fast mode uncached input token price for the entire conversation context. This costs more than if you had enabled fast mode from the start.

57## Decide when to use fast mode

59Fast mode is best for interactive work where response latency matters more than cost:

61* Rapid iteration on code changes

62* Live debugging sessions

63* Time-sensitive work with tight deadlines

65Standard mode is better for:

67* Long autonomous tasks where speed matters less

68* Batch processing or CI/CD pipelines

69* Cost-sensitive workloads

71### Fast mode vs effort level

73Fast mode and effort level both affect response speed, but differently:

75| Setting | Effect |

76| ---------------------- | -------------------------------------------------------------------------------- |

77| **Fast mode** | Same model quality, lower latency, higher cost |

78| **Lower effort level** | Less thinking time, faster responses, potentially lower quality on complex tasks |

80You can combine both: use fast mode with a lower [effort level](/en/model-config#adjust-effort-level) for maximum speed on straightforward tasks.

82## Requirements

84Fast mode requires all of the following:

86* **Not available on third-party cloud providers**: fast mode is not available on Amazon Bedrock, Google Vertex AI, or Microsoft Azure Foundry. Fast mode is available through the Anthropic Console API and for Claude subscription plans using extra usage.

87* **Extra usage enabled**: your account must have extra usage enabled, which allows billing beyond your plan's included usage. For individual accounts, enable this in your [Console billing settings](https://platform.claude.com/settings/organization/billing). For Teams and Enterprise, an admin must enable extra usage for the organization.

89<Note>

90 Fast mode usage is billed directly to extra usage, even if you have remaining usage on your plan. This means fast mode tokens do not count against your plan's included usage and are charged at the fast mode rate from the first token.

91</Note>

93* **Admin enablement for Teams and Enterprise**: fast mode is disabled by default for Teams and Enterprise organizations. An admin must explicitly [enable fast mode](#enable-fast-mode-for-your-organization) before users can access it.

95<Note>

96 If your admin has not enabled fast mode for your organization, the `/fast` command will show "Fast mode has been disabled by your organization."

97</Note>

99### Enable fast mode for your organization

100

101Admins can enable fast mode in:

102

103* **Console** (API customers): [Claude Code preferences](https://platform.claude.com/claude-code/preferences)

104* **Claude AI** (Teams and Enterprise): [Admin Settings > Claude Code](https://claude.ai/admin-settings/claude-code)

105

106## Handle rate limits

107

108Fast mode has separate rate limits from standard Opus 4.6. When you hit the fast mode rate limit or run out of extra usage credits:

109

1101. Fast mode automatically falls back to standard Opus 4.6

1112. The `↯` icon turns gray to indicate cooldown

1123. You continue working at standard speed and pricing

1134. When the cooldown expires, fast mode automatically re-enables

114

115To disable fast mode manually instead of waiting for cooldown, run `/fast` again.

116

117## Research preview

118

119Fast mode is a research preview feature. This means:

120

121* The feature may change based on feedback

122* Availability and pricing are subject to change

123* The underlying API configuration may evolve

124

125Report issues or feedback through your usual Anthropic support channels.

126

127## See also

128

129* [Model configuration](/en/model-config): switch models and adjust effort levels

130* [Manage costs effectively](/en/costs): track token usage and reduce costs

131* [Status line configuration](/en/statusline): display model and context information

features-overview.md +278 −0 added

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

5# Extend Claude Code

7> Understand when to use CLAUDE.md, Skills, subagents, hooks, MCP, and plugins.

9Claude Code combines a model that reasons about your code with [built-in tools](/en/how-claude-code-works#tools) for file operations, search, execution, and web access. The built-in tools cover most coding tasks. This guide covers the extension layer: features you add to customize what Claude knows, connect it to external services, and automate workflows.

11<Note>

12 For how the core agentic loop works, see [How Claude Code works](/en/how-claude-code-works).

13</Note>

15**New to Claude Code?** Start with [CLAUDE.md](/en/memory) for project conventions. Add other extensions as you need them.

17## Overview

19Extensions plug into different parts of the agentic loop:

21* **[CLAUDE.md](/en/memory)** adds persistent context Claude sees every session

22* **[Skills](/en/skills)** add reusable knowledge and invocable workflows

23* **[MCP](/en/mcp)** connects Claude to external services and tools

24* **[Subagents](/en/sub-agents)** run their own loops in isolated context, returning summaries

25* **[Agent teams](/en/agent-teams)** coordinate multiple independent sessions with shared tasks and peer-to-peer messaging

26* **[Hooks](/en/hooks)** run outside the loop entirely as deterministic scripts

27* **[Plugins](/en/plugins)** and **[marketplaces](/en/plugin-marketplaces)** package and distribute these features

29[Skills](/en/skills) are the most flexible extension. A skill is a markdown file containing knowledge, workflows, or instructions. You can invoke skills with a slash command like `/deploy`, or Claude can load them automatically when relevant. Skills can run in your current conversation or in an isolated context via subagents.

31## Match features to your goal

33Features range from always-on context that Claude sees every session, to on-demand capabilities you or Claude can invoke, to background automation that runs on specific events. The table below shows what's available and when each one makes sense.

36| ---------------------------------- | ---------------------------------------------------------- | ------------------------------------------------------------------------------- | -------------------------------------------------------------------------------- |

41| **MCP** | Connect to external services | External data or actions | Query your database, post to Slack, control a browser |

44**[Plugins](/en/plugins)** are the packaging layer. A plugin bundles skills, hooks, subagents, and MCP servers into a single installable unit. Plugin skills are namespaced (like `/my-plugin:review`) so multiple plugins can coexist. Use plugins when you want to reuse the same setup across multiple repositories or distribute to others via a **[marketplace](/en/plugin-marketplaces)**.

46### Compare similar features

48Some features can seem similar. Here's how to tell them apart.

50<Tabs>

51 <Tab title="Skill vs Subagent">

52 Skills and subagents solve different problems:

54 * **Skills** are reusable content you can load into any context

55 * **Subagents** are isolated workers that run separately from your main conversation

57 | Aspect | Skill | Subagent |

58 | --------------- | ---------------------------------------------- | ---------------------------------------------------------------- |

59 | **What it is** | Reusable instructions, knowledge, or workflows | Isolated worker with its own context |

60 | **Key benefit** | Share content across contexts | Context isolation. Work happens separately, only summary returns |

61 | **Best for** | Reference material, invocable workflows | Tasks that read many files, parallel work, specialized workers |

63 **Skills can be reference or action.** Reference skills provide knowledge Claude uses throughout your session (like your API style guide). Action skills tell Claude to do something specific (like `/deploy` that runs your deployment workflow).

65 **Use a subagent** when you need context isolation or when your context window is getting full. The subagent might read dozens of files or run extensive searches, but your main conversation only receives a summary. Since subagent work doesn't consume your main context, this is also useful when you don't need the intermediate work to remain visible. Custom subagents can have their own instructions and can preload skills.

67 **They can combine.** A subagent can preload specific skills (`skills:` field). A skill can run in isolated context using `context: fork`. See [Skills](/en/skills) for details.

68 </Tab>

70 <Tab title="CLAUDE.md vs Skill">

71 Both store instructions, but they load differently and serve different purposes.

73 | Aspect | CLAUDE.md | Skill |

74 | ------------------------- | ---------------------------- | --------------------------------------- |

75 | **Loads** | Every session, automatically | On demand |

76 | **Can include files** | Yes, with `@path` imports | Yes, with `@path` imports |

77 | **Can trigger workflows** | No | Yes, with `/<name>` |

78 | **Best for** | "Always do X" rules | Reference material, invocable workflows |

80 **Put it in CLAUDE.md** if Claude should always know it: coding conventions, build commands, project structure, "never do X" rules.

82 **Put it in a skill** if it's reference material Claude needs sometimes (API docs, style guides) or a workflow you trigger with `/<name>` (deploy, review, release).

84 **Rule of thumb:** Keep CLAUDE.md under \~500 lines. If it's growing, move reference content to skills.

85 </Tab>

87 <Tab title="Subagent vs Agent team">

88 Both parallelize work, but they're architecturally different:

90 * **Subagents** run inside your session and report results back to your main context

91 * **Agent teams** are independent Claude Code sessions that communicate with each other

93 | Aspect | Subagent | Agent team |

94 | ----------------- | ------------------------------------------------ | --------------------------------------------------- |

95 | **Context** | Own context window; results return to the caller | Own context window; fully independent |

96 | **Communication** | Reports results back to the main agent only | Teammates message each other directly |

97 | **Coordination** | Main agent manages all work | Shared task list with self-coordination |

98 | **Best for** | Focused tasks where only the result matters | Complex work requiring discussion and collaboration |

99 | **Token cost** | Lower: results summarized back to main context | Higher: each teammate is a separate Claude instance |

100

101 **Use a subagent** when you need a quick, focused worker: research a question, verify a claim, review a file. The subagent does the work and returns a summary. Your main conversation stays clean.

102

103 **Use an agent team** when teammates need to share findings, challenge each other, and coordinate independently. Agent teams are best for research with competing hypotheses, parallel code review, and new feature development where each teammate owns a separate piece.

104

105 **Transition point:** If you're running parallel subagents but hitting context limits, or if your subagents need to communicate with each other, agent teams are the natural next step.

106

107 <Note>

108 Agent teams are experimental and disabled by default. See [agent teams](/en/agent-teams) for setup and current limitations.

109 </Note>

110 </Tab>

111

112 <Tab title="MCP vs Skill">

113 MCP connects Claude to external services. Skills extend what Claude knows, including how to use those services effectively.

114

115 | Aspect | MCP | Skill |

116 | -------------- | ---------------------------------------------------- | ------------------------------------------------------- |

117 | **What it is** | Protocol for connecting to external services | Knowledge, workflows, and reference material |

118 | **Provides** | Tools and data access | Knowledge, workflows, reference material |

119 | **Examples** | Slack integration, database queries, browser control | Code review checklist, deploy workflow, API style guide |

120

121 These solve different problems and work well together:

122

123 **MCP** gives Claude the ability to interact with external systems. Without MCP, Claude can't query your database or post to Slack.

124

125 **Skills** give Claude knowledge about how to use those tools effectively, plus workflows you can trigger with `/<name>`. A skill might include your team's database schema and query patterns, or a `/post-to-slack` workflow with your team's message formatting rules.

126

127 Example: An MCP server connects Claude to your database. A skill teaches Claude your data model, common query patterns, and which tables to use for different tasks.

128 </Tab>

129</Tabs>

130

131### Understand how features layer

132

133Features can be defined at multiple levels: user-wide, per-project, via plugins, or through managed policies. You can also nest CLAUDE.md files in subdirectories or place skills in specific packages of a monorepo. When the same feature exists at multiple levels, here's how they layer:

134

135* **CLAUDE.md files** are additive: all levels contribute content to Claude's context simultaneously. Files from your working directory and above load at launch; subdirectories load as you work in them. When instructions conflict, Claude uses judgment to reconcile them, with more specific instructions typically taking precedence. See [how Claude looks up memories](/en/memory#how-claude-looks-up-memories).

136* **Skills and subagents** override by name: when the same name exists at multiple levels, one definition wins based on priority (managed > user > project for skills; managed > CLI flag > project > user > plugin for subagents). Plugin skills are [namespaced](/en/plugins#add-skills-to-your-plugin) to avoid conflicts. See [skill discovery](/en/skills#where-skills-live) and [subagent scope](/en/sub-agents#choose-the-subagent-scope).

137* **MCP servers** override by name: local > project > user. See [MCP scope](/en/mcp#scope-hierarchy-and-precedence).

138* **Hooks** merge: all registered hooks fire for their matching events regardless of source. See [hooks](/en/hooks).

139

140### Combine features

141

142Each extension solves a different problem: CLAUDE.md handles always-on context, skills handle on-demand knowledge and workflows, MCP handles external connections, subagents handle isolation, and hooks handle automation. Real setups combine them based on your workflow.

143

144For example, you might use CLAUDE.md for project conventions, a skill for your deployment workflow, MCP to connect to your database, and a hook to run linting after every edit. Each feature handles what it's best at.

145

146| Pattern | How it works | Example |

147| ---------------------- | -------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------- |

148| **Skill + MCP** | MCP provides the connection; a skill teaches Claude how to use it well | MCP connects to your database, a skill documents your schema and query patterns |

149| **Skill + Subagent** | A skill spawns subagents for parallel work | `/review` skill kicks off security, performance, and style subagents that work in isolated context |

150| **CLAUDE.md + Skills** | CLAUDE.md holds always-on rules; skills hold reference material loaded on demand | CLAUDE.md says "follow our API conventions," a skill contains the full API style guide |

151| **Hook + MCP** | A hook triggers external actions through MCP | Post-edit hook sends a Slack notification when Claude modifies critical files |

152

153## Understand context costs

154

155Every feature you add consumes some of Claude's context. Too much can fill up your context window, but it can also add noise that makes Claude less effective; skills may not trigger correctly, or Claude may lose track of your conventions. Understanding these trade-offs helps you build an effective setup.

156

157### Context cost by feature

158

159Each feature has a different loading strategy and context cost:

160

162| --------------- | ------------------------- | --------------------------------------------- | -------------------------------------------- |

168

169\*By default, skill descriptions load at session start so Claude can decide when to use them. Set `disable-model-invocation: true` in a skill's frontmatter to hide it from Claude entirely until you invoke it manually. This reduces context cost to zero for skills you only trigger yourself.

170

171### Understand how features load

172

173Each feature loads at different points in your session. The tabs below explain when each one loads and what goes into context.

174

175<img src="https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/context-loading.svg?fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=bd2e24b8e6a99b31ecfffb63f5b23bf5" alt="Context loading: CLAUDE.md and MCP load at session start and stay in every request. Skills load descriptions at start, full content on invocation. Subagents get isolated context. Hooks run externally." data-og-width="720" width="720" data-og-height="410" height="410" data-path="images/context-loading.svg" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/context-loading.svg?w=280&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=aebaadd1f484f285dd9cb4e0ea6d49b9 280w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/context-loading.svg?w=560&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=030c9b46126d750de315612560082727 560w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/context-loading.svg?w=840&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=6c73f8b0389da4f3190843140c810fe9 840w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/context-loading.svg?w=1100&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=9844c55d08d2c386672447f2e8518669 1100w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/context-loading.svg?w=1650&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=21a9522d0e4bd10ced146aab850ede76 1650w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/context-loading.svg?w=2500&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=d318525915aee1a1a6a4215cfaa61fb9 2500w" />

176

177<Tabs>

178 <Tab title="CLAUDE.md">

179 **When:** Session start

180

181 **What loads:** Full content of all CLAUDE.md files (managed, user, and project levels).

182

183 **Inheritance:** Claude reads CLAUDE.md files from your working directory up to the root, and discovers nested ones in subdirectories as it accesses those files. See [How Claude looks up memories](/en/memory#how-claude-looks-up-memories) for details.

184

185 <Tip>Keep CLAUDE.md under \~500 lines. Move reference material to skills, which load on-demand.</Tip>

186 </Tab>

187

188 <Tab title="Skills">

189 Skills are extra capabilities in Claude's toolkit. They can be reference material (like an API style guide) or invocable workflows you trigger with `/<name>` (like `/deploy`). Some are built-in; you can also create your own. Claude uses skills when appropriate, or you can invoke one directly.

190

191 **When:** Depends on the skill's configuration. By default, descriptions load at session start and full content loads when used. For user-only skills (`disable-model-invocation: true`), nothing loads until you invoke them.

192

193 **What loads:** For model-invocable skills, Claude sees names and descriptions in every request. When you invoke a skill with `/<name>` or Claude loads it automatically, the full content loads into your conversation.

194

195 **How Claude chooses skills:** Claude matches your task against skill descriptions to decide which are relevant. If descriptions are vague or overlap, Claude may load the wrong skill or miss one that would help. To tell Claude to use a specific skill, invoke it with `/<name>`. Skills with `disable-model-invocation: true` are invisible to Claude until you invoke them.

196

197 **Context cost:** Low until used. User-only skills have zero cost until invoked.

198

199 **In subagents:** Skills work differently in subagents. Instead of on-demand loading, skills passed to a subagent are fully preloaded into its context at launch. Subagents don't inherit skills from the main session; you must specify them explicitly.

200

201 <Tip>Use `disable-model-invocation: true` for skills with side effects. This saves context and ensures only you trigger them.</Tip>

202 </Tab>

203

204 <Tab title="MCP servers">

205 **When:** Session start.

206

207 **What loads:** All tool definitions and JSON schemas from connected servers.

208

209 **Context cost:** [Tool search](/en/mcp#scale-with-mcp-tool-search) (enabled by default) loads MCP tools up to 10% of context and defers the rest until needed.

210

211 **Reliability note:** MCP connections can fail silently mid-session. If a server disconnects, its tools disappear without warning. Claude may try to use a tool that no longer exists. If you notice Claude failing to use an MCP tool it previously could access, check the connection with `/mcp`.

212

213 <Tip>Run `/mcp` to see token costs per server. Disconnect servers you're not actively using.</Tip>

214 </Tab>

215

216 <Tab title="Subagents">

217 **When:** On demand, when you or Claude spawns one for a task.

218

219 **What loads:** Fresh, isolated context containing:

220

221 * The system prompt (shared with parent for cache efficiency)

222 * Full content of skills listed in the agent's `skills:` field

223 * CLAUDE.md and git status (inherited from parent)

224 * Whatever context the lead agent passes in the prompt

225

226 **Context cost:** Isolated from main session. Subagents don't inherit your conversation history or invoked skills.

227

228 <Tip>Use subagents for work that doesn't need your full conversation context. Their isolation prevents bloating your main session.</Tip>

229 </Tab>

230

231 <Tab title="Hooks">

232 **When:** On trigger. Hooks fire at specific lifecycle events like tool execution, session boundaries, prompt submission, permission requests, and compaction. See [Hooks](/en/hooks) for the full list.

233

234 **What loads:** Nothing by default. Hooks run as external scripts.

235

236 **Context cost:** Zero, unless the hook returns output that gets added as messages to your conversation.

237

238 <Tip>Hooks are ideal for side effects (linting, logging) that don't need to affect Claude's context.</Tip>

239 </Tab>

240</Tabs>

241

242## Learn more

243

244Each feature has its own guide with setup instructions, examples, and configuration options.

245

246<CardGroup cols={2}>

247 <Card title="CLAUDE.md" icon="file-lines" href="/en/memory">

248 Store project context, conventions, and instructions

249 </Card>

250

251 <Card title="Skills" icon="brain" href="/en/skills">

252 Give Claude domain expertise and reusable workflows

253 </Card>

254

255 <Card title="Subagents" icon="users" href="/en/sub-agents">

256 Offload work to isolated context

257 </Card>

258

259 <Card title="Agent teams" icon="network" href="/en/agent-teams">

260 Coordinate multiple sessions working in parallel

261 </Card>

262

263 <Card title="MCP" icon="plug" href="/en/mcp">

264 Connect Claude to external services

265 </Card>

266

267 <Card title="Hooks" icon="bolt" href="/en/hooks-guide">

268 Automate workflows with hooks

269 </Card>

270

271 <Card title="Plugins" icon="puzzle-piece" href="/en/plugins">

272 Bundle and share feature sets

273 </Card>

274

275 <Card title="Marketplaces" icon="store" href="/en/plugin-marketplaces">

276 Host and distribute plugin collections

277 </Card>

278</CardGroup>

github-actions.md +15 −15

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Claude Code GitHub Actions5# Claude Code GitHub Actions

2 6

3> Learn about integrating Claude Code into your development workflow with Claude Code GitHub Actions7> Learn about integrating Claude Code into your development workflow with Claude Code GitHub Actions

5Claude Code GitHub Actions brings AI-powered automation to your GitHub workflow. With a simple `@claude` mention in any PR or issue, Claude can analyze your code, create pull requests, implement features, and fix bugs - all while following your project's standards.9Claude Code GitHub Actions brings AI-powered automation to your GitHub workflow. With a simple `@claude` mention in any PR or issue, Claude can analyze your code, create pull requests, implement features, and fix bugs - all while following your project's standards.

6 10

7<Note>11<Note>

~~8 Claude Code GitHub Actions is built on top of the [Claude Code~~12 Claude Code GitHub Actions is built on top of the [Claude

~~9 SDK](https://docs.claude.com/en/docs/agent-sdk), which enables programmatic integration of~~13 Agent SDK](https://platform.claude.com/docs/en/agent-sdk/overview), which enables programmatic integration of

10 Claude Code into your applications. You can use the SDK to build custom14 Claude Code into your applications. You can use the SDK to build custom

11 automation workflows beyond GitHub Actions.15 automation workflows beyond GitHub Actions.

12</Note>16</Note>

13 17

14<Info>18<Info>

~~15 **Claude Opus 4.5 is now available.** Claude Code GitHub Actions default to Sonnet. To use Opus 4.5, configure the [model parameter](#breaking-changes-reference) to use `claude-opus-4-5-20251101`.~~19 **Claude Opus 4.6 is now available.** Claude Code GitHub Actions default to Sonnet. To use Opus 4.6, configure the [model parameter](#breaking-changes-reference) to use `claude-opus-4-6`.

16</Info>20</Info>

17 21

18## Why use Claude Code GitHub Actions?22## Why use Claude Code GitHub Actions?

90### Breaking Changes Reference94### Breaking Changes Reference

91 95

92| Old Beta Input | New v1.0 Input |96| Old Beta Input | New v1.0 Input |

~~93| --------------------- | -------------------------------- |~~97| --------------------- | ------------------------------------- |

94| `mode` | *(Removed - auto-detected)* |98| `mode` | *(Removed - auto-detected)* |

95| `direct_prompt` | `prompt` |99| `direct_prompt` | `prompt` |

124 prompt: "Review this PR for security issues"128 prompt: "Review this PR for security issues"

125 anthropic_api_key: ${{ secrets.ANTHROPIC_API_KEY }}129 anthropic_api_key: ${{ secrets.ANTHROPIC_API_KEY }}

126 claude_args: |130 claude_args: |

127 --system-prompt "Follow our coding standards"131 --append-system-prompt "Follow our coding standards"

128 --max-turns 10132 --max-turns 10

129 --model claude-sonnet-4-5-20250929133 --model claude-sonnet-4-5-20250929

130```134```

156 # Responds to @claude mentions in comments160 # Responds to @claude mentions in comments

157```161```

158 162

159### Using slash commands163### Using skills

160 164

161```yaml theme={null}165```yaml theme={null}

162name: Code Review166name: Code Review

189 with:193 with:

190 anthropic_api_key: ${{ secrets.ANTHROPIC_API_KEY }}194 anthropic_api_key: ${{ secrets.ANTHROPIC_API_KEY }}

191 prompt: "Generate a summary of yesterday's commits and open issues"195 prompt: "Generate a summary of yesterday's commits and open issues"

192 claude_args: "--model claude-opus-4-5-20251101"196 claude_args: "--model opus"

193```197```

194 198

195### Common use cases199### Common use cases

266Key features:270Key features:

267 271

268* **Unified prompt interface** - Use `prompt` for all instructions272* **Unified prompt interface** - Use `prompt` for all instructions

269* **Slash commands** - Pre-built prompts like `/review` or `/fix`273* **Commands** - Prebuilt prompts like `/review` or `/fix`

270* **CLI passthrough** - Any Claude Code CLI argument via `claude_args`274* **CLI passthrough** - Any Claude Code CLI argument via `claude_args`

271* **Flexible triggers** - Works with any GitHub event275* **Flexible triggers** - Works with any GitHub event

272 276

624The Claude Code Action v1 uses a simplified configuration:628The Claude Code Action v1 uses a simplified configuration:

625 629

627| ------------------- | ----------------------------------------------- | -------- |631| ------------------- | ------------------------------------------------------ | -------- |

628| `prompt` | Instructions for Claude (text or slash command) | No\* |632| `prompt` | Instructions for Claude (text or skill like `/review`) | No\* |

629| `claude_args` | CLI arguments passed to Claude Code | No |633| `claude_args` | CLI arguments passed to Claude Code | No |

630| `anthropic_api_key` | Claude API key | Yes\*\* |634| `anthropic_api_key` | Claude API key | Yes\*\* |

631| `github_token` | GitHub token for API access | No |635| `github_token` | GitHub token for API access | No |

6702. **Custom prompts**: Use the `prompt` parameter in the workflow file to provide workflow-specific instructions. This allows you to customize Claude's behavior for different workflows or tasks.6742. **Custom prompts**: Use the `prompt` parameter in the workflow file to provide workflow-specific instructions. This allows you to customize Claude's behavior for different workflows or tasks.

671 675

672Claude will follow these guidelines when creating PRs and responding to requests.676Claude will follow these guidelines when creating PRs and responding to requests.

~~673~~

~~674~~

~~675~~

676> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

gitlab-ci-cd.md +15 −15

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Claude Code GitLab CI/CD5# Claude Code GitLab CI/CD

2 6

3> Learn about integrating Claude Code into your development workflow with GitLab CI/CD7> Learn about integrating Claude Code into your development workflow with GitLab CI/CD

9</Info>13</Info>

10 14

11<Note>15<Note>

12 This integration is built on top of the [Claude Code CLI and SDK](https://docs.claude.com/en/docs/agent-sdk), enabling programmatic use of Claude in your CI/CD jobs and custom automation workflows.16 This integration is built on top of the [Claude Code CLI and Agent SDK](https://platform.claude.com/docs/en/agent-sdk/overview), enabling programmatic use of Claude in your CI/CD jobs and custom automation workflows.

13</Note>17</Note>

14 18

15## Why use Claude Code with GitLab?19## Why use Claude Code with GitLab?

77 before_script:81 before_script:

78 - apk update82 - apk update

79 - apk add --no-cache git curl bash83 - apk add --no-cache git curl bash

~~80 - npm install -g @anthropic-ai/claude-code~~84 - curl -fsSL https://claude.ai/install.sh | bash

81 script:85 script:

82 # Optional: start a GitLab MCP server if your setup provides one86 # Optional: start a GitLab MCP server if your setup provides one

83 - /bin/gitlab-mcp-server || true87 - /bin/gitlab-mcp-server || true

87 claude91 claude

88 -p "${AI_FLOW_INPUT:-'Review this MR and implement the requested changes'}"92 -p "${AI_FLOW_INPUT:-'Review this MR and implement the requested changes'}"

89 --permission-mode acceptEdits93 --permission-mode acceptEdits

~~90 --allowedTools "Bash(*) Read(*) Edit(*) Write(*) mcp__gitlab"~~94 --allowedTools "Bash Read Edit Write mcp__gitlab"

91 --debug95 --debug

92```96```

93 97

255 before_script:259 before_script:

256 - apk update260 - apk update

257 - apk add --no-cache git curl bash261 - apk add --no-cache git curl bash

258 - npm install -g @anthropic-ai/claude-code262 - curl -fsSL https://claude.ai/install.sh | bash

259 script:263 script:

260 - /bin/gitlab-mcp-server || true264 - /bin/gitlab-mcp-server || true

261 - >265 - >

262 claude266 claude

263 -p "${AI_FLOW_INPUT:-'Summarize recent changes and suggest improvements'}"267 -p "${AI_FLOW_INPUT:-'Summarize recent changes and suggest improvements'}"

264 --permission-mode acceptEdits268 --permission-mode acceptEdits

265 --allowedTools "Bash(*) Read(*) Edit(*) Write(*) mcp__gitlab"269 --allowedTools "Bash Read Edit Write mcp__gitlab"

266 --debug270 --debug

267 # Claude Code will use ANTHROPIC_API_KEY from CI/CD variables271 # Claude Code will use ANTHROPIC_API_KEY from CI/CD variables

268```272```

289 before_script:293 before_script:

290 - apk add --no-cache bash curl jq git python3 py3-pip294 - apk add --no-cache bash curl jq git python3 py3-pip

291 - pip install --no-cache-dir awscli295 - pip install --no-cache-dir awscli

292 - npm install -g @anthropic-ai/claude-code296 - curl -fsSL https://claude.ai/install.sh | bash

293 # Exchange GitLab OIDC token for AWS credentials297 # Exchange GitLab OIDC token for AWS credentials

294 - export AWS_WEB_IDENTITY_TOKEN_FILE="${CI_JOB_JWT_FILE:-/tmp/oidc_token}"298 - export AWS_WEB_IDENTITY_TOKEN_FILE="${CI_JOB_JWT_FILE:-/tmp/oidc_token}"

295 - if [ -n "${CI_JOB_JWT_V2}" ]; then printf "%s" "$CI_JOB_JWT_V2" > "$AWS_WEB_IDENTITY_TOKEN_FILE"; fi299 - if [ -n "${CI_JOB_JWT_V2}" ]; then printf "%s" "$CI_JOB_JWT_V2" > "$AWS_WEB_IDENTITY_TOKEN_FILE"; fi

308 claude312 claude

309 -p "${AI_FLOW_INPUT:-'Implement the requested changes and open an MR'}"313 -p "${AI_FLOW_INPUT:-'Implement the requested changes and open an MR'}"

310 --permission-mode acceptEdits314 --permission-mode acceptEdits

311 --allowedTools "Bash(*) Read(*) Edit(*) Write(*) mcp__gitlab"315 --allowedTools "Bash Read Edit Write mcp__gitlab"

312 --debug316 --debug

313 variables:317 variables:

314 AWS_REGION: "us-west-2"318 AWS_REGION: "us-west-2"

339 rules:343 rules:

340 - if: '$CI_PIPELINE_SOURCE == "web"'344 - if: '$CI_PIPELINE_SOURCE == "web"'

341 before_script:345 before_script:

342 - apt-get update && apt-get install -y git nodejs npm && apt-get clean346 - apt-get update && apt-get install -y git && apt-get clean

343 - npm install -g @anthropic-ai/claude-code347 - curl -fsSL https://claude.ai/install.sh | bash

344 # Authenticate to Google Cloud via WIF (no downloaded keys)348 # Authenticate to Google Cloud via WIF (no downloaded keys)

345 - >349 - >

346 gcloud auth login --cred-file=<(cat <<EOF350 gcloud auth login --cred-file=<(cat <<EOF

361 claude365 claude

362 -p "${AI_FLOW_INPUT:-'Review and update code as requested'}"366 -p "${AI_FLOW_INPUT:-'Review and update code as requested'}"

363 --permission-mode acceptEdits367 --permission-mode acceptEdits

364 --allowedTools "Bash(*) Read(*) Edit(*) Write(*) mcp__gitlab"368 --allowedTools "Bash Read Edit Write mcp__gitlab"

365 --debug369 --debug

366 variables:370 variables:

367 CLOUD_ML_REGION: "us-east5"371 CLOUD_ML_REGION: "us-east5"

404* **API costs**:408* **API costs**:

405 * Each Claude interaction consumes tokens based on prompt and response size409 * Each Claude interaction consumes tokens based on prompt and response size

406 * Token usage varies by task complexity and codebase size410 * Token usage varies by task complexity and codebase size

407 * See [Anthropic pricing](https://docs.claude.com/en/docs/about-claude/pricing) for details411 * See [Anthropic pricing](https://platform.claude.com/docs/en/about-claude/pricing) for details

408 412

409* **Cost optimization tips**:413* **Cost optimization tips**:

410 * Use specific `@claude` commands to reduce unnecessary turns414 * Use specific `@claude` commands to reduce unnecessary turns

460 464

4611. **CLAUDE.md**: Define coding standards, security requirements, and project conventions. Claude reads this during runs and follows your rules.4651. **CLAUDE.md**: Define coding standards, security requirements, and project conventions. Claude reads this during runs and follows your rules.

4622. **Custom prompts**: Pass task-specific instructions via `prompt`/`prompt_file` in the job. Use different prompts for different jobs (for example, review, implement, refactor).4662. **Custom prompts**: Pass task-specific instructions via `prompt`/`prompt_file` in the job. Use different prompts for different jobs (for example, review, implement, refactor).

~~463~~

~~464~~

~~465~~

466> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

google-vertex-ai.md +7 −7

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Claude Code on Google Vertex AI5# Claude Code on Google Vertex AI

2 6

3> Learn about configuring Claude Code through Google Vertex AI, including setup, IAM configuration, and troubleshooting.7> Learn about configuring Claude Code through Google Vertex AI, including setup, IAM configuration, and troubleshooting.

82```86```

83 87

84<Note>88<Note>

85 [Prompt caching](https://docs.claude.com/en/docs/build-with-claude/prompt-caching) is automatically supported when you specify the `cache_control` ephemeral flag. To disable it, set `DISABLE_PROMPT_CACHING=1`. For heightened rate limits, contact Google Cloud support.89 [Prompt caching](https://platform.claude.com/docs/en/build-with-claude/prompt-caching) is automatically supported when you specify the `cache_control` ephemeral flag. To disable it, set `DISABLE_PROMPT_CACHING=1`. For heightened rate limits, contact Google Cloud support.

86</Note>90</Note>

87 91

88<Note>92<Note>

105To customize models:109To customize models:

106 110

107```bash theme={null}111```bash theme={null}

108export ANTHROPIC_MODEL='claude-opus-4-1@20250805'112export ANTHROPIC_MODEL='claude-opus-4-6'

109export ANTHROPIC_SMALL_FAST_MODEL='claude-haiku-4-5@20251001'113export ANTHROPIC_SMALL_FAST_MODEL='claude-haiku-4-5@20251001'

110```114```

111 115

127 131

128## 1M token context window132## 1M token context window

129 133

130Claude Sonnet 4 and Sonnet 4.5 support the [1M token context window](https://docs.claude.com/en/docs/build-with-claude/context-windows#1m-token-context-window) on Vertex AI.134Claude Sonnet 4 and Sonnet 4.5 support the [1M token context window](https://platform.claude.com/docs/en/build-with-claude/context-windows#1m-token-context-window) on Vertex AI.

131 135

132<Note>136<Note>

133 The 1M token context window is currently in beta. To use the extended context window, include the `context-1m-2025-08-07` beta header in your Vertex AI requests.137 The 1M token context window is currently in beta. To use the extended context window, include the `context-1m-2025-08-07` beta header in your Vertex AI requests.

157* [Vertex AI documentation](https://cloud.google.com/vertex-ai/docs)161* [Vertex AI documentation](https://cloud.google.com/vertex-ai/docs)

158* [Vertex AI pricing](https://cloud.google.com/vertex-ai/pricing)162* [Vertex AI pricing](https://cloud.google.com/vertex-ai/pricing)

159* [Vertex AI quotas and limits](https://cloud.google.com/vertex-ai/docs/quotas)163* [Vertex AI quotas and limits](https://cloud.google.com/vertex-ai/docs/quotas)

~~160~~

~~161~~

~~162~~

163> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

headless.md +104 −141

Details

~~1# Headless mode~~1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

2 4

~~3> Run Claude Code programmatically without interactive UI~~5# Run Claude Code programmatically

4 6

~~5## Overview~~7> Use the Agent SDK to run Claude Code programmatically from the CLI, Python, or TypeScript.

6 8

~~7The headless mode allows you to run Claude Code programmatically from command line scripts and automation tools without any interactive UI.~~9The [Agent SDK](https://platform.claude.com/docs/en/agent-sdk/overview) gives you the same tools, agent loop, and context management that power Claude Code. It's available as a CLI for scripts and CI/CD, or as [Python](https://platform.claude.com/docs/en/agent-sdk/python) and [TypeScript](https://platform.claude.com/docs/en/agent-sdk/typescript) packages for full programmatic control.

8 10

~~9## Basic usage~~11<Note>

12 The CLI was previously called "headless mode." The `-p` flag and all CLI options work the same way.

13</Note>

10 14

~~11The primary command-line interface to Claude Code is the `claude` command. Use the `--print` (or `-p`) flag to run in non-interactive mode and print the final result:~~15To run Claude Code programmatically from the CLI, pass `-p` with your prompt and any [CLI options](/en/cli-reference):

12 16

13```bash theme={null}17```bash theme={null}

~~14claude -p "Stage my changes and write a set of commits for them" \~~18claude -p "Find and fix the bug in auth.py" --allowedTools "Read,Edit,Bash"

~~15 --allowedTools "Bash,Read" \~~

~~16 --permission-mode acceptEdits~~

17```19```

18 20

~~19## Configuration Options~~21This page covers using the Agent SDK via the CLI (`claude -p`). For the Python and TypeScript SDK packages with structured outputs, tool approval callbacks, and native message objects, see the [full Agent SDK documentation](https://platform.claude.com/docs/en/agent-sdk/overview).

~~21Headless mode leverages all the CLI options available in Claude Code. Here are the key ones for automation and scripting:~~

22 22

23| Flag | Description | Example |23## Basic usage

24| :------------------------- | :---------------------------------------------------------------------------------------------- | :------------------------------------------------------------------------------------------------------------------------ |

25| `--print`, `-p` | Run in non-interactive mode | `claude -p "query"` |

26| `--output-format` | Specify output format (`text`, `json`, `stream-json`) | `claude -p --output-format json` |

27| `--resume`, `-r` | Resume a conversation by session ID | `claude --resume abc123` |

28| `--continue`, `-c` | Continue the most recent conversation | `claude --continue` |

29| `--verbose` | Enable verbose logging | `claude --verbose` |

30| `--append-system-prompt` | Append to system prompt (only with `--print`) | `claude --append-system-prompt "Custom instruction"` |

31| `--allowedTools` | Tools that execute without prompting for permission (use `--tools` to restrict available tools) | `claude --allowedTools mcp__slack mcp__filesystem`<br /><br />`claude --allowedTools "Bash(npm install),mcp__filesystem"` |

32| `--disallowedTools` | Tools removed from the model's context (cannot be used) | `claude --disallowedTools mcp__splunk mcp__github`<br /><br />`claude --disallowedTools "Bash(git commit),mcp__github"` |

33| `--mcp-config` | Load MCP servers from a JSON file | `claude --mcp-config servers.json` |

34| `--permission-prompt-tool` | MCP tool for handling permission prompts (only with `--print`) | `claude --permission-prompt-tool mcp__auth__prompt` |

35 24

~~36For a complete list of CLI options and features, see the [CLI reference](/en/cli-reference) documentation.~~25Add the `-p` (or `--print`) flag to any `claude` command to run it non-interactively. All [CLI options](/en/cli-reference) work with `-p`, including:

37 26

~~38## Multi-turn conversations~~27* `--continue` for [continuing conversations](#continue-conversations)

28* `--allowedTools` for [auto-approving tools](#auto-approve-tools)

29* `--output-format` for [structured output](#get-structured-output)

39 30

~~40For multi-turn conversations, you can resume conversations or continue from the most recent session:~~31This example asks Claude a question about your codebase and prints the response:

41 32

42```bash theme={null}33```bash theme={null}

~~43# Continue the most recent conversation~~34claude -p "What does the auth module do?"

~~44claude --continue "Now refactor this for better performance"~~35```

45 36

~~46# Resume a specific conversation by session ID~~37## Examples

~~47claude --resume 550e8400-e29b-41d4-a716-446655440000 "Update the tests"~~

48 38

~~49# Resume in non-interactive mode~~39These examples highlight common CLI patterns.

~~50claude --resume 550e8400-e29b-41d4-a716-446655440000 "Fix all linting issues" --no-interactive~~40

~~51```~~41### Get structured output

43Use `--output-format` to control how responses are returned:

52 44

~~53## Output Formats~~45* `text` (default): plain text output

46* `json`: structured JSON with result, session ID, and metadata

47* `stream-json`: newline-delimited JSON for real-time streaming

54 48

~~55### Text Output (Default)~~49This example returns a project summary as JSON with session metadata, with the text result in the `result` field:

56 50

57```bash theme={null}51```bash theme={null}

~~58claude -p "Explain file src/components/Header.tsx"~~52claude -p "Summarize this project" --output-format json

~~59# Output: This is a React component showing...~~

60```53```

61 54

~~62### JSON Output~~55To get output conforming to a specific schema, use `--output-format json` with `--json-schema` and a [JSON Schema](https://json-schema.org/) definition. The response includes metadata about the request (session ID, usage, etc.) with the structured output in the `structured_output` field.

63 56

~~64Returns structured data including metadata:~~57This example extracts function names and returns them as an array of strings:

65 58

66```bash theme={null}59```bash theme={null}

~~67claude -p "How does the data layer work?" --output-format json~~60claude -p "Extract the main function names from auth.py" \

61 --output-format json \

62 --json-schema '{"type":"object","properties":{"functions":{"type":"array","items":{"type":"string"}}},"required":["functions"]}'

68```63```

69 64

~~70Response format:~~65<Tip>

71 66 Use a tool like [jq](https://jqlang.github.io/jq/) to parse the response and extract specific fields:

~~72```json theme={null}~~

~~73{~~

~~74 "type": "result",~~

~~75 "subtype": "success",~~

~~76 "total_cost_usd": 0.003,~~

~~77 "is_error": false,~~

~~78 "duration_ms": 1234,~~

~~79 "duration_api_ms": 800,~~

~~80 "num_turns": 6,~~

~~81 "result": "The response text here...",~~

~~82 "session_id": "abc123"~~

~~83}~~

~~84```~~

85 67

~~86### Streaming JSON Output~~68 ```bash theme={null}

69 # Extract the text result

70 claude -p "Summarize this project" --output-format json | jq -r '.result'

87 71

~~88Streams each message as it is received:~~72 # Extract structured output

73 claude -p "Extract function names from auth.py" \

74 --output-format json \

75 --json-schema '{"type":"object","properties":{"functions":{"type":"array","items":{"type":"string"}}},"required":["functions"]}' \

76 | jq '.structured_output'

77 ```

78</Tip>

89 79

~~90```bash theme={null}~~80### Stream responses

~~91claude -p "Build an application" --output-format stream-json~~

~~92```~~

93 81

94Each conversation begins with an initial `init` system message, followed by a list of user and assistant messages, followed by a final `result` system message with stats. Each message is emitted as a separate JSON object.82Use `--output-format stream-json` with `--verbose` and `--include-partial-messages` to receive tokens as they're generated. Each line is a JSON object representing an event:

95 83

~~96## Input Formats~~84```bash theme={null}

85claude -p "Explain recursion" --output-format stream-json --verbose --include-partial-messages

86```

97 87

~~98### Text Input (Default)~~88The following example uses [jq](https://jqlang.github.io/jq/) to filter for text deltas and display just the streaming text. The `-r` flag outputs raw strings (no quotes) and `-j` joins without newlines so tokens stream continuously:

99 89

100```bash theme={null}90```bash theme={null}

101# Direct argument91claude -p "Write a poem" --output-format stream-json --verbose --include-partial-messages | \

102claude -p "Explain this code"92 jq -rj 'select(.type == "stream_event" and .event.delta.type? == "text_delta") | .event.delta.text'

~~103~~

104# From stdin

105echo "Explain this code" | claude -p

106```93```

107 94

108### Streaming JSON Input95For programmatic streaming with callbacks and message objects, see [Stream responses in real-time](https://platform.claude.com/docs/en/agent-sdk/streaming-output) in the Agent SDK documentation.

109 96

110A stream of messages provided via `stdin` where each message represents a user turn. This allows multiple turns of a conversation without re-launching the `claude` binary and allows providing guidance to the model while it is processing a request.97### Auto-approve tools

111 98

112Each message is a JSON 'User message' object, following the same format as the output message schema. Messages are formatted using the [`jsonl`](https://jsonlines.org/) format where each line of input is a complete JSON object. Streaming JSON input requires `-p` and `--output-format stream-json`.99Use `--allowedTools` to let Claude use certain tools without prompting. This example runs a test suite and fixes failures, allowing Claude to execute Bash commands and read/edit files without asking for permission:

113 100

114```bash theme={null}101```bash theme={null}

115echo '{"type":"user","message":{"role":"user","content":[{"type":"text","text":"Explain this code"}]}}' | claude -p --output-format=stream-json --input-format=stream-json --verbose102claude -p "Run the test suite and fix any failures" \

103 --allowedTools "Bash,Read,Edit"

116```104```

117 105

118## Agent Integration Examples106### Create a commit

119 107

120### SRE Incident Response Bot108This example reviews staged changes and creates a commit with an appropriate message:

121 109

122```bash theme={null}110```bash theme={null}

123#!/bin/bash111claude -p "Look at my staged changes and create an appropriate commit" \

~~124~~ 112 --allowedTools "Bash(git diff *),Bash(git log *),Bash(git status *),Bash(git commit *)"

125# Automated incident response agent

126investigate_incident() {

127 local incident_description="$1"

128 local severity="${2:-medium}"

~~129~~

130 claude -p "Incident: $incident_description (Severity: $severity)" \

131 --append-system-prompt "You are an SRE expert. Diagnose the issue, assess impact, and provide immediate action items." \

132 --output-format json \

133 --allowedTools "Bash,Read,WebSearch,mcp__datadog" \

134 --mcp-config monitoring-tools.json

135}

~~136~~

137# Usage

138investigate_incident "Payment API returning 500 errors" "high"

139```113```

140 114

141### Automated Security Review115The `--allowedTools` flag uses [permission rule syntax](/en/settings#permission-rule-syntax). The trailing ` *` enables prefix matching, so `Bash(git diff *)` allows any command starting with `git diff`. The space before `*` is important: without it, `Bash(git diff*)` would also match `git diff-index`.

142 116

143```bash theme={null}117<Note>

144# Security audit agent for pull requests118 User-invoked [skills](/en/skills) like `/commit` and [built-in commands](/en/interactive-mode#built-in-commands) are only available in interactive mode. In `-p` mode, describe the task you want to accomplish instead.

145audit_pr() {119</Note>

146 local pr_number="$1"

~~147~~

148 gh pr diff "$pr_number" | claude -p \

149 --append-system-prompt "You are a security engineer. Review this PR for vulnerabilities, insecure patterns, and compliance issues." \

150 --output-format json \

151 --allowedTools "Read,Grep,WebSearch"

152}

153 120

154# Usage and save to file121### Customize the system prompt

155audit_pr 123 > security-report.json

156```

157 122

158### Multi-turn Legal Assistant123Use `--append-system-prompt` to add instructions while keeping Claude Code's default behavior. This example pipes a PR diff to Claude and instructs it to review for security vulnerabilities:

159 124

160```bash theme={null}125```bash theme={null}

161# Legal document review with session persistence126gh pr diff "$1" | claude -p \

162session_id=$(claude -p "Start legal review session" --output-format json | jq -r '.session_id')127 --append-system-prompt "You are a security engineer. Review for vulnerabilities." \

~~163~~ 128 --output-format json

164# Review contract in multiple steps

165claude -p --resume "$session_id" "Review contract.pdf for liability clauses"

166claude -p --resume "$session_id" "Check compliance with GDPR requirements"

167claude -p --resume "$session_id" "Generate executive summary of risks"

168```129```

169 130

170## Best Practices131See [system prompt flags](/en/cli-reference#system-prompt-flags) for more options including `--system-prompt` to fully replace the default prompt.

~~171~~

172* **Use JSON output format** for programmatic parsing of responses:

~~173~~

174 ```bash theme={null}

175 # Parse JSON response with jq

176 result=$(claude -p "Generate code" --output-format json)

177 code=$(echo "$result" | jq -r '.result')

178 cost=$(echo "$result" | jq -r '.cost_usd')

179 ```

180 132

181* **Handle errors gracefully** - check exit codes and stderr:133### Continue conversations

182 134

183 ```bash theme={null}135Use `--continue` to continue the most recent conversation, or `--resume` with a session ID to continue a specific conversation. This example runs a review, then sends follow-up prompts:

184 if ! claude -p "$prompt" 2>error.log; then

185 echo "Error occurred:" >&2

186 cat error.log >&2

187 exit 1

188 fi

189 ```

190 136

191* **Use session management** for maintaining context in multi-turn conversations137```bash theme={null}

138# First request

139claude -p "Review this codebase for performance issues"

192 140

193* **Consider timeouts** for long-running operations:141# Continue the most recent conversation

142claude -p "Now focus on the database queries" --continue

143claude -p "Generate a summary of all issues found" --continue

144```

194 145

195 ```bash theme={null}146If you're running multiple conversations, capture the session ID to resume a specific one:

196 timeout 300 claude -p "$complex_prompt" || echo "Timed out after 5 minutes"

197 ```

198 147

199* **Respect rate limits** when making multiple requests by adding delays between calls148```bash theme={null}

149session_id=$(claude -p "Start a review" --output-format json | jq -r '.session_id')

150claude -p "Continue that review" --resume "$session_id"

151```

200 152

201## Related Resources153## Next steps

202 154

203* [CLI usage and controls](/en/cli-reference) - Complete CLI documentation155<CardGroup cols={2}>

204* [Common workflows](/en/common-workflows) - Step-by-step guides for common use cases156 <Card title="Agent SDK quickstart" icon="play" href="https://platform.claude.com/docs/en/agent-sdk/quickstart">

157 Build your first agent with Python or TypeScript

158 </Card>

205 159

160 <Card title="CLI reference" icon="terminal" href="/en/cli-reference">

161 Explore all CLI flags and options

162 </Card>

206 163

164 <Card title="GitHub Actions" icon="github" href="/en/github-actions">

165 Use the Agent SDK in GitHub workflows

166 </Card>

207 167

208> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt168 <Card title="GitLab CI/CD" icon="gitlab" href="/en/gitlab-ci-cd">

169 Use the Agent SDK in GitLab pipelines

170 </Card>

171</CardGroup>

hooks.md +1144 −723

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Hooks reference5# Hooks reference

2 6

~~3> This page provides reference documentation for implementing hooks in Claude Code.~~7> Reference for Claude Code hook events, configuration schema, JSON input/output formats, exit codes, async hooks, prompt hooks, and MCP tool hooks.

4 8

5<Tip>9<Tip>

~~6 For a quickstart guide with examples, see [Get started with Claude Code hooks](/en/hooks-guide).~~10 For a quickstart guide with examples, see [Automate workflows with hooks](/en/hooks-guide).

7</Tip>11</Tip>

8 12

~~9## Configuration~~13Hooks are user-defined shell commands or LLM prompts that execute automatically at specific points in Claude Code's lifecycle. Use this reference to look up event schemas, configuration options, JSON input/output formats, and advanced features like async hooks and MCP tool hooks. If you're setting up hooks for the first time, start with the [guide](/en/hooks-guide) instead.

15## Hook lifecycle

17Hooks fire at specific points during a Claude Code session. When an event fires and a matcher matches, Claude Code passes JSON context about the event to your hook handler. For command hooks, this arrives on stdin. Your handler can then inspect the input, take action, and optionally return a decision. Some events fire once per session, while others fire repeatedly inside the agentic loop:

10 18

~~11Claude Code hooks are configured in your [settings files](/en/settings):~~19<div style={{maxWidth: "500px", margin: "0 auto"}}>

20 <Frame>

21 <img src="https://mintcdn.com/claude-code/tpQvD9DKENFo4zX_/images/hooks-lifecycle.svg?fit=max&auto=format&n=tpQvD9DKENFo4zX_&q=85&s=7a351ea1cc3d5da7a2176bf51196bc1a" alt="Hook lifecycle diagram showing the sequence of hooks from SessionStart through the agentic loop to SessionEnd" data-og-width="520" width="520" data-og-height="960" height="960" data-path="images/hooks-lifecycle.svg" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/tpQvD9DKENFo4zX_/images/hooks-lifecycle.svg?w=280&fit=max&auto=format&n=tpQvD9DKENFo4zX_&q=85&s=8f32c67d025f0a318d5ed10a4f8ff2e6 280w, https://mintcdn.com/claude-code/tpQvD9DKENFo4zX_/images/hooks-lifecycle.svg?w=560&fit=max&auto=format&n=tpQvD9DKENFo4zX_&q=85&s=896fc424e39ff8d590720331a77e3d80 560w, https://mintcdn.com/claude-code/tpQvD9DKENFo4zX_/images/hooks-lifecycle.svg?w=840&fit=max&auto=format&n=tpQvD9DKENFo4zX_&q=85&s=a1c1c9739cde965e1eade843cee567c5 840w, https://mintcdn.com/claude-code/tpQvD9DKENFo4zX_/images/hooks-lifecycle.svg?w=1100&fit=max&auto=format&n=tpQvD9DKENFo4zX_&q=85&s=5bb083988de020e7d568e8dd8f1422fc 1100w, https://mintcdn.com/claude-code/tpQvD9DKENFo4zX_/images/hooks-lifecycle.svg?w=1650&fit=max&auto=format&n=tpQvD9DKENFo4zX_&q=85&s=343e9883c1e3172f08096c352aa46f12 1650w, https://mintcdn.com/claude-code/tpQvD9DKENFo4zX_/images/hooks-lifecycle.svg?w=2500&fit=max&auto=format&n=tpQvD9DKENFo4zX_&q=85&s=4de37b29de0f6df8b0c3e937a76c3bc6 2500w" />

22 </Frame>

23</div>

12 24

~~13* `~/.claude/settings.json` - User settings~~25The table below summarizes when each event fires. The [Hook events](#hook-events) section documents the full input schema and decision control options for each one.

~~14* `.claude/settings.json` - Project settings~~

~~15* `.claude/settings.local.json` - Local project settings (not committed)~~

~~16* Enterprise managed policy settings~~

17 26

~~18### Structure~~27| Event | When it fires |

28| :------------------- | :----------------------------------------------------------------- |

29| `SessionStart` | When a session begins or resumes |

30| `UserPromptSubmit` | When you submit a prompt, before Claude processes it |

31| `PreToolUse` | Before a tool call executes. Can block it |

32| `PermissionRequest` | When a permission dialog appears |

33| `PostToolUse` | After a tool call succeeds |

34| `PostToolUseFailure` | After a tool call fails |

35| `Notification` | When Claude Code sends a notification |

36| `SubagentStart` | When a subagent is spawned |

37| `SubagentStop` | When a subagent finishes |

38| `Stop` | When Claude finishes responding |

39| `TeammateIdle` | When an [agent team](/en/agent-teams) teammate is about to go idle |

40| `TaskCompleted` | When a task is being marked as completed |

41| `PreCompact` | Before context compaction |

42| `SessionEnd` | When a session terminates |

19 43

~~20Hooks are organized by matchers, where each matcher can have multiple hooks:~~44### How a hook resolves

46To see how these pieces fit together, consider this `PreToolUse` hook that blocks destructive shell commands. The hook runs `block-rm.sh` before every Bash tool call:

21 47

22```json theme={null}48```json theme={null}

23{49{

24 "hooks": {50 "hooks": {

~~25 "EventName": [~~51 "PreToolUse": [

26 {52 {

~~27 "matcher": "ToolPattern",~~53 "matcher": "Bash",

28 "hooks": [54 "hooks": [

29 {55 {

30 "type": "command",56 "type": "command",

~~31 "command": "your-command-here"~~57 "command": ".claude/hooks/block-rm.sh"

32 }58 }

33 ]59 ]

34 }60 }

37}63}

38```64```

39 65

~~40* **matcher**: Pattern to match tool names, case-sensitive (only applicable for~~66The script reads the JSON input from stdin, extracts the command, and returns a `permissionDecision` of `"deny"` if it contains `rm -rf`:

~~41 `PreToolUse`, `PermissionRequest`, and `PostToolUse`)~~

~~42 * Simple strings match exactly: `Write` matches only the Write tool~~

~~43 * Supports regex: `Edit|Write` or `Notebook.*`~~

~~44 * Use `*` to match all tools. You can also use empty string (`""`) or leave~~

~~45 `matcher` blank.~~

~~46* **hooks**: Array of hooks to execute when the pattern matches~~

~~47 * `type`: Hook execution type - `"command"` for bash commands or `"prompt"` for LLM-based evaluation~~

~~48 * `command`: (For `type: "command"`) The bash command to execute (can use `$CLAUDE_PROJECT_DIR` environment variable)~~

~~49 * `prompt`: (For `type: "prompt"`) The prompt to send to the LLM for evaluation~~

~~50 * `timeout`: (Optional) How long a hook should run, in seconds, before canceling that specific hook~~

~~52For events like `UserPromptSubmit`, `Stop`, and `SubagentStop`~~

~~53that don't use matchers, you can omit the matcher field:~~

54 67

~~55```json theme={null}~~68```bash theme={null}

~~56{~~69#!/bin/bash

~~57 "hooks": {~~70# .claude/hooks/block-rm.sh

~~58 "UserPromptSubmit": [~~71COMMAND=$(jq -r '.tool_input.command')

~~59 {~~72

~~60 "hooks": [~~73if echo "$COMMAND" | grep -q 'rm -rf'; then

~~61 {~~74 jq -n '{

~~62 "type": "command",~~75 hookSpecificOutput: {

~~63 "command": "/path/to/prompt-validator.py"~~76 hookEventName: "PreToolUse",

~~64 }~~77 permissionDecision: "deny",

~~65 ]~~78 permissionDecisionReason: "Destructive command blocked by hook"

~~66 }~~

~~67 ]~~

68 }79 }

~~69}~~80 }'

81else

82 exit 0 # allow the command

83fi

70```84```

71 85

~~72### Project-Specific Hook Scripts~~86Now suppose Claude Code decides to run `Bash "rm -rf /tmp/build"`. Here's what happens:

73 87

~~74You can use the environment variable `CLAUDE_PROJECT_DIR` (only available when~~88<Frame>

~~75Claude Code spawns the hook command) to reference scripts stored in your project,~~89 <img src="https://mintcdn.com/claude-code/s7NM0vfd_wres2nf/images/hook-resolution.svg?fit=max&auto=format&n=s7NM0vfd_wres2nf&q=85&s=7c13f51ffcbc37d22a593b27e2f2de72" alt="Hook resolution flow: PreToolUse event fires, matcher checks for Bash match, hook handler runs, result returns to Claude Code" data-og-width="780" width="780" data-og-height="290" height="290" data-path="images/hook-resolution.svg" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/s7NM0vfd_wres2nf/images/hook-resolution.svg?w=280&fit=max&auto=format&n=s7NM0vfd_wres2nf&q=85&s=36a39a07e8bc1995dcb4639e09846905 280w, https://mintcdn.com/claude-code/s7NM0vfd_wres2nf/images/hook-resolution.svg?w=560&fit=max&auto=format&n=s7NM0vfd_wres2nf&q=85&s=6568d90c596c7605bbac2c325b0a0c86 560w, https://mintcdn.com/claude-code/s7NM0vfd_wres2nf/images/hook-resolution.svg?w=840&fit=max&auto=format&n=s7NM0vfd_wres2nf&q=85&s=255a6f68b9475a0e41dbde7b88002dad 840w, https://mintcdn.com/claude-code/s7NM0vfd_wres2nf/images/hook-resolution.svg?w=1100&fit=max&auto=format&n=s7NM0vfd_wres2nf&q=85&s=dcecf8d5edc88cd2bc49deb006d5760d 1100w, https://mintcdn.com/claude-code/s7NM0vfd_wres2nf/images/hook-resolution.svg?w=1650&fit=max&auto=format&n=s7NM0vfd_wres2nf&q=85&s=04fe51bf69ae375e9fd517f18674e35f 1650w, https://mintcdn.com/claude-code/s7NM0vfd_wres2nf/images/hook-resolution.svg?w=2500&fit=max&auto=format&n=s7NM0vfd_wres2nf&q=85&s=b1b76e0b77fddb5c7fa7bf302dacd80b 2500w" />

~~76ensuring they work regardless of Claude's current directory:~~90</Frame>

77 91

~~78```json theme={null}~~92<Steps>

~~79{~~93 <Step title="Event fires">

~~80 "hooks": {~~94 The `PreToolUse` event fires. Claude Code sends the tool input as JSON on stdin to the hook:

~~81 "PostToolUse": [~~95

~~82 {~~96 ```json theme={null}

~~83 "matcher": "Write|Edit",~~97 { "tool_name": "Bash", "tool_input": { "command": "rm -rf /tmp/build" }, ... }

~~84 "hooks": [~~98 ```

99 </Step>

100

101 <Step title="Matcher checks">

102 The matcher `"Bash"` matches the tool name, so `block-rm.sh` runs. If you omit the matcher or use `"*"`, the hook runs on every occurrence of the event. Hooks only skip when a matcher is defined and doesn't match.

103 </Step>

104

105 <Step title="Hook handler runs">

106 The script extracts `"rm -rf /tmp/build"` from the input and finds `rm -rf`, so it prints a decision to stdout:

107

108 ```json theme={null}

85 {109 {

~~86 "type": "command",~~110 "hookSpecificOutput": {

~~87 "command": "\"$CLAUDE_PROJECT_DIR\"/.claude/hooks/check-style.sh"~~111 "hookEventName": "PreToolUse",

~~88 }~~112 "permissionDecision": "deny",

~~89 ]~~113 "permissionDecisionReason": "Destructive command blocked by hook"

90 }114 }

~~91 ]~~

92 }115 }

~~93}~~116 ```

~~94```~~

95 117

~~96### Plugin hooks~~118 If the command had been safe (like `npm test`), the script would hit `exit 0` instead, which tells Claude Code to allow the tool call with no further action.

119 </Step>

97 120

~~98[Plugins](/en/plugins) can provide hooks that integrate seamlessly with your user and project hooks. Plugin hooks are automatically merged with your configuration when plugins are enabled.~~121 <Step title="Claude Code acts on the result">

122 Claude Code reads the JSON decision, blocks the tool call, and shows Claude the reason.

123 </Step>

124</Steps>

125

126The [Configuration](#configuration) section below documents the full schema, and each [hook event](#hook-events) section documents what input your command receives and what output it can return.

127

128## Configuration

99 129

100**How plugin hooks work**:130Hooks are defined in JSON settings files. The configuration has three levels of nesting:

101 131

102* Plugin hooks are defined in the plugin's `hooks/hooks.json` file or in a file given by a custom path to the `hooks` field.1321. Choose a [hook event](#hook-events) to respond to, like `PreToolUse` or `Stop`

103* When a plugin is enabled, its hooks are merged with user and project hooks1332. Add a [matcher group](#matcher-patterns) to filter when it fires, like "only for the Bash tool"

104* Multiple hooks from different sources can respond to the same event1343. Define one or more [hook handlers](#hook-handler-fields) to run when matched

105* Plugin hooks use the `${CLAUDE_PLUGIN_ROOT}` environment variable to reference plugin files

106 135

107**Example plugin hook configuration**:136See [How a hook resolves](#how-a-hook-resolves) above for a complete walkthrough with an annotated example.

137

138<Note>

139 This page uses specific terms for each level: **hook event** for the lifecycle point, **matcher group** for the filter, and **hook handler** for the shell command, prompt, or agent that runs. "Hook" on its own refers to the general feature.

140</Note>

141

142### Hook locations

143

144Where you define a hook determines its scope:

145

146| Location | Scope | Shareable |

147| :--------------------------------------------------------- | :---------------------------- | :--------------------------------- |

148| `~/.claude/settings.json` | All your projects | No, local to your machine |

149| `.claude/settings.json` | Single project | Yes, can be committed to the repo |

150| `.claude/settings.local.json` | Single project | No, gitignored |

151| Managed policy settings | Organization-wide | Yes, admin-controlled |

152| [Plugin](/en/plugins) `hooks/hooks.json` | When plugin is enabled | Yes, bundled with the plugin |

153| [Skill](/en/skills) or [agent](/en/sub-agents) frontmatter | While the component is active | Yes, defined in the component file |

154

155For details on settings file resolution, see [settings](/en/settings). Enterprise administrators can use `allowManagedHooksOnly` to block user, project, and plugin hooks. See [Hook configuration](/en/settings#hook-configuration).

156

157### Matcher patterns

158

159The `matcher` field is a regex string that filters when hooks fire. Use `"*"`, `""`, or omit `matcher` entirely to match all occurrences. Each event type matches on a different field:

160

161| Event | What the matcher filters | Example matcher values |

162| :--------------------------------------------------------------------- | :------------------------ | :----------------------------------------------------------------------------- |

164| `SessionStart` | how the session started | `startup`, `resume`, `clear`, `compact` |

165| `SessionEnd` | why the session ended | `clear`, `logout`, `prompt_input_exit`, `bypass_permissions_disabled`, `other` |

166| `Notification` | notification type | `permission_prompt`, `idle_prompt`, `auth_success`, `elicitation_dialog` |

167| `SubagentStart` | agent type | `Bash`, `Explore`, `Plan`, or custom agent names |

168| `PreCompact` | what triggered compaction | `manual`, `auto` |

169| `SubagentStop` | agent type | same values as `SubagentStart` |

170| `UserPromptSubmit`, `Stop`, `TeammateIdle`, `TaskCompleted` | no matcher support | always fires on every occurrence |

171

172The matcher is a regex, so `Edit|Write` matches either tool and `Notebook.*` matches any tool starting with Notebook. The matcher runs against a field from the [JSON input](#hook-input-and-output) that Claude Code sends to your hook on stdin. For tool events, that field is `tool_name`. Each [hook event](#hook-events) section lists the full set of matcher values and the input schema for that event.

173

174This example runs a linting script only when Claude writes or edits a file:

108 175

109```json theme={null}176```json theme={null}

110{177{

111 "description": "Automatic code formatting",

112 "hooks": {178 "hooks": {

113 "PostToolUse": [179 "PostToolUse": [

114 {180 {

115 "matcher": "Write|Edit",181 "matcher": "Edit|Write",

116 "hooks": [182 "hooks": [

117 {183 {

118 "type": "command",184 "type": "command",

119 "command": "${CLAUDE_PLUGIN_ROOT}/scripts/format.sh",185 "command": "/path/to/lint-check.sh"

120 "timeout": 30

121 }186 }

122 ]187 ]

123 }188 }

126}191}

127```192```

128 193

129<Note>194`UserPromptSubmit` and `Stop` don't support matchers and always fire on every occurrence. If you add a `matcher` field to these events, it is silently ignored.

130 Plugin hooks use the same format as regular hooks with an optional `description` field to explain the hook's purpose.

131</Note>

~~132~~

133<Note>

134 Plugin hooks run alongside your custom hooks. If multiple hooks match an event, they all execute in parallel.

135</Note>

136 195

137**Environment variables for plugins**:196#### Match MCP tools

138 197

139* `${CLAUDE_PLUGIN_ROOT}`: Absolute path to the plugin directory198[MCP](/en/mcp) server tools appear as regular tools in tool events (`PreToolUse`, `PostToolUse`, `PostToolUseFailure`, `PermissionRequest`), so you can match them the same way you match any other tool name.

140* `${CLAUDE_PROJECT_DIR}`: Project root directory (same as for project hooks)

141* All standard environment variables are available

142 199

143See the [plugin components reference](/en/plugins-reference#hooks) for details on creating plugin hooks.200MCP tools follow the naming pattern `mcp__<server>__<tool>`, for example:

144 201

145## Prompt-Based Hooks202* `mcp__memory__create_entities`: Memory server's create entities tool

203* `mcp__filesystem__read_file`: Filesystem server's read file tool

204* `mcp__github__search_repositories`: GitHub server's search tool

146 205

147In addition to bash command hooks (`type: "command"`), Claude Code supports prompt-based hooks (`type: "prompt"`) that use an LLM to evaluate whether to allow or block an action. Prompt-based hooks are currently only supported for `Stop` and `SubagentStop` hooks, where they enable intelligent, context-aware decisions.206Use regex patterns to target specific MCP tools or groups of tools:

148 207

149### How prompt-based hooks work208* `mcp__memory__.*` matches all tools from the `memory` server

209* `mcp__.*__write.*` matches any tool containing "write" from any server

150 210

151Instead of executing a bash command, prompt-based hooks:211This example logs all memory server operations and validates write operations from any MCP server:

~~152~~

1531. Send the hook input and your prompt to a fast LLM (Haiku)

1542. The LLM responds with structured JSON containing a decision

1553. Claude Code processes the decision automatically

~~156~~

157### Configuration

158 212

159```json theme={null}213```json theme={null}

160{214{

161 "hooks": {215 "hooks": {

162 "Stop": [216 "PreToolUse": [

163 {217 {

218 "matcher": "mcp__memory__.*",

164 "hooks": [219 "hooks": [

165 {220 {

166 "type": "prompt",221 "type": "command",

167 "prompt": "Evaluate if Claude should stop: $ARGUMENTS. Check if all tasks are complete."222 "command": "echo 'Memory operation initiated' >> ~/mcp-operations.log"

223 }

224 ]

225 },

226 {

227 "matcher": "mcp__.*__write.*",

228 "hooks": [

229 {

230 "type": "command",

231 "command": "/home/user/scripts/validate-mcp-write.py"

168 }232 }

169 ]233 ]

170 }234 }

173}237}

174```238```

175 239

176**Fields:**240### Hook handler fields

177 241

178* `type`: Must be `"prompt"`242Each object in the inner `hooks` array is a hook handler: the shell command, LLM prompt, or agent that runs when the matcher matches. There are three types:

179* `prompt`: The prompt text to send to the LLM

180 * Use `$ARGUMENTS` as a placeholder for the hook input JSON

181 * If `$ARGUMENTS` is not present, input JSON is appended to the prompt

182* `timeout`: (Optional) Timeout in seconds (default: 30 seconds)

183 243

184### Response schema244* **[Command hooks](#command-hook-fields)** (`type: "command"`): run a shell command. Your script receives the event's [JSON input](#hook-input-and-output) on stdin and communicates results back through exit codes and stdout.

245* **[Prompt hooks](#prompt-and-agent-hook-fields)** (`type: "prompt"`): send a prompt to a Claude model for single-turn evaluation. The model returns a yes/no decision as JSON. See [Prompt-based hooks](#prompt-based-hooks).

246* **[Agent hooks](#prompt-and-agent-hook-fields)** (`type: "agent"`): spawn a subagent that can use tools like Read, Grep, and Glob to verify conditions before returning a decision. See [Agent-based hooks](#agent-based-hooks).

185 247

186The LLM must respond with JSON containing:248#### Common fields

187 249

188```json theme={null}250These fields apply to all hook types:

189{

190 "decision": "approve" | "block",

191 "reason": "Explanation for the decision",

192 "continue": false, // Optional: stops Claude entirely

193 "stopReason": "Message shown to user", // Optional: custom stop message

194 "systemMessage": "Warning or context" // Optional: shown to user

195}

196```

197 251

198**Response fields:**252| Field | Required | Description |

253| :-------------- | :------- | :-------------------------------------------------------------------------------------------------------------------------------------------- |

254| `type` | yes | `"command"`, `"prompt"`, or `"agent"` |

255| `timeout` | no | Seconds before canceling. Defaults: 600 for command, 30 for prompt, 60 for agent |

256| `statusMessage` | no | Custom spinner message displayed while the hook runs |

257| `once` | no | If `true`, runs only once per session then is removed. Skills only, not agents. See [Hooks in skills and agents](#hooks-in-skills-and-agents) |

199 258

200* `decision`: `"approve"` allows the action, `"block"` prevents it259#### Command hook fields

201* `reason`: Explanation shown to Claude when decision is `"block"`

202* `continue`: (Optional) If `false`, stops Claude's execution entirely

203* `stopReason`: (Optional) Message shown when `continue` is false

204* `systemMessage`: (Optional) Additional message shown to the user

205 260

206### Supported hook events261In addition to the [common fields](#common-fields), command hooks accept these fields:

207 262

208Prompt-based hooks work with any hook event, but are most useful for:263| Field | Required | Description |

264| :-------- | :------- | :------------------------------------------------------------------------------------------------------------------ |

265| `command` | yes | Shell command to execute |

266| `async` | no | If `true`, runs in the background without blocking. See [Run hooks in the background](#run-hooks-in-the-background) |

209 267

210* **Stop**: Intelligently decide if Claude should continue working268#### Prompt and agent hook fields

211* **SubagentStop**: Evaluate if a subagent has completed its task

212* **UserPromptSubmit**: Validate user prompts with LLM assistance

213* **PreToolUse**: Make context-aware permission decisions

214* **PermissionRequest**: Intelligently allow or deny permission dialogs

215 269

216### Example: Intelligent Stop hook270In addition to the [common fields](#common-fields), prompt and agent hooks accept these fields:

217 271

218```json theme={null}272| Field | Required | Description |

219{273| :------- | :------- | :------------------------------------------------------------------------------------------ |

274| `prompt` | yes | Prompt text to send to the model. Use `$ARGUMENTS` as a placeholder for the hook input JSON |

275| `model` | no | Model to use for evaluation. Defaults to a fast model |

276

277All matching hooks run in parallel, and identical handlers are deduplicated automatically. Handlers run in the current directory with Claude Code's environment. The `$CLAUDE_CODE_REMOTE` environment variable is set to `"true"` in remote web environments and not set in the local CLI.

278

279### Reference scripts by path

280

281Use environment variables to reference hook scripts relative to the project or plugin root, regardless of the working directory when the hook runs:

282

283* `$CLAUDE_PROJECT_DIR`: the project root. Wrap in quotes to handle paths with spaces.

284* `${CLAUDE_PLUGIN_ROOT}`: the plugin's root directory, for scripts bundled with a [plugin](/en/plugins).

285

286<Tabs>

287 <Tab title="Project scripts">

288 This example uses `$CLAUDE_PROJECT_DIR` to run a style checker from the project's `.claude/hooks/` directory after any `Write` or `Edit` tool call:

289

290 ```json theme={null}

291 {

220 "hooks": {292 "hooks": {

221 "Stop": [293 "PostToolUse": [

222 {294 {

295 "matcher": "Write|Edit",

223 "hooks": [296 "hooks": [

224 {297 {

225 "type": "prompt",298 "type": "command",

226 "prompt": "You are evaluating whether Claude should stop working. Context: $ARGUMENTS\n\nAnalyze the conversation and determine if:\n1. All user-requested tasks are complete\n2. Any errors need to be addressed\n3. Follow-up work is needed\n\nRespond with JSON: {\"decision\": \"approve\" or \"block\", \"reason\": \"your explanation\"}",299 "command": "\"$CLAUDE_PROJECT_DIR\"/.claude/hooks/check-style.sh"

227 "timeout": 30

228 }300 }

229 ]301 ]

230 }302 }

231 ]303 ]

232 }304 }

233}305 }

234```306 ```

307 </Tab>

235 308

236### Example: SubagentStop with custom logic309 <Tab title="Plugin scripts">

310 Define plugin hooks in `hooks/hooks.json` with an optional top-level `description` field. When a plugin is enabled, its hooks merge with your user and project hooks.

237 311

238```json theme={null}312 This example runs a formatting script bundled with the plugin:

239{313

314 ```json theme={null}

315 {

316 "description": "Automatic code formatting",

240 "hooks": {317 "hooks": {

241 "SubagentStop": [318 "PostToolUse": [

242 {319 {

320 "matcher": "Write|Edit",

243 "hooks": [321 "hooks": [

244 {322 {

245 "type": "prompt",323 "type": "command",

246 "prompt": "Evaluate if this subagent should stop. Input: $ARGUMENTS\n\nCheck if:\n- The subagent completed its assigned task\n- Any errors occurred that need fixing\n- Additional context gathering is needed\n\nReturn: {\"decision\": \"approve\" or \"block\", \"reason\": \"explanation\"}"324 "command": "${CLAUDE_PLUGIN_ROOT}/scripts/format.sh",

325 "timeout": 30

247 }326 }

248 ]327 ]

249 }328 }

250 ]329 ]

251 }330 }

252}331 }

332 ```

333

334 See the [plugin components reference](/en/plugins-reference#hooks) for details on creating plugin hooks.

335 </Tab>

336</Tabs>

337

338### Hooks in skills and agents

339

340In addition to settings files and plugins, hooks can be defined directly in [skills](/en/skills) and [subagents](/en/sub-agents) using frontmatter. These hooks are scoped to the component's lifecycle and only run when that component is active.

341

342All hook events are supported. For subagents, `Stop` hooks are automatically converted to `SubagentStop` since that is the event that fires when a subagent completes.

343

344Hooks use the same configuration format as settings-based hooks but are scoped to the component's lifetime and cleaned up when it finishes.

345

346This skill defines a `PreToolUse` hook that runs a security validation script before each `Bash` command:

347

348```yaml theme={null}

349---

350name: secure-operations

351description: Perform operations with security checks

352hooks:

353 PreToolUse:

354 - matcher: "Bash"

355 hooks:

356 - type: command

357 command: "./scripts/security-check.sh"

358---

253```359```

254 360

255### Comparison with bash command hooks361Agents use the same format in their YAML frontmatter.

256 362

257| Feature | Bash Command Hooks | Prompt-Based Hooks |363### The `/hooks` menu

258| --------------------- | ----------------------- | ------------------------------ |

259| **Execution** | Runs bash script | Queries LLM |

260| **Decision logic** | You implement in code | LLM evaluates context |

261| **Setup complexity** | Requires script file | Configure prompt |

262| **Context awareness** | Limited to script logic | Natural language understanding |

263| **Performance** | Fast (local execution) | Slower (API call) |

264| **Use case** | Deterministic rules | Context-aware decisions |

265 364

266### Best practices365Type `/hooks` in Claude Code to open the interactive hooks manager, where you can view, add, and delete hooks without editing settings files directly. For a step-by-step walkthrough, see [Set up your first hook](/en/hooks-guide#set-up-your-first-hook) in the guide.

267 366

268* **Be specific in prompts**: Clearly state what you want the LLM to evaluate367Each hook in the menu is labeled with a bracket prefix indicating its source:

269* **Include decision criteria**: List the factors the LLM should consider

270* **Test your prompts**: Verify the LLM makes correct decisions for your use cases

271* **Set appropriate timeouts**: Default is 30 seconds, adjust if needed

272* **Use for complex decisions**: Bash hooks are better for simple, deterministic rules

273 368

274See the [plugin components reference](/en/plugins-reference#hooks) for details on creating plugin hooks.369* `[User]`: from `~/.claude/settings.json`

370* `[Project]`: from `.claude/settings.json`

371* `[Local]`: from `.claude/settings.local.json`

372* `[Plugin]`: from a plugin's `hooks/hooks.json`, read-only

275 373

276## Hook Events374### Disable or remove hooks

277 375

278### PreToolUse376To remove a hook, delete its entry from the settings JSON file, or use the `/hooks` menu and select the hook to delete it.

279 377

280Runs after Claude creates tool parameters and before processing the tool call.378To temporarily disable all hooks without removing them, set `"disableAllHooks": true` in your settings file or use the toggle in the `/hooks` menu. There is no way to disable an individual hook while keeping it in the configuration.

281 379

282**Common matchers:**380Direct edits to hooks in settings files don't take effect immediately. Claude Code captures a snapshot of hooks at startup and uses it throughout the session. This prevents malicious or accidental hook modifications from taking effect mid-session without your review. If hooks are modified externally, Claude Code warns you and requires review in the `/hooks` menu before changes apply.

283 381

284* `Task` - Subagent tasks (see [subagents documentation](/en/sub-agents))382## Hook input and output

285* `Bash` - Shell commands

286* `Glob` - File pattern matching

287* `Grep` - Content search

288* `Read` - File reading

289* `Edit` - File editing

290* `Write` - File writing

291* `WebFetch`, `WebSearch` - Web operations

292 383

293Use [PreToolUse decision control](#pretooluse-decision-control) to allow, deny, or ask for permission to use the tool.384Hooks receive JSON data via stdin and communicate results through exit codes, stdout, and stderr. This section covers fields and behavior common to all events. Each event's section under [Hook events](#hook-events) includes its specific input schema and decision control options.

294 385

295### PermissionRequest386### Common input fields

296 387

297Runs when the user is shown a permission dialog.388All hook events receive these fields via stdin as JSON, in addition to event-specific fields documented in each [hook event](#hook-events) section:

298Use [PermissionRequest decision control](#permissionrequest-decision-control) to allow or deny on behalf of the user.

299 389

300Recognizes the same matcher values as PreToolUse.390| Field | Description |

391| :---------------- | :----------------------------------------------------------------------------------------------------------------------------------------- |

392| `session_id` | Current session identifier |

393| `transcript_path` | Path to conversation JSON |

394| `cwd` | Current working directory when the hook is invoked |

395| `permission_mode` | Current [permission mode](/en/permissions#permission-modes): `"default"`, `"plan"`, `"acceptEdits"`, `"dontAsk"`, or `"bypassPermissions"` |

396| `hook_event_name` | Name of the event that fired |

301 397

302### PostToolUse398For example, a `PreToolUse` hook for a Bash command receives this on stdin:

303 399

304Runs immediately after a tool completes successfully.400```json theme={null}

401{

402 "session_id": "abc123",

403 "transcript_path": "/home/user/.claude/projects/.../transcript.jsonl",

404 "cwd": "/home/user/my-project",

405 "permission_mode": "default",

406 "hook_event_name": "PreToolUse",

407 "tool_name": "Bash",

408 "tool_input": {

409 "command": "npm test"

410 }

411}

412```

305 413

306Recognizes the same matcher values as PreToolUse.414The `tool_name` and `tool_input` fields are event-specific. Each [hook event](#hook-events) section documents the additional fields for that event.

307 415

308### Notification416### Exit code output

417

418The exit code from your hook command tells Claude Code whether the action should proceed, be blocked, or be ignored.

419

420**Exit 0** means success. Claude Code parses stdout for [JSON output fields](#json-output). JSON output is only processed on exit 0. For most events, stdout is only shown in verbose mode (`Ctrl+O`). The exceptions are `UserPromptSubmit` and `SessionStart`, where stdout is added as context that Claude can see and act on.

421

422**Exit 2** means a blocking error. Claude Code ignores stdout and any JSON in it. Instead, stderr text is fed back to Claude as an error message. The effect depends on the event: `PreToolUse` blocks the tool call, `UserPromptSubmit` rejects the prompt, and so on. See [exit code 2 behavior](#exit-code-2-behavior-per-event) for the full list.

309 423

310Runs when Claude Code sends notifications. Supports matchers to filter by notification type.424**Any other exit code** is a non-blocking error. stderr is shown in verbose mode (`Ctrl+O`) and execution continues.

311 425

312**Common matchers:**426For example, a hook command script that blocks dangerous Bash commands:

427

428```bash theme={null}

429#!/bin/bash

430# Reads JSON input from stdin, checks the command

431command=$(jq -r '.tool_input.command' < /dev/stdin)

432

433if [[ "$command" == rm* ]]; then

434 echo "Blocked: rm commands are not allowed" >&2

435 exit 2 # Blocking error: tool call is prevented

436fi

437

438exit 0 # Success: tool call proceeds

439```

313 440

314* `permission_prompt` - Permission requests from Claude Code441#### Exit code 2 behavior per event

315* `idle_prompt` - When Claude is waiting for user input (after 60+ seconds of idle time)

316* `auth_success` - Authentication success notifications

317* `elicitation_dialog` - When Claude Code needs input for MCP tool elicitation

318 442

319You can use matchers to run different hooks for different notification types, or omit the matcher to run hooks for all notifications.443Exit code 2 is the way a hook signals "stop, don't do this." The effect depends on the event, because some events represent actions that can be blocked (like a tool call that hasn't happened yet) and others represent things that already happened or can't be prevented.

320 444

321**Example: Different notifications for different types**445| Hook event | Can block? | What happens on exit 2 |

446| :------------------- | :--------- | :----------------------------------------------------------------- |

447| `PreToolUse` | Yes | Blocks the tool call |

448| `PermissionRequest` | Yes | Denies the permission |

449| `UserPromptSubmit` | Yes | Blocks prompt processing and erases the prompt |

450| `Stop` | Yes | Prevents Claude from stopping, continues the conversation |

451| `SubagentStop` | Yes | Prevents the subagent from stopping |

452| `TeammateIdle` | Yes | Prevents the teammate from going idle (teammate continues working) |

453| `TaskCompleted` | Yes | Prevents the task from being marked as completed |

454| `PostToolUse` | No | Shows stderr to Claude (tool already ran) |

455| `PostToolUseFailure` | No | Shows stderr to Claude (tool already failed) |

456| `Notification` | No | Shows stderr to user only |

457| `SubagentStart` | No | Shows stderr to user only |

458| `SessionStart` | No | Shows stderr to user only |

459| `SessionEnd` | No | Shows stderr to user only |

460| `PreCompact` | No | Shows stderr to user only |

461

462### JSON output

463

464Exit codes let you allow or block, but JSON output gives you finer-grained control. Instead of exiting with code 2 to block, exit 0 and print a JSON object to stdout. Claude Code reads specific fields from that JSON to control behavior, including [decision control](#decision-control) for blocking, allowing, or escalating to the user.

465

466<Note>

467 You must choose one approach per hook, not both: either use exit codes alone for signaling, or exit 0 and print JSON for structured control. Claude Code only processes JSON on exit 0. If you exit 2, any JSON is ignored.

468</Note>

469

470Your hook's stdout must contain only the JSON object. If your shell profile prints text on startup, it can interfere with JSON parsing. See [JSON validation failed](/en/hooks-guide#json-validation-failed) in the troubleshooting guide.

471

472The JSON object supports three kinds of fields:

473

474* **Universal fields** like `continue` work across all events. These are listed in the table below.

475* **Top-level `decision` and `reason`** are used by some events to block or provide feedback.

476* **`hookSpecificOutput`** is a nested object for events that need richer control. It requires a `hookEventName` field set to the event name.

477

478| Field | Default | Description |

479| :--------------- | :------ | :------------------------------------------------------------------------------------------------------------------------- |

480| `continue` | `true` | If `false`, Claude stops processing entirely after the hook runs. Takes precedence over any event-specific decision fields |

481| `stopReason` | none | Message shown to the user when `continue` is `false`. Not shown to Claude |

482| `suppressOutput` | `false` | If `true`, hides stdout from verbose mode output |

483| `systemMessage` | none | Warning message shown to the user |

484

485To stop Claude entirely regardless of event type:

322 486

323```json theme={null}487```json theme={null}

324{488{ "continue": false, "stopReason": "Build failed, fix errors before continuing" }

325 "hooks": {489```

326 "Notification": [490

327 {491#### Decision control

328 "matcher": "permission_prompt",492

329 "hooks": [493Not every event supports blocking or controlling behavior through JSON. The events that do each use a different set of fields to express that decision. Use this table as a quick reference before writing a hook:

494

495| Events | Decision pattern | Key fields |

496| :-------------------------------------------------------------------- | :------------------- | :---------------------------------------------------------------- |

497| UserPromptSubmit, PostToolUse, PostToolUseFailure, Stop, SubagentStop | Top-level `decision` | `decision: "block"`, `reason` |

498| TeammateIdle, TaskCompleted | Exit code only | Exit code 2 blocks the action, stderr is fed back as feedback |

499| PreToolUse | `hookSpecificOutput` | `permissionDecision` (allow/deny/ask), `permissionDecisionReason` |

500| PermissionRequest | `hookSpecificOutput` | `decision.behavior` (allow/deny) |

501

502Here are examples of each pattern in action:

503

504<Tabs>

505 <Tab title="Top-level decision">

506 Used by `UserPromptSubmit`, `PostToolUse`, `PostToolUseFailure`, `Stop`, and `SubagentStop`. The only value is `"block"`. To allow the action to proceed, omit `decision` from your JSON, or exit 0 without any JSON at all:

507

508 ```json theme={null}

330 {509 {

331 "type": "command",510 "decision": "block",

332 "command": "/path/to/permission-alert.sh"511 "reason": "Test suite must pass before proceeding"

333 }512 }

334 ]513 ```

335 },514 </Tab>

515

516 <Tab title="PreToolUse">

517 Uses `hookSpecificOutput` for richer control: allow, deny, or escalate to the user. You can also modify tool input before it runs or inject additional context for Claude. See [PreToolUse decision control](#pretooluse-decision-control) for the full set of options.

518

519 ```json theme={null}

336 {520 {

337 "matcher": "idle_prompt",521 "hookSpecificOutput": {

338 "hooks": [522 "hookEventName": "PreToolUse",

523 "permissionDecision": "deny",

524 "permissionDecisionReason": "Database writes are not allowed"

525 }

526 }

527 ```

528 </Tab>

529

530 <Tab title="PermissionRequest">

531 Uses `hookSpecificOutput` to allow or deny a permission request on behalf of the user. When allowing, you can also modify the tool's input or apply permission rules so the user isn't prompted again. See [PermissionRequest decision control](#permissionrequest-decision-control) for the full set of options.

532

533 ```json theme={null}

339 {534 {

340 "type": "command",535 "hookSpecificOutput": {

341 "command": "/path/to/idle-notification.sh"536 "hookEventName": "PermissionRequest",

537 "decision": {

538 "behavior": "allow",

539 "updatedInput": {

540 "command": "npm run lint"

342 }541 }

343 ]

344 }542 }

345 ]

346 }543 }

347}544 }

348```545 ```

546 </Tab>

547</Tabs>

349 548

350### UserPromptSubmit549For extended examples including Bash command validation, prompt filtering, and auto-approval scripts, see [What you can automate](/en/hooks-guide#what-you-can-automate) in the guide and the [Bash command validator reference implementation](https://github.com/anthropics/claude-code/blob/main/examples/hooks/bash_command_validator_example.py).

351 550

352Runs when the user submits a prompt, before Claude processes it. This allows you551## Hook events

353to add additional context based on the prompt/conversation, validate prompts, or

354block certain types of prompts.

355 552

356### Stop553Each event corresponds to a point in Claude Code's lifecycle where hooks can run. The sections below are ordered to match the lifecycle: from session setup through the agentic loop to session end. Each section describes when the event fires, what matchers it supports, the JSON input it receives, and how to control behavior through output.

357 554

358Runs when the main Claude Code agent has finished responding. Does not run if555### SessionStart

359the stoppage occurred due to a user interrupt.

360 556

361### SubagentStop557Runs when Claude Code starts a new session or resumes an existing session. Useful for loading development context like existing issues or recent changes to your codebase, or setting up environment variables. For static context that does not require a script, use [CLAUDE.md](/en/memory) instead.

362 558

363Runs when a Claude Code subagent (Task tool call) has finished responding.559SessionStart runs on every session, so keep these hooks fast.

364 560

365### PreCompact561The matcher value corresponds to how the session was initiated:

366 562

367Runs before Claude Code is about to run a compact operation.563| Matcher | When it fires |

564| :-------- | :------------------------------------- |

565| `startup` | New session |

566| `resume` | `--resume`, `--continue`, or `/resume` |

567| `clear` | `/clear` |

568| `compact` | Auto or manual compaction |

368 569

369**Matchers:**570#### SessionStart input

370 571

371* `manual` - Invoked from `/compact`572In addition to the [common input fields](#common-input-fields), SessionStart hooks receive `source`, `model`, and optionally `agent_type`. The `source` field indicates how the session started: `"startup"` for new sessions, `"resume"` for resumed sessions, `"clear"` after `/clear`, or `"compact"` after compaction. The `model` field contains the model identifier. If you start Claude Code with `claude --agent <name>`, an `agent_type` field contains the agent name.

372* `auto` - Invoked from auto-compact (due to full context window)

373 573

374### SessionStart574```json theme={null}

575{

576 "session_id": "abc123",

577 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",

578 "cwd": "/Users/...",

579 "permission_mode": "default",

580 "hook_event_name": "SessionStart",

581 "source": "startup",

582 "model": "claude-sonnet-4-5-20250929"

583}

584```

375 585

376Runs when Claude Code starts a new session or resumes an existing session (which586#### SessionStart decision control

377currently does start a new session under the hood). Useful for loading in

378development context like existing issues or recent changes to your codebase, installing dependencies, or setting up environment variables.

379 587

380**Matchers:**588Any text your hook script prints to stdout is added as context for Claude. In addition to the [JSON output fields](#json-output) available to all hooks, you can return these event-specific fields:

381 589

382* `startup` - Invoked from startup590| Field | Description |

383* `resume` - Invoked from `--resume`, `--continue`, or `/resume`591| :------------------ | :------------------------------------------------------------------------ |

384* `clear` - Invoked from `/clear`592| `additionalContext` | String added to Claude's context. Multiple hooks' values are concatenated |

385* `compact` - Invoked from auto or manual compact.

386 593

387#### Persisting environment variables594```json theme={null}

595{

596 "hookSpecificOutput": {

597 "hookEventName": "SessionStart",

598 "additionalContext": "My additional context here"

599 }

600}

601```

602

603#### Persist environment variables

388 604

389SessionStart hooks have access to the `CLAUDE_ENV_FILE` environment variable, which provides a file path where you can persist environment variables for subsequent bash commands.605SessionStart hooks have access to the `CLAUDE_ENV_FILE` environment variable, which provides a file path where you can persist environment variables for subsequent Bash commands.

390 606

391**Example: Setting individual environment variables**607To set individual environment variables, write `export` statements to `CLAUDE_ENV_FILE`. Use append (`>>`) to preserve variables set by other hooks:

392 608

393```bash theme={null}609```bash theme={null}

394#!/bin/bash610#!/bin/bash

395 611

396if [ -n "$CLAUDE_ENV_FILE" ]; then612if [ -n "$CLAUDE_ENV_FILE" ]; then

397 echo 'export NODE_ENV=production' >> "$CLAUDE_ENV_FILE"613 echo 'export NODE_ENV=production' >> "$CLAUDE_ENV_FILE"

398 echo 'export API_KEY=your-api-key' >> "$CLAUDE_ENV_FILE"614 echo 'export DEBUG_LOG=true' >> "$CLAUDE_ENV_FILE"

399 echo 'export PATH="$PATH:./node_modules/.bin"' >> "$CLAUDE_ENV_FILE"615 echo 'export PATH="$PATH:./node_modules/.bin"' >> "$CLAUDE_ENV_FILE"

400fi616fi

401 617

402exit 0618exit 0

403```619```

404 620

405**Example: Persisting all environment changes from the hook**621To capture all environment changes from setup commands, compare the exported variables before and after:

~~406~~

407When your setup modifies the environment (for example, `nvm use`), capture and persist all changes by diffing the environment:

408 622

409```bash theme={null}623```bash theme={null}

410#!/bin/bash624#!/bin/bash

423exit 0637exit 0

424```638```

425 639

426Any variables written to this file will be available in all subsequent bash commands that Claude Code executes during the session.640Any variables written to this file will be available in all subsequent Bash commands that Claude Code executes during the session.

427 641

428<Note>642<Note>

429 `CLAUDE_ENV_FILE` is only available for SessionStart hooks. Other hook types do not have access to this variable.643 `CLAUDE_ENV_FILE` is available for SessionStart hooks. Other hook types do not have access to this variable.

430</Note>644</Note>

431 645

432### SessionEnd646### UserPromptSubmit

433 647

434Runs when a Claude Code session ends. Useful for cleanup tasks, logging session648Runs when the user submits a prompt, before Claude processes it. This allows you

435statistics, or saving session state.649to add additional context based on the prompt/conversation, validate prompts, or

650block certain types of prompts.

651

652#### UserPromptSubmit input

653

654In addition to the [common input fields](#common-input-fields), UserPromptSubmit hooks receive the `prompt` field containing the text the user submitted.

655

656```json theme={null}

657{

658 "session_id": "abc123",

659 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",

660 "cwd": "/Users/...",

661 "permission_mode": "default",

662 "hook_event_name": "UserPromptSubmit",

663 "prompt": "Write a function to calculate the factorial of a number"

664}

665```

666

667#### UserPromptSubmit decision control

668

669`UserPromptSubmit` hooks can control whether a user prompt is processed and add context. All [JSON output fields](#json-output) are available.

670

671There are two ways to add context to the conversation on exit code 0:

672

673* **Plain text stdout**: any non-JSON text written to stdout is added as context

674* **JSON with `additionalContext`**: use the JSON format below for more control. The `additionalContext` field is added as context

675

676Plain stdout is shown as hook output in the transcript. The `additionalContext` field is added more discretely.

677

678To block a prompt, return a JSON object with `decision` set to `"block"`:

679

680| Field | Description |

681| :------------------ | :----------------------------------------------------------------------------------------------------------------- |

682| `decision` | `"block"` prevents the prompt from being processed and erases it from context. Omit to allow the prompt to proceed |

683| `reason` | Shown to the user when `decision` is `"block"`. Not added to context |

684| `additionalContext` | String added to Claude's context |

685

686```json theme={null}

687{

688 "decision": "block",

689 "reason": "Explanation for decision",

690 "hookSpecificOutput": {

691 "hookEventName": "UserPromptSubmit",

692 "additionalContext": "My additional context here"

693 }

694}

695```

696

697<Note>

698 The JSON format isn't required for simple use cases. To add context, you can print plain text to stdout with exit code 0. Use JSON when you need to

699 block prompts or want more structured control.

700</Note>

701

702### PreToolUse

703

704Runs after Claude creates tool parameters and before processing the tool call. Matches on tool name: `Bash`, `Edit`, `Write`, `Read`, `Glob`, `Grep`, `Task`, `WebFetch`, `WebSearch`, and any [MCP tool names](#match-mcp-tools).

705

706Use [PreToolUse decision control](#pretooluse-decision-control) to allow, deny, or ask for permission to use the tool.

707

708#### PreToolUse input

709

710In addition to the [common input fields](#common-input-fields), PreToolUse hooks receive `tool_name`, `tool_input`, and `tool_use_id`. The `tool_input` fields depend on the tool:

711

712##### Bash

713

714Executes shell commands.

715

717| :------------------ | :------ | :----------------- | :-------------------------------------------- |

722

723##### Write

724

725Creates or overwrites a file.

726

728| :---------- | :----- | :-------------------- | :--------------------------------- |

731

732##### Edit

733

734Replaces a string in an existing file.

735

737| :------------ | :------ | :-------------------- | :--------------------------------- |

742

743##### Read

744

745Reads file contents.

746

748| :---------- | :----- | :-------------------- | :----------------------------------------- |

752

753##### Glob

754

755Finds files matching a glob pattern.

756

758| :-------- | :----- | :--------------- | :--------------------------------------------------------------------- |

759| `pattern` | string | `"**/*.ts"` | Glob pattern to match files against |

761

762##### Grep

763

764Searches file contents with regular expressions.

765

767| :------------ | :------ | :--------------- | :------------------------------------------------------------------------------------ |

774

775##### WebFetch

776

777Fetches and processes web content.

778

780| :------- | :----- | :---------------------------- | :----------------------------------- |

783

784##### WebSearch

785

786Searches the web.

787

789| :---------------- | :----- | :----------------------------- | :------------------------------------------------ |

793

794##### Task

795

796Spawns a [subagent](/en/sub-agents).

797

799| :-------------- | :----- | :------------------------- | :------------------------------------------- |

804

805#### PreToolUse decision control

806

807`PreToolUse` hooks can control whether a tool call proceeds. Unlike other hooks that use a top-level `decision` field, PreToolUse returns its decision inside a `hookSpecificOutput` object. This gives it richer control: three outcomes (allow, deny, or ask) plus the ability to modify tool input before execution.

808

809| Field | Description |

810| :------------------------- | :----------------------------------------------------------------------------------------------------------------------------------------------- |

811| `permissionDecision` | `"allow"` bypasses the permission system, `"deny"` prevents the tool call, `"ask"` prompts the user to confirm |

812| `permissionDecisionReason` | For `"allow"` and `"ask"`, shown to the user but not Claude. For `"deny"`, shown to Claude |

813| `updatedInput` | Modifies the tool's input parameters before execution. Combine with `"allow"` to auto-approve, or `"ask"` to show the modified input to the user |

814| `additionalContext` | String added to Claude's context before the tool executes |

815

816```json theme={null}

817{

818 "hookSpecificOutput": {

819 "hookEventName": "PreToolUse",

820 "permissionDecision": "allow",

821 "permissionDecisionReason": "My reason here",

822 "updatedInput": {

823 "field_to_modify": "new value"

824 },

825 "additionalContext": "Current environment: production. Proceed with caution."

826 }

827}

828```

829

830<Note>

831 PreToolUse previously used top-level `decision` and `reason` fields, but these are deprecated for this event. Use `hookSpecificOutput.permissionDecision` and `hookSpecificOutput.permissionDecisionReason` instead. The deprecated values `"approve"` and `"block"` map to `"allow"` and `"deny"` respectively. Other events like PostToolUse and Stop continue to use top-level `decision` and `reason` as their current format.

832</Note>

833

834### PermissionRequest

835

836Runs when the user is shown a permission dialog.

837Use [PermissionRequest decision control](#permissionrequest-decision-control) to allow or deny on behalf of the user.

838

839Matches on tool name, same values as PreToolUse.

840

841#### PermissionRequest input

842

843PermissionRequest hooks receive `tool_name` and `tool_input` fields like PreToolUse hooks, but without `tool_use_id`. An optional `permission_suggestions` array contains the "always allow" options the user would normally see in the permission dialog. The difference is when the hook fires: PermissionRequest hooks run when a permission dialog is about to be shown to the user, while PreToolUse hooks run before tool execution regardless of permission status.

844

845```json theme={null}

846{

847 "session_id": "abc123",

848 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",

849 "cwd": "/Users/...",

850 "permission_mode": "default",

851 "hook_event_name": "PermissionRequest",

852 "tool_name": "Bash",

853 "tool_input": {

854 "command": "rm -rf node_modules",

855 "description": "Remove node_modules directory"

856 },

857 "permission_suggestions": [

858 { "type": "toolAlwaysAllow", "tool": "Bash" }

859 ]

860}

861```

862

863#### PermissionRequest decision control

864

865`PermissionRequest` hooks can allow or deny permission requests. In addition to the [JSON output fields](#json-output) available to all hooks, your hook script can return a `decision` object with these event-specific fields:

866

867| Field | Description |

868| :------------------- | :------------------------------------------------------------------------------------------------------------- |

869| `behavior` | `"allow"` grants the permission, `"deny"` denies it |

870| `updatedInput` | For `"allow"` only: modifies the tool's input parameters before execution |

871| `updatedPermissions` | For `"allow"` only: applies permission rule updates, equivalent to the user selecting an "always allow" option |

872| `message` | For `"deny"` only: tells Claude why the permission was denied |

873| `interrupt` | For `"deny"` only: if `true`, stops Claude |

874

875```json theme={null}

876{

877 "hookSpecificOutput": {

878 "hookEventName": "PermissionRequest",

879 "decision": {

880 "behavior": "allow",

881 "updatedInput": {

882 "command": "npm run lint"

883 }

884 }

885 }

886}

887```

888

889### PostToolUse

436 890

437The `reason` field in the hook input will be one of:891Runs immediately after a tool completes successfully.

438 892

439* `clear` - Session cleared with /clear command893Matches on tool name, same values as PreToolUse.

440* `logout` - User logged out

441* `prompt_input_exit` - User exited while prompt input was visible

442* `other` - Other exit reasons

443 894

444## Hook Input895#### PostToolUse input

445 896

446Hooks receive JSON data via stdin containing session information and897`PostToolUse` hooks fire after a tool has already executed successfully. The input includes both `tool_input`, the arguments sent to the tool, and `tool_response`, the result it returned. The exact schema for both depends on the tool.

447event-specific data:

448 898

449```typescript theme={null}899```json theme={null}

450{900{

451 // Common fields901 "session_id": "abc123",

452 session_id: string902 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",

453 transcript_path: string // Path to conversation JSON903 "cwd": "/Users/...",

454 cwd: string // The current working directory when the hook is invoked904 "permission_mode": "default",

455 permission_mode: string // Current permission mode: "default", "plan", "acceptEdits", or "bypassPermissions"905 "hook_event_name": "PostToolUse",

~~456~~ 906 "tool_name": "Write",

457 // Event-specific fields907 "tool_input": {

458 hook_event_name: string908 "file_path": "/path/to/file.txt",

459 ...909 "content": "file content"

910 },

911 "tool_response": {

912 "filePath": "/path/to/file.txt",

913 "success": true

914 },

915 "tool_use_id": "toolu_01ABC123..."

916}

917```

918

919#### PostToolUse decision control

920

921`PostToolUse` hooks can provide feedback to Claude after tool execution. In addition to the [JSON output fields](#json-output) available to all hooks, your hook script can return these event-specific fields:

922

923| Field | Description |

924| :--------------------- | :----------------------------------------------------------------------------------------- |

925| `decision` | `"block"` prompts Claude with the `reason`. Omit to allow the action to proceed |

926| `reason` | Explanation shown to Claude when `decision` is `"block"` |

927| `additionalContext` | Additional context for Claude to consider |

928| `updatedMCPToolOutput` | For [MCP tools](#match-mcp-tools) only: replaces the tool's output with the provided value |

929

930```json theme={null}

931{

932 "decision": "block",

933 "reason": "Explanation for decision",

934 "hookSpecificOutput": {

935 "hookEventName": "PostToolUse",

936 "additionalContext": "Additional information for Claude"

937 }

938}

939```

940

941### PostToolUseFailure

942

943Runs when a tool execution fails. This event fires for tool calls that throw errors or return failure results. Use this to log failures, send alerts, or provide corrective feedback to Claude.

944

945Matches on tool name, same values as PreToolUse.

946

947#### PostToolUseFailure input

948

949PostToolUseFailure hooks receive the same `tool_name` and `tool_input` fields as PostToolUse, along with error information as top-level fields:

950

951```json theme={null}

952{

953 "session_id": "abc123",

954 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",

955 "cwd": "/Users/...",

956 "permission_mode": "default",

957 "hook_event_name": "PostToolUseFailure",

958 "tool_name": "Bash",

959 "tool_input": {

960 "command": "npm test",

961 "description": "Run test suite"

962 },

963 "tool_use_id": "toolu_01ABC123...",

964 "error": "Command exited with non-zero status code 1",

965 "is_interrupt": false

966}

967```

968

969| Field | Description |

970| :------------- | :------------------------------------------------------------------------------ |

971| `error` | String describing what went wrong |

972| `is_interrupt` | Optional boolean indicating whether the failure was caused by user interruption |

973

974#### PostToolUseFailure decision control

975

976`PostToolUseFailure` hooks can provide context to Claude after a tool failure. In addition to the [JSON output fields](#json-output) available to all hooks, your hook script can return these event-specific fields:

977

978| Field | Description |

979| :------------------ | :------------------------------------------------------------ |

980| `additionalContext` | Additional context for Claude to consider alongside the error |

981

982```json theme={null}

983{

984 "hookSpecificOutput": {

985 "hookEventName": "PostToolUseFailure",

986 "additionalContext": "Additional information about the failure for Claude"

987 }

988}

989```

990

991### Notification

992

993Runs when Claude Code sends notifications. Matches on notification type: `permission_prompt`, `idle_prompt`, `auth_success`, `elicitation_dialog`. Omit the matcher to run hooks for all notification types.

994

995Use separate matchers to run different handlers depending on the notification type. This configuration triggers a permission-specific alert script when Claude needs permission approval and a different notification when Claude has been idle:

996

997```json theme={null}

998{

999 "hooks": {

1000 "Notification": [

1001 {

1002 "matcher": "permission_prompt",

1003 "hooks": [

1004 {

1005 "type": "command",

1006 "command": "/path/to/permission-alert.sh"

1007 }

1008 ]

1009 },

1010 {

1011 "matcher": "idle_prompt",

1012 "hooks": [

1013 {

1014 "type": "command",

1015 "command": "/path/to/idle-notification.sh"

1016 }

1017 ]

1018 }

1019 ]

1020 }

460}1021}

461```1022```

462 1023

463### PreToolUse Input1024#### Notification input

464 1025

465The exact schema for `tool_input` depends on the tool.1026In addition to the [common input fields](#common-input-fields), Notification hooks receive `message` with the notification text, an optional `title`, and `notification_type` indicating which type fired.

466 1027

467```json theme={null}1028```json theme={null}

468{1029{

470 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",1031 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",

471 "cwd": "/Users/...",1032 "cwd": "/Users/...",

472 "permission_mode": "default",1033 "permission_mode": "default",

473 "hook_event_name": "PreToolUse",1034 "hook_event_name": "Notification",

474 "tool_name": "Write",1035 "message": "Claude needs your permission to use Bash",

475 "tool_input": {1036 "title": "Permission needed",

476 "file_path": "/path/to/file.txt",1037 "notification_type": "permission_prompt"

477 "content": "file content"

478 },

479 "tool_use_id": "toolu_01ABC123..."

480}1038}

481```1039```

482 1040

483### PostToolUse Input1041Notification hooks cannot block or modify notifications. In addition to the [JSON output fields](#json-output) available to all hooks, you can return `additionalContext` to add context to the conversation:

1042

1043| Field | Description |

1044| :------------------ | :------------------------------- |

1045| `additionalContext` | String added to Claude's context |

1046

1047### SubagentStart

1048

1049Runs when a Claude Code subagent is spawned via the Task tool. Supports matchers to filter by agent type name (built-in agents like `Bash`, `Explore`, `Plan`, or custom agent names from `.claude/agents/`).

484 1050

485The exact schema for `tool_input` and `tool_response` depends on the tool.1051#### SubagentStart input

1052

1053In addition to the [common input fields](#common-input-fields), SubagentStart hooks receive `agent_id` with the unique identifier for the subagent and `agent_type` with the agent name (built-in agents like `"Bash"`, `"Explore"`, `"Plan"`, or custom agent names).

486 1054

487```json theme={null}1055```json theme={null}

488{1056{

490 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",1058 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",

491 "cwd": "/Users/...",1059 "cwd": "/Users/...",

492 "permission_mode": "default",1060 "permission_mode": "default",

493 "hook_event_name": "PostToolUse",1061 "hook_event_name": "SubagentStart",

494 "tool_name": "Write",1062 "agent_id": "agent-abc123",

495 "tool_input": {1063 "agent_type": "Explore"

496 "file_path": "/path/to/file.txt",

497 "content": "file content"

498 },

499 "tool_response": {

500 "filePath": "/path/to/file.txt",

501 "success": true

502 },

503 "tool_use_id": "toolu_01ABC123..."

504}1064}

505```1065```

506 1066

507### Notification Input1067SubagentStart hooks cannot block subagent creation, but they can inject context into the subagent. In addition to the [JSON output fields](#json-output) available to all hooks, you can return:

1068

1069| Field | Description |

1070| :------------------ | :------------------------------------- |

1071| `additionalContext` | String added to the subagent's context |

508 1072

509```json theme={null}1073```json theme={null}

510{1074{

511 "session_id": "abc123",1075 "hookSpecificOutput": {

512 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",1076 "hookEventName": "SubagentStart",

513 "cwd": "/Users/...",1077 "additionalContext": "Follow security guidelines for this task"

514 "permission_mode": "default",1078 }

515 "hook_event_name": "Notification",

516 "message": "Claude needs your permission to use Bash",

517 "notification_type": "permission_prompt"

518}1079}

519```1080```

520 1081

521### UserPromptSubmit Input1082### SubagentStop

1083

1084Runs when a Claude Code subagent has finished responding. Matches on agent type, same values as SubagentStart.

1085

1086#### SubagentStop input

1087

1088In addition to the [common input fields](#common-input-fields), SubagentStop hooks receive `stop_hook_active`, `agent_id`, `agent_type`, and `agent_transcript_path`. The `agent_type` field is the value used for matcher filtering. The `transcript_path` is the main session's transcript, while `agent_transcript_path` is the subagent's own transcript stored in a nested `subagents/` folder.

522 1089

523```json theme={null}1090```json theme={null}

524{1091{

525 "session_id": "abc123",1092 "session_id": "abc123",

526 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",1093 "transcript_path": "~/.claude/projects/.../abc123.jsonl",

527 "cwd": "/Users/...",1094 "cwd": "/Users/...",

528 "permission_mode": "default",1095 "permission_mode": "default",

529 "hook_event_name": "UserPromptSubmit",1096 "hook_event_name": "SubagentStop",

530 "prompt": "Write a function to calculate the factorial of a number"1097 "stop_hook_active": false,

1098 "agent_id": "def456",

1099 "agent_type": "Explore",

1100 "agent_transcript_path": "~/.claude/projects/.../abc123/subagents/agent-def456.jsonl"

531}1101}

532```1102```

533 1103

534### Stop and SubagentStop Input1104SubagentStop hooks use the same decision control format as [Stop hooks](#stop-decision-control).

1105

1106### Stop

1107

1108Runs when the main Claude Code agent has finished responding. Does not run if

1109the stoppage occurred due to a user interrupt.

535 1110

536`stop_hook_active` is true when Claude Code is already continuing as a result of1111#### Stop input

537a stop hook. Check this value or process the transcript to prevent Claude Code1112

538from running indefinitely.1113In addition to the [common input fields](#common-input-fields), Stop hooks receive `stop_hook_active`. This field is `true` when Claude Code is already continuing as a result of a stop hook. Check this value or process the transcript to prevent Claude Code from running indefinitely.

539 1114

540```json theme={null}1115```json theme={null}

541{1116{

542 "session_id": "abc123",1117 "session_id": "abc123",

543 "transcript_path": "~/.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",1118 "transcript_path": "~/.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",

1119 "cwd": "/Users/...",

544 "permission_mode": "default",1120 "permission_mode": "default",

545 "hook_event_name": "Stop",1121 "hook_event_name": "Stop",

546 "stop_hook_active": true1122 "stop_hook_active": true

547}1123}

548```1124```

549 1125

550### PreCompact Input1126#### Stop decision control

551 1127

552For `manual`, `custom_instructions` comes from what the user passes into1128`Stop` and `SubagentStop` hooks can control whether Claude continues. In addition to the [JSON output fields](#json-output) available to all hooks, your hook script can return these event-specific fields:

553`/compact`. For `auto`, `custom_instructions` is empty.1129

1130| Field | Description |

1131| :--------- | :------------------------------------------------------------------------- |

1132| `decision` | `"block"` prevents Claude from stopping. Omit to allow Claude to stop |

1133| `reason` | Required when `decision` is `"block"`. Tells Claude why it should continue |

554 1134

555```json theme={null}1135```json theme={null}

556{1136{

557 "session_id": "abc123",1137 "decision": "block",

558 "transcript_path": "~/.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",1138 "reason": "Must be provided when Claude is blocked from stopping"

559 "permission_mode": "default",

560 "hook_event_name": "PreCompact",

561 "trigger": "manual",

562 "custom_instructions": ""

563}1139}

564```1140```

565 1141

566### SessionStart Input1142### TeammateIdle

567 1143

568```json theme={null}1144Runs when an [agent team](/en/agent-teams) teammate is about to go idle after finishing its turn. Use this to enforce quality gates before a teammate stops working, such as requiring passing lint checks or verifying that output files exist.

569{1145

570 "session_id": "abc123",1146When a `TeammateIdle` hook exits with code 2, the teammate receives the stderr message as feedback and continues working instead of going idle. TeammateIdle hooks do not support matchers and fire on every occurrence.

571 "transcript_path": "~/.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",

572 "permission_mode": "default",

573 "hook_event_name": "SessionStart",

574 "source": "startup"

575}

576```

577 1147

578### SessionEnd Input1148#### TeammateIdle input

1149

1150In addition to the [common input fields](#common-input-fields), TeammateIdle hooks receive `teammate_name` and `team_name`.

579 1151

580```json theme={null}1152```json theme={null}

581{1153{

582 "session_id": "abc123",1154 "session_id": "abc123",

583 "transcript_path": "~/.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",1155 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",

584 "cwd": "/Users/...",1156 "cwd": "/Users/...",

585 "permission_mode": "default",1157 "permission_mode": "default",

586 "hook_event_name": "SessionEnd",1158 "hook_event_name": "TeammateIdle",

587 "reason": "exit"1159 "teammate_name": "researcher",

1160 "team_name": "my-project"

588}1161}

589```1162```

590 1163

591## Hook Output1164| Field | Description |

~~592~~ 1165| :-------------- | :-------------------------------------------- |

593There are two mutually exclusive ways for hooks to return output back to Claude Code. The output1166| `teammate_name` | Name of the teammate that is about to go idle |

594communicates whether to block and any feedback that should be shown to Claude1167| `team_name` | Name of the team |

595and the user.

~~596~~

597### Simple: Exit Code

598 1168

599Hooks communicate status through exit codes, stdout, and stderr:1169#### TeammateIdle decision control

600 1170

601* **Exit code 0**: Success. `stdout` is shown to the user in verbose mode1171TeammateIdle hooks use exit codes only, not JSON decision control. This example checks that a build artifact exists before allowing a teammate to go idle:

602 (ctrl+o), except for `UserPromptSubmit` and `SessionStart`, where stdout is

603 added to the context. JSON output in `stdout` is parsed for structured control

604 (see [Advanced: JSON Output](#advanced-json-output)).

605* **Exit code 2**: Blocking error. Only `stderr` is used as the error message

606 and fed back to Claude. The format is `[command]: {stderr}`. JSON in `stdout`

607 is **not** processed for exit code 2. See per-hook-event behavior below.

608* **Other exit codes**: Non-blocking error. `stderr` is shown to the user in verbose mode (ctrl+o) with

609 format `Failed with non-blocking status code: {stderr}`. If `stderr` is empty,

610 it shows `No stderr output`. Execution continues.

611 1172

612<Warning>1173```bash theme={null}

613 Reminder: Claude Code does not see stdout if the exit code is 0, except for1174#!/bin/bash

614 the `UserPromptSubmit` hook where stdout is injected as context.

615</Warning>

616 1175

617#### Exit Code 2 Behavior1176if [ ! -f "./dist/output.js" ]; then

1177 echo "Build artifact missing. Run the build before stopping." >&2

1178 exit 2

1179fi

618 1180

619| Hook Event | Behavior |1181exit 0

620| ------------------- | ------------------------------------------------------------------ |1182```

621| `PreToolUse` | Blocks the tool call, shows stderr to Claude |

622| `PermissionRequest` | Denies the permission, shows stderr to Claude |

623| `PostToolUse` | Shows stderr to Claude (tool already ran) |

624| `Notification` | N/A, shows stderr to user only |

625| `UserPromptSubmit` | Blocks prompt processing, erases prompt, shows stderr to user only |

626| `Stop` | Blocks stoppage, shows stderr to Claude |

627| `SubagentStop` | Blocks stoppage, shows stderr to Claude subagent |

628| `PreCompact` | N/A, shows stderr to user only |

629| `SessionStart` | N/A, shows stderr to user only |

630| `SessionEnd` | N/A, shows stderr to user only |

631 1183

632### Advanced: JSON Output1184### TaskCompleted

633 1185

634Hooks can return structured JSON in `stdout` for more sophisticated control.1186Runs when a task is being marked as completed. This fires in two situations: when any agent explicitly marks a task as completed through the TaskUpdate tool, or when an [agent team](/en/agent-teams) teammate finishes its turn with in-progress tasks. Use this to enforce completion criteria like passing tests or lint checks before a task can close.

635 1187

636<Warning>1188When a `TaskCompleted` hook exits with code 2, the task is not marked as completed and the stderr message is fed back to the model as feedback. TaskCompleted hooks do not support matchers and fire on every occurrence.

637 JSON output is only processed when the hook exits with code 0. If your hook

638 exits with code 2 (blocking error), `stderr` text is used directly—any JSON in `stdout`

639 is ignored. For other non-zero exit codes, only `stderr` is shown to the user in verbose mode (ctrl+o).

640</Warning>

641 1189

642#### Common JSON Fields1190#### TaskCompleted input

643 1191

644All hook types can include these optional fields:1192In addition to the [common input fields](#common-input-fields), TaskCompleted hooks receive `task_id`, `task_subject`, and optionally `task_description`, `teammate_name`, and `team_name`.

645 1193

646```json theme={null}1194```json theme={null}

647{1195{

648 "continue": true, // Whether Claude should continue after hook execution (default: true)1196 "session_id": "abc123",

649 "stopReason": "string", // Message shown when continue is false1197 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",

~~650~~ 1198 "cwd": "/Users/...",

651 "suppressOutput": true, // Hide stdout from transcript mode (default: false)1199 "permission_mode": "default",

652 "systemMessage": "string" // Optional warning message shown to the user1200 "hook_event_name": "TaskCompleted",

1201 "task_id": "task-001",

1202 "task_subject": "Implement user authentication",

1203 "task_description": "Add login and signup endpoints",

1204 "teammate_name": "implementer",

1205 "team_name": "my-project"

653}1206}

654```1207```

655 1208

656If `continue` is false, Claude stops processing after the hooks run.1209| Field | Description |

1210| :----------------- | :------------------------------------------------------ |

1211| `task_id` | Identifier of the task being completed |

1212| `task_subject` | Title of the task |

1213| `task_description` | Detailed description of the task. May be absent |

1214| `teammate_name` | Name of the teammate completing the task. May be absent |

1215| `team_name` | Name of the team. May be absent |

657 1216

658* For `PreToolUse`, this is different from `"permissionDecision": "deny"`, which1217#### TaskCompleted decision control

659 only blocks a specific tool call and provides automatic feedback to Claude.

660* For `PostToolUse`, this is different from `"decision": "block"`, which

661 provides automated feedback to Claude.

662* For `UserPromptSubmit`, this prevents the prompt from being processed.

663* For `Stop` and `SubagentStop`, this takes precedence over any

664 `"decision": "block"` output.

665* In all cases, `"continue" = false` takes precedence over any

666 `"decision": "block"` output.

667 1218

668`stopReason` accompanies `continue` with a reason shown to the user, not shown1219TaskCompleted hooks use exit codes only, not JSON decision control. This example runs tests and blocks task completion if they fail:

669to Claude.

670 1220

671#### `PreToolUse` Decision Control1221```bash theme={null}

~~672~~ 1222#!/bin/bash

673`PreToolUse` hooks can control whether a tool call proceeds.1223INPUT=$(cat)

1224TASK_SUBJECT=$(echo "$INPUT" | jq -r '.task_subject')

674 1225

675* `"allow"` bypasses the permission system. `permissionDecisionReason` is shown1226# Run the test suite

676 to the user but not to Claude.1227if ! npm test 2>&1; then

677* `"deny"` prevents the tool call from executing. `permissionDecisionReason` is1228 echo "Tests not passing. Fix failing tests before completing: $TASK_SUBJECT" >&2

678 shown to Claude.1229 exit 2

679* `"ask"` asks the user to confirm the tool call in the UI.1230fi

680 `permissionDecisionReason` is shown to the user but not to Claude.

681 1231

682Additionally, hooks can modify tool inputs before execution using `updatedInput`:1232exit 0

1233```

683 1234

684* `updatedInput` allows you to modify the tool's input parameters before the tool executes.1235### PreCompact

685* This is most useful with `"permissionDecision": "allow"` to modify and approve tool calls.

686 1236

687```json theme={null}1237Runs before Claude Code is about to run a compact operation.

688{

689 "hookSpecificOutput": {

690 "hookEventName": "PreToolUse",

691 "permissionDecision": "allow"

692 "permissionDecisionReason": "My reason here",

693 "updatedInput": {

694 "field_to_modify": "new value"

695 }

696 }

697}

698```

699 1238

700<Note>1239The matcher value indicates whether compaction was triggered manually or automatically:

701 The `decision` and `reason` fields are deprecated for PreToolUse hooks.

702 Use `hookSpecificOutput.permissionDecision` and

703 `hookSpecificOutput.permissionDecisionReason` instead. The deprecated fields

704 `"approve"` and `"block"` map to `"allow"` and `"deny"` respectively.

705</Note>

706 1240

707#### `PermissionRequest` Decision Control1241| Matcher | When it fires |

1242| :------- | :------------------------------------------- |

1243| `manual` | `/compact` |

1244| `auto` | Auto-compact when the context window is full |

708 1245

709`PermissionRequest` hooks can allow or deny permission requests shown to the user.1246#### PreCompact input

710 1247

711* For `"behavior": "allow"` you can also optionally pass in an `"updatedInput"` that modifies the tool's input parameters before the tool executes.1248In addition to the [common input fields](#common-input-fields), PreCompact hooks receive `trigger` and `custom_instructions`. For `manual`, `custom_instructions` contains what the user passes into `/compact`. For `auto`, `custom_instructions` is empty.

712* For `"behavior": "deny"` you can also optionally pass in a `"message"` string that tells the model why the permission was denied, and a boolean `"interrupt"` which will stop Claude.

713 1249

714```json theme={null}1250```json theme={null}

715{1251{

716 "hookSpecificOutput": {1252 "session_id": "abc123",

717 "hookEventName": "PermissionRequest",1253 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",

718 "decision": {1254 "cwd": "/Users/...",

719 "behavior": "allow",1255 "permission_mode": "default",

720 "updatedInput": {1256 "hook_event_name": "PreCompact",

721 "command": "npm run lint"1257 "trigger": "manual",

722 }1258 "custom_instructions": ""

723 }

724 }

725}1259}

726```1260```

727 1261

728#### `PostToolUse` Decision Control1262### SessionEnd

1263

1264Runs when a Claude Code session ends. Useful for cleanup tasks, logging session

1265statistics, or saving session state. Supports matchers to filter by exit reason.

1266

1267The `reason` field in the hook input indicates why the session ended:

1268

1269| Reason | Description |

1270| :---------------------------- | :----------------------------------------- |

1271| `clear` | Session cleared with `/clear` command |

1272| `logout` | User logged out |

1273| `prompt_input_exit` | User exited while prompt input was visible |

1274| `bypass_permissions_disabled` | Bypass permissions mode was disabled |

1275| `other` | Other exit reasons |

729 1276

730`PostToolUse` hooks can provide feedback to Claude after tool execution.1277#### SessionEnd input

731 1278

732* `"block"` automatically prompts Claude with `reason`.1279In addition to the [common input fields](#common-input-fields), SessionEnd hooks receive a `reason` field indicating why the session ended. See the [reason table](#sessionend) above for all values.

733* `undefined` does nothing. `reason` is ignored.

734* `"hookSpecificOutput.additionalContext"` adds context for Claude to consider.

735 1280

736```json theme={null}1281```json theme={null}

737{1282{

738 "decision": "block" | undefined,1283 "session_id": "abc123",

739 "reason": "Explanation for decision",1284 "transcript_path": "/Users/.../.claude/projects/.../00893aaf-19fa-41d2-8238-13269b9b3ca0.jsonl",

740 "hookSpecificOutput": {1285 "cwd": "/Users/...",

741 "hookEventName": "PostToolUse",1286 "permission_mode": "default",

742 "additionalContext": "Additional information for Claude"1287 "hook_event_name": "SessionEnd",

743 }1288 "reason": "other"

744}1289}

745```1290```

746 1291

747#### `UserPromptSubmit` Decision Control1292SessionEnd hooks have no decision control. They cannot block session termination but can perform cleanup tasks.

748 1293

749`UserPromptSubmit` hooks can control whether a user prompt is processed and add context.1294## Prompt-based hooks

750 1295

751**Adding context (exit code 0):**1296In addition to Bash command hooks (`type: "command"`), Claude Code supports prompt-based hooks (`type: "prompt"`) that use an LLM to evaluate whether to allow or block an action. Prompt-based hooks work with the following events: `PreToolUse`, `PostToolUse`, `PostToolUseFailure`, `PermissionRequest`, `UserPromptSubmit`, `Stop`, `SubagentStop`, and `TaskCompleted`. `TeammateIdle` does not support prompt-based or agent-based hooks.

752There are two ways to add context to the conversation:1297

1298### How prompt-based hooks work

753 1299

7541. **Plain text stdout** (simpler): Any non-JSON text written to stdout is added1300Instead of executing a Bash command, prompt-based hooks:

755 as context. This is the easiest way to inject information.

756 1301

7572. **JSON with `additionalContext`** (structured): Use the JSON format below for13021. Send the hook input and your prompt to a Claude model, Haiku by default

758 more control. The `additionalContext` field is added as context.13032. The LLM responds with structured JSON containing a decision

13043. Claude Code processes the decision automatically

759 1305

760Both methods work with exit code 0. Plain stdout is shown as hook output in1306### Prompt hook configuration

761the transcript; `additionalContext` is added more discretely.

762 1307

763**Blocking prompts:**1308Set `type` to `"prompt"` and provide a `prompt` string instead of a `command`. Use the `$ARGUMENTS` placeholder to inject the hook's JSON input data into your prompt text. Claude Code sends the combined prompt and input to a fast Claude model, which returns a JSON decision.

764 1309

765* `"decision": "block"` prevents the prompt from being processed. The submitted1310This `Stop` hook asks the LLM to evaluate whether all tasks are complete before allowing Claude to finish:

766 prompt is erased from context. `"reason"` is shown to the user but not added

767 to context.

768* `"decision": undefined` (or omitted) allows the prompt to proceed normally.

769 1311

770```json theme={null}1312```json theme={null}

771{1313{

772 "decision": "block" | undefined,1314 "hooks": {

773 "reason": "Explanation for decision",1315 "Stop": [

774 "hookSpecificOutput": {1316 {

775 "hookEventName": "UserPromptSubmit",1317 "hooks": [

776 "additionalContext": "My additional context here"1318 {

1319 "type": "prompt",

1320 "prompt": "Evaluate if Claude should stop: $ARGUMENTS. Check if all tasks are complete."

1321 }

1322 ]

1323 }

1324 ]

777 }1325 }

778}1326}

779```1327```

780 1328

781<Note>1329| Field | Required | Description |

782 The JSON format isn't required for simple use cases. To add context, you can print plain text to stdout with exit code 0. Use JSON when you need to1330| :-------- | :------- | :------------------------------------------------------------------------------------------------------------------------------------------------------------------ |

783 block prompts or want more structured control.1331| `type` | yes | Must be `"prompt"` |

784</Note>1332| `prompt` | yes | The prompt text to send to the LLM. Use `$ARGUMENTS` as a placeholder for the hook input JSON. If `$ARGUMENTS` is not present, input JSON is appended to the prompt |

~~785~~ 1333| `model` | no | Model to use for evaluation. Defaults to a fast model |

786#### `Stop`/`SubagentStop` Decision Control1334| `timeout` | no | Timeout in seconds. Default: 30 |

787 1335

788`Stop` and `SubagentStop` hooks can control whether Claude must continue.1336### Response schema

789 1337

790* `"block"` prevents Claude from stopping. You must populate `reason` for Claude1338The LLM must respond with JSON containing:

791 to know how to proceed.

792* `undefined` allows Claude to stop. `reason` is ignored.

793 1339

794```json theme={null}1340```json theme={null}

795{1341{

796 "decision": "block" | undefined,1342 "ok": true | false,

797 "reason": "Must be provided when Claude is blocked from stopping"1343 "reason": "Explanation for the decision"

798}1344}

799```1345```

800 1346

801#### `SessionStart` Decision Control1347| Field | Description |

1348| :------- | :--------------------------------------------------------- |

1349| `ok` | `true` allows the action, `false` prevents it |

1350| `reason` | Required when `ok` is `false`. Explanation shown to Claude |

802 1351

803`SessionStart` hooks allow you to load in context at the start of a session.1352### Example: Multi-criteria Stop hook

804 1353

805* `"hookSpecificOutput.additionalContext"` adds the string to the context.1354This `Stop` hook uses a detailed prompt to check three conditions before allowing Claude to stop. If `"ok"` is `false`, Claude continues working with the provided reason as its next instruction. `SubagentStop` hooks use the same format to evaluate whether a [subagent](/en/sub-agents) should stop:

806* Multiple hooks' `additionalContext` values are concatenated.

807 1355

808```json theme={null}1356```json theme={null}

809{1357{

810 "hookSpecificOutput": {1358 "hooks": {

811 "hookEventName": "SessionStart",1359 "Stop": [

812 "additionalContext": "My additional context here"1360 {

1361 "hooks": [

1362 {

1363 "type": "prompt",

1364 "prompt": "You are evaluating whether Claude should stop working. Context: $ARGUMENTS\n\nAnalyze the conversation and determine if:\n1. All user-requested tasks are complete\n2. Any errors need to be addressed\n3. Follow-up work is needed\n\nRespond with JSON: {\"ok\": true} to allow stopping, or {\"ok\": false, \"reason\": \"your explanation\"} to continue working.",

1365 "timeout": 30

1366 }

1367 ]

1368 }

1369 ]

813 }1370 }

814}1371}

815```1372```

816 1373

817#### `SessionEnd` Decision Control1374## Agent-based hooks

~~818~~

819`SessionEnd` hooks run when a session ends. They cannot block session termination

820but can perform cleanup tasks.

~~821~~

822#### Exit Code Example: Bash Command Validation

~~823~~

824```python theme={null}

825#!/usr/bin/env python3

826import json

827import re

828import sys

~~829~~

830# Define validation rules as a list of (regex pattern, message) tuples

831VALIDATION_RULES = [

832 (

833 r"\bgrep\b(?!.*\|)",

834 "Use 'rg' (ripgrep) instead of 'grep' for better performance and features",

835 ),

836 (

837 r"\bfind\s+\S+\s+-name\b",

838 "Use 'rg --files | rg pattern' or 'rg --files -g pattern' instead of 'find -name' for better performance",

839 ),

840]

~~841~~

~~842~~

843def validate_command(command: str) -> list[str]:

844 issues = []

845 for pattern, message in VALIDATION_RULES:

846 if re.search(pattern, command):

847 issues.append(message)

848 return issues

~~849~~

~~850~~

851try:

852 input_data = json.load(sys.stdin)

853except json.JSONDecodeError as e:

854 print(f"Error: Invalid JSON input: {e}", file=sys.stderr)

855 sys.exit(1)

~~856~~

857tool_name = input_data.get("tool_name", "")

858tool_input = input_data.get("tool_input", {})

859command = tool_input.get("command", "")

~~860~~

861if tool_name != "Bash" or not command:

862 sys.exit(1)

~~863~~

864# Validate the command

865issues = validate_command(command)

~~866~~

867if issues:

868 for message in issues:

869 print(f"• {message}", file=sys.stderr)

870 # Exit code 2 blocks tool call and shows stderr to Claude

871 sys.exit(2)

872```

~~873~~

874#### JSON Output Example: UserPromptSubmit to Add Context and Validation

875 1375

876<Note>1376Agent-based hooks (`type: "agent"`) are like prompt-based hooks but with multi-turn tool access. Instead of a single LLM call, an agent hook spawns a subagent that can read files, search code, and inspect the codebase to verify conditions. Agent hooks support the same events as prompt-based hooks.

877 For `UserPromptSubmit` hooks, you can inject context using either method:

878 1377

879 * **Plain text stdout** with exit code 0: Simplest approach, prints text1378### How agent hooks work

880 * **JSON output** with exit code 0: Use `"decision": "block"` to reject prompts,

881 or `additionalContext` for structured context injection

882 1379

883 Remember: Exit code 2 only uses `stderr` for the error message. To block using1380When an agent hook fires:

884 JSON (with a custom reason), use `"decision": "block"` with exit code 0.

885</Note>

886 1381

887```python theme={null}13821. Claude Code spawns a subagent with your prompt and the hook's JSON input

888#!/usr/bin/env python313832. The subagent can use tools like Read, Grep, and Glob to investigate

889import json13843. After up to 50 turns, the subagent returns a structured `{ "ok": true/false }` decision

890import sys13854. Claude Code processes the decision the same way as a prompt hook

891import re

892import datetime

~~893~~

894# Load input from stdin

895try:

896 input_data = json.load(sys.stdin)

897except json.JSONDecodeError as e:

898 print(f"Error: Invalid JSON input: {e}", file=sys.stderr)

899 sys.exit(1)

~~900~~

901prompt = input_data.get("prompt", "")

~~902~~

903# Check for sensitive patterns

904sensitive_patterns = [

905 (r"(?i)\b(password|secret|key|token)\s*[:=]", "Prompt contains potential secrets"),

906]

~~907~~

908for pattern, message in sensitive_patterns:

909 if re.search(pattern, prompt):

910 # Use JSON output to block with a specific reason

911 output = {

912 "decision": "block",

913 "reason": f"Security policy violation: {message}. Please rephrase your request without sensitive information."

914 }

915 print(json.dumps(output))

916 sys.exit(0)

917 1386

918# Add current time to context1387Agent hooks are useful when verification requires inspecting actual files or test output, not just evaluating the hook input data alone.

919context = f"Current time: {datetime.datetime.now()}"

920print(context)

921 1388

922"""1389### Agent hook configuration

923The following is also equivalent:

924print(json.dumps({

925 "hookSpecificOutput": {

926 "hookEventName": "UserPromptSubmit",

927 "additionalContext": context,

928 },

929}))

930"""

931 1390

932# Allow the prompt to proceed with the additional context1391Set `type` to `"agent"` and provide a `prompt` string. The configuration fields are the same as [prompt hooks](#prompt-hook-configuration), with a longer default timeout:

933sys.exit(0)

934```

935 1392

936#### JSON Output Example: PreToolUse with Approval1393| Field | Required | Description |

~~937~~ 1394| :-------- | :------- | :------------------------------------------------------------------------------------------ |

938```python theme={null}1395| `type` | yes | Must be `"agent"` |

939#!/usr/bin/env python31396| `prompt` | yes | Prompt describing what to verify. Use `$ARGUMENTS` as a placeholder for the hook input JSON |

940import json1397| `model` | no | Model to use. Defaults to a fast model |

941import sys1398| `timeout` | no | Timeout in seconds. Default: 60 |

~~942~~

943# Load input from stdin

944try:

945 input_data = json.load(sys.stdin)

946except json.JSONDecodeError as e:

947 print(f"Error: Invalid JSON input: {e}", file=sys.stderr)

948 sys.exit(1)

~~949~~

950tool_name = input_data.get("tool_name", "")

951tool_input = input_data.get("tool_input", {})

~~952~~

953# Example: Auto-approve file reads for documentation files

954if tool_name == "Read":

955 file_path = tool_input.get("file_path", "")

956 if file_path.endswith((".md", ".mdx", ".txt", ".json")):

957 # Use JSON output to auto-approve the tool call

958 output = {

959 "decision": "approve",

960 "reason": "Documentation file auto-approved",

961 "suppressOutput": True # Don't show in verbose mode

962 }

963 print(json.dumps(output))

964 sys.exit(0)

965 1399

966# For other cases, let the normal permission flow proceed1400The response schema is the same as prompt hooks: `{ "ok": true }` to allow or `{ "ok": false, "reason": "..." }` to block.

967sys.exit(0)

968```

969 1401

970## Working with MCP Tools1402This `Stop` hook verifies that all unit tests pass before allowing Claude to finish:

971 1403

972Claude Code hooks work seamlessly with1404```json theme={null}

973[Model Context Protocol (MCP) tools](/en/mcp). When MCP servers1405{

974provide tools, they appear with a special naming pattern that you can match in1406 "hooks": {

975your hooks.1407 "Stop": [

1408 {

1409 "hooks": [

1410 {

1411 "type": "agent",

1412 "prompt": "Verify that all unit tests pass. Run the test suite and check the results. $ARGUMENTS",

1413 "timeout": 120

1414 }

1415 ]

1416 }

1417 ]

1418 }

1419}

1420```

976 1421

977### MCP Tool Naming1422## Run hooks in the background

978 1423

979MCP tools follow the pattern `mcp__<server>__<tool>`, for example:1424By default, hooks block Claude's execution until they complete. For long-running tasks like deployments, test suites, or external API calls, set `"async": true` to run the hook in the background while Claude continues working. Async hooks cannot block or control Claude's behavior: response fields like `decision`, `permissionDecision`, and `continue` have no effect, because the action they would have controlled has already completed.

980 1425

981* `mcp__memory__create_entities` - Memory server's create entities tool1426### Configure an async hook

982* `mcp__filesystem__read_file` - Filesystem server's read file tool

983* `mcp__github__search_repositories` - GitHub server's search tool

984 1427

985### Configuring Hooks for MCP Tools1428Add `"async": true` to a command hook's configuration to run it in the background without blocking Claude. This field is only available on `type: "command"` hooks.

986 1429

987You can target specific MCP tools or entire MCP servers:1430This hook runs a test script after every `Write` tool call. Claude continues working immediately while `run-tests.sh` executes for up to 120 seconds. When the script finishes, its output is delivered on the next conversation turn:

988 1431

989```json theme={null}1432```json theme={null}

990{1433{

991 "hooks": {1434 "hooks": {

992 "PreToolUse": [1435 "PostToolUse": [

993 {

994 "matcher": "mcp__memory__.*",

995 "hooks": [

996 {

997 "type": "command",

998 "command": "echo 'Memory operation initiated' >> ~/mcp-operations.log"

999 }

1000 ]

1001 },

1002 {1436 {

1003 "matcher": "mcp__.*__write.*",1437 "matcher": "Write",

1004 "hooks": [1438 "hooks": [

1005 {1439 {

1006 "type": "command",1440 "type": "command",

1007 "command": "/home/user/scripts/validate-mcp-write.py"1441 "command": "/path/to/run-tests.sh",

1442 "async": true,

1443 "timeout": 120

1008 }1444 }

1009 ]1445 ]

1010 }1446 }

1013}1449}

1014```1450```

1015 1451

1016## Examples1452The `timeout` field sets the maximum time in seconds for the background process. If not specified, async hooks use the same 10-minute default as sync hooks.

~~1017~~

1018<Tip>

1019 For practical examples including code formatting, notifications, and file protection, see [More Examples](/en/hooks-guide#more-examples) in the get started guide.

1020</Tip>

~~1021~~

1022## Security Considerations

1023 1453

1024### Disclaimer1454### How async hooks execute

1025 1455

1026**USE AT YOUR OWN RISK**: Claude Code hooks execute arbitrary shell commands on1456When an async hook fires, Claude Code starts the hook process and immediately continues without waiting for it to finish. The hook receives the same JSON input via stdin as a synchronous hook.

1027your system automatically. By using hooks, you acknowledge that:

1028 1457

1029* You are solely responsible for the commands you configure1458After the background process exits, if the hook produced a JSON response with a `systemMessage` or `additionalContext` field, that content is delivered to Claude as context on the next conversation turn.

1030* Hooks can modify, delete, or access any files your user account can access

1031* Malicious or poorly written hooks can cause data loss or system damage

1032* Anthropic provides no warranty and assumes no liability for any damages

1033 resulting from hook usage

1034* You should thoroughly test hooks in a safe environment before production use

1035 1459

1036Always review and understand any hook commands before adding them to your1460### Example: run tests after file changes

1037configuration.

1038 1461

1039### Security Best Practices1462This hook starts a test suite in the background whenever Claude writes a file, then reports the results back to Claude when the tests finish. Save this script to `.claude/hooks/run-tests-async.sh` in your project and make it executable with `chmod +x`:

1040 1463

1041Here are some key practices for writing more secure hooks:1464```bash theme={null}

1465#!/bin/bash

1466# run-tests-async.sh

1042 1467

10431. **Validate and sanitize inputs** - Never trust input data blindly1468# Read hook input from stdin

10442. **Always quote shell variables** - Use `"$VAR"` not `$VAR`1469INPUT=$(cat)

10453. **Block path traversal** - Check for `..` in file paths1470FILE_PATH=$(echo "$INPUT" | jq -r '.tool_input.file_path // empty')

10464. **Use absolute paths** - Specify full paths for scripts (use

1047 "\$CLAUDE\_PROJECT\_DIR" for the project path)

10485. **Skip sensitive files** - Avoid `.env`, `.git/`, keys, etc.

1049 1471

1050### Configuration Safety1472# Only run tests for source files

1473if [[ "$FILE_PATH" != *.ts && "$FILE_PATH" != *.js ]]; then

1474 exit 0

1475fi

1051 1476

1052Direct edits to hooks in settings files don't take effect immediately. Claude1477# Run tests and report results via systemMessage

1053Code:1478RESULT=$(npm test 2>&1)

1479EXIT_CODE=$?

1054 1480

10551. Captures a snapshot of hooks at startup1481if [ $EXIT_CODE -eq 0 ]; then

10562. Uses this snapshot throughout the session1482 echo "{\"systemMessage\": \"Tests passed after editing $FILE_PATH\"}"

10573. Warns if hooks are modified externally1483else

10584. Requires review in `/hooks` menu for changes to apply1484 echo "{\"systemMessage\": \"Tests failed after editing $FILE_PATH: $RESULT\"}"

1485fi

1486```

1059 1487

1060This prevents malicious hook modifications from affecting your current session.1488Then add this configuration to `.claude/settings.json` in your project root. The `async: true` flag lets Claude keep working while tests run:

1061 1489

1062## Hook Execution Details1490```json theme={null}

1491{

1492 "hooks": {

1493 "PostToolUse": [

1494 {

1495 "matcher": "Write|Edit",

1496 "hooks": [

1497 {

1498 "type": "command",

1499 "command": "\"$CLAUDE_PROJECT_DIR\"/.claude/hooks/run-tests-async.sh",

1500 "async": true,

1501 "timeout": 300

1502 }

1503 ]

1504 }

1505 ]

1506 }

1507}

1508```

1063 1509

1064* **Timeout**: 60-second execution limit by default, configurable per command.1510### Limitations

1065 * A timeout for an individual command does not affect the other commands.

1066* **Parallelization**: All matching hooks run in parallel

1067* **Deduplication**: Multiple identical hook commands are deduplicated automatically

1068* **Environment**: Runs in current directory with Claude Code's environment

1069 * The `CLAUDE_PROJECT_DIR` environment variable is available and contains the

1070 absolute path to the project root directory (where Claude Code was started)

1071 * The `CLAUDE_CODE_REMOTE` environment variable indicates whether the hook is running in a remote (web) environment (`"true"`) or local CLI environment (not set or empty). Use this to run different logic based on execution context.

1072* **Input**: JSON via stdin

1073* **Output**:

1074 * PreToolUse/PermissionRequest/PostToolUse/Stop/SubagentStop: Progress shown in verbose mode (ctrl+o)

1075 * Notification/SessionEnd: Logged to debug only (`--debug`)

1076 * UserPromptSubmit/SessionStart: stdout added as context for Claude

1077 1511

1078## Debugging1512Async hooks have several constraints compared to synchronous hooks:

1079 1513

1080### Basic Troubleshooting1514* Only `type: "command"` hooks support `async`. Prompt-based hooks cannot run asynchronously.

1515* Async hooks cannot block tool calls or return decisions. By the time the hook completes, the triggering action has already proceeded.

1516* Hook output is delivered on the next conversation turn. If the session is idle, the response waits until the next user interaction.

1517* Each execution creates a separate background process. There is no deduplication across multiple firings of the same async hook.

1081 1518

1082If your hooks aren't working:1519## Security considerations

1083 1520

10841. **Check configuration** - Run `/hooks` to see if your hook is registered1521### Disclaimer

10852. **Verify syntax** - Ensure your JSON settings are valid

10863. **Test commands** - Run hook commands manually first

10874. **Check permissions** - Make sure scripts are executable

10885. **Review logs** - Use `claude --debug` to see hook execution details

1089 1522

1090Common issues:1523Hooks run with your system user's full permissions.

1091 1524

1092* **Quotes not escaped** - Use `\"` inside JSON strings1525<Warning>

1093* **Wrong matcher** - Check tool names match exactly (case-sensitive)1526 Hooks execute shell commands with your full user permissions. They can modify, delete, or access any files your user account can access. Review and test all hook commands before adding them to your configuration.

1094* **Command not found** - Use full paths for scripts1527</Warning>

1095 1528

1096### Advanced Debugging1529### Security best practices

1097 1530

1098For complex hook issues:1531Keep these practices in mind when writing hooks:

1099 1532

11001. **Inspect hook execution** - Use `claude --debug` to see detailed hook1533* **Validate and sanitize inputs**: never trust input data blindly

1101 execution1534* **Always quote shell variables**: use `"$VAR"` not `$VAR`

11022. **Validate JSON schemas** - Test hook input/output with external tools1535* **Block path traversal**: check for `..` in file paths

11033. **Check environment variables** - Verify Claude Code's environment is correct1536* **Use absolute paths**: specify full paths for scripts, using `"$CLAUDE_PROJECT_DIR"` for the project root

11044. **Test edge cases** - Try hooks with unusual file paths or inputs1537* **Skip sensitive files**: avoid `.env`, `.git/`, keys, etc.

11055. **Monitor system resources** - Check for resource exhaustion during hook

1106 execution

11076. **Use structured logging** - Implement logging in your hook scripts

1108 1538

1109### Debug Output Example1539## Debug hooks

1110 1540

1111Use `claude --debug` to see hook execution details:1541Run `claude --debug` to see hook execution details, including which hooks matched, their exit codes, and output. Toggle verbose mode with `Ctrl+O` to see hook progress in the transcript.

1112 1542

1113```1543```

1114[DEBUG] Executing hooks for PostToolUse:Write1544[DEBUG] Executing hooks for PostToolUse:Write

1116[DEBUG] Found 1 hook matchers in settings1546[DEBUG] Found 1 hook matchers in settings

1117[DEBUG] Matched 1 hooks for query "Write"1547[DEBUG] Matched 1 hooks for query "Write"

1118[DEBUG] Found 1 hook commands to execute1548[DEBUG] Found 1 hook commands to execute

1119[DEBUG] Executing hook command: <Your command> with timeout 60000ms1549[DEBUG] Executing hook command: <Your command> with timeout 600000ms

1120[DEBUG] Hook command completed with status 0: <Your stdout>1550[DEBUG] Hook command completed with status 0: <Your stdout>

1121```1551```

1122 1552

1123Progress messages appear in verbose mode (ctrl+o) showing:1553For troubleshooting common issues like hooks not firing, infinite Stop hook loops, or configuration errors, see [Limitations and troubleshooting](/en/hooks-guide#limitations-and-troubleshooting) in the guide.

~~1124~~

1125* Which hook is running

1126* Command being executed

1127* Success/failure status

1128* Output or error messages

~~1129~~

~~1130~~

~~1131~~

1132> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

hooks-guide.md +502 −206

Details

~~1# Get started with Claude Code hooks~~1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

2 4

~~3> Learn how to customize and extend Claude Code's behavior by registering shell commands~~5# Automate workflows with hooks

4 6

~~5Claude Code hooks are user-defined shell commands that execute at various points~~7> Run shell commands automatically when Claude Code edits files, finishes tasks, or needs input. Format code, send notifications, validate commands, and enforce project rules.

~~6in Claude Code's lifecycle. Hooks provide deterministic control over Claude~~8

~~7Code's behavior, ensuring certain actions always happen rather than relying on~~9Hooks are user-defined shell commands that execute at specific points in Claude Code's lifecycle. They provide deterministic control over Claude Code's behavior, ensuring certain actions always happen rather than relying on the LLM to choose to run them. Use hooks to enforce project rules, automate repetitive tasks, and integrate Claude Code with your existing tools.

~~8the LLM to choose to run them.~~10

11For decisions that require judgment rather than deterministic rules, you can also use [prompt-based hooks](#prompt-based-hooks) or [agent-based hooks](#agent-based-hooks) that use a Claude model to evaluate conditions.

13For other ways to extend Claude Code, see [skills](/en/skills) for giving Claude additional instructions and executable commands, [subagents](/en/sub-agents) for running tasks in isolated contexts, and [plugins](/en/plugins) for packaging extensions to share across projects.

9 14

10<Tip>15<Tip>

~~11 For reference documentation on hooks, see [Hooks reference](/en/hooks).~~16 This guide covers common use cases and how to get started. For full event schemas, JSON input/output formats, and advanced features like async hooks and MCP tool hooks, see the [Hooks reference](/en/hooks).

12</Tip>17</Tip>

13 18

~~14Example use cases for hooks include:~~19## Set up your first hook

15 20

~~16* **Notifications**: Customize how you get notified when Claude Code is awaiting~~21The fastest way to create a hook is through the `/hooks` interactive menu in Claude Code. This walkthrough creates a desktop notification hook, so you get alerted whenever Claude is waiting for your input instead of watching the terminal.

~~17 your input or permission to run something.~~

~~18* **Automatic formatting**: Run `prettier` on .ts files, `gofmt` on .go files,~~

~~19 etc. after every file edit.~~

~~20* **Logging**: Track and count all executed commands for compliance or~~

~~21 debugging.~~

~~22* **Feedback**: Provide automated feedback when Claude Code produces code that~~

~~23 does not follow your codebase conventions.~~

~~24* **Custom permissions**: Block modifications to production files or sensitive~~

~~25 directories.~~

26 22

~~27By encoding these rules as hooks rather than prompting instructions, you turn~~23<Steps>

~~28suggestions into app-level code that executes every time it is expected to run.~~24 <Step title="Open the hooks menu">

25 Type `/hooks` in the Claude Code CLI. You'll see a list of all available hook events, plus an option to disable all hooks. Each event corresponds to a point in Claude's lifecycle where you can run custom code. Select `Notification` to create a hook that fires when Claude needs your attention.

26 </Step>

29 27

~~30<Warning>~~28 <Step title="Configure the matcher">

~~31 You must consider the security implication of hooks as you add them, because hooks run automatically during the agent loop with your current environment's credentials.~~29 The menu shows a list of matchers, which filter when the hook fires. Set the matcher to `*` to fire on all notification types. You can narrow it later by changing the matcher to a specific value like `permission_prompt` or `idle_prompt`.

~~32 For example, malicious hooks code can exfiltrate your data. Always review your hooks implementation before registering them.~~30 </Step>

33 31

~~34 For full security best practices, see [Security Considerations](/en/hooks#security-considerations) in the hooks reference documentation.~~32 <Step title="Add your command">

~~35</Warning>~~33 Select `+ Add new hook…`. The menu prompts you for a shell command to run when the event fires. Hooks run any shell command you provide, so you can use your platform's built-in notification tool. Copy the command for your OS:

36 34

~~37## Hook Events Overview~~35 <Tabs>

36 <Tab title="macOS">

37 Uses [`osascript`](https://ss64.com/mac/osascript.html) to trigger a native macOS notification through AppleScript:

38 38

~~39Claude Code provides several hook events that run at different points in the~~39 ```

~~40workflow:~~40 osascript -e 'display notification "Claude Code needs your attention" with title "Claude Code"'

41 ```

42 </Tab>

41 43

~~42* **PreToolUse**: Runs before tool calls (can block them)~~44 <Tab title="Linux">

~~43* **PermissionRequest**: Runs when a permission dialog is shown (can allow or deny)~~45 Uses `notify-send`, which is pre-installed on most Linux desktops with a notification daemon:

~~44* **PostToolUse**: Runs after tool calls complete~~

~~45* **UserPromptSubmit**: Runs when the user submits a prompt, before Claude processes it~~

~~46* **Notification**: Runs when Claude Code sends notifications~~

~~47* **Stop**: Runs when Claude Code finishes responding~~

~~48* **SubagentStop**: Runs when subagent tasks complete~~

~~49* **PreCompact**: Runs before Claude Code is about to run a compact operation~~

~~50* **SessionStart**: Runs when Claude Code starts a new session or resumes an existing session~~

~~51* **SessionEnd**: Runs when Claude Code session ends~~

52 46

~~53Each event receives different data and can control Claude's behavior in~~47 ```

~~54different ways.~~48 notify-send 'Claude Code' 'Claude Code needs your attention'

49 ```

50 </Tab>

55 51

~~56## Quickstart~~52 <Tab title="Windows (PowerShell)">

53 Uses PowerShell to show a native message box through .NET's Windows Forms:

57 54

~~58In this quickstart, you'll add a hook that logs the shell commands that Claude~~55 ```

~~59Code runs.~~56 powershell.exe -Command "[System.Reflection.Assembly]::LoadWithPartialName('System.Windows.Forms'); [System.Windows.Forms.MessageBox]::Show('Claude Code needs your attention', 'Claude Code')"

57 ```

58 </Tab>

59 </Tabs>

60 </Step>

60 61

~~61### Prerequisites~~62 <Step title="Choose a storage location">

63 The menu asks where to save the hook configuration. Select `User settings` to store it in `~/.claude/settings.json`, which applies the hook to all your projects. You could also choose `Project settings` to scope it to the current project. See [Configure hook location](#configure-hook-location) for all available scopes.

64 </Step>

62 65

~~63Install `jq` for JSON processing in the command line.~~66 <Step title="Test the hook">

67 Press `Esc` to return to the CLI. Ask Claude to do something that requires permission, then switch away from the terminal. You should receive a desktop notification.

68 </Step>

69</Steps>

64 70

~~65### Step 1: Open hooks configuration~~71## What you can automate

66 72

~~67Run the `/hooks` [slash command](/en/slash-commands) and select~~73Hooks let you run code at key points in Claude Code's lifecycle: format files after edits, block commands before they execute, send notifications when Claude needs input, inject context at session start, and more. For the full list of hook events, see the [Hooks reference](/en/hooks#hook-lifecycle).

~~68the `PreToolUse` hook event.~~

69 74

~~70`PreToolUse` hooks run before tool calls and can block them while providing~~75Each example includes a ready-to-use configuration block that you add to a [settings file](#configure-hook-location). The most common patterns:

~~71Claude feedback on what to do differently.~~

72 76

~~73### Step 2: Add a matcher~~77* [Get notified when Claude needs input](#get-notified-when-claude-needs-input)

78* [Auto-format code after edits](#auto-format-code-after-edits)

79* [Block edits to protected files](#block-edits-to-protected-files)

80* [Re-inject context after compaction](#re-inject-context-after-compaction)

74 81

~~75Select `+ Add new matcher…` to run your hook only on Bash tool calls.~~82### Get notified when Claude needs input

76 83

~~77Type `Bash` for the matcher.~~84Get a desktop notification whenever Claude finishes working and needs your input, so you can switch to other tasks without checking the terminal.

78 85

~~79<Note>You can use `*` to match all tools.</Note>~~86This hook uses the `Notification` event, which fires when Claude is waiting for input or permission. Each tab below uses the platform's native notification command. Add this to `~/.claude/settings.json`, or use the [interactive walkthrough](#set-up-your-first-hook) above to configure it with `/hooks`:

80 87

~~81### Step 3: Add the hook~~88<Tabs>

89 <Tab title="macOS">

90 ```json theme={null}

91 {

92 "hooks": {

93 "Notification": [

94 {

95 "matcher": "",

96 "hooks": [

97 {

98 "type": "command",

99 "command": "osascript -e 'display notification \"Claude Code needs your attention\" with title \"Claude Code\"'"

100 }

101 ]

102 }

103 ]

104 }

105 }

106 ```

107 </Tab>

82 108

~~83Select `+ Add new hook…` and enter this command:~~109 <Tab title="Linux">

110 ```json theme={null}

111 {

112 "hooks": {

113 "Notification": [

114 {

115 "matcher": "",

116 "hooks": [

117 {

118 "type": "command",

119 "command": "notify-send 'Claude Code' 'Claude Code needs your attention'"

120 }

121 ]

122 }

123 ]

124 }

125 }

126 ```

127 </Tab>

84 128

~~85```bash theme={null}~~129 <Tab title="Windows (PowerShell)">

~~86jq -r '"\(.tool_input.command) - \(.tool_input.description // "No description")"' >> ~/.claude/bash-command-log.txt~~130 ```json theme={null}

131 {

132 "hooks": {

133 "Notification": [

134 {

135 "matcher": "",

136 "hooks": [

137 {

138 "type": "command",

139 "command": "powershell.exe -Command \"[System.Reflection.Assembly]::LoadWithPartialName('System.Windows.Forms'); [System.Windows.Forms.MessageBox]::Show('Claude Code needs your attention', 'Claude Code')\""

140 }

141 ]

142 }

143 ]

144 }

145 }

146 ```

147 </Tab>

148</Tabs>

149

150### Auto-format code after edits

151

152Automatically run [Prettier](https://prettier.io/) on every file Claude edits, so formatting stays consistent without manual intervention.

153

154This hook uses the `PostToolUse` event with an `Edit|Write` matcher, so it runs only after file-editing tools. The command extracts the edited file path with [`jq`](https://jqlang.github.io/jq/) and passes it to Prettier. Add this to `.claude/settings.json` in your project root:

155

156```json theme={null}

157{

158 "hooks": {

159 "PostToolUse": [

160 {

161 "matcher": "Edit|Write",

162 "hooks": [

163 {

164 "type": "command",

165 "command": "jq -r '.tool_input.file_path' | xargs npx prettier --write"

166 }

167 ]

168 }

169 ]

170 }

171}

87```172```

88 173

~~89### Step 4: Save your configuration~~174<Note>

175 The Bash examples on this page use `jq` for JSON parsing. Install it with `brew install jq` (macOS), `apt-get install jq` (Debian/Ubuntu), or see [`jq` downloads](https://jqlang.github.io/jq/download/).

176</Note>

177

178### Block edits to protected files

179

180Prevent Claude from modifying sensitive files like `.env`, `package-lock.json`, or anything in `.git/`. Claude receives feedback explaining why the edit was blocked, so it can adjust its approach.

90 181

~~91For storage location, select `User settings` since you're logging to your home~~182This example uses a separate script file that the hook calls. The script checks the target file path against a list of protected patterns and exits with code 2 to block the edit.

~~92directory. This hook will then apply to all projects, not just your current~~

~~93project.~~

94 183

~~95Then press `Esc` until you return to the REPL. Your hook is now registered.~~184<Steps>

185 <Step title="Create the hook script">

186 Save this to `.claude/hooks/protect-files.sh`:

96 187

~~97### Step 5: Verify your hook~~188 ```bash theme={null}

189 #!/bin/bash

190 # protect-files.sh

98 191

~~99Run `/hooks` again or check `~/.claude/settings.json` to see your configuration:~~192 INPUT=$(cat)

193 FILE_PATH=$(echo "$INPUT" | jq -r '.tool_input.file_path // empty')

194

195 PROTECTED_PATTERNS=(".env" "package-lock.json" ".git/")

196

197 for pattern in "${PROTECTED_PATTERNS[@]}"; do

198 if [[ "$FILE_PATH" == *"$pattern"* ]]; then

199 echo "Blocked: $FILE_PATH matches protected pattern '$pattern'" >&2

200 exit 2

201 fi

202 done

203

204 exit 0

205 ```

206 </Step>

207

208 <Step title="Make the script executable (macOS/Linux)">

209 Hook scripts must be executable for Claude Code to run them:

210

211 ```bash theme={null}

212 chmod +x .claude/hooks/protect-files.sh

213 ```

214 </Step>

215

216 <Step title="Register the hook">

217 Add a `PreToolUse` hook to `.claude/settings.json` that runs the script before any `Edit` or `Write` tool call:

218

219 ```json theme={null}

220 {

221 "hooks": {

222 "PreToolUse": [

223 {

224 "matcher": "Edit|Write",

225 "hooks": [

226 {

227 "type": "command",

228 "command": "\"$CLAUDE_PROJECT_DIR\"/.claude/hooks/protect-files.sh"

229 }

230 ]

231 }

232 ]

233 }

234 }

235 ```

236 </Step>

237</Steps>

238

239### Re-inject context after compaction

240

241When Claude's context window fills up, compaction summarizes the conversation to free space. This can lose important details. Use a `SessionStart` hook with a `compact` matcher to re-inject critical context after every compaction.

242

243Any text your command writes to stdout is added to Claude's context. This example reminds Claude of project conventions and recent work. Add this to `.claude/settings.json` in your project root:

100 244

101```json theme={null}245```json theme={null}

102{246{

103 "hooks": {247 "hooks": {

104 "PreToolUse": [248 "SessionStart": [

105 {249 {

106 "matcher": "Bash",250 "matcher": "compact",

107 "hooks": [251 "hooks": [

108 {252 {

109 "type": "command",253 "type": "command",

110 "command": "jq -r '\"\\(.tool_input.command) - \\(.tool_input.description // \"No description\")\"' >> ~/.claude/bash-command-log.txt"254 "command": "echo 'Reminder: use Bun, not npm. Run bun test before committing. Current sprint: auth refactor.'"

111 }255 }

112 ]256 ]

113 }257 }

116}260}

117```261```

118 262

119### Step 6: Test your hook263You can replace the `echo` with any command that produces dynamic output, like `git log --oneline -5` to show recent commits. For injecting context on every session start, consider using [CLAUDE.md](/en/memory) instead. For environment variables, see [`CLAUDE_ENV_FILE`](/en/hooks#persist-environment-variables) in the reference.

120 264

121Ask Claude to run a simple command like `ls` and check your log file:265## How hooks work

122 266

123```bash theme={null}267Hook events fire at specific lifecycle points in Claude Code. When an event fires, all matching hooks run in parallel, and identical hook commands are automatically deduplicated. The table below shows each event and when it triggers:

124cat ~/.claude/bash-command-log.txt

125```

126 268

127You should see entries like:269| Event | When it fires |

270| :------------------- | :----------------------------------------------------------------- |

271| `SessionStart` | When a session begins or resumes |

272| `UserPromptSubmit` | When you submit a prompt, before Claude processes it |

273| `PreToolUse` | Before a tool call executes. Can block it |

274| `PermissionRequest` | When a permission dialog appears |

275| `PostToolUse` | After a tool call succeeds |

276| `PostToolUseFailure` | After a tool call fails |

277| `Notification` | When Claude Code sends a notification |

278| `SubagentStart` | When a subagent is spawned |

279| `SubagentStop` | When a subagent finishes |

280| `Stop` | When Claude finishes responding |

281| `TeammateIdle` | When an [agent team](/en/agent-teams) teammate is about to go idle |

282| `TaskCompleted` | When a task is being marked as completed |

283| `PreCompact` | Before context compaction |

284| `SessionEnd` | When a session terminates |

128 285

286Each hook has a `type` that determines how it runs. Most hooks use `"type": "command"`, which runs a shell command. Two other options use a Claude model to make decisions: `"type": "prompt"` for single-turn evaluation and `"type": "agent"` for multi-turn verification with tool access. See [Prompt-based hooks](#prompt-based-hooks) and [Agent-based hooks](#agent-based-hooks) for details.

287

288### Read input and return output

289

290Hooks communicate with Claude Code through stdin, stdout, stderr, and exit codes. When an event fires, Claude Code passes event-specific data as JSON to your script's stdin. Your script reads that data, does its work, and tells Claude Code what to do next via the exit code.

291

292#### Hook input

293

294Every event includes common fields like `session_id` and `cwd`, but each event type adds different data. For example, when Claude runs a Bash command, a `PreToolUse` hook receives something like this on stdin:

295

296```json theme={null}

297{

298 "session_id": "abc123", // unique ID for this session

299 "cwd": "/Users/sarah/myproject", // working directory when the event fired

300 "hook_event_name": "PreToolUse", // which event triggered this hook

301 "tool_name": "Bash", // the tool Claude is about to use

302 "tool_input": { // the arguments Claude passed to the tool

303 "command": "npm test" // for Bash, this is the shell command

304 }

305}

129```306```

130ls - Lists files and directories307

308Your script can parse that JSON and act on any of those fields. `UserPromptSubmit` hooks get the `prompt` text instead, `SessionStart` hooks get the `source` (startup, resume, compact), and so on. See [Common input fields](/en/hooks#common-input-fields) in the reference for shared fields, and each event's section for event-specific schemas.

309

310#### Hook output

311

312Your script tells Claude Code what to do next by writing to stdout or stderr and exiting with a specific code. For example, a `PreToolUse` hook that wants to block a command:

313

314```bash theme={null}

315#!/bin/bash

316INPUT=$(cat)

317COMMAND=$(echo "$INPUT" | jq -r '.tool_input.command')

318

319if echo "$COMMAND" | grep -q "drop table"; then

320 echo "Blocked: dropping tables is not allowed" >&2 # stderr becomes Claude's feedback

321 exit 2 # exit 2 = block the action

322fi

323

324exit 0 # exit 0 = let it proceed

131```325```

132 326

133## More Examples327The exit code determines what happens next:

328

329* **Exit 0**: the action proceeds. For `UserPromptSubmit` and `SessionStart` hooks, anything you write to stdout is added to Claude's context.

330* **Exit 2**: the action is blocked. Write a reason to stderr, and Claude receives it as feedback so it can adjust.

331* **Any other exit code**: the action proceeds. Stderr is logged but not shown to Claude. Toggle verbose mode with `Ctrl+O` to see these messages in the transcript.

332

333#### Structured JSON output

334

335Exit codes give you two options: allow or block. For more control, exit 0 and print a JSON object to stdout instead.

134 336

135<Note>337<Note>

136 For a complete example implementation, see the [bash command validator example](https://github.com/anthropics/claude-code/blob/main/examples/hooks/bash_command_validator_example.py) in our public codebase.338 Use exit 2 to block with a stderr message, or exit 0 with JSON for structured control. Don't mix them: Claude Code ignores JSON when you exit 2.

137</Note>339</Note>

138 340

139### Code Formatting Hook341For example, a `PreToolUse` hook can deny a tool call and tell Claude why, or escalate it to the user for approval:

342

343```json theme={null}

344{

345 "hookSpecificOutput": {

346 "hookEventName": "PreToolUse",

347 "permissionDecision": "deny",

348 "permissionDecisionReason": "Use rg instead of grep for better performance"

349 }

350}

351```

352

353Claude Code reads `permissionDecision` and cancels the tool call, then feeds `permissionDecisionReason` back to Claude as feedback. These three options are specific to `PreToolUse`:

354

355* `"allow"`: proceed without showing a permission prompt

356* `"deny"`: cancel the tool call and send the reason to Claude

357* `"ask"`: show the permission prompt to the user as normal

140 358

141Automatically format TypeScript files after editing:359Other events use different decision patterns. For example, `PostToolUse` and `Stop` hooks use a top-level `decision: "block"` field, while `PermissionRequest` uses `hookSpecificOutput.decision.behavior`. See the [summary table](/en/hooks#decision-control) in the reference for a full breakdown by event.

360

361For `UserPromptSubmit` hooks, use `additionalContext` instead to inject text into Claude's context. Prompt-based hooks (`type: "prompt"`) handle output differently: see [Prompt-based hooks](#prompt-based-hooks).

362

363### Filter hooks with matchers

364

365Without a matcher, a hook fires on every occurrence of its event. Matchers let you narrow that down. For example, if you want to run a formatter only after file edits (not after every tool call), add a matcher to your `PostToolUse` hook:

142 366

143```json theme={null}367```json theme={null}

144{368{

147 {371 {

148 "matcher": "Edit|Write",372 "matcher": "Edit|Write",

149 "hooks": [373 "hooks": [

150 {374 { "type": "command", "command": "prettier --write ..." }

151 "type": "command",

152 "command": "jq -r '.tool_input.file_path' | { read file_path; if echo \"$file_path\" | grep -q '\\.ts$'; then npx prettier --write \"$file_path\"; fi; }"

153 }

154 ]375 ]

155 }376 }

156 ]377 ]

158}379}

159```380```

160 381

161### Markdown Formatting Hook382The `"Edit|Write"` matcher is a regex pattern that matches the tool name. The hook only fires when Claude uses the `Edit` or `Write` tool, not when it uses `Bash`, `Read`, or any other tool.

162 383

163Automatically fix missing language tags and formatting issues in markdown files:384Each event type matches on a specific field. Matchers support exact strings and regex patterns:

164 385

165```json theme={null}386| Event | What the matcher filters | Example matcher values |

166{387| :--------------------------------------------------------------------- | :------------------------ | :----------------------------------------------------------------------------- |

389| `SessionStart` | how the session started | `startup`, `resume`, `clear`, `compact` |

390| `SessionEnd` | why the session ended | `clear`, `logout`, `prompt_input_exit`, `bypass_permissions_disabled`, `other` |

391| `Notification` | notification type | `permission_prompt`, `idle_prompt`, `auth_success`, `elicitation_dialog` |

392| `SubagentStart` | agent type | `Bash`, `Explore`, `Plan`, or custom agent names |

393| `PreCompact` | what triggered compaction | `manual`, `auto` |

394| `UserPromptSubmit`, `Stop`, `TeammateIdle`, `TaskCompleted` | no matcher support | always fires on every occurrence |

395| `SubagentStop` | agent type | same values as `SubagentStart` |

396

397A few more examples showing matchers on different event types:

398

399<Tabs>

400 <Tab title="Log every Bash command">

401 Match only `Bash` tool calls and log each command to a file. The `PostToolUse` event fires after the command completes, so `tool_input.command` contains what ran. The hook receives the event data as JSON on stdin, and `jq -r '.tool_input.command'` extracts just the command string, which `>>` appends to the log file:

402

403 ```json theme={null}

404 {

167 "hooks": {405 "hooks": {

168 "PostToolUse": [406 "PostToolUse": [

169 {407 {

170 "matcher": "Edit|Write",408 "matcher": "Bash",

171 "hooks": [409 "hooks": [

172 {410 {

173 "type": "command",411 "type": "command",

174 "command": "\"$CLAUDE_PROJECT_DIR\"/.claude/hooks/markdown_formatter.py"412 "command": "jq -r '.tool_input.command' >> ~/.claude/command-log.txt"

175 }413 }

176 ]414 ]

177 }415 }

178 ]416 ]

179 }417 }

180}418 }

181```419 ```

420 </Tab>

182 421

183Create `.claude/hooks/markdown_formatter.py` with this content:422 <Tab title="Match MCP tools">

~~184~~ 423 MCP tools use a different naming convention than built-in tools: `mcp__<server>__<tool>`, where `<server>` is the MCP server name and `<tool>` is the tool it provides. For example, `mcp__github__search_repositories` or `mcp__filesystem__read_file`. Use a regex matcher to target all tools from a specific server, or match across servers with a pattern like `mcp__.*__write.*`. See [Match MCP tools](/en/hooks#match-mcp-tools) in the reference for the full list of examples.

185````python theme={null}

186#!/usr/bin/env python3

187"""

188Markdown formatter for Claude Code output.

189Fixes missing language tags and spacing issues while preserving code content.

190"""

191import json

192import sys

193import re

194import os

~~195~~

196def detect_language(code):

197 """Best-effort language detection from code content."""

198 s = code.strip()

~~199~~

200 # JSON detection

201 if re.search(r'^\s*[{\[]', s):

202 try:

203 json.loads(s)

204 return 'json'

205 except:

206 pass

~~207~~

208 # Python detection

209 if re.search(r'^\s*def\s+\w+\s*\(', s, re.M) or \

210 re.search(r'^\s*(import|from)\s+\w+', s, re.M):

211 return 'python'

~~212~~

213 # JavaScript detection

214 if re.search(r'\b(function\s+\w+\s*\(|const\s+\w+\s*=)', s) or \

215 re.search(r'=>|console\.(log|error)', s):

216 return 'javascript'

~~217~~

218 # Bash detection

219 if re.search(r'^#!.*\b(bash|sh)\b', s, re.M) or \

220 re.search(r'\b(if|then|fi|for|in|do|done)\b', s):

221 return 'bash'

~~222~~

223 # SQL detection

224 if re.search(r'\b(SELECT|INSERT|UPDATE|DELETE|CREATE)\s+', s, re.I):

225 return 'sql'

~~226~~

227 return 'text'

~~228~~

229def format_markdown(content):

230 """Format markdown content with language detection."""

231 # Fix unlabeled code fences

232 def add_lang_to_fence(match):

233 indent, info, body, closing = match.groups()

234 if not info.strip():

235 lang = detect_language(body)

236 return f"{indent}```{lang}\n{body}{closing}\n"

237 return match.group(0)

~~238~~

239 fence_pattern = r'(?ms)^([ \t]{0,3})```([^\n]*)\n(.*?)(\n\1```)\s*$'

240 content = re.sub(fence_pattern, add_lang_to_fence, content)

~~241~~

242 # Fix excessive blank lines (only outside code fences)

243 content = re.sub(r'\n{3,}', '\n\n', content)

~~244~~

245 return content.rstrip() + '\n'

~~246~~

247# Main execution

248try:

249 input_data = json.load(sys.stdin)

250 file_path = input_data.get('tool_input', {}).get('file_path', '')

~~251~~

252 if not file_path.endswith(('.md', '.mdx')):

253 sys.exit(0) # Not a markdown file

~~254~~

255 if os.path.exists(file_path):

256 with open(file_path, 'r', encoding='utf-8') as f:

257 content = f.read()

~~258~~

259 formatted = format_markdown(content)

~~260~~

261 if formatted != content:

262 with open(file_path, 'w', encoding='utf-8') as f:

263 f.write(formatted)

264 print(f"✓ Fixed markdown formatting in {file_path}")

~~265~~

266except Exception as e:

267 print(f"Error formatting markdown: {e}", file=sys.stderr)

268 sys.exit(1)

269````

~~270~~

271Make the script executable:

272 424

273```bash theme={null}425 The command below extracts the tool name from the hook's JSON input with `jq` and writes it to stderr, where it shows up in verbose mode (`Ctrl+O`):

274chmod +x .claude/hooks/markdown_formatter.py

275```

276 426

277This hook automatically:427 ```json theme={null}

428 {

429 "hooks": {

430 "PreToolUse": [

431 {

432 "matcher": "mcp__github__.*",

433 "hooks": [

434 {

435 "type": "command",

436 "command": "echo \"GitHub tool called: $(jq -r '.tool_name')\" >&2"

437 }

438 ]

439 }

440 ]

441 }

442 }

443 ```

444 </Tab>

278 445

279* Detects programming languages in unlabeled code blocks446 <Tab title="Clean up on session end">

280* Adds appropriate language tags for syntax highlighting447 The `SessionEnd` event supports matchers on the reason the session ended. This hook only fires on `clear` (when you run `/clear`), not on normal exits:

281* Fixes excessive blank lines while preserving code content

282* Only processes markdown files (`.md`, `.mdx`)

283 448

284### Custom Notification Hook449 ```json theme={null}

450 {

451 "hooks": {

452 "SessionEnd": [

453 {

454 "matcher": "clear",

455 "hooks": [

456 {

457 "type": "command",

458 "command": "rm -f /tmp/claude-scratch-*.txt"

459 }

460 ]

461 }

462 ]

463 }

464 }

465 ```

466 </Tab>

467</Tabs>

468

469For full matcher syntax, see the [Hooks reference](/en/hooks#configuration).

470

471### Configure hook location

472

473Where you add a hook determines its scope:

474

475| Location | Scope | Shareable |

476| :--------------------------------------------------------- | :--------------------------------- | :--------------------------------- |

477| `~/.claude/settings.json` | All your projects | No, local to your machine |

478| `.claude/settings.json` | Single project | Yes, can be committed to the repo |

479| `.claude/settings.local.json` | Single project | No, gitignored |

480| Managed policy settings | Organization-wide | Yes, admin-controlled |

481| [Plugin](/en/plugins) `hooks/hooks.json` | When plugin is enabled | Yes, bundled with the plugin |

482| [Skill](/en/skills) or [agent](/en/sub-agents) frontmatter | While the skill or agent is active | Yes, defined in the component file |

285 483

286Get desktop notifications when Claude needs input:484You can also use the [`/hooks` menu](/en/hooks#the-hooks-menu) in Claude Code to add, delete, and view hooks interactively. To disable all hooks at once, use the toggle at the bottom of the `/hooks` menu or set `"disableAllHooks": true` in your settings file.

485

486Hooks added through the `/hooks` menu take effect immediately. If you edit settings files directly while Claude Code is running, the changes won't take effect until you review them in the `/hooks` menu or restart your session.

487

488## Prompt-based hooks

489

490For decisions that require judgment rather than deterministic rules, use `type: "prompt"` hooks. Instead of running a shell command, Claude Code sends your prompt and the hook's input data to a Claude model (Haiku by default) to make the decision. You can specify a different model with the `model` field if you need more capability.

491

492The model's only job is to return a yes/no decision as JSON:

493

494* `"ok": true`: the action proceeds

495* `"ok": false`: the action is blocked. The model's `"reason"` is fed back to Claude so it can adjust.

496

497This example uses a `Stop` hook to ask the model whether all requested tasks are complete. If the model returns `"ok": false`, Claude keeps working and uses the `reason` as its next instruction:

287 498

288```json theme={null}499```json theme={null}

289{500{

290 "hooks": {501 "hooks": {

291 "Notification": [502 "Stop": [

292 {503 {

293 "matcher": "",

294 "hooks": [504 "hooks": [

295 {505 {

296 "type": "command",506 "type": "prompt",

297 "command": "notify-send 'Claude Code' 'Awaiting your input'"507 "prompt": "Check if all tasks are complete. If not, respond with {\"ok\": false, \"reason\": \"what remains to be done\"}."

298 }508 }

299 ]509 ]

300 }510 }

303}513}

304```514```

305 515

306### File Protection Hook516For full configuration options, see [Prompt-based hooks](/en/hooks#prompt-based-hooks) in the reference.

517

518## Agent-based hooks

519

520When verification requires inspecting files or running commands, use `type: "agent"` hooks. Unlike prompt hooks which make a single LLM call, agent hooks spawn a subagent that can read files, search code, and use other tools to verify conditions before returning a decision.

307 521

308Block edits to sensitive files:522Agent hooks use the same `"ok"` / `"reason"` response format as prompt hooks, but with a longer default timeout of 60 seconds and up to 50 tool-use turns.

523

524This example verifies that tests pass before allowing Claude to stop:

309 525

310```json theme={null}526```json theme={null}

311{527{

312 "hooks": {528 "hooks": {

313 "PreToolUse": [529 "Stop": [

314 {530 {

315 "matcher": "Edit|Write",

316 "hooks": [531 "hooks": [

317 {532 {

318 "type": "command",533 "type": "agent",

319 "command": "python3 -c \"import json, sys; data=json.load(sys.stdin); path=data.get('tool_input',{}).get('file_path',''); sys.exit(2 if any(p in path for p in ['.env', 'package-lock.json', '.git/']) else 0)\""534 "prompt": "Verify that all unit tests pass. Run the test suite and check the results. $ARGUMENTS",

535 "timeout": 120

320 }536 }

321 ]537 ]

322 }538 }

325}541}

326```542```

327 543

328## Learn more544Use prompt hooks when the hook input data alone is enough to make a decision. Use agent hooks when you need to verify something against the actual state of the codebase.

545

546For full configuration options, see [Agent-based hooks](/en/hooks#agent-based-hooks) in the reference.

547

548## Limitations and troubleshooting

549

550### Limitations

551

552* Hooks communicate through stdout, stderr, and exit codes only. They cannot trigger slash commands or tool calls directly.

553* Hook timeout is 10 minutes by default, configurable per hook with the `timeout` field (in seconds).

554* `PostToolUse` hooks cannot undo actions since the tool has already executed.

555* `PermissionRequest` hooks do not fire in [non-interactive mode](/en/headless) (`-p`). Use `PreToolUse` hooks for automated permission decisions.

556* `Stop` hooks fire whenever Claude finishes responding, not only at task completion. They do not fire on user interrupts.

329 557

330* For reference documentation on hooks, see [Hooks reference](/en/hooks).558### Hook not firing

331* For comprehensive security best practices and safety guidelines, see [Security Considerations](/en/hooks#security-considerations) in the hooks reference documentation.

332* For troubleshooting steps and debugging techniques, see [Debugging](/en/hooks#debugging) in the hooks reference

333 documentation.

334 559

560The hook is configured but never executes.

335 561

562* Run `/hooks` and confirm the hook appears under the correct event

563* Check that the matcher pattern matches the tool name exactly (matchers are case-sensitive)

564* Verify you're triggering the right event type (e.g., `PreToolUse` fires before tool execution, `PostToolUse` fires after)

565* If using `PermissionRequest` hooks in non-interactive mode (`-p`), switch to `PreToolUse` instead

566

567### Hook error in output

568

569You see a message like "PreToolUse hook error: ..." in the transcript.

570

571* Your script exited with a non-zero code unexpectedly. Test it manually by piping sample JSON:

572 ```bash theme={null}

573 echo '{"tool_name":"Bash","tool_input":{"command":"ls"}}' | ./my-hook.sh

574 echo $? # Check the exit code

575 ```

576* If you see "command not found", use absolute paths or `$CLAUDE_PROJECT_DIR` to reference scripts

577* If you see "jq: command not found", install `jq` or use Python/Node.js for JSON parsing

578* If the script isn't running at all, make it executable: `chmod +x ./my-hook.sh`

579

580### `/hooks` shows no hooks configured

581

582You edited a settings file but the hooks don't appear in the menu.

583

584* Restart your session or open `/hooks` to reload. Hooks added through the `/hooks` menu take effect immediately, but manual file edits require a reload.

585* Verify your JSON is valid (trailing commas and comments are not allowed)

586* Confirm the settings file is in the correct location: `.claude/settings.json` for project hooks, `~/.claude/settings.json` for global hooks

587

588### Stop hook runs forever

589

590Claude keeps working in an infinite loop instead of stopping.

591

592Your Stop hook script needs to check whether it already triggered a continuation. Parse the `stop_hook_active` field from the JSON input and exit early if it's `true`:

593

594```bash theme={null}

595#!/bin/bash

596INPUT=$(cat)

597if [ "$(echo "$INPUT" | jq -r '.stop_hook_active')" = "true" ]; then

598 exit 0 # Allow Claude to stop

599fi

600# ... rest of your hook logic

601```

602

603### JSON validation failed

604

605Claude Code shows a JSON parsing error even though your hook script outputs valid JSON.

606

607When Claude Code runs a hook, it spawns a shell that sources your profile (`~/.zshrc` or `~/.bashrc`). If your profile contains unconditional `echo` statements, that output gets prepended to your hook's JSON:

608

609```

610Shell ready on arm64

611{"decision": "block", "reason": "Not allowed"}

612```

613

614Claude Code tries to parse this as JSON and fails. To fix this, wrap echo statements in your shell profile so they only run in interactive shells:

615

616```bash theme={null}

617# In ~/.zshrc or ~/.bashrc

618if [[ $- == *i* ]]; then

619 echo "Shell ready"

620fi

621```

622

623The `$-` variable contains shell flags, and `i` means interactive. Hooks run in non-interactive shells, so the echo is skipped.

624

625### Debug techniques

626

627Toggle verbose mode with `Ctrl+O` to see hook output in the transcript, or run `claude --debug` for full execution details including which hooks matched and their exit codes.

628

629## Learn more

336 630

337> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt631* [Hooks reference](/en/hooks): full event schemas, JSON output format, async hooks, and MCP tool hooks

632* [Security considerations](/en/hooks#security-considerations): review before deploying hooks in shared or production environments

633* [Bash command validator example](https://github.com/anthropics/claude-code/blob/main/examples/hooks/bash_command_validator_example.py): complete reference implementation

how-claude-code-works.md +240 −0 added

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

5# How Claude Code works

7> Understand the agentic loop, built-in tools, and how Claude Code interacts with your project.

9Claude Code is an agentic assistant that runs in your terminal. While it excels at coding, it can help with anything you can do from the command line: writing docs, running builds, searching files, researching topics, and more.

11This guide covers the core architecture, built-in capabilities, and [tips for working effectively](#work-effectively-with-claude-code). For step-by-step walkthroughs, see [Common workflows](/en/common-workflows). For extensibility features like skills, MCP, and hooks, see [Extend Claude Code](/en/features-overview).

13## The agentic loop

15When you give Claude a task, it works through three phases: **gather context**, **take action**, and **verify results**. These phases blend together. Claude uses tools throughout, whether searching files to understand your code, editing to make changes, or running tests to check its work.

17<img src="https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/agentic-loop.svg?fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=e30acfc80d6ff01ec877dd19c7af58b2" alt="The agentic loop: Your prompt leads to Claude gathering context, taking action, verifying results, and repeating until task complete. You can interrupt at any point." data-og-width="720" width="720" data-og-height="280" height="280" data-path="images/agentic-loop.svg" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/agentic-loop.svg?w=280&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=8620f6ebce761a1e8bbf7f0a0255cc15 280w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/agentic-loop.svg?w=560&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=7b46b5ff4454aa4a03725eee625b39a0 560w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/agentic-loop.svg?w=840&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=7fa0397bc37d147e3bf3bb6296c6477f 840w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/agentic-loop.svg?w=1100&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=73b2a7040c4c93821c4d5bbee9f4a2d4 1100w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/agentic-loop.svg?w=1650&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=17703cbeb6f59b40a00ab24f56d5f8f9 1650w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/agentic-loop.svg?w=2500&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=20dedb60b95d45a1bd60a0cccaf3e1ff 2500w" />

19The loop adapts to what you ask. A question about your codebase might only need context gathering. A bug fix cycles through all three phases repeatedly. A refactor might involve extensive verification. Claude decides what each step requires based on what it learned from the previous step, chaining dozens of actions together and course-correcting along the way.

21You're part of this loop too. You can interrupt at any point to steer Claude in a different direction, provide additional context, or ask it to try a different approach. Claude works autonomously but stays responsive to your input.

23The agentic loop is powered by two components: [models](#models) that reason and [tools](#tools) that act. Claude Code serves as the **agentic harness** around Claude: it provides the tools, context management, and execution environment that turn a language model into a capable coding agent.

25### Models

27Claude Code uses Claude models to understand your code and reason about tasks. Claude can read code in any language, understand how components connect, and figure out what needs to change to accomplish your goal. For complex tasks, it breaks work into steps, executes them, and adjusts based on what it learns.

29[Multiple models](/en/model-config) are available with different tradeoffs. Sonnet handles most coding tasks well. Opus provides stronger reasoning for complex architectural decisions. Switch with `/model` during a session or start with `claude --model <name>`.

31When this guide says "Claude chooses" or "Claude decides," it's the model doing the reasoning.

33### Tools

35Tools are what make Claude Code agentic. Without tools, Claude can only respond with text. With tools, Claude can act: read your code, edit files, run commands, search the web, and interact with external services. Each tool use returns information that feeds back into the loop, informing Claude's next decision.

37The built-in tools generally fall into four categories, each representing a different kind of agency.

39| Category | What Claude can do |

40| --------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------- |

41| **File operations** | Read files, edit code, create new files, rename and reorganize |

42| **Search** | Find files by pattern, search content with regex, explore codebases |

43| **Execution** | Run shell commands, start servers, run tests, use git |

44| **Web** | Search the web, fetch documentation, look up error messages |

45| **Code intelligence** | See type errors and warnings after edits, jump to definitions, find references (requires [code intelligence plugins](/en/discover-plugins#code-intelligence)) |

47These are the primary capabilities. Claude also has tools for spawning subagents, asking you questions, and other orchestration tasks. See [Tools available to Claude](/en/settings#tools-available-to-claude) for the complete list.

49Claude chooses which tools to use based on your prompt and what it learns along the way. When you say "fix the failing tests," Claude might:

511. Run the test suite to see what's failing

522. Read the error output

533. Search for the relevant source files

544. Read those files to understand the code

555. Edit the files to fix the issue

566. Run the tests again to verify

58Each tool use gives Claude new information that informs the next step. This is the agentic loop in action.

60**Extending the base capabilities:** The built-in tools are the foundation. You can extend what Claude knows with [skills](/en/skills), connect to external services with [MCP](/en/mcp), automate workflows with [hooks](/en/hooks), and offload tasks to [subagents](/en/sub-agents). These extensions form a layer on top of the core agentic loop. See [Extend Claude Code](/en/features-overview) for guidance on choosing the right extension for your needs.

62## What Claude can access

64This guide focuses on the terminal. Claude Code also runs in [VS Code, JetBrains IDEs, and other environments](/en/ide-integrations).

66When you run `claude` in a directory, Claude Code gains access to:

68* **Your project.** Files in your directory and subdirectories, plus files elsewhere with your permission.

69* **Your terminal.** Any command you could run: build tools, git, package managers, system utilities, scripts. If you can do it from the command line, Claude can too.

70* **Your git state.** Current branch, uncommitted changes, and recent commit history.

71* **Your [CLAUDE.md](/en/memory).** A markdown file where you store project-specific instructions, conventions, and context that Claude should know every session.

72* **Extensions you configure.** [MCP servers](/en/mcp) for external services, [skills](/en/skills) for workflows, [subagents](/en/sub-agents) for delegated work, and [Claude in Chrome](/en/chrome) for browser interaction.

74Because Claude sees your whole project, it can work across it. When you ask Claude to "fix the authentication bug," it searches for relevant files, reads multiple files to understand context, makes coordinated edits across them, runs tests to verify the fix, and commits the changes if you ask. This is different from inline code assistants that only see the current file.

76## Work with sessions

78Claude Code saves your conversation locally as you work. Each message, tool use, and result is stored, which enables [rewinding](#undo-changes-with-checkpoints), [resuming, and forking](#resume-or-fork-sessions) sessions. Before Claude makes code changes, it also snapshots the affected files so you can revert if needed.

80**Sessions are independent.** Each new session starts with a fresh context window, without the conversation history from previous sessions. Claude can persist learnings across sessions using [auto memory](/en/memory#auto-memory), and you can add your own persistent instructions in [CLAUDE.md](/en/memory).

82### Work across branches

84Each Claude Code conversation is a session tied to your current directory. When you resume, you only see sessions from that directory.

86Claude sees your current branch's files. When you switch branches, Claude sees the new branch's files, but your conversation history stays the same. Claude remembers what you discussed even after switching.

88Since sessions are tied to directories, you can run parallel Claude sessions by using [git worktrees](/en/common-workflows#run-parallel-claude-code-sessions-with-git-worktrees), which create separate directories for individual branches.

90### Resume or fork sessions

92When you resume a session with `claude --continue` or `claude --resume`, you pick up where you left off using the same session ID. New messages append to the existing conversation. Your full conversation history is restored, but session-scoped permissions are not. You'll need to re-approve those.

94<img src="https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/session-continuity.svg?fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=f671b603cc856119c95475b9084ebfef" alt="Session continuity: resume continues the same session, fork creates a new branch with a new ID." data-og-width="560" width="560" data-og-height="280" height="280" data-path="images/session-continuity.svg" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/session-continuity.svg?w=280&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=bddf1f33d419a27d7427acdf06058804 280w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/session-continuity.svg?w=560&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=417478eb9b86003b8eebaac058a8618a 560w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/session-continuity.svg?w=840&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=1d89d26e2c0487f067d187c3fa5f7170 840w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/session-continuity.svg?w=1100&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=8ea739a1f7860e4edbbcf74d444e37b2 1100w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/session-continuity.svg?w=1650&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=9cb5095d6a8920f04c3b78d31a69c809 1650w, https://mintcdn.com/claude-code/ELkJZG54dIaeldDC/images/session-continuity.svg?w=2500&fit=max&auto=format&n=ELkJZG54dIaeldDC&q=85&s=d67e1744e4878813d20c6c3f39d9459d 2500w" />

96To branch off and try a different approach without affecting the original session, use the `--fork-session` flag:

98```bash theme={null}

99claude --continue --fork-session

100```

101

102This creates a new session ID while preserving the conversation history up to that point. The original session remains unchanged. Like resume, forked sessions don't inherit session-scoped permissions.

103

104**Same session in multiple terminals**: If you resume the same session in multiple terminals, both terminals write to the same session file. Messages from both get interleaved, like two people writing in the same notebook. Nothing corrupts, but the conversation becomes jumbled. Each terminal only sees its own messages during the session, but if you resume that session later, you'll see everything interleaved. For parallel work from the same starting point, use `--fork-session` to give each terminal its own clean session.

105

106### The context window

107

108Claude's context window holds your conversation history, file contents, command outputs, [CLAUDE.md](/en/memory), loaded skills, and system instructions. As you work, context fills up. Claude compacts automatically, but instructions from early in the conversation can get lost. Put persistent rules in CLAUDE.md, and run `/context` to see what's using space.

109

110#### When context fills up

111

112Claude Code manages context automatically as you approach the limit. It clears older tool outputs first, then summarizes the conversation if needed. Your requests and key code snippets are preserved; detailed instructions from early in the conversation may be lost. Put persistent rules in CLAUDE.md rather than relying on conversation history.

113

114To control what's preserved during compaction, add a "Compact Instructions" section to CLAUDE.md or run `/compact` with a focus (like `/compact focus on the API changes`).

115

116Run `/context` to see what's using space. MCP servers add tool definitions to every request, so a few servers can consume significant context before you start working. Run `/mcp` to check per-server costs.

117

118#### Manage context with skills and subagents

119

120Beyond compaction, you can use other features to control what loads into context.

121

122[Skills](/en/skills) load on demand. Claude sees skill descriptions at session start, but the full content only loads when a skill is used. For skills you invoke manually, set `disable-model-invocation: true` to keep descriptions out of context until you need them.

123

124[Subagents](/en/sub-agents) get their own fresh context, completely separate from your main conversation. Their work doesn't bloat your context. When done, they return a summary. This isolation is why subagents help with long sessions.

125

126See [context costs](/en/features-overview#understand-context-costs) for what each feature costs, and [reduce token usage](/en/costs#reduce-token-usage) for tips on managing context.

127

128## Stay safe with checkpoints and permissions

129

130Claude has two safety mechanisms: checkpoints let you undo file changes, and permissions control what Claude can do without asking.

131

132### Undo changes with checkpoints

133

134**Every file edit is reversible.** Before Claude edits any file, it snapshots the current contents. If something goes wrong, press `Esc` twice to rewind to a previous state, or ask Claude to undo.

135

136Checkpoints are local to your session, separate from git. They only cover file changes. Actions that affect remote systems (databases, APIs, deployments) can't be checkpointed, which is why Claude asks before running commands with external side effects.

137

138### Control what Claude can do

139

140Press `Shift+Tab` to cycle through permission modes:

141

142* **Default**: Claude asks before file edits and shell commands

143* **Auto-accept edits**: Claude edits files without asking, still asks for commands

144* **Plan mode**: Claude uses read-only tools only, creating a plan you can approve before execution

145* **Delegate mode**: Claude coordinates work through [agent teammates](/en/agent-teams) only, with no direct implementation. Only available when an agent team is active.

146

147You can also allow specific commands in `.claude/settings.json` so Claude doesn't ask each time. This is useful for trusted commands like `npm test` or `git status`. Settings can be scoped from organization-wide policies down to personal preferences. See [Permissions](/en/permissions) for details.

148

149***

150

151## Work effectively with Claude Code

152

153These tips help you get better results from Claude Code.

154

155### Ask Claude Code for help

156

157Claude Code can teach you how to use it. Ask questions like "how do I set up hooks?" or "what's the best way to structure my CLAUDE.md?" and Claude will explain.

158

159Built-in commands also guide you through setup:

160

161* `/init` walks you through creating a CLAUDE.md for your project

162* `/agents` helps you configure custom subagents

163* `/doctor` diagnoses common issues with your installation

164

165### It's a conversation

166

167Claude Code is conversational. You don't need perfect prompts. Start with what you want, then refine:

168

169```

170> Fix the login bug

171

172[Claude investigates, tries something]

173

174> That's not quite right. The issue is in the session handling.

175

176[Claude adjusts approach]

177```

178

179When the first attempt isn't right, you don't start over. You iterate.

180

181#### Interrupt and steer

182

183You can interrupt Claude at any point. If it's going down the wrong path, just type your correction and press Enter. Claude will stop what it's doing and adjust its approach based on your input. You don't have to wait for it to finish or start over.

184

185### Be specific upfront

186

187The more precise your initial prompt, the fewer corrections you'll need. Reference specific files, mention constraints, and point to example patterns.

188

189```

190> The checkout flow is broken for users with expired cards.

191> Check src/payments/ for the issue, especially token refresh.

192> Write a failing test first, then fix it.

193```

194

195Vague prompts like "fix the login bug" work, but you'll spend more time steering. Specific prompts like the above often succeed on the first attempt.

196

197### Give Claude something to verify against

198

199Claude performs better when it can check its own work. Include test cases, paste screenshots of expected UI, or define the output you want.

200

201```

202> Implement validateEmail. Test cases: 'user@example.com' → true,

203> 'invalid' → false, 'user@.com' → false. Run the tests after.

204```

205

206For visual work, paste a screenshot of the design and ask Claude to compare its implementation against it.

207

208### Explore before implementing

209

210For complex problems, separate research from coding. Use plan mode (`Shift+Tab` twice) to analyze the codebase first:

211

212```

213> Read src/auth/ and understand how we handle sessions.

214> Then create a plan for adding OAuth support.

215```

216

217Review the plan, refine it through conversation, then let Claude implement. This two-phase approach produces better results than jumping straight to code.

218

219### Delegate, don't dictate

220

221Think of delegating to a capable colleague. Give context and direction, then trust Claude to figure out the details:

222

223```

224> The checkout flow is broken for users with expired cards.

225> The relevant code is in src/payments/. Can you investigate and fix it?

226```

227

228You don't need to specify which files to read or what commands to run. Claude figures that out.

229

230## What's next

231

232<CardGroup cols={2}>

233 <Card title="Extend with features" icon="puzzle-piece" href="/en/features-overview">

234 Add Skills, MCP connections, and custom commands

235 </Card>

236

237 <Card title="Common workflows" icon="graduation-cap" href="/en/common-workflows">

238 Step-by-step guides for typical tasks

239 </Card>

240</CardGroup>

iam.md +0 −200 deleted

File DeletedView Diff

~~1# Identity and Access Management~~

~~3> Learn how to configure user authentication, authorization, and access controls for Claude Code in your organization.~~

~~5## Authentication methods~~

~~7Setting up Claude Code requires access to Anthropic models. For teams, you can set up Claude Code access in one of four ways:~~

~~9* Claude API via the Claude Console~~

~~10* Amazon Bedrock~~

~~11* Microsoft Foundry~~

~~12* Google Vertex AI~~

~~14### Claude API authentication~~

~~16**To set up Claude Code access for your team via Claude API:**~~

~~181. Use your existing Claude Console account or create a new Claude Console account~~

~~192. You can add users through either method below:~~

~~20 * Bulk invite users from within the Console (Console -> Settings -> Members -> Invite)~~

~~21 * [Set up SSO](https://support.claude.com/en/articles/10280258-setting-up-single-sign-on-on-the-api-console)~~

~~223. When inviting users, they need one of the following roles:~~

~~23 * "Claude Code" role means users can only create Claude Code API keys~~

~~24 * "Developer" role means users can create any kind of API key~~

~~254. Each invited user needs to complete these steps:~~

~~26 * Accept the Console invite~~

~~27 * [Check system requirements](/en/setup#system-requirements)~~

~~28 * [Install Claude Code](/en/setup#installation)~~

~~29 * Login with Console account credentials~~

~~31### Cloud provider authentication~~

~~33**To set up Claude Code access for your team via Bedrock, Vertex, or Azure:**~~

~~351. Follow the [Bedrock docs](/en/amazon-bedrock), [Vertex docs](/en/google-vertex-ai), or [Microsoft Foundry docs](/en/microsoft-foundry)~~

~~362. Distribute the environment variables and instructions for generating cloud credentials to your users. Read more about how to [manage configuration here](/en/settings).~~

~~373. Users can [install Claude Code](/en/setup#installation)~~

~~39## Access control and permissions~~

41We support fine-grained permissions so that you're able to specify exactly what the agent is allowed to do (e.g. run tests, run linter) and what it is not allowed to do (e.g. update cloud infrastructure). These permission settings can be checked into version control and distributed to all developers in your organization, as well as customized by individual developers.

~~43### Permission system~~

~~45Claude Code uses a tiered permission system to balance power and safety:~~

~~48| :---------------- | :------------------- | :---------------- | :-------------------------------------------- |~~

~~49| Read-only | File reads, LS, Grep | No | N/A |~~

~~50| Bash Commands | Shell execution | Yes | Permanently per project directory and command |~~

~~51| File Modification | Edit/write files | Yes | Until session end |~~

~~53### Configuring permissions~~

~~55You can view & manage Claude Code's tool permissions with `/permissions`. This UI lists all permission rules and the settings.json file they are sourced from.~~

~~57* **Allow** rules will allow Claude Code to use the specified tool without further manual approval.~~

~~58* **Ask** rules will ask the user for confirmation whenever Claude Code tries to use the specified tool. Ask rules take precedence over allow rules.~~

~~59* **Deny** rules will prevent Claude Code from using the specified tool. Deny rules take precedence over allow and ask rules.~~

~~60* **Additional directories** extend Claude's file access to directories beyond the initial working directory.~~

~~61* **Default mode** controls Claude's permission behavior when encountering new requests.~~

~~63Permission rules use the format: `Tool` or `Tool(optional-specifier)`~~

~~65A rule that is just the tool name matches any use of that tool. For example, adding `Bash` to the list of allow rules would allow Claude Code to use the Bash tool without requiring user approval.~~

~~67#### Permission modes~~

~~69Claude Code supports several permission modes that can be set as the `defaultMode` in [settings files](/en/settings#settings-files):~~

~~71| Mode | Description |~~

~~72| :------------------ | :--------------------------------------------------------------------------- |~~

~~73| `default` | Standard behavior - prompts for permission on first use of each tool |~~

~~74| `acceptEdits` | Automatically accepts file edit permissions for the session |~~

~~75| `plan` | Plan Mode - Claude can analyze but not modify files or execute commands |~~

~~76| `bypassPermissions` | Skips all permission prompts (requires safe environment - see warning below) |~~

~~78#### Working directories~~

~~80By default, Claude has access to files in the directory where it was launched. You can extend this access:~~

~~82* **During startup**: Use `--add-dir <path>` CLI argument~~

~~83* **During session**: Use `/add-dir` slash command~~

~~84* **Persistent configuration**: Add to `additionalDirectories` in [settings files](/en/settings#settings-files)~~

86Files in additional directories follow the same permission rules as the original working directory - they become readable without prompts, and file editing permissions follow the current permission mode.

~~88#### Tool-specific permission rules~~

~~90Some tools support more fine-grained permission controls:~~

~~92**Bash**~~

~~94* `Bash(npm run build)` Matches the exact Bash command `npm run build`~~

~~95* `Bash(npm run test:*)` Matches Bash commands starting with `npm run test`~~

~~96* `Bash(curl http://site.com/:*)` Matches curl commands that start with exactly `curl http://site.com/`~~

~~98<Tip>~~

~~99 Claude Code is aware of shell operators (like `&&`) so a prefix match rule like `Bash(safe-cmd:*)` won't give it permission to run the command `safe-cmd && other-cmd`~~

100</Tip>

~~101~~

102<Warning>

103 Important limitations of Bash permission patterns:

~~104~~

105 1. This tool uses **prefix matches**, not regex or glob patterns

106 2. The wildcard `:*` only works at the end of a pattern to match any continuation

107 3. Patterns like `Bash(curl http://github.com/:*)` can be bypassed in many ways:

108 * Options before URL: `curl -X GET http://github.com/...` won't match

109 * Different protocol: `curl https://github.com/...` won't match

110 * Redirects: `curl -L http://bit.ly/xyz` (redirects to github)

111 * Variables: `URL=http://github.com && curl $URL` won't match

112 * Extra spaces: `curl http://github.com` won't match

~~113~~

114 For more reliable URL filtering, consider:

~~115~~

116 * Using the WebFetch tool with `WebFetch(domain:github.com)` permission

117 * Instructing Claude Code about your allowed curl patterns via CLAUDE.md

118 * Using hooks for custom permission validation

119</Warning>

~~120~~

121**Read & Edit**

~~122~~

123`Edit` rules apply to all built-in tools that edit files. Claude will make a best-effort attempt to apply `Read` rules to all built-in tools that read files like Grep, Glob, and LS.

~~124~~

125Read & Edit rules both follow the [gitignore](https://git-scm.com/docs/gitignore) specification with four distinct pattern types:

~~126~~

128| ------------------ | -------------------------------------- | -------------------------------- | ---------------------------------- |

129| `//path` | **Absolute** path from filesystem root | `Read(//Users/alice/secrets/**)` | `/Users/alice/secrets/**` |

130| `~/path` | Path from **home** directory | `Read(~/Documents/*.pdf)` | `/Users/alice/Documents/*.pdf` |

131| `/path` | Path **relative to settings file** | `Edit(/src/**/*.ts)` | `<settings file path>/src/**/*.ts` |

132| `path` or `./path` | Path **relative to current directory** | `Read(*.env)` | `<cwd>/*.env` |

~~133~~

134<Warning>

135 A pattern like `/Users/alice/file` is NOT an absolute path - it's relative to your settings file! Use `//Users/alice/file` for absolute paths.

136</Warning>

~~137~~

138* `Edit(/docs/**)` - Edits in `<project>/docs/` (NOT `/docs/`!)

139* `Read(~/.zshrc)` - Reads your home directory's `.zshrc`

140* `Edit(//tmp/scratch.txt)` - Edits the absolute path `/tmp/scratch.txt`

141* `Read(src/**)` - Reads from `<current-directory>/src/`

~~142~~

143**WebFetch**

~~144~~

145* `WebFetch(domain:example.com)` Matches fetch requests to example.com

~~146~~

147**MCP**

~~148~~

149* `mcp__puppeteer` Matches any tool provided by the `puppeteer` server (name configured in Claude Code)

150* `mcp__puppeteer__puppeteer_navigate` Matches the `puppeteer_navigate` tool provided by the `puppeteer` server

~~151~~

152<Warning>

153 Unlike other permission types, MCP permissions do NOT support wildcards (`*`).

~~154~~

155 To approve all tools from an MCP server:

~~156~~

157 * ✅ Use: `mcp__github` (approves ALL GitHub tools)

158 * ❌ Don't use: `mcp__github__*` (wildcards are not supported)

~~159~~

160 To approve specific tools only, list each one:

~~161~~

162 * ✅ Use: `mcp__github__get_issue`

163 * ✅ Use: `mcp__github__list_issues`

164</Warning>

~~165~~

166### Additional permission control with hooks

~~167~~

168[Claude Code hooks](/en/hooks-guide) provide a way to register custom shell commands to perform permission evaluation at runtime. When Claude Code makes a tool call, PreToolUse hooks run before the permission system runs, and the hook output can determine whether to approve or deny the tool call in place of the permission system.

~~169~~

170### Enterprise managed settings

~~171~~

172For enterprise deployments of Claude Code, administrators can configure and distribute settings to their organization through the [Claude.ai admin console](https://claude.ai/admin-settings/claude-code). These settings are fetched automatically when users authenticate and cannot be overridden locally. This feature is available to Claude for Enterprise customers. If you don't see this option in your admin console, contact your Anthropic account team to have the feature enabled.

~~173~~

174For organizations that prefer file-based policy distribution, Claude Code also supports `managed-settings.json` files that can be deployed to [system directories](/en/settings#settings-files). These policy files follow the same format as regular settings files and cannot be overridden by user or project settings.

~~175~~

176### Settings precedence

~~177~~

178When multiple settings sources exist, they are applied in the following order (highest to lowest precedence):

~~179~~

1801. Managed settings (via Claude.ai admin console)

1812. File-based managed settings (`managed-settings.json`)

1823. Command line arguments

1834. Local project settings (`.claude/settings.local.json`)

1845. Shared project settings (`.claude/settings.json`)

1856. User settings (`~/.claude/settings.json`)

~~186~~

187This hierarchy ensures that organizational policies are always enforced while still allowing flexibility at the project and user levels where appropriate.

~~188~~

189## Credential management

~~190~~

191Claude Code securely manages your authentication credentials:

~~192~~

193* **Storage location**: On macOS, API keys, OAuth tokens, and other credentials are stored in the encrypted macOS Keychain.

194* **Supported authentication types**: Claude.ai credentials, Claude API credentials, Azure Auth, Bedrock Auth, and Vertex Auth.

195* **Custom credential scripts**: The [`apiKeyHelper`](/en/settings#available-settings) setting can be configured to run a shell script that returns an API key.

196* **Refresh intervals**: By default, `apiKeyHelper` is called after 5 minutes or on HTTP 401 response. Set `CLAUDE_CODE_API_KEY_HELPER_TTL_MS` environment variable for custom refresh intervals.

~~197~~

~~198~~

~~199~~

200> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

interactive-mode.md +171 −18

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Interactive mode5# Interactive mode

2 6

3> Complete reference for keyboard shortcuts, input modes, and interactive features in Claude Code sessions.7> Complete reference for keyboard shortcuts, input modes, and interactive features in Claude Code sessions.

5## Keyboard shortcuts9## Keyboard shortcuts

6 10

7<Note>11<Note>

8 Keyboard shortcuts may vary by platform and terminal. Press `?` to see available shortcuts for your environment. For example, Option key combinations on macOS may require configuring your terminal to use Option as a meta/escape key.12 Keyboard shortcuts may vary by platform and terminal. Press `?` to see available shortcuts for your environment.

14 **macOS users**: Option/Alt key shortcuts (`Alt+B`, `Alt+F`, `Alt+Y`, `Alt+M`, `Alt+P`) require configuring Option as Meta in your terminal:

16 * **iTerm2**: Settings → Profiles → Keys → Set Left/Right Option key to "Esc+"

17 * **Terminal.app**: Settings → Profiles → Keyboard → Check "Use Option as Meta Key"

18 * **VS Code**: Settings → Profiles → Keys → Set Left/Right Option key to "Esc+"

20 See [Terminal configuration](/en/terminal-config) for details.

9</Note>21</Note>

10 22

11### General controls23### General controls

12 24

~~14| :-------------------------------------------- | :--------------------------------- | :---------------------------------------------------------- |~~26| :------------------------------------------------ | :--------------------------------- | :--------------------------------------------------------------------------------------------------------------------------------------------------- |

29| `Ctrl+G` | Open in default text editor | Edit your prompt or custom response in your default text editor |

34| `Ctrl+B` | Background running tasks | Backgrounds bash commands and agents. Tmux users press twice |

35| `Ctrl+T` | Toggle task list | Show or hide the [task list](#task-list) in the terminal status area |

36| `Left/Right arrows` | Cycle through dialog tabs | Navigate between tabs in permission dialogs and menus |

~~23| `Shift+Tab` or `Alt+M` (some configurations) | Toggle permission modes | Switch between Auto-Accept Mode, Plan Mode, and normal mode |~~39| `Shift+Tab` or `Alt+M` (some configurations) | Toggle permission modes | Switch between Auto-Accept Mode, Plan Mode, and normal mode. When an [agent team](/en/agent-teams) is active, the cycle also includes Delegate Mode. |

41| `Option+T` (macOS) or `Alt+T` (Windows/Linux) | Toggle extended thinking | Enable or disable extended thinking mode. Run `/terminal-setup` first to enable this shortcut |

43### Text editing

45| Shortcut | Description | Context |

46| :----------------------- | :--------------------------- | :------------------------------------------------------------------------------------------------------------ |

47| `Ctrl+K` | Delete to end of line | Stores deleted text for pasting |

48| `Ctrl+U` | Delete entire line | Stores deleted text for pasting |

49| `Ctrl+Y` | Paste deleted text | Paste text deleted with `Ctrl+K` or `Ctrl+U` |

50| `Alt+Y` (after `Ctrl+Y`) | Cycle paste history | After pasting, cycle through previously deleted text. Requires [Option as Meta](#keyboard-shortcuts) on macOS |

51| `Alt+B` | Move cursor back one word | Word navigation. Requires [Option as Meta](#keyboard-shortcuts) on macOS |

52| `Alt+F` | Move cursor forward one word | Word navigation. Requires [Option as Meta](#keyboard-shortcuts) on macOS |

54### Theme and display

56| Shortcut | Description | Context |

57| :------- | :----------------------------------------- | :----------------------------------------------------------------------------------------------------------- |

58| `Ctrl+T` | Toggle syntax highlighting for code blocks | Only works inside the `/theme` picker menu. Controls whether code in Claude's responses uses syntax coloring |

60<Note>

61 Syntax highlighting is only available in the native build of Claude Code.

62</Note>

25 63

26### Multiline input64### Multiline input

27 65

~~29| :--------------- | :------------- | :-------------------------------- |~~67| :--------------- | :------------- | :------------------------------------------------------ |

35 73

36<Tip>74<Tip>

~~37 Configure your preferred line break behavior in terminal settings. Run `/terminal-setup` to install Shift+Enter binding for iTerm2 and VS Code terminals.~~75 Shift+Enter works without configuration in iTerm2, WezTerm, Ghostty, and Kitty. For other terminals (VS Code, Alacritty, Zed, Warp), run `/terminal-setup` to install the binding.

38</Tip>76</Tip>

39 77

40### Quick commands78### Quick commands

41 79

~~43| :----------- | :--------------------------------- | :------------------------------------------------------------ |~~81| :----------- | :---------------- | :------------------------------------------------------------------- |

~~45| `/` at start | Slash command | See [slash commands](/en/slash-commands) |~~

47| `@` | File path mention | Trigger file path autocomplete |84| `@` | File path mention | Trigger file path autocomplete |

48 85

86## Built-in commands

88Built-in commands are shortcuts for common actions. The table below covers commonly used commands but not all available options. Type `/` in Claude Code to see the full list, or type `/` followed by any letters to filter.

90To create your own commands you can invoke with `/`, see [skills](/en/skills).

92| Command | Purpose |

93| :------------------------ | :------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |

94| `/clear` | Clear conversation history |

95| `/compact [instructions]` | Compact conversation with optional focus instructions |

96| `/config` | Open the Settings interface (Config tab) |

97| `/context` | Visualize current context usage as a colored grid |

98| `/cost` | Show token usage statistics. See [cost tracking guide](/en/costs#using-the-cost-command) for subscription-specific details. |

99| `/debug [description]` | Troubleshoot the current session by reading the session debug log. Optionally describe the issue |

100| `/doctor` | Checks the health of your Claude Code installation |

101| `/exit` | Exit the REPL |

102| `/export [filename]` | Export the current conversation to a file or clipboard |

103| `/help` | Get usage help |

104| `/init` | Initialize project with `CLAUDE.md` guide |

105| `/mcp` | Manage MCP server connections and OAuth authentication |

106| `/memory` | Edit `CLAUDE.md` memory files |

107| `/model` | Select or change the AI model. With Opus 4.6, use left/right arrows to [adjust effort level](/en/model-config#adjust-effort-level). The change takes effect immediately without waiting for the current response to finish |

108| `/permissions` | View or update [permissions](/en/permissions#manage-permissions) |

109| `/plan` | Enter plan mode directly from the prompt |

110| `/rename <name>` | Rename the current session for easier identification |

111| `/resume [session]` | Resume a conversation by ID or name, or open the session picker |

112| `/rewind` | Rewind the conversation and/or code, or summarize from a selected message |

113| `/stats` | Visualize daily usage, session history, streaks, and model preferences |

114| `/status` | Open the Settings interface (Status tab) showing version, model, account, and connectivity |

115| `/statusline` | Set up Claude Code's status line UI |

116| `/copy` | Copy the last assistant response to clipboard |

117| `/tasks` | List and manage background tasks |

118| `/teleport` | Resume a remote session from claude.ai (subscribers only) |

119| `/theme` | Change the color theme |

120| `/todos` | List current TODO items |

121| `/usage` | For subscription plans only: show plan usage limits and rate limit status |

122

123### MCP prompts

124

125MCP servers can expose prompts that appear as commands. These use the format `/mcp__<server>__<prompt>` and are dynamically discovered from connected servers. See [MCP prompts](/en/mcp#use-mcp-prompts-as-commands) for details.

126

49## Vim editor mode127## Vim editor mode

50 128

51Enable vim-style editing with `/vim` command or configure permanently via `/config`.129Enable vim-style editing with `/vim` command or configure permanently via `/config`.

65### Navigation (NORMAL mode)143### Navigation (NORMAL mode)

66 144

67| Command | Action |145| Command | Action |

~~68| :-------------- | :------------------------ |~~146| :-------------- | :-------------------------------------------------- |

70| `w` | Next word |148| `w` | Next word |

71| `e` | End of word |149| `e` | End of word |

75| `^` | First non-blank character |153| `^` | First non-blank character |

76| `gg` | Beginning of input |154| `gg` | Beginning of input |

77| `G` | End of input |155| `G` | End of input |

156| `f{char}` | Jump to next occurrence of character |

157| `F{char}` | Jump to previous occurrence of character |

158| `t{char}` | Jump to just before next occurrence of character |

159| `T{char}` | Jump to just after previous occurrence of character |

160| `;` | Repeat last f/F/t/T motion |

161| `,` | Repeat last f/F/t/T motion in reverse |

162

163<Note>

164 In vim normal mode, if the cursor is at the beginning or end of input and cannot move further, the arrow keys navigate command history instead.

165</Note>

78 166

79### Editing (NORMAL mode)167### Editing (NORMAL mode)

80 168

87| `cc` | Change line |175| `cc` | Change line |

88| `C` | Change to end of line |176| `C` | Change to end of line |

178| `yy`/`Y` | Yank (copy) line |

179| `yw`/`ye`/`yb` | Yank word/to end/back |

180| `p` | Paste after cursor |

181| `P` | Paste before cursor |

182| `>>` | Indent line |

183| `<<` | Dedent line |

184| `J` | Join lines |

90| `.` | Repeat last change |185| `.` | Repeat last change |

91 186

187### Text objects (NORMAL mode)

188

189Text objects work with operators like `d`, `c`, and `y`:

190

191| Command | Action |

192| :-------- | :--------------------------------------- |

193| `iw`/`aw` | Inner/around word |

194| `iW`/`aW` | Inner/around WORD (whitespace-delimited) |

195| `i"`/`a"` | Inner/around double quotes |

196| `i'`/`a'` | Inner/around single quotes |

197| `i(`/`a(` | Inner/around parentheses |

198| `i[`/`a[` | Inner/around brackets |

199| `i{`/`a{` | Inner/around braces |

200

92## Command history201## Command history

93 202

94Claude Code maintains command history for the current session:203Claude Code maintains command history for the current session:

129 238

130**Key features:**239**Key features:**

131 240

132* Output is buffered and Claude can retrieve it using the BashOutput tool241* Output is buffered and Claude can retrieve it using the TaskOutput tool

133* Background tasks have unique IDs for tracking and output retrieval242* Background tasks have unique IDs for tracking and output retrieval

134* Background tasks are automatically cleaned up when Claude Code exits243* Background tasks are automatically cleaned up when Claude Code exits

135 244

245To disable all background task functionality, set the `CLAUDE_CODE_DISABLE_BACKGROUND_TASKS` environment variable to `1`. See [Environment variables](/en/settings#environment-variables) for details.

246

136**Common backgrounded commands:**247**Common backgrounded commands:**

137 248

138* Build tools (webpack, vite, make)249* Build tools (webpack, vite, make)

157* Shows real-time progress and output268* Shows real-time progress and output

158* Supports the same `Ctrl+B` backgrounding for long-running commands269* Supports the same `Ctrl+B` backgrounding for long-running commands

159* Does not require Claude to interpret or approve the command270* Does not require Claude to interpret or approve the command

271* Supports history-based autocomplete: type a partial command and press **Tab** to complete from previous `!` commands in the current project

160 272

161This is useful for quick shell operations while maintaining conversation context.273This is useful for quick shell operations while maintaining conversation context.

162 274

275## Prompt suggestions

276

277When you first open a session, a grayed-out example command appears in the prompt input to help you get started. Claude Code picks this from your project's git history, so it reflects files you've been working on recently.

278

279After Claude responds, suggestions continue to appear based on your conversation history, such as a follow-up step from a multi-part request or a natural continuation of your workflow.

280

281* Press **Tab** to accept the suggestion, or press **Enter** to accept and submit

282* Start typing to dismiss it

283

284The suggestion runs as a background request that reuses the parent conversation's prompt cache, so the additional cost is minimal. Claude Code skips suggestion generation when the cache is cold to avoid unnecessary cost.

285

286Suggestions are automatically skipped after the first turn of a conversation, in non-interactive mode, and in plan mode.

287

288To disable prompt suggestions entirely, set the environment variable or toggle the setting in `/config`:

289

290```bash theme={null}

291export CLAUDE_CODE_ENABLE_PROMPT_SUGGESTION=false

292```

293

294## Task list

295

296When working on complex, multi-step work, Claude creates a task list to track progress. Tasks appear in the status area of your terminal with indicators showing what's pending, in progress, or complete.

297

298* Press `Ctrl+T` to toggle the task list view. The display shows up to 10 tasks at a time

299* To see all tasks or clear them, ask Claude directly: "show me all tasks" or "clear all tasks"

300* Tasks persist across context compactions, helping Claude stay organized on larger projects

301* To share a task list across sessions, set `CLAUDE_CODE_TASK_LIST_ID` to use a named directory in `~/.claude/tasks/`: `CLAUDE_CODE_TASK_LIST_ID=my-project claude`

302* To revert to the previous TODO list, set `CLAUDE_CODE_ENABLE_TASKS=false`.

303

304## PR review status

305

306When working on a branch with an open pull request, Claude Code displays a clickable PR link in the footer (for example, "PR #446"). The link has a colored underline indicating the review state:

307

308* Green: approved

309* Yellow: pending review

310* Red: changes requested

311* Gray: draft

312* Purple: merged

313

314`Cmd+click` (Mac) or `Ctrl+click` (Windows/Linux) the link to open the pull request in your browser. The status updates automatically every 60 seconds.

315

316<Note>

317 PR status requires the `gh` CLI to be installed and authenticated (`gh auth login`).

318</Note>

319

163## See also320## See also

164 321

165* [Slash commands](/en/slash-commands) - Interactive session commands322* [Skills](/en/skills) - Custom prompts and workflows

166* [Checkpointing](/en/checkpointing) - Rewind Claude's edits and restore previous states323* [Checkpointing](/en/checkpointing) - Rewind Claude's edits and restore previous states

167* [CLI reference](/en/cli-reference) - Command-line flags and options324* [CLI reference](/en/cli-reference) - Command-line flags and options

168* [Settings](/en/settings) - Configuration options325* [Settings](/en/settings) - Configuration options

169* [Memory management](/en/memory) - Managing CLAUDE.md files326* [Memory management](/en/memory) - Managing CLAUDE.md files

~~170~~

~~171~~

~~172~~

173> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

jetbrains.md +4 −4

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# JetBrains IDEs5# JetBrains IDEs

2 6

3> Use Claude Code with JetBrains IDEs including IntelliJ, PyCharm, WebStorm, and more7> Use Claude Code with JetBrains IDEs including IntelliJ, PyCharm, WebStorm, and more

146* Being aware of which files Claude Code has access to modify150* Being aware of which files Claude Code has access to modify

147 151

148For additional help, see our [troubleshooting guide](/en/troubleshooting).152For additional help, see our [troubleshooting guide](/en/troubleshooting).

~~149~~

~~150~~

~~151~~

152> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

keybindings.md +381 −0 added

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

5# Customize keyboard shortcuts

7> Customize keyboard shortcuts in Claude Code with a keybindings configuration file.

9Claude Code supports customizable keyboard shortcuts. Run `/keybindings` to create or open your configuration file at `~/.claude/keybindings.json`.

11## Configuration file

13The keybindings configuration file is an object with a `bindings` array. Each block specifies a context and a map of keystrokes to actions.

15<Note>Changes to the keybindings file are automatically detected and applied without restarting Claude Code.</Note>

17| Field | Description |

18| :--------- | :------------------------------------------------- |

19| `$schema` | Optional JSON Schema URL for editor autocompletion |

20| `$docs` | Optional documentation URL |

21| `bindings` | Array of binding blocks by context |

23This example binds `Ctrl+E` to open an external editor in the chat context, and unbinds `Ctrl+U`:

25```json theme={null}

26{

27 "$schema": "https://www.schemastore.org/claude-code-keybindings.json",

28 "$docs": "https://code.claude.com/docs/en/keybindings",

29 "bindings": [

30 {

31 "context": "Chat",

32 "bindings": {

33 "ctrl+e": "chat:externalEditor",

34 "ctrl+u": null

35 }

36 }

37 ]

38}

39```

41## Contexts

43Each binding block specifies a **context** where the bindings apply:

45| Context | Description |

46| :---------------- | :----------------------------------------------- |

47| `Global` | Applies everywhere in the app |

48| `Chat` | Main chat input area |

49| `Autocomplete` | Autocomplete menu is open |

50| `Settings` | Settings menu (escape-only dismiss) |

51| `Confirmation` | Permission and confirmation dialogs |

52| `Tabs` | Tab navigation components |

53| `Help` | Help menu is visible |

54| `Transcript` | Transcript viewer |

55| `HistorySearch` | History search mode (Ctrl+R) |

56| `Task` | Background task is running |

57| `ThemePicker` | Theme picker dialog |

58| `Attachments` | Image/attachment bar navigation |

59| `Footer` | Footer indicator navigation (tasks, teams, diff) |

60| `MessageSelector` | Rewind and summarize dialog message selection |

61| `DiffDialog` | Diff viewer navigation |

62| `ModelPicker` | Model picker effort level |

63| `Select` | Generic select/list components |

64| `Plugin` | Plugin dialog (browse, discover, manage) |

66## Available actions

68Actions follow a `namespace:action` format, such as `chat:submit` to send a message or `app:toggleTodos` to show the task list. Each context has specific actions available.

70### App actions

72Actions available in the `Global` context:

74| Action | Default | Description |

75| :--------------------- | :------ | :-------------------------- |

76| `app:interrupt` | Ctrl+C | Cancel current operation |

77| `app:exit` | Ctrl+D | Exit Claude Code |

78| `app:toggleTodos` | Ctrl+T | Toggle task list visibility |

79| `app:toggleTranscript` | Ctrl+O | Toggle verbose transcript |

81### History actions

83Actions for navigating command history:

85| Action | Default | Description |

86| :----------------- | :------ | :-------------------- |

87| `history:search` | Ctrl+R | Open history search |

88| `history:previous` | Up | Previous history item |

89| `history:next` | Down | Next history item |

91### Chat actions

93Actions available in the `Chat` context:

95| Action | Default | Description |

96| :-------------------- | :------------------------ | :----------------------- |

97| `chat:cancel` | Escape | Cancel current input |

98| `chat:cycleMode` | Shift+Tab\* | Cycle permission modes |

99| `chat:modelPicker` | Cmd+P / Meta+P | Open model picker |

100| `chat:thinkingToggle` | Cmd+T / Meta+T | Toggle extended thinking |

101| `chat:submit` | Enter | Submit message |

102| `chat:undo` | Ctrl+\_ | Undo last action |

103| `chat:externalEditor` | Ctrl+G | Open in external editor |

104| `chat:stash` | Ctrl+S | Stash current prompt |

105| `chat:imagePaste` | Ctrl+V (Alt+V on Windows) | Paste image |

106

107\*On Windows without VT mode (Node \<24.2.0/\<22.17.0, Bun \<1.2.23), defaults to Meta+M.

108

109### Autocomplete actions

110

111Actions available in the `Autocomplete` context:

112

113| Action | Default | Description |

114| :---------------------- | :------ | :------------------ |

115| `autocomplete:accept` | Tab | Accept suggestion |

116| `autocomplete:dismiss` | Escape | Dismiss menu |

117| `autocomplete:previous` | Up | Previous suggestion |

118| `autocomplete:next` | Down | Next suggestion |

119

120### Confirmation actions

121

122Actions available in the `Confirmation` context:

123

124| Action | Default | Description |

125| :-------------------------- | :-------- | :---------------------------- |

126| `confirm:yes` | Y, Enter | Confirm action |

127| `confirm:no` | N, Escape | Decline action |

128| `confirm:previous` | Up | Previous option |

129| `confirm:next` | Down | Next option |

130| `confirm:nextField` | Tab | Next field |

131| `confirm:previousField` | (unbound) | Previous field |

132| `confirm:cycleMode` | Shift+Tab | Cycle permission modes |

133| `confirm:toggleExplanation` | Ctrl+E | Toggle permission explanation |

134

135### Permission actions

136

137Actions available in the `Confirmation` context for permission dialogs:

138

139| Action | Default | Description |

140| :----------------------- | :------ | :--------------------------- |

141| `permission:toggleDebug` | Ctrl+D | Toggle permission debug info |

142

143### Transcript actions

144

145Actions available in the `Transcript` context:

146

147| Action | Default | Description |

148| :------------------------- | :------------- | :---------------------- |

149| `transcript:toggleShowAll` | Ctrl+E | Toggle show all content |

150| `transcript:exit` | Ctrl+C, Escape | Exit transcript view |

151

152### History search actions

153

154Actions available in the `HistorySearch` context:

155

156| Action | Default | Description |

157| :---------------------- | :---------- | :----------------------- |

158| `historySearch:next` | Ctrl+R | Next match |

159| `historySearch:accept` | Escape, Tab | Accept selection |

160| `historySearch:cancel` | Ctrl+C | Cancel search |

161| `historySearch:execute` | Enter | Execute selected command |

162

163### Task actions

164

165Actions available in the `Task` context:

166

167| Action | Default | Description |

168| :---------------- | :------ | :---------------------- |

169| `task:background` | Ctrl+B | Background current task |

170

171### Theme actions

172

173Actions available in the `ThemePicker` context:

174

175| Action | Default | Description |

176| :------------------------------- | :------ | :------------------------- |

177| `theme:toggleSyntaxHighlighting` | Ctrl+T | Toggle syntax highlighting |

178

179### Help actions

180

181Actions available in the `Help` context:

182

183| Action | Default | Description |

184| :------------- | :------ | :-------------- |

185| `help:dismiss` | Escape | Close help menu |

186

187### Tabs actions

188

189Actions available in the `Tabs` context:

190

191| Action | Default | Description |

192| :-------------- | :-------------- | :----------- |

193| `tabs:next` | Tab, Right | Next tab |

194| `tabs:previous` | Shift+Tab, Left | Previous tab |

195

196### Attachments actions

197

198Actions available in the `Attachments` context:

199

200| Action | Default | Description |

201| :--------------------- | :---------------- | :------------------------- |

202| `attachments:next` | Right | Next attachment |

203| `attachments:previous` | Left | Previous attachment |

204| `attachments:remove` | Backspace, Delete | Remove selected attachment |

205| `attachments:exit` | Down, Escape | Exit attachment bar |

206

207### Footer actions

208

209Actions available in the `Footer` context:

210

211| Action | Default | Description |

212| :---------------------- | :------ | :------------------------ |

213| `footer:next` | Right | Next footer item |

214| `footer:previous` | Left | Previous footer item |

215| `footer:openSelected` | Enter | Open selected footer item |

216| `footer:clearSelection` | Escape | Clear footer selection |

217

218### Message selector actions

219

220Actions available in the `MessageSelector` context:

221

222| Action | Default | Description |

223| :----------------------- | :---------------------------------------- | :---------------- |

224| `messageSelector:up` | Up, K | Move up in list |

225| `messageSelector:down` | Down, J | Move down in list |

226| `messageSelector:top` | Ctrl+Up, Shift+Up, Meta+Up, Shift+K | Jump to top |

227| `messageSelector:bottom` | Ctrl+Down, Shift+Down, Meta+Down, Shift+J | Jump to bottom |

228| `messageSelector:select` | Enter | Select message |

229

230### Diff actions

231

232Actions available in the `DiffDialog` context:

233

234| Action | Default | Description |

235| :-------------------- | :----------------- | :--------------------- |

236| `diff:dismiss` | Escape | Close diff viewer |

237| `diff:previousSource` | Left | Previous diff source |

238| `diff:nextSource` | Right | Next diff source |

239| `diff:previousFile` | Up | Previous file in diff |

240| `diff:nextFile` | Down | Next file in diff |

241| `diff:viewDetails` | Enter | View diff details |

242| `diff:back` | (context-specific) | Go back in diff viewer |

243

244### Model picker actions

245

246Actions available in the `ModelPicker` context:

247

248| Action | Default | Description |

249| :--------------------------- | :------ | :-------------------- |

250| `modelPicker:decreaseEffort` | Left | Decrease effort level |

251| `modelPicker:increaseEffort` | Right | Increase effort level |

252

253### Select actions

254

255Actions available in the `Select` context:

256

257| Action | Default | Description |

258| :---------------- | :-------------- | :--------------- |

259| `select:next` | Down, J, Ctrl+N | Next option |

260| `select:previous` | Up, K, Ctrl+P | Previous option |

261| `select:accept` | Enter | Accept selection |

262| `select:cancel` | Escape | Cancel selection |

263

264### Plugin actions

265

266Actions available in the `Plugin` context:

267

268| Action | Default | Description |

269| :--------------- | :------ | :----------------------- |

270| `plugin:toggle` | Space | Toggle plugin selection |

271| `plugin:install` | I | Install selected plugins |

272

273### Settings actions

274

275Actions available in the `Settings` context:

276

277| Action | Default | Description |

278| :---------------- | :------ | :---------------------------------- |

279| `settings:search` | / | Enter search mode |

280| `settings:retry` | R | Retry loading usage data (on error) |

281

282## Keystroke syntax

283

284### Modifiers

285

286Use modifier keys with the `+` separator:

287

288* `ctrl` or `control` - Control key

289* `alt`, `opt`, or `option` - Alt/Option key

290* `shift` - Shift key

291* `meta`, `cmd`, or `command` - Meta/Command key

292

293For example:

294

295```

296ctrl+k Single key with modifier

297shift+tab Shift + Tab

298meta+p Command/Meta + P

299ctrl+shift+c Multiple modifiers

300```

301

302### Uppercase letters

303

304A standalone uppercase letter implies Shift. For example, `K` is equivalent to `shift+k`. This is useful for vim-style bindings where uppercase and lowercase keys have different meanings.

305

306Uppercase letters with modifiers (e.g., `ctrl+K`) are treated as stylistic and do **not** imply Shift — `ctrl+K` is the same as `ctrl+k`.

307

308### Chords

309

310Chords are sequences of keystrokes separated by spaces:

311

312```

313ctrl+k ctrl+s Press Ctrl+K, release, then Ctrl+S

314```

315

316### Special keys

317

318* `escape` or `esc` - Escape key

319* `enter` or `return` - Enter key

320* `tab` - Tab key

321* `space` - Space bar

322* `up`, `down`, `left`, `right` - Arrow keys

323* `backspace`, `delete` - Delete keys

324

325## Unbind default shortcuts

326

327Set an action to `null` to unbind a default shortcut:

328

329```json theme={null}

330{

331 "bindings": [

332 {

333 "context": "Chat",

334 "bindings": {

335 "ctrl+s": null

336 }

337 }

338 ]

339}

340```

341

342## Reserved shortcuts

343

344These shortcuts cannot be rebound:

345

346| Shortcut | Reason |

347| :------- | :------------------------- |

348| Ctrl+C | Hardcoded interrupt/cancel |

349| Ctrl+D | Hardcoded exit |

350

351## Terminal conflicts

352

353Some shortcuts may conflict with terminal multiplexers:

354

355| Shortcut | Conflict |

356| :------- | :-------------------------------- |

357| Ctrl+B | tmux prefix (press twice to send) |

358| Ctrl+A | GNU screen prefix |

359| Ctrl+Z | Unix process suspend (SIGTSTP) |

360

361## Vim mode interaction

362

363When vim mode is enabled (`/vim`), keybindings and vim mode operate independently:

364

365* **Vim mode** handles input at the text input level (cursor movement, modes, motions)

366* **Keybindings** handle actions at the component level (toggle todos, submit, etc.)

367* The Escape key in vim mode switches INSERT to NORMAL mode; it does not trigger `chat:cancel`

368* Most Ctrl+key shortcuts pass through vim mode to the keybinding system

369* In vim NORMAL mode, `?` shows the help menu (vim behavior)

370

371## Validation

372

373Claude Code validates your keybindings and shows warnings for:

374

375* Parse errors (invalid JSON or structure)

376* Invalid context names

377* Reserved shortcut conflicts

378* Terminal multiplexer conflicts

379* Duplicate bindings in the same context

380

381Run `/doctor` to see any keybinding warnings.

legal-and-compliance.md +4 −4

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Legal and compliance5# Legal and compliance

2 6

3> Legal agreements, compliance certifications, and security information for Claude Code.7> Legal agreements, compliance certifications, and security information for Claude Code.

34***38***

35 39

~~40> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt~~

llm-gateway.md +4 −4

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# LLM gateway configuration5# LLM gateway configuration

2 6

3> Learn how to configure Claude Code to work with LLM gateway solutions. Covers gateway requirements, authentication configuration, model selection, and provider-specific endpoint setup.7> Learn how to configure Claude Code to work with LLM gateway solutions. Covers gateway requirements, authentication configuration, model selection, and provider-specific endpoint setup.

168* [Claude Code settings](/en/settings)172* [Claude Code settings](/en/settings)

169* [Enterprise network configuration](/en/network-config)173* [Enterprise network configuration](/en/network-config)

170* [Third-party integrations overview](/en/third-party-integrations)174* [Third-party integrations overview](/en/third-party-integrations)

~~171~~

~~172~~

~~173~~

174> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

mcp.md +220 −29

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Connect Claude Code to tools via MCP5# Connect Claude Code to tools via MCP

2 6

3> Learn how to connect Claude Code to your tools with the Model Context Protocol.7> Learn how to connect Claude Code to your tools with the Model Context Protocol.

77 81

78```bash theme={null}82```bash theme={null}

79# Basic syntax83# Basic syntax

~~80claude mcp add --transport stdio <name> <command> [args...]~~84claude mcp add [options] <name> -- <command> [args...]

81 85

82# Real example: Add Airtable server86# Real example: Add Airtable server

~~83claude mcp add --transport stdio airtable --env AIRTABLE_API_KEY=YOUR_KEY \~~87claude mcp add --transport stdio --env AIRTABLE_API_KEY=YOUR_KEY airtable \

84 -- npx -y airtable-mcp-server88 -- npx -y airtable-mcp-server

85```89```

86 90

87<Note>91<Note>

~~88 **Understanding the "--" parameter:**~~92 **Important: Option ordering**

89 The `--` (double dash) separates Claude's own CLI flags from the command and arguments that get passed to the MCP server. Everything before `--` are options for Claude (like `--env`, `--scope`), and everything after `--` is the actual command to run the MCP server.93

94 All options (`--transport`, `--env`, `--scope`, `--header`) must come **before** the server name. The `--` (double dash) then separates the server name from the command and arguments that get passed to the MCP server.

90 95

91 For example:96 For example:

92 97

93 * `claude mcp add --transport stdio myserver -- npx server` → runs `npx server`98 * `claude mcp add --transport stdio myserver -- npx server` → runs `npx server`

~~94 * `claude mcp add --transport stdio myserver --env KEY=value -- python server.py --port 8080` → runs `python server.py --port 8080` with `KEY=value` in environment~~99 * `claude mcp add --transport stdio --env KEY=value myserver -- python server.py --port 8080` → runs `python server.py --port 8080` with `KEY=value` in environment

95 100

96 This prevents conflicts between Claude's flags and the server's flags.101 This prevents conflicts between Claude's flags and the server's flags.

97</Note>102</Note>

114/mcp119/mcp

115```120```

116 121

122### Dynamic tool updates

123

124Claude Code supports MCP `list_changed` notifications, allowing MCP servers to dynamically update their available tools, prompts, and resources without requiring you to disconnect and reconnect. When an MCP server sends a `list_changed` notification, Claude Code automatically refreshes the available capabilities from that server.

125

117<Tip>126<Tip>

118 Tips:127 Tips:

119 128

211 220

212Local-scoped servers represent the default configuration level and are stored in `~/.claude.json` under your project's path. These servers remain private to you and are only accessible when working within the current project directory. This scope is ideal for personal development servers, experimental configurations, or servers containing sensitive credentials that shouldn't be shared.221Local-scoped servers represent the default configuration level and are stored in `~/.claude.json` under your project's path. These servers remain private to you and are only accessible when working within the current project directory. This scope is ideal for personal development servers, experimental configurations, or servers containing sensitive credentials that shouldn't be shared.

213 222

223<Note>

224 The term "local scope" for MCP servers differs from general local settings. MCP local-scoped servers are stored in `~/.claude.json` (your home directory), while general local settings use `.claude/settings.local.json` (in the project directory). See [Settings](/en/settings#settings-files) for details on settings file locations.

225</Note>

226

214```bash theme={null}227```bash theme={null}

215# Add a local-scoped server (default)228# Add a local-scoped server (default)

216claude mcp add --transport http stripe https://mcp.stripe.com229claude mcp add --transport http stripe https://mcp.stripe.com

266 279

267 * **User and local scope**: `~/.claude.json` (in the `mcpServers` field or under project paths)280 * **User and local scope**: `~/.claude.json` (in the `mcpServers` field or under project paths)

268 * **Project scope**: `.mcp.json` in your project root (checked into source control)281 * **Project scope**: `.mcp.json` in your project root (checked into source control)

269 * **Enterprise managed**: `managed-mcp.json` in system directories (see [Enterprise MCP configuration](#enterprise-mcp-configuration))282 * **Managed**: `managed-mcp.json` in system directories (see [Managed MCP configuration](#managed-mcp-configuration))

270</Note>283</Note>

271 284

272### Scope hierarchy and precedence285### Scope hierarchy and precedence

400 * OAuth authentication works with HTTP servers413 * OAuth authentication works with HTTP servers

401</Tip>414</Tip>

402 415

416### Use pre-configured OAuth credentials

417

418Some MCP servers don't support automatic OAuth setup. If you see an error like "Incompatible auth server: does not support dynamic client registration," the server requires pre-configured credentials. Register an OAuth app through the server's developer portal first, then provide the credentials when adding the server.

419

420<Steps>

421 <Step title="Register an OAuth app with the server">

422 Create an app through the server's developer portal and note your client ID and client secret.

423

424 Many servers also require a redirect URI. If so, choose a port and register a redirect URI in the format `http://localhost:PORT/callback`. Use that same port with `--callback-port` in the next step.

425 </Step>

426

427 <Step title="Add the server with your credentials">

428 Choose one of the following methods. The port used for `--callback-port` can be any available port. It just needs to match the redirect URI you registered in the previous step.

429

430 <Tabs>

431 <Tab title="claude mcp add">

432 Use `--client-id` to pass your app's client ID. The `--client-secret` flag prompts for the secret with masked input:

433

434 ```bash theme={null}

435 claude mcp add --transport http \

436 --client-id your-client-id --client-secret --callback-port 8080 \

437 my-server https://mcp.example.com/mcp

438 ```

439 </Tab>

440

441 <Tab title="claude mcp add-json">

442 Include the `oauth` object in the JSON config and pass `--client-secret` as a separate flag:

443

444 ```bash theme={null}

445 claude mcp add-json my-server \

446 '{"type":"http","url":"https://mcp.example.com/mcp","oauth":{"clientId":"your-client-id","callbackPort":8080}}' \

447 --client-secret

448 ```

449 </Tab>

450

451 <Tab title="CI / env var">

452 Set the secret via environment variable to skip the interactive prompt:

453

454 ```bash theme={null}

455 MCP_CLIENT_SECRET=your-secret claude mcp add --transport http \

456 --client-id your-client-id --client-secret --callback-port 8080 \

457 my-server https://mcp.example.com/mcp

458 ```

459 </Tab>

460 </Tabs>

461 </Step>

462

463 <Step title="Authenticate in Claude Code">

464 Run `/mcp` in Claude Code and follow the browser login flow.

465 </Step>

466</Steps>

467

468<Tip>

469 Tips:

470

471 * The client secret is stored securely in your system keychain (macOS) or a credentials file, not in your config

472 * If the server uses a public OAuth client with no secret, use only `--client-id` without `--client-secret`

473 * These flags only apply to HTTP and SSE transports. They have no effect on stdio servers

474 * Use `claude mcp get <name>` to verify that OAuth credentials are configured for a server

475</Tip>

476

403## Add MCP servers from JSON configuration477## Add MCP servers from JSON configuration

404 478

405If you have a JSON configuration for an MCP server, you can add it directly:479If you have a JSON configuration for an MCP server, you can add it directly:

415 489

416 # Example: Adding a stdio server with JSON configuration490 # Example: Adding a stdio server with JSON configuration

417 claude mcp add-json local-weather '{"type":"stdio","command":"/path/to/weather-cli","args":["--api-key","abc123"],"env":{"CACHE_DIR":"/tmp"}}'491 claude mcp add-json local-weather '{"type":"stdio","command":"/path/to/weather-cli","args":["--api-key","abc123"],"env":{"CACHE_DIR":"/tmp"}}'

492

493 # Example: Adding an HTTP server with pre-configured OAuth credentials

494 claude mcp add-json my-server '{"type":"http","url":"https://mcp.example.com/mcp","oauth":{"clientId":"your-client-id","callbackPort":8080}}' --client-secret

418 ```495 ```

419 </Step>496 </Step>

420 497

592 * Resources can contain any type of content that the MCP server provides (text, JSON, structured data, etc.)669 * Resources can contain any type of content that the MCP server provides (text, JSON, structured data, etc.)

593</Tip>670</Tip>

594 671

595## Use MCP prompts as slash commands672## Scale with MCP Tool Search

673

674When you have many MCP servers configured, tool definitions can consume a significant portion of your context window. MCP Tool Search solves this by dynamically loading tools on-demand instead of preloading all of them.

675

676### How it works

677

678Claude Code automatically enables Tool Search when your MCP tool descriptions would consume more than 10% of the context window. You can [adjust this threshold](#configure-tool-search) or disable tool search entirely. When triggered:

679

6801. MCP tools are deferred rather than loaded into context upfront

6812. Claude uses a search tool to discover relevant MCP tools when needed

6823. Only the tools Claude actually needs are loaded into context

6834. MCP tools continue to work exactly as before from your perspective

684

685### For MCP server authors

686

687If you're building an MCP server, the server instructions field becomes more useful with Tool Search enabled. Server instructions help Claude understand when to search for your tools, similar to how [skills](/en/skills) work.

688

689Add clear, descriptive server instructions that explain:

690

691* What category of tasks your tools handle

692* When Claude should search for your tools

693* Key capabilities your server provides

694

695### Configure tool search

696

697Tool search runs in auto mode by default, meaning it activates only when your MCP tool definitions exceed the context threshold. If you have few tools, they load normally without tool search. This feature requires models that support `tool_reference` blocks: Sonnet 4 and later, or Opus 4 and later. Haiku models do not support tool search.

698

699Control tool search behavior with the `ENABLE_TOOL_SEARCH` environment variable:

596 700

597MCP servers can expose prompts that become available as slash commands in Claude Code.701| Value | Behavior |

702| :--------- | :--------------------------------------------------------------------------------- |

703| `auto` | Activates when MCP tools exceed 10% of context (default) |

704| `auto:<N>` | Activates at custom threshold, where `<N>` is a percentage (e.g., `auto:5` for 5%) |

705| `true` | Always enabled |

706| `false` | Disabled, all MCP tools loaded upfront |

707

708```bash theme={null}

709# Use a custom 5% threshold

710ENABLE_TOOL_SEARCH=auto:5 claude

711

712# Disable tool search entirely

713ENABLE_TOOL_SEARCH=false claude

714```

715

716Or set the value in your [settings.json `env` field](/en/settings#available-settings).

717

718You can also disable the MCPSearch tool specifically using the `disallowedTools` setting:

719

720```json theme={null}

721{

722 "permissions": {

723 "deny": ["MCPSearch"]

724 }

725}

726```

727

728## Use MCP prompts as commands

729

730MCP servers can expose prompts that become available as commands in Claude Code.

598 731

599### Execute MCP prompts732### Execute MCP prompts

600 733

631 * Server and prompt names are normalized (spaces become underscores)764 * Server and prompt names are normalized (spaces become underscores)

632</Tip>765</Tip>

633 766

634## Enterprise MCP configuration767## Managed MCP configuration

768

769For organizations that need centralized control over MCP servers, Claude Code supports two configuration options:

635 770

636For organizations that need centralized control over MCP servers, Claude Code supports enterprise-managed MCP configurations. This allows IT administrators to:7711. **Exclusive control with `managed-mcp.json`**: Deploy a fixed set of MCP servers that users cannot modify or extend

7722. **Policy-based control with allowlists/denylists**: Allow users to add their own servers, but restrict which ones are permitted

773

774These options allow IT administrators to:

637 775

638* **Control which MCP servers employees can access**: Deploy a standardized set of approved MCP servers across the organization776* **Control which MCP servers employees can access**: Deploy a standardized set of approved MCP servers across the organization

639* **Prevent unauthorized MCP servers**: Optionally restrict users from adding their own MCP servers777* **Prevent unauthorized MCP servers**: Restrict users from adding unapproved MCP servers

640* **Disable MCP entirely**: Remove MCP functionality completely if needed778* **Disable MCP entirely**: Remove MCP functionality completely if needed

641 779

642### Setting up enterprise MCP configuration780### Option 1: Exclusive control with managed-mcp.json

781

782When you deploy a `managed-mcp.json` file, it takes **exclusive control** over all MCP servers. Users cannot add, modify, or use any MCP servers other than those defined in this file. This is the simplest approach for organizations that want complete control.

783

784System administrators deploy the configuration file to a system-wide directory:

643 785

644System administrators can deploy an enterprise MCP configuration file alongside the managed settings file. See [settings files](/en/settings#settings-files) for the `managed-mcp.json` file locations on each platform.786* macOS: `/Library/Application Support/ClaudeCode/managed-mcp.json`

787* Linux and WSL: `/etc/claude-code/managed-mcp.json`

788* Windows: `C:\Program Files\ClaudeCode\managed-mcp.json`

789

790<Note>

791 These are system-wide paths (not user home directories like `~/Library/...`) that require administrator privileges. They are designed to be deployed by IT administrators.

792</Note>

645 793

646The `managed-mcp.json` file uses the same format as a standard `.mcp.json` file:794The `managed-mcp.json` file uses the same format as a standard `.mcp.json` file:

647 795

668}816}

669```817```

670 818

671### Restricting MCP servers with allowlists and denylists819### Option 2: Policy-based control with allowlists and denylists

672 820

673In addition to providing enterprise-managed servers, administrators can control which MCP servers users are allowed to configure using `allowedMcpServers` and `deniedMcpServers` in the [managed settings file](/en/settings#settings-files):821Instead of taking exclusive control, administrators can allow users to configure their own MCP servers while enforcing restrictions on which servers are permitted. This approach uses `allowedMcpServers` and `deniedMcpServers` in the [managed settings file](/en/settings#settings-files).

822

823<Note>

824 **Choosing between options**: Use Option 1 (`managed-mcp.json`) when you want to deploy a fixed set of servers with no user customization. Use Option 2 (allowlists/denylists) when you want to allow users to add their own servers within policy constraints.

825</Note>

674 826

675#### Restriction options827#### Restriction options

676 828

677Each entry in the allowlist or denylist can restrict servers in two ways:829Each entry in the allowlist or denylist can restrict servers in three ways:

678 830

6791. **By server name** (`serverName`): Matches the configured name of the server8311. **By server name** (`serverName`): Matches the configured name of the server

6802. **By command** (`serverCommand`): Matches the exact command and arguments used to start stdio servers8322. **By command** (`serverCommand`): Matches the exact command and arguments used to start stdio servers

8333. **By URL pattern** (`serverUrl`): Matches remote server URLs with wildcard support

681 834

682**Important**: Each entry must have **either** `serverName` **or** `serverCommand`, not both.835**Important**: Each entry must have exactly one of `serverName`, `serverCommand`, or `serverUrl`.

683 836

684#### Example configuration837#### Example configuration

685 838

692 845

693 // Allow by exact command (for stdio servers)846 // Allow by exact command (for stdio servers)

694 { "serverCommand": ["npx", "-y", "@modelcontextprotocol/server-filesystem"] },847 { "serverCommand": ["npx", "-y", "@modelcontextprotocol/server-filesystem"] },

695 { "serverCommand": ["python", "/usr/local/bin/approved-server.py"] }848 { "serverCommand": ["python", "/usr/local/bin/approved-server.py"] },

849

850 // Allow by URL pattern (for remote servers)

851 { "serverUrl": "https://mcp.company.com/*" },

852 { "serverUrl": "https://*.internal.corp/*" }

696 ],853 ],

697 "deniedMcpServers": [854 "deniedMcpServers": [

698 // Block by server name855 // Block by server name

699 { "serverName": "dangerous-server" },856 { "serverName": "dangerous-server" },

700 857

701 // Block by exact command (for stdio servers)858 // Block by exact command (for stdio servers)

702 { "serverCommand": ["npx", "-y", "unapproved-package"] }859 { "serverCommand": ["npx", "-y", "unapproved-package"] },

860

861 // Block by URL pattern (for remote servers)

862 { "serverUrl": "https://*.untrusted.com/*" }

703 ]863 ]

704}864}

705```865```

719 879

720**Non-stdio server behavior**:880**Non-stdio server behavior**:

721 881

722* Remote servers (HTTP, SSE, WebSocket) always match by name only882* Remote servers (HTTP, SSE, WebSocket) use URL-based matching when `serverUrl` entries exist in the allowlist

883* If no URL entries exist, remote servers fall back to name-based matching

723* Command restrictions do not apply to remote servers884* Command restrictions do not apply to remote servers

724 885

886#### How URL-based restrictions work

887

888URL patterns support wildcards using `*` to match any sequence of characters. This is useful for allowing entire domains or subdomains.

889

890**Wildcard examples**:

891

892* `https://mcp.company.com/*` - Allow all paths on a specific domain

893* `https://*.example.com/*` - Allow any subdomain of example.com

894* `http://localhost:*/*` - Allow any port on localhost

895

896**Remote server behavior**:

897

898* When the allowlist contains **any** `serverUrl` entries, remote servers **must** match one of those URL patterns

899* Remote servers cannot pass by name alone when URL restrictions are present

900* This ensures administrators can enforce which remote endpoints are allowed

901

902<Accordion title="Example: URL-only allowlist">

903 ```json theme={null}

904 {

905 "allowedMcpServers": [

906 { "serverUrl": "https://mcp.company.com/*" },

907 { "serverUrl": "https://*.internal.corp/*" }

908 ]

909 }

910 ```

911

912 **Result**:

913

914 * HTTP server at `https://mcp.company.com/api`: ✅ Allowed (matches URL pattern)

915 * HTTP server at `https://api.internal.corp/mcp`: ✅ Allowed (matches wildcard subdomain)

916 * HTTP server at `https://external.com/mcp`: ❌ Blocked (doesn't match any URL pattern)

917 * Stdio server with any command: ❌ Blocked (no name or command entries to match)

918</Accordion>

919

725<Accordion title="Example: Command-only allowlist">920<Accordion title="Example: Command-only allowlist">

726 ```json theme={null}921 ```json theme={null}

727 {922 {

779 974

780* `undefined` (default): No restrictions - users can configure any MCP server975* `undefined` (default): No restrictions - users can configure any MCP server

781* Empty array `[]`: Complete lockdown - users cannot configure any MCP servers976* Empty array `[]`: Complete lockdown - users cannot configure any MCP servers

782* List of entries: Users can only configure servers that match by name or command977* List of entries: Users can only configure servers that match by name, command, or URL pattern

783 978

784#### Denylist behavior (`deniedMcpServers`)979#### Denylist behavior (`deniedMcpServers`)

785 980

789 984

790#### Important notes985#### Important notes

791 986

792* These restrictions apply to all scopes: user, project, local, and even enterprise servers from `managed-mcp.json`987* **Option 1 and Option 2 can be combined**: If `managed-mcp.json` exists, it has exclusive control and users cannot add servers. Allowlists/denylists still apply to the managed servers themselves.

793* **Denylist takes absolute precedence**: If a server matches a denylist entry (by name or command), it will be blocked even if it's on the allowlist988* **Denylist takes absolute precedence**: If a server matches a denylist entry (by name, command, or URL), it will be blocked even if it's on the allowlist

794* Name-based and command-based restrictions work together: a server passes if it matches **either** a name entry **or** a command entry (unless blocked by denylist)989* Name-based, command-based, and URL-based restrictions work together: a server passes if it matches **either** a name entry, a command entry, or a URL pattern (unless blocked by denylist)

795 990

796<Note>991<Note>

797 **Enterprise configuration precedence**: The enterprise MCP configuration has the highest precedence and cannot be overridden by user, local, or project configurations.992 **When using `managed-mcp.json`**: Users cannot add MCP servers through `claude mcp add` or configuration files. The `allowedMcpServers` and `deniedMcpServers` settings still apply to filter which managed servers are actually loaded.

798</Note>993</Note>

~~799~~

~~800~~

~~801~~

802> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

memory.md +101 −19

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Manage Claude's memory5# Manage Claude's memory

2 6

3> Learn how to manage Claude Code's memory across sessions with different memory locations and best practices.7> Learn how to manage Claude Code's memory across sessions with different memory locations and best practices.

4 8

~~5Claude Code can remember your preferences across sessions, like style guidelines and common commands in your workflow.~~9Claude Code has two kinds of memory that persist across sessions:

11* **Auto memory**: Claude automatically saves useful context like project patterns, key commands, and your preferences. This persists across sessions.

12* **CLAUDE.md files**: Markdown files you write and maintain with instructions, rules, and preferences for Claude to follow.

14Both are loaded into Claude's context at the start of every session, though auto memory loads only the first 200 lines of its main file.

6 15

7## Determine memory type16## Determine memory type

8 17

~~9Claude Code offers four memory locations in a hierarchical structure, each serving a different purpose:~~18Claude Code offers several memory locations in a hierarchical structure, each serving a different purpose:

10 19

12| -------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------- | -------------------------------------------------------------------- | ------------------------------- |21| -------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------- | -------------------------------------------------------------------- | ------------------------------- |

13| **Enterprise policy** | • macOS: `/Library/Application Support/ClaudeCode/CLAUDE.md`<br />• Linux: `/etc/claude-code/CLAUDE.md`<br />• Windows: `C:\Program Files\ClaudeCode\CLAUDE.md` | Organization-wide instructions managed by IT/DevOps | Company coding standards, security policies, compliance requirements | All users in organization |22| **Managed policy** | • macOS: `/Library/Application Support/ClaudeCode/CLAUDE.md`<br />• Linux: `/etc/claude-code/CLAUDE.md`<br />• Windows: `C:\Program Files\ClaudeCode\CLAUDE.md` | Organization-wide instructions managed by IT/DevOps | Company coding standards, security policies, compliance requirements | All users in organization |

15| **Project rules** | `./.claude/rules/*.md` | Modular, topic-specific project instructions | Language-specific guidelines, testing conventions, API standards | Team members via source control |24| **Project rules** | `./.claude/rules/*.md` | Modular, topic-specific project instructions | Language-specific guidelines, testing conventions, API standards | Team members via source control |

18 28

19All memory files are automatically loaded into Claude Code's context when launched. Files higher in the hierarchy take precedence and are loaded first, providing a foundation that more specific memories build upon.29CLAUDE.md files in the directory hierarchy above the working directory are loaded in full at launch. CLAUDE.md files in child directories load on demand when Claude reads files in those directories. Auto memory loads only the first 200 lines of `MEMORY.md`. More specific instructions take precedence over broader ones.

20 30

21<Note>31<Note>

22 CLAUDE.local.md files are automatically added to .gitignore, making them ideal for private project-specific preferences that shouldn't be checked into version control.32 CLAUDE.local.md files are automatically added to .gitignore, making them ideal for private project-specific preferences that shouldn't be checked into version control.

23</Note>33</Note>

24 34

35## Auto memory

37Auto memory is a persistent directory where Claude records learnings, patterns, and insights as it works. Unlike CLAUDE.md files that contain instructions you write for Claude, auto memory contains notes Claude writes for itself based on what it discovers during sessions.

39<Note>

40 Auto memory is being rolled out gradually. If you aren't seeing auto memory, you can opt in by setting `CLAUDE_CODE_DISABLE_AUTO_MEMORY=0` in your environment.

41</Note>

43### What Claude remembers

45As Claude works, it may save things like:

47* Project patterns: build commands, test conventions, code style preferences

48* Debugging insights: solutions to tricky problems, common error causes

49* Architecture notes: key files, module relationships, important abstractions

50* Your preferences: communication style, workflow habits, tool choices

52### Where auto memory is stored

54Each project gets its own memory directory at `~/.claude/projects/<project>/memory/`. The `<project>` path is derived from the git repository root, so all subdirectories within the same repo share one auto memory directory. Git worktrees get separate memory directories. Outside a git repo, the working directory is used instead.

56The directory contains a `MEMORY.md` entrypoint and optional topic files:

58```text theme={null}

59~/.claude/projects/<project>/memory/

60├── MEMORY.md # Concise index, loaded into every session

61├── debugging.md # Detailed notes on debugging patterns

62├── api-conventions.md # API design decisions

63└── ... # Any other topic files Claude creates

64```

66`MEMORY.md` acts as an index of the memory directory. Claude reads and writes files in this directory throughout your session, using `MEMORY.md` to keep track of what's stored where.

68### How it works

70* The first 200 lines of `MEMORY.md` are loaded into Claude's system prompt at the start of every session. Content beyond 200 lines is not loaded automatically, and Claude is instructed to keep it concise by moving detailed notes into separate topic files.

71* Topic files like `debugging.md` or `patterns.md` are not loaded at startup. Claude reads them on demand using its standard file tools when it needs the information.

72* Claude reads and writes memory files during your session, so you'll see memory updates happen as you work.

74### Manage auto memory

76Auto memory files are markdown files you can edit at any time. Use `/memory` to open the file selector, which includes your auto memory entrypoint alongside your CLAUDE.md files.

78To ask Claude to save something specific, tell it directly: "remember that we use pnpm, not npm" or "save to memory that the API tests require a local Redis instance".

80When neither variable is set, auto memory follows the gradual rollout. The variable name uses double-negative logic: `DISABLE=0` means "don't disable" and forces auto memory on.

82```bash theme={null}

83export CLAUDE_CODE_DISABLE_AUTO_MEMORY=1 # Force off

84export CLAUDE_CODE_DISABLE_AUTO_MEMORY=0 # Force on

85```

25## CLAUDE.md imports87## CLAUDE.md imports

26 88

27CLAUDE.md files can import additional files using `@path/to/import` syntax. The following example imports 3 files:89CLAUDE.md files can import additional files using `@path/to/import` syntax. The following example imports 3 files:

33- git workflow @docs/git-instructions.md95- git workflow @docs/git-instructions.md

34```96```

35 97

36Both relative and absolute paths are allowed. In particular, importing files in user's home dir is a convenient way for your team members to provide individual instructions that are not checked into the repository. Imports are an alternative to CLAUDE.local.md that work better across multiple git worktrees.98Both relative and absolute paths are allowed. Relative paths resolve relative to the file containing the import, not the working directory. For private per-project preferences that shouldn't be checked into version control, prefer `CLAUDE.local.md`: it is automatically loaded and added to `.gitignore`.

100If you work across multiple git worktrees, `CLAUDE.local.md` only exists in one. Use a home-directory import instead so all worktrees share the same personal instructions:

37 101

38```102```

39# Individual Preferences103# Individual Preferences

40- @~/.claude/my-project-instructions.md104- @~/.claude/my-project-instructions.md

41```105```

42 106

107<Warning>

108 The first time Claude Code encounters external imports in a project, it shows an approval dialog listing the specific files. Approve to load them; decline to skip them. This is a one-time decision per project: once declined, the dialog does not resurface and the imports remain disabled.

109</Warning>

110

43To avoid potential collisions, imports are not evaluated inside markdown code spans and code blocks.111To avoid potential collisions, imports are not evaluated inside markdown code spans and code blocks.

44 112

45```113```

54 122

55Claude will also discover CLAUDE.md nested in subtrees under your current working directory. Instead of loading them at launch, they are only included when Claude reads files in those subtrees.123Claude will also discover CLAUDE.md nested in subtrees under your current working directory. Instead of loading them at launch, they are only included when Claude reads files in those subtrees.

56 124

125### Load memory from additional directories

126

127The `--add-dir` flag gives Claude access to additional directories outside your main working directory. By default, CLAUDE.md files from these directories are not loaded.

128

129To also load memory files (CLAUDE.md, .claude/CLAUDE.md, and .claude/rules/\*.md) from additional directories, set the `CLAUDE_CODE_ADDITIONAL_DIRECTORIES_CLAUDE_MD` environment variable:

130

131```bash theme={null}

132CLAUDE_CODE_ADDITIONAL_DIRECTORIES_CLAUDE_MD=1 claude --add-dir ../shared-config

133```

134

57## Directly edit memories with `/memory`135## Directly edit memories with `/memory`

58 136

~~59Use the `/memory` slash command during a session to open any memory file in your system editor for more extensive additions or organization.~~137Use the `/memory` command during a session to open any memory file in your system editor for more extensive additions or organization.

60 138

61## Set up project memory139## Set up project memory

62 140

103 181

104```markdown theme={null}182```markdown theme={null}

105---183---

106paths: src/api/**/*.ts184paths:

185 - "src/api/**/*.ts"

107---186---

108 187

109# API Development Rules188# API Development Rules

126| `*.md` | Markdown files in the project root |205| `*.md` | Markdown files in the project root |

127| `src/components/*.tsx` | React components in a specific directory |206| `src/components/*.tsx` | React components in a specific directory |

128 207

129You can use braces to match multiple patterns efficiently:208You can specify multiple patterns:

130 209

131```markdown theme={null}210```markdown theme={null}

132---211---

133paths: src/**/*.{ts,tsx}212paths:

213 - "src/**/*.ts"

214 - "lib/**/*.ts"

215 - "tests/**/*.test.ts"

134---216---

~~135~~

136# TypeScript/React Rules

137```217```

138 218

139This expands to match both `src/**/*.ts` and `src/**/*.tsx`. You can also combine multiple patterns with commas:219Brace expansion is supported for matching multiple extensions or directories:

140 220

141```markdown theme={null}221```markdown theme={null}

142---222---

143paths: {src,lib}/**/*.ts, tests/**/*.test.ts223paths:

224 - "src/**/*.{ts,tsx}"

225 - "{src,lib}/**/*.ts"

144---226---

227

228# TypeScript/React Rules

145```229```

146 230

231This expands `src/**/*.{ts,tsx}` to match both `.ts` and `.tsx` files.

232

147### Subdirectories233### Subdirectories

148 234

149Rules can be organized into subdirectories for better structure:235Rules can be organized into subdirectories for better structure:

198 284

199## Organization-level memory management285## Organization-level memory management

200 286

201Enterprise organizations can deploy centrally managed CLAUDE.md files that apply to all users.287Organizations can deploy centrally managed CLAUDE.md files that apply to all users.

202 288

203To set up organization-level memory management:289To set up organization-level memory management:

204 290

2051. Create the enterprise memory file at the **Enterprise policy** location shown in the [memory types table above](#determine-memory-type).2911. Create the managed memory file at the **Managed policy** location shown in the [memory types table above](#determine-memory-type).

206 292

2072. Deploy via your configuration management system (MDM, Group Policy, Ansible, etc.) to ensure consistent distribution across all developer machines.2932. Deploy via your configuration management system (MDM, Group Policy, Ansible, etc.) to ensure consistent distribution across all developer machines.

208 294

211* **Be specific**: "Use 2-space indentation" is better than "Format code properly".297* **Be specific**: "Use 2-space indentation" is better than "Format code properly".

212* **Use structure to organize**: Format each individual memory as a bullet point and group related memories under descriptive markdown headings.298* **Use structure to organize**: Format each individual memory as a bullet point and group related memories under descriptive markdown headings.

213* **Review periodically**: Update memories as your project evolves to ensure Claude is always using the most up to date information and context.299* **Review periodically**: Update memories as your project evolves to ensure Claude is always using the most up to date information and context.

~~214~~

~~215~~

~~216~~

217> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

microsoft-foundry.md +6 −6

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Claude Code on Microsoft Foundry5# Claude Code on Microsoft Foundry

2 6

3> Learn about configuring Claude Code through Microsoft Foundry, including setup, configuration, and troubleshooting.7> Learn about configuring Claude Code through Microsoft Foundry, including setup, configuration, and troubleshooting.

64# Azure resource name (replace {resource} with your resource name)68# Azure resource name (replace {resource} with your resource name)

65export ANTHROPIC_FOUNDRY_RESOURCE={resource}69export ANTHROPIC_FOUNDRY_RESOURCE={resource}

66# Or provide the full base URL:70# Or provide the full base URL:

~~67# export ANTHROPIC_FOUNDRY_BASE_URL=https://{resource}.services.ai.azure.com~~71# export ANTHROPIC_FOUNDRY_BASE_URL=https://{resource}.services.ai.azure.com/anthropic

68 72

69# Set models to your resource's deployment names73# Set models to your resource's deployment names

70export ANTHROPIC_DEFAULT_SONNET_MODEL='claude-sonnet-4-5'74export ANTHROPIC_DEFAULT_SONNET_MODEL='claude-sonnet-4-5'

71export ANTHROPIC_DEFAULT_HAIKU_MODEL='claude-haiku-4-5'75export ANTHROPIC_DEFAULT_HAIKU_MODEL='claude-haiku-4-5'

~~72export ANTHROPIC_DEFAULT_OPUS_MODEL='claude-opus-4-1'~~76export ANTHROPIC_DEFAULT_OPUS_MODEL='claude-opus-4-6'

73```77```

74 78

75For more details on model configuration options, see [Model configuration](/en/model-config).79For more details on model configuration options, see [Model configuration](/en/model-config).

105* [Microsoft Foundry documentation](https://learn.microsoft.com/en-us/azure/ai-foundry/what-is-azure-ai-foundry)109* [Microsoft Foundry documentation](https://learn.microsoft.com/en-us/azure/ai-foundry/what-is-azure-ai-foundry)

106* [Microsoft Foundry models](https://ai.azure.com/explore/models)110* [Microsoft Foundry models](https://ai.azure.com/explore/models)

107* [Microsoft Foundry pricing](https://azure.microsoft.com/en-us/pricing/details/ai-foundry/)111* [Microsoft Foundry pricing](https://azure.microsoft.com/en-us/pricing/details/ai-foundry/)

~~108~~

~~109~~

~~110~~

111> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

model-config.md +44 −18

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Model configuration5# Model configuration

2 6

3> Learn about the Claude Code model configuration, including model aliases like `opusplan`7> Learn about the Claude Code model configuration, including model aliases like `opusplan`

8 12

9* A **model alias**13* A **model alias**

10* A **model name**14* A **model name**

~~11 * Anthropic API: A full **[model name](https://docs.claude.com/en/docs/about-claude/models/overview#model-names)**~~15 * Anthropic API: A full **[model name](https://platform.claude.com/docs/en/about-claude/models/overview)**

12 * Bedrock: an inference profile ARN16 * Bedrock: an inference profile ARN

13 * Foundry: a deployment name17 * Foundry: a deployment name

14 * Vertex: a version name18 * Vertex: a version name

19remembering exact version numbers:23remembering exact version numbers:

20 24

21| Model alias | Behavior |25| Model alias | Behavior |

~~22| ---------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------- |~~26| ---------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------- |

23| **`default`** | Recommended model setting, depending on your account type |27| **`default`** | Recommended model setting, depending on your account type |

24| **`sonnet`** | Uses the latest Sonnet model (currently Sonnet 4.5) for daily coding tasks |28| **`sonnet`** | Uses the latest Sonnet model (currently Sonnet 4.5) for daily coding tasks |

26| **`haiku`** | Uses the fast and efficient Haiku model for simple tasks |30| **`haiku`** | Uses the fast and efficient Haiku model for simple tasks |

~~27| **`sonnet[1m]`** | Uses Sonnet with a [1 million token context window](https://docs.claude.com/en/docs/build-with-claude/context-windows#1m-token-context-window) window for long sessions |~~31| **`sonnet[1m]`** | Uses Sonnet with a [1 million token context window](https://platform.claude.com/docs/en/build-with-claude/context-windows#1m-token-context-window) for long sessions |

28| **`opusplan`** | Special mode that uses `opus` during plan mode, then switches to `sonnet` for execution |32| **`opusplan`** | Special mode that uses `opus` during plan mode, then switches to `sonnet` for execution |

29 33

34Aliases always point to the latest version. To pin to a specific version, use the full model name (for example, `claude-opus-4-5-20251101`) or set the corresponding environment variable like `ANTHROPIC_DEFAULT_OPUS_MODEL`.

30### Setting your model36### Setting your model

31 37

32You can configure your model in several ways, listed in order of priority:38You can configure your model in several ways, listed in order of priority:

62 68

63### `default` model setting69### `default` model setting

64 70

~~65The behavior of `default` depends on your account type.~~71The behavior of `default` depends on your account type:

66 72

~~67For certain Max users, Claude Code will automatically fall back to Sonnet if you~~73* **Max and Teams**: defaults to Opus 4.6

~~68hit a usage threshold with Opus.~~74* **Pro**: defaults to Opus 4.6 in Claude Code

75* **Enterprise**: Opus 4.6 is available but not the default

77Claude Code may automatically fall back to Sonnet if you hit a usage threshold with Opus.

69 78

70### `opusplan` model setting79### `opusplan` model setting

71 80

79This gives you the best of both worlds: Opus's superior reasoning for planning,88This gives you the best of both worlds: Opus's superior reasoning for planning,

80and Sonnet's efficiency for execution.89and Sonnet's efficiency for execution.

81 90

91### Adjust effort level

93[Effort levels](https://platform.claude.com/docs/en/build-with-claude/effort) control Opus 4.6's adaptive reasoning, which dynamically allocates thinking based on task complexity. Lower effort is faster and cheaper for straightforward tasks, while higher effort provides deeper reasoning for complex problems.

95Three levels are available: **low**, **medium**, and **high** (default).

97**Setting effort:**

99* **In `/model`**: use left/right arrow keys to adjust the effort slider when selecting a model

100* **Environment variable**: set `CLAUDE_CODE_EFFORT_LEVEL=low|medium|high`

101* **Settings**: set `effortLevel` in your settings file

102

103Effort is currently supported on Opus 4.6. The effort slider appears in `/model` when a supported model is selected.

104

82### Extended context with \[1m]105### Extended context with \[1m]

83 106

~~84For Console/API users, the `[1m]` suffix can be added to full model names to~~107The `[1m]` suffix enables a [1 million token context window](https://platform.claude.com/docs/en/build-with-claude/context-windows#1m-token-context-window) for long sessions.

~~85enable a~~108

~~86[1 million token context window](https://docs.claude.com/en/docs/build-with-claude/context-windows#1m-token-context-window).~~109<Note>

110 For Opus 4.6, the 1M context window is available for API and Claude Code pay-as-you-go users. Pro, Max, Teams, and Enterprise subscription users do not have access to Opus 4.6 1M context at launch.

111</Note>

112

113You can use the `[1m]` suffix with model aliases or full model names:

87 114

88```bash theme={null}115```bash theme={null}

~~89# Example of using a full model name with the [1m] suffix~~116# Use the sonnet[1m] alias

~~90/model anthropic.claude-sonnet-4-5-20250929-v1:0[1m]~~117/model sonnet[1m]

118

119# Or append [1m] to a full model name

120/model claude-sonnet-4-5-20250929[1m]

91```121```

92 122

93Note: Extended context models have123Note: Extended context models have

~~94[different pricing](https://docs.claude.com/en/docs/about-claude/pricing#long-context-pricing).~~124[different pricing](https://platform.claude.com/docs/en/about-claude/pricing#long-context-pricing).

95 125

96## Checking your current model126## Checking your current model

97 127

117 147

118### Prompt caching configuration148### Prompt caching configuration

119 149

120Claude Code automatically uses [prompt caching](https://docs.claude.com/en/docs/build-with-claude/prompt-caching) to optimize performance and reduce costs. You can disable prompt caching globally or for specific model tiers:150Claude Code automatically uses [prompt caching](https://platform.claude.com/docs/en/build-with-claude/prompt-caching) to optimize performance and reduce costs. You can disable prompt caching globally or for specific model tiers:

121 151

122| Environment variable | Description |152| Environment variable | Description |

123| ------------------------------- | ---------------------------------------------------------------------------------------------- |153| ------------------------------- | ---------------------------------------------------------------------------------------------- |

128 158

129These environment variables give you fine-grained control over prompt caching behavior. The global `DISABLE_PROMPT_CACHING` setting takes precedence over the model-specific settings, allowing you to quickly disable all caching when needed. The per-model settings are useful for selective control, such as when debugging specific models or working with cloud providers that may have different caching implementations.159These environment variables give you fine-grained control over prompt caching behavior. The global `DISABLE_PROMPT_CACHING` setting takes precedence over the model-specific settings, allowing you to quickly disable all caching when needed. The per-model settings are useful for selective control, such as when debugging specific models or working with cloud providers that may have different caching implementations.

~~130~~

~~131~~

~~132~~

133> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

monitoring-usage.md +18 −10

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Monitoring5# Monitoring

2 6

3> Learn how to enable and configure OpenTelemetry for Claude Code.7> Learn how to enable and configure OpenTelemetry for Claude Code.

67### Common configuration variables71### Common configuration variables

68 72

~~70| ----------------------------------------------- | --------------------------------------------------------- | ------------------------------------ |~~74| ----------------------------------------------- | ------------------------------------------------------------------------------------------ | ------------------------------------ |

71| `CLAUDE_CODE_ENABLE_TELEMETRY` | Enables telemetry collection (required) | `1` |75| `CLAUDE_CODE_ENABLE_TELEMETRY` | Enables telemetry collection (required) | `1` |

83| `OTEL_METRIC_EXPORT_INTERVAL` | Export interval in milliseconds (default: 60000) | `5000`, `60000` |87| `OTEL_METRIC_EXPORT_INTERVAL` | Export interval in milliseconds (default: 60000) | `5000`, `60000` |

84| `OTEL_LOGS_EXPORT_INTERVAL` | Logs export interval in milliseconds (default: 5000) | `1000`, `10000` |88| `OTEL_LOGS_EXPORT_INTERVAL` | Logs export interval in milliseconds (default: 5000) | `1000`, `10000` |

90| `OTEL_LOG_TOOL_DETAILS` | Enable logging of MCP server/tool names and skill names in tool events (default: disabled) | `1` to enable |

91| `CLAUDE_CODE_OTEL_HEADERS_HELPER_DEBOUNCE_MS` | Interval for refreshing dynamic headers (default: 1740000ms / 29 minutes) | `900000` |

86 92

87### Metrics cardinality control93### Metrics cardinality control

88 94

120echo "{\"Authorization\": \"Bearer $(get-token.sh)\", \"X-API-Key\": \"$(get-api-key.sh)\"}"126echo "{\"Authorization\": \"Bearer $(get-token.sh)\", \"X-API-Key\": \"$(get-api-key.sh)\"}"

121```127```

122 128

123#### Important limitations129#### Refresh behavior

~~124~~

125**Headers are fetched only at startup, not during runtime.** This is due to OpenTelemetry exporter architecture limitations.

126 130

127For scenarios requiring frequent token refresh, use an OpenTelemetry Collector as a proxy that can refresh its own headers.131The headers helper script runs at startup and periodically thereafter to support token refresh. By default, the script runs every 29 minutes. Customize the interval with the `CLAUDE_CODE_OTEL_HEADERS_HELPER_DEBOUNCE_MS` environment variable.

128 132

129### Multi-team organization support133### Multi-team organization support

130 134

331* All [standard attributes](#standard-attributes)335* All [standard attributes](#standard-attributes)

332* `event.name`: `"user_prompt"`336* `event.name`: `"user_prompt"`

333* `event.timestamp`: ISO 8601 timestamp337* `event.timestamp`: ISO 8601 timestamp

338* `event.sequence`: monotonically increasing counter for ordering events within a session

334* `prompt_length`: Length of the prompt339* `prompt_length`: Length of the prompt

335* `prompt`: Prompt content (redacted by default, enable with `OTEL_LOG_USER_PROMPTS=1`)340* `prompt`: Prompt content (redacted by default, enable with `OTEL_LOG_USER_PROMPTS=1`)

336 341

345* All [standard attributes](#standard-attributes)350* All [standard attributes](#standard-attributes)

346* `event.name`: `"tool_result"`351* `event.name`: `"tool_result"`

347* `event.timestamp`: ISO 8601 timestamp352* `event.timestamp`: ISO 8601 timestamp

353* `event.sequence`: monotonically increasing counter for ordering events within a session

348* `tool_name`: Name of the tool354* `tool_name`: Name of the tool

349* `success`: `"true"` or `"false"`355* `success`: `"true"` or `"false"`

350* `duration_ms`: Execution time in milliseconds356* `duration_ms`: Execution time in milliseconds

353* `source`: Decision source - `"config"`, `"user_permanent"`, `"user_temporary"`, `"user_abort"`, or `"user_reject"`359* `source`: Decision source - `"config"`, `"user_permanent"`, `"user_temporary"`, `"user_abort"`, or `"user_reject"`

354* `tool_parameters`: JSON string containing tool-specific parameters (when available)360* `tool_parameters`: JSON string containing tool-specific parameters (when available)

355 * For Bash tool: includes `bash_command`, `full_command`, `timeout`, `description`, `sandbox`361 * For Bash tool: includes `bash_command`, `full_command`, `timeout`, `description`, `sandbox`

362 * For MCP tools (when `OTEL_LOG_TOOL_DETAILS=1`): includes `mcp_server_name`, `mcp_tool_name`

363 * For Skill tool (when `OTEL_LOG_TOOL_DETAILS=1`): includes `skill_name`

356 364

357#### API request event365#### API request event

358 366

365* All [standard attributes](#standard-attributes)373* All [standard attributes](#standard-attributes)

366* `event.name`: `"api_request"`374* `event.name`: `"api_request"`

367* `event.timestamp`: ISO 8601 timestamp375* `event.timestamp`: ISO 8601 timestamp

376* `event.sequence`: monotonically increasing counter for ordering events within a session

368* `model`: Model used (for example, "claude-sonnet-4-5-20250929")377* `model`: Model used (for example, "claude-sonnet-4-5-20250929")

369* `cost_usd`: Estimated cost in USD378* `cost_usd`: Estimated cost in USD

370* `duration_ms`: Request duration in milliseconds379* `duration_ms`: Request duration in milliseconds

384* All [standard attributes](#standard-attributes)393* All [standard attributes](#standard-attributes)

385* `event.name`: `"api_error"`394* `event.name`: `"api_error"`

386* `event.timestamp`: ISO 8601 timestamp395* `event.timestamp`: ISO 8601 timestamp

396* `event.sequence`: monotonically increasing counter for ordering events within a session

387* `model`: Model used (for example, "claude-sonnet-4-5-20250929")397* `model`: Model used (for example, "claude-sonnet-4-5-20250929")

388* `error`: Error message398* `error`: Error message

389* `status_code`: HTTP status code (if applicable)399* `status_code`: HTTP status code (if applicable)

401* All [standard attributes](#standard-attributes)411* All [standard attributes](#standard-attributes)

402* `event.name`: `"tool_decision"`412* `event.name`: `"tool_decision"`

403* `event.timestamp`: ISO 8601 timestamp413* `event.timestamp`: ISO 8601 timestamp

414* `event.sequence`: monotonically increasing counter for ordering events within a session

404* `tool_name`: Name of the tool (for example, "Read", "Edit", "Write", "NotebookEdit")415* `tool_name`: Name of the tool (for example, "Read", "Edit", "Write", "NotebookEdit")

405* `decision`: Either `"accept"` or `"reject"`416* `decision`: Either `"accept"` or `"reject"`

406* `source`: Decision source - `"config"`, `"user_permanent"`, `"user_temporary"`, `"user_abort"`, or `"user_reject"`417* `source`: Decision source - `"config"`, `"user_permanent"`, `"user_temporary"`, `"user_abort"`, or `"user_reject"`

490 501

491* Telemetry is opt-in and requires explicit configuration502* Telemetry is opt-in and requires explicit configuration

492* Sensitive information like API keys or file contents are never included in metrics or events503* Sensitive information like API keys or file contents are never included in metrics or events

493* User prompt content is redacted by default - only prompt length is recorded. To enable user prompt logging, set `OTEL_LOG_USER_PROMPTS=1`504* User prompt content is redacted by default, only prompt length is recorded. To enable user prompt logging, set `OTEL_LOG_USER_PROMPTS=1`

505* MCP server/tool names and skill names are not logged by default because they can reveal user-specific configurations. To enable, set `OTEL_LOG_TOOL_DETAILS=1`

494 506

495## Monitoring Claude Code on Amazon Bedrock507## Monitoring Claude Code on Amazon Bedrock

496 508

497For detailed Claude Code usage monitoring guidance for Amazon Bedrock, see [Claude Code Monitoring Implementation (Bedrock)](https://github.com/aws-solutions-library-samples/guidance-for-claude-code-with-amazon-bedrock/blob/main/assets/docs/MONITORING.md).509For detailed Claude Code usage monitoring guidance for Amazon Bedrock, see [Claude Code Monitoring Implementation (Bedrock)](https://github.com/aws-solutions-library-samples/guidance-for-claude-code-with-amazon-bedrock/blob/main/assets/docs/MONITORING.md).

~~498~~

~~499~~

~~500~~

501> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

network-config.md +4 −4

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Enterprise network configuration5# Enterprise network configuration

2 6

3> Configure Claude Code for enterprise environments with proxy servers, custom Certificate Authorities (CA), and mutual Transport Layer Security (mTLS) authentication.7> Configure Claude Code for enterprise environments with proxy servers, custom Certificate Authorities (CA), and mutual Transport Layer Security (mTLS) authentication.

88* [Claude Code settings](/en/settings)92* [Claude Code settings](/en/settings)

89* [Environment variables reference](/en/settings#environment-variables)93* [Environment variables reference](/en/settings#environment-variables)

90* [Troubleshooting guide](/en/troubleshooting)94* [Troubleshooting guide](/en/troubleshooting)

~~94> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt~~

output-styles.md +6 −7

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Output styles5# Output styles

2 6

3> Adapt Claude Code for uses beyond software engineering7> Adapt Claude Code for uses beyond software engineering

103settings like the model to use, the tools they have available, and some context107settings like the model to use, the tools they have available, and some context

104about when to use the agent.108about when to use the agent.

105 109

106### Output Styles vs. [Custom Slash Commands](/en/slash-commands)110### Output Styles vs. [Skills](/en/skills)

~~107~~

108You can think of output styles as "stored system prompts" and custom slash

109commands as "stored prompts".

~~110~~

~~111~~

112 111

113> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt112Output styles modify how Claude responds (formatting, tone, structure) and are always active once selected. Skills are task-specific prompts that you invoke with `/skill-name` or that Claude loads automatically when relevant. Use output styles for consistent formatting preferences; use skills for reusable workflows and tasks.

overview.md +47 −16

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Claude Code overview5# Claude Code overview

2 6

~~3> Learn about Claude Code, Anthropic's agentic coding tool that lives in your terminal and helps you turn ideas into code faster than ever before.~~7> Learn about Claude Code, Anthropic's agentic coding tool that works in your terminal, IDE, desktop app, and browser to help you turn ideas into code faster than ever before.

4 8

5## Get started in 30 seconds9## Get started in 30 seconds

6 10

7Prerequisites:11Prerequisites:

8 12

~~9* A [Claude.ai](https://claude.ai) (recommended) or [Claude Console](https://console.anthropic.com/) account~~13* Meet the [system requirements](/en/setup#system-requirements)

14* A [Claude subscription](https://claude.com/pricing) (Pro, Max, Teams, or Enterprise) or [Claude Console](https://console.anthropic.com/) account

10 15

11**Install Claude Code:**16**Install Claude Code:**

12 17

31 ```batch theme={null}36 ```batch theme={null}

32 curl -fsSL https://claude.ai/install.cmd -o install.cmd && install.cmd && del install.cmd37 curl -fsSL https://claude.ai/install.cmd -o install.cmd && install.cmd && del install.cmd

33 ```38 ```

40 <Info>

41 Native installations automatically update in the background to keep you on the latest version.

42 </Info>

34 </Tab>43 </Tab>

35 44

36 <Tab title="Homebrew">45 <Tab title="Homebrew">

37 ```sh theme={null}46 ```sh theme={null}

38 brew install --cask claude-code47 brew install --cask claude-code

39 ```48 ```

~~40 </Tab>~~

41 49

~~42 <Tab title="NPM">~~50 <Info>

~~43 If you have [Node.js 18 or newer installed](https://nodejs.org/en/download/):~~51 Homebrew installations do not auto-update. Run `brew upgrade claude-code` periodically to get the latest features and security fixes.

52 </Info>

53 </Tab>

44 54

~~45 ```sh theme={null}~~55 <Tab title="WinGet">

~~46 npm install -g @anthropic-ai/claude-code~~56 ```powershell theme={null}

57 winget install Anthropic.ClaudeCode

47 ```58 ```

60 <Info>

61 WinGet installations do not auto-update. Run `winget upgrade Anthropic.ClaudeCode` periodically to get the latest features and security fixes.

62 </Info>

48 </Tab>63 </Tab>

49</Tabs>64</Tabs>

50 65

58You'll be prompted to log in on first use. That's it! [Continue with Quickstart (5 minutes) →](/en/quickstart)73You'll be prompted to log in on first use. That's it! [Continue with Quickstart (5 minutes) →](/en/quickstart)

59 74

60<Tip>75<Tip>

61 Claude Code automatically keeps itself up to date. See [advanced setup](/en/setup) for installation options, manual updates, or uninstallation instructions. Visit [troubleshooting](/en/troubleshooting) if you hit issues.76 See [advanced setup](/en/setup) for installation options, manual updates, or uninstallation instructions. Visit [troubleshooting](/en/troubleshooting) if you hit issues.

62</Tip>77</Tip>

63 78

79Claude Code also runs in [VS Code](/en/vs-code), [JetBrains IDEs](/en/jetbrains), as a [desktop app](/en/desktop), [on the web](/en/claude-code-on-the-web), and in [Slack](/en/slack). See [all platforms](#use-claude-code-everywhere) below.

64## What Claude Code does for you81## What Claude Code does for you

65 82

66* **Build features from descriptions**: Tell Claude what you want to build in plain English. It will make a plan, write the code, and ensure it works.83* **Build features from descriptions**: Tell Claude what you want to build in plain English. It will make a plan, write the code, and ensure it works.

70 87

71## Why developers love Claude Code88## Why developers love Claude Code

72 89

~~73* **Works in your terminal**: Not another chat window. Not another IDE. Claude Code meets you where you already work, with the tools you already love.~~90* **Meets you where you work**: Use Claude Code in your terminal, your IDE, or a standalone desktop app. It integrates with the tools you already use.

74* **Takes action**: Claude Code can directly edit files, run commands, and create commits. Need more? [MCP](/en/mcp) lets Claude read your design docs in Google Drive, update your tickets in Jira, or use *your* custom developer tooling.91* **Takes action**: Claude Code can directly edit files, run commands, and create commits. Need more? [MCP](/en/mcp) lets Claude read your design docs in Google Drive, update your tickets in Jira, or use *your* custom developer tooling.

75* **Unix philosophy**: Claude Code is composable and scriptable. `tail -f app.log | claude -p "Slack me if you see any anomalies appear in this log stream"` *works*. Your CI can run `claude -p "If there are new text strings, translate them into French and raise a PR for @lang-fr-team to review"`.92* **Unix philosophy**: Claude Code is composable and scriptable. `tail -f app.log | claude -p "Slack me if you see any anomalies appear in this log stream"` *works*. Your CI can run `claude -p "If there are new text strings, translate them into French and raise a PR for @lang-fr-team to review"`.

76* **Enterprise-ready**: Use the Claude API, or host on AWS or GCP. Enterprise-grade [security](/en/security), [privacy](/en/data-usage), and [compliance](https://trust.anthropic.com/) is built-in.93* **Enterprise-ready**: Use the Claude API, or host on AWS or GCP. Enterprise-grade [security](/en/security), [privacy](/en/data-usage), and [compliance](https://trust.anthropic.com/) is built-in.

77 94

95## Use Claude Code everywhere

97Claude Code works across your development environment: in your terminal, in your IDE, in the cloud, and in Slack.

99* **[Terminal (CLI)](/en/quickstart)**: the core Claude Code experience. Run `claude` in any terminal to start coding.

100* **[Claude Code on the web](/en/claude-code-on-the-web)**: use Claude Code from your browser at [claude.ai/code](https://claude.ai/code) or the Claude iOS app, with no local setup required. Run tasks in parallel, work on repos you don't have locally, and review changes in a built-in diff view.

101* **[Desktop app](/en/desktop)**: a standalone application with diff review, parallel sessions via git worktrees, and the ability to launch cloud sessions.

102* **[VS Code](/en/vs-code)**: a native extension with inline diffs, @-mentions, and plan review.

103* **[JetBrains IDEs](/en/jetbrains)**: a plugin for IntelliJ IDEA, PyCharm, WebStorm, and other JetBrains IDEs with IDE diff viewing and context sharing.

104* **[GitHub Actions](/en/github-actions)**: automate code review, issue triage, and other workflows in CI/CD with `@claude` mentions.

105* **[GitLab CI/CD](/en/gitlab-ci-cd)**: event-driven automation for GitLab merge requests and issues.

106* **[Slack](/en/slack)**: mention Claude in Slack to route coding tasks to Claude Code on the web and get PRs back.

107* **[Chrome](/en/chrome)**: connect Claude Code to your browser for live debugging, design verification, and web app testing.

108

78## Next steps109## Next steps

79 110

80<CardGroup>111<CardGroup>

90 Solutions for common issues with Claude Code121 Solutions for common issues with Claude Code

91 </Card>122 </Card>

92 123

~~93 <Card title="IDE setup" icon="laptop" href="/en/vs-code">~~124 <Card title="Desktop app" icon="laptop" href="/en/desktop">

~~94 Add Claude Code to your IDE~~125 Run Claude Code as a standalone application

95 </Card>126 </Card>

96</CardGroup>127</CardGroup>

97 128

98## Additional resources129## Additional resources

99 130

100<CardGroup>131<CardGroup>

101 <Card title="Build with the Agent SDK" icon="code-branch" href="https://docs.claude.com/en/docs/agent-sdk/overview">132 <Card title="About Claude Code" icon="sparkles" href="https://claude.com/product/claude-code">

133 Learn more about Claude Code on claude.com

134 </Card>

135

136 <Card title="Build with the Agent SDK" icon="code-branch" href="https://platform.claude.com/docs/en/agent-sdk/overview">

102 Create custom AI agents with the Claude Agent SDK137 Create custom AI agents with the Claude Agent SDK

103 </Card>138 </Card>

104 139

126 Understand how Claude Code handles your data161 Understand how Claude Code handles your data

127 </Card>162 </Card>

128</CardGroup>163</CardGroup>

~~129~~

~~130~~

~~131~~

132> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

permissions.md +258 −0 added

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

5# Configure permissions

7> Control what Claude Code can access and do with fine-grained permission rules, modes, and managed policies.

9Claude Code supports fine-grained permissions so that you can specify exactly what the agent is allowed to do and what it cannot. Permission settings can be checked into version control and distributed to all developers in your organization, as well as customized by individual developers.

11## Permission system

13Claude Code uses a tiered permission system to balance power and safety:

16| :---------------- | :--------------- | :---------------- | :-------------------------------------------- |

17| Read-only | File reads, Grep | No | N/A |

18| Bash commands | Shell execution | Yes | Permanently per project directory and command |

19| File modification | Edit/write files | Yes | Until session end |

21## Manage permissions

23You can view and manage Claude Code's tool permissions with `/permissions`. This UI lists all permission rules and the settings.json file they are sourced from.

25* **Allow** rules let Claude Code use the specified tool without manual approval.

26* **Ask** rules prompt for confirmation whenever Claude Code tries to use the specified tool.

27* **Deny** rules prevent Claude Code from using the specified tool.

29Rules are evaluated in order: **deny -> ask -> allow**. The first matching rule wins, so deny rules always take precedence.

31## Permission modes

33Claude Code supports several permission modes that control how tools are approved. Set the `defaultMode` in your [settings files](/en/settings#settings-files):

35| Mode | Description |

36| :------------------ | :----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |

37| `default` | Standard behavior: prompts for permission on first use of each tool |

38| `acceptEdits` | Automatically accepts file edit permissions for the session |

39| `plan` | Plan Mode: Claude can analyze but not modify files or execute commands |

40| `delegate` | Coordination-only mode for agent team leads. Restricts the lead to team management tools, so all implementation work happens through teammates. Only available when an agent team is active. See [delegate mode](/en/agent-teams#delegate-mode) for details. |

41| `dontAsk` | Auto-denies tools unless pre-approved via `/permissions` or `permissions.allow` rules |

42| `bypassPermissions` | Skips all permission prompts (requires safe environment, see warning below) |

44<Warning>

45 `bypassPermissions` mode disables all permission checks. Only use this in isolated environments like containers or VMs where Claude Code cannot cause damage. Administrators can prevent this mode by setting `disableBypassPermissionsMode` to `"disable"` in [managed settings](#managed-settings).

46</Warning>

48## Permission rule syntax

50Permission rules follow the format `Tool` or `Tool(specifier)`.

52### Match all uses of a tool

54To match all uses of a tool, use just the tool name without parentheses:

56| Rule | Effect |

57| :--------- | :----------------------------- |

58| `Bash` | Matches all Bash commands |

59| `WebFetch` | Matches all web fetch requests |

60| `Read` | Matches all file reads |

62`Bash(*)` is equivalent to `Bash` and matches all Bash commands.

64### Use specifiers for fine-grained control

66Add a specifier in parentheses to match specific tool uses:

68| Rule | Effect |

69| :----------------------------- | :------------------------------------------------------- |

70| `Bash(npm run build)` | Matches the exact command `npm run build` |

71| `Read(./.env)` | Matches reading the `.env` file in the current directory |

72| `WebFetch(domain:example.com)` | Matches fetch requests to example.com |

74### Wildcard patterns

76Bash rules support glob patterns with `*`. Wildcards can appear at any position in the command. This configuration allows npm and git commit commands while blocking git push:

78```json theme={null}

79{

80 "permissions": {

81 "allow": [

82 "Bash(npm run *)",

83 "Bash(git commit *)",

84 "Bash(git * main)",

85 "Bash(* --version)",

86 "Bash(* --help *)"

87 ],

88 "deny": [

89 "Bash(git push *)"

90 ]

91 }

92}

93```

95The space before `*` matters: `Bash(ls *)` matches `ls -la` but not `lsof`, while `Bash(ls*)` matches both. The legacy `:*` suffix syntax is equivalent to ` *` but is deprecated.

97## Tool-specific permission rules

99### Bash

100

101Bash permission rules support wildcard matching with `*`. Wildcards can appear at any position in the command, including at the beginning, middle, or end:

102

103* `Bash(npm run build)` matches the exact Bash command `npm run build`

104* `Bash(npm run test *)` matches Bash commands starting with `npm run test`

105* `Bash(npm *)` matches any command starting with `npm `

106* `Bash(* install)` matches any command ending with ` install`

107* `Bash(git * main)` matches commands like `git checkout main`, `git merge main`

108

109When `*` appears at the end with a space before it (like `Bash(ls *)`), it enforces a word boundary, requiring the prefix to be followed by a space or end-of-string. For example, `Bash(ls *)` matches `ls -la` but not `lsof`. In contrast, `Bash(ls*)` without a space matches both `ls -la` and `lsof` because there's no word boundary constraint.

110

111<Tip>

112 Claude Code is aware of shell operators (like `&&`) so a prefix match rule like `Bash(safe-cmd *)` won't give it permission to run the command `safe-cmd && other-cmd`.

113</Tip>

114

115<Warning>

116 Bash permission patterns that try to constrain command arguments are fragile. For example, `Bash(curl http://github.com/ *)` intends to restrict curl to GitHub URLs, but won't match variations like:

117

118 * Options before URL: `curl -X GET http://github.com/...`

119 * Different protocol: `curl https://github.com/...`

120 * Redirects: `curl -L http://bit.ly/xyz` (redirects to github)

121 * Variables: `URL=http://github.com && curl $URL`

122 * Extra spaces: `curl http://github.com`

123

124 For more reliable URL filtering, consider:

125

126 * **Restrict Bash network tools**: use deny rules to block `curl`, `wget`, and similar commands, then use the WebFetch tool with `WebFetch(domain:github.com)` permission for allowed domains

127 * **Use PreToolUse hooks**: implement a hook that validates URLs in Bash commands and blocks disallowed domains

128 * Instructing Claude Code about your allowed curl patterns via CLAUDE.md

129

130 Note that using WebFetch alone does not prevent network access. If Bash is allowed, Claude can still use `curl`, `wget`, or other tools to reach any URL.

131</Warning>

132

133### Read and Edit

134

135`Edit` rules apply to all built-in tools that edit files. Claude makes a best-effort attempt to apply `Read` rules to all built-in tools that read files like Grep and Glob.

136

137Read and Edit rules both follow the [gitignore](https://git-scm.com/docs/gitignore) specification with four distinct pattern types:

138

140| ------------------ | -------------------------------------- | -------------------------------- | ---------------------------------- |

141| `//path` | **Absolute** path from filesystem root | `Read(//Users/alice/secrets/**)` | `/Users/alice/secrets/**` |

142| `~/path` | Path from **home** directory | `Read(~/Documents/*.pdf)` | `/Users/alice/Documents/*.pdf` |

143| `/path` | Path **relative to settings file** | `Edit(/src/**/*.ts)` | `<settings file path>/src/**/*.ts` |

144| `path` or `./path` | Path **relative to current directory** | `Read(*.env)` | `<cwd>/*.env` |

145

146<Warning>

147 A pattern like `/Users/alice/file` is NOT an absolute path. It's relative to your settings file. Use `//Users/alice/file` for absolute paths.

148</Warning>

149

150Examples:

151

152* `Edit(/docs/**)`: edits in `<project>/docs/` (NOT `/docs/`)

153* `Read(~/.zshrc)`: reads your home directory's `.zshrc`

154* `Edit(//tmp/scratch.txt)`: edits the absolute path `/tmp/scratch.txt`

155* `Read(src/**)`: reads from `<current-directory>/src/`

156

157<Note>

158 In gitignore patterns, `*` matches files in a single directory while `**` matches recursively across directories. To allow all file access, use just the tool name without parentheses: `Read`, `Edit`, or `Write`.

159</Note>

160

161### WebFetch

162

163* `WebFetch(domain:example.com)` matches fetch requests to example.com

164

165### MCP

166

167* `mcp__puppeteer` matches any tool provided by the `puppeteer` server (name configured in Claude Code)

168* `mcp__puppeteer__*` wildcard syntax that also matches all tools from the `puppeteer` server

169* `mcp__puppeteer__puppeteer_navigate` matches the `puppeteer_navigate` tool provided by the `puppeteer` server

170

171### Task (subagents)

172

173Use `Task(AgentName)` rules to control which [subagents](/en/sub-agents) Claude can use:

174

175* `Task(Explore)` matches the Explore subagent

176* `Task(Plan)` matches the Plan subagent

177* `Task(my-custom-agent)` matches a custom subagent named `my-custom-agent`

178

179Add these rules to the `deny` array in your settings or use the `--disallowedTools` CLI flag to disable specific agents. To disable the Explore agent:

180

181```json theme={null}

182{

183 "permissions": {

184 "deny": ["Task(Explore)"]

185 }

186}

187```

188

189## Extend permissions with hooks

190

191[Claude Code hooks](/en/hooks-guide) provide a way to register custom shell commands to perform permission evaluation at runtime. When Claude Code makes a tool call, PreToolUse hooks run before the permission system, and the hook output can determine whether to approve or deny the tool call in place of the permission system.

192

193## Working directories

194

195By default, Claude has access to files in the directory where it was launched. You can extend this access:

196

197* **During startup**: use `--add-dir <path>` CLI argument

198* **During session**: use `/add-dir` command

199* **Persistent configuration**: add to `additionalDirectories` in [settings files](/en/settings#settings-files)

200

201Files in additional directories follow the same permission rules as the original working directory: they become readable without prompts, and file editing permissions follow the current permission mode.

202

203## How permissions interact with sandboxing

204

205Permissions and [sandboxing](/en/sandboxing) are complementary security layers:

206

207* **Permissions** control which tools Claude Code can use and which files or domains it can access. They apply to all tools (Bash, Read, Edit, WebFetch, MCP, and others).

208* **Sandboxing** provides OS-level enforcement that restricts the Bash tool's filesystem and network access. It applies only to Bash commands and their child processes.

209

210Use both for defense-in-depth:

211

212* Permission deny rules block Claude from even attempting to access restricted resources

213* Sandbox restrictions prevent Bash commands from reaching resources outside defined boundaries, even if a prompt injection bypasses Claude's decision-making

214* Filesystem restrictions in the sandbox use Read and Edit deny rules, not separate sandbox configuration

215* Network restrictions combine WebFetch permission rules with the sandbox's `allowedDomains` list

216

217## Managed settings

218

219For organizations that need centralized control over Claude Code configuration, administrators can deploy `managed-settings.json` files to system directories. These policy files follow the same format as regular settings files and cannot be overridden by user or project settings.

220

221**Managed settings file locations**:

222

223* **macOS**: `/Library/Application Support/ClaudeCode/managed-settings.json`

224* **Linux and WSL**: `/etc/claude-code/managed-settings.json`

225* **Windows**: `C:\Program Files\ClaudeCode\managed-settings.json`

226

227<Note>

228 These are system-wide paths (not user home directories like `~/Library/...`) that require administrator privileges. They are designed to be deployed by IT administrators.

229</Note>

230

231### Managed-only settings

232

233Some settings are only effective in managed settings:

234

235| Setting | Description |

236| :-------------------------------- | :------------------------------------------------------------------------------------------------------------------------------------------------- |

237| `disableBypassPermissionsMode` | Set to `"disable"` to prevent `bypassPermissions` mode and the `--dangerously-skip-permissions` flag |

238| `allowManagedPermissionRulesOnly` | When `true`, prevents user and project settings from defining `allow`, `ask`, or `deny` permission rules. Only rules in managed settings apply |

239| `allowManagedHooksOnly` | When `true`, prevents loading of user, project, and plugin hooks. Only managed hooks and SDK hooks are allowed |

240| `strictKnownMarketplaces` | Controls which plugin marketplaces users can add. See [managed marketplace restrictions](/en/plugin-marketplaces#managed-marketplace-restrictions) |

241

242## Settings precedence

243

244Permission rules follow the same [settings precedence](/en/settings#settings-precedence) as all other Claude Code settings: managed settings have the highest precedence, followed by command line arguments, local project, shared project, and user settings.

245

246If a permission is allowed in user settings but denied in project settings, the project setting takes precedence and the permission is blocked.

247

248## Example configurations

249

250This [repository](https://github.com/anthropics/claude-code/tree/main/examples/settings) includes starter settings configurations for common deployment scenarios. Use these as starting points and adjust them to fit your needs.

251

252## See also

253

254* [Settings](/en/settings): complete configuration reference including the permission settings table

255* [Sandboxing](/en/sandboxing): OS-level filesystem and network isolation for Bash commands

256* [Authentication](/en/authentication): set up user access to Claude Code

257* [Security](/en/security): security safeguards and best practices

258* [Hooks](/en/hooks-guide): automate workflows and extend permission evaluation

plugin-marketplaces.md +354 −286

Details

~~1# Plugin marketplaces~~1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

2 4

~~3> Create and manage plugin marketplaces to distribute Claude Code extensions across teams and communities.~~5# Create and distribute a plugin marketplace

4 6

5Plugin marketplaces are catalogs of available plugins that make it easy to discover, install, and manage Claude Code extensions. This guide shows you how to use existing marketplaces and create your own for team distribution.7> Build and host plugin marketplaces to distribute Claude Code extensions across teams and communities.

6 8

~~7## Overview~~9A plugin marketplace is a catalog that lets you distribute plugins to others. Marketplaces provide centralized discovery, version tracking, automatic updates, and support for multiple source types (git repositories, local paths, and more). This guide shows you how to create your own marketplace to share plugins with your team or community.

~~9A marketplace is a JSON file that lists available plugins and describes where to find them. Marketplaces provide:~~

~~11* **Centralized discovery**: Browse plugins from multiple sources in one place~~

~~12* **Version management**: Track and update plugin versions automatically~~

~~13* **Automatic updates**: Keep plugins current with [per-marketplace auto-update settings](#auto-update-settings)~~

~~14* **Team distribution**: Share required plugins across your organization~~

~~15* **Flexible sources**: Support for git repositories, GitHub repos, local paths, and package managers~~

~~17### Prerequisites~~

~~19* Claude Code installed and running~~

~~20* Basic familiarity with JSON file format~~

~~21* For creating marketplaces: Git repository or local development environment~~

~~23## Add and use marketplaces~~

~~25Add marketplaces using the `/plugin marketplace` commands to access plugins from different sources:~~

~~27### Add GitHub marketplaces~~

~~29```shell Add a GitHub repository containing .claude-plugin/marketplace.json theme={null}~~

~~30/plugin marketplace add owner/repo~~

~~31```~~

~~33### Add Git repositories~~

~~35```shell Add any git repository theme={null}~~

~~36/plugin marketplace add https://gitlab.com/company/plugins.git~~

~~37```~~

~~39### Add local marketplaces for development~~

~~41```shell Add local directory containing .claude-plugin/marketplace.json theme={null}~~

~~42/plugin marketplace add ./my-marketplace~~

~~43```~~

44 10

~~45```shell Add direct path to marketplace.json file theme={null}~~11Looking to install plugins from an existing marketplace? See [Discover and install prebuilt plugins](/en/discover-plugins).

~~46/plugin marketplace add ./path/to/marketplace.json~~

~~47```~~

~~49```shell Add remote marketplace.json via URL theme={null}~~

~~50/plugin marketplace add https://url.of/marketplace.json~~

~~51```~~

52 12

~~53### Install plugins from marketplaces~~13## Overview

54 14

~~55Once you've added marketplaces, install plugins directly:~~15Creating and distributing a marketplace involves:

56 16

~~57```shell Install from any known marketplace theme={null}~~171. **Creating plugins**: build one or more plugins with commands, agents, hooks, MCP servers, or LSP servers. This guide assumes you already have plugins to distribute; see [Create plugins](/en/plugins) for details on how to create them.

~~58/plugin install plugin-name@marketplace-name~~182. **Creating a marketplace file**: define a `marketplace.json` that lists your plugins and where to find them (see [Create the marketplace file](#create-the-marketplace-file)).

~~59```~~193. **Host the marketplace**: push to GitHub, GitLab, or another git host (see [Host and distribute marketplaces](#host-and-distribute-marketplaces)).

204. **Share with users**: users add your marketplace with `/plugin marketplace add` and install individual plugins (see [Discover and install plugins](/en/discover-plugins)).

60 21

~~61```shell Browse available plugins interactively theme={null}~~22Once your marketplace is live, you can update it by pushing changes to your repository. Users refresh their local copy with `/plugin marketplace update`.

~~62/plugin~~

~~63```~~

64 23

~~65### Verify marketplace installation~~24## Walkthrough: create a local marketplace

66 25

~~67After adding a marketplace:~~26This example creates a marketplace with one plugin: a `/review` skill for code reviews. You'll create the directory structure, add a skill, create the plugin manifest and marketplace catalog, then install and test it.

68 27

~~691. **List marketplaces**: Run `/plugin marketplace list` to confirm it's added~~28<Steps>

~~702. **Browse plugins**: Use `/plugin` to see available plugins from your marketplace~~29 <Step title="Create the directory structure">

~~713. **Test installation**: Try installing a plugin to verify the marketplace works correctly~~30 ```bash theme={null}

31 mkdir -p my-marketplace/.claude-plugin

32 mkdir -p my-marketplace/plugins/review-plugin/.claude-plugin

33 mkdir -p my-marketplace/plugins/review-plugin/skills/review

34 ```

35 </Step>

72 36

~~73### Example plugin marketplace~~37 <Step title="Create the skill">

38 Create a `SKILL.md` file that defines what the `/review` skill does.

74 39

~~75Claude Code maintains a marketplace of [demo plugins](https://github.com/anthropics/claude-code/tree/main/plugins). These plugins are examples of what's possible with the plugin system.~~40 ```markdown my-marketplace/plugins/review-plugin/skills/review/SKILL.md theme={null}

41 ---

42 description: Review code for bugs, security, and performance

43 disable-model-invocation: true

44 ---

76 45

~~77```shell Add the marketplace theme={null}~~46 Review the code I've selected or the recent changes for:

~~78/plugin marketplace add anthropics/claude-code~~47 - Potential bugs or edge cases

~~79```~~48 - Security concerns

49 - Performance issues

50 - Readability improvements

80 51

~~81## Configure team marketplaces~~52 Be concise and actionable.

53 ```

54 </Step>

82 55

~~83Set up automatic marketplace installation for team projects by specifying required marketplaces in `.claude/settings.json`:~~56 <Step title="Create the plugin manifest">

57 Create a `plugin.json` file that describes the plugin. The manifest goes in the `.claude-plugin/` directory.

84 58

~~85```json theme={null}~~59 ```json my-marketplace/plugins/review-plugin/.claude-plugin/plugin.json theme={null}

~~86{~~60 {

~~87 "extraKnownMarketplaces": {~~61 "name": "review-plugin",

~~88 "team-tools": {~~62 "description": "Adds a /review skill for quick code reviews",

~~89 "source": {~~63 "version": "1.0.0"

~~90 "source": "github",~~

~~91 "repo": "your-org/claude-plugins"~~

~~92 }~~

~~93 },~~

~~94 "project-specific": {~~

~~95 "source": {~~

~~96 "source": "git",~~

~~97 "url": "https://git.company.com/project-plugins.git"~~

~~98 }~~

~~99 }~~

100 }64 }

101}65 ```

102```66 </Step>

~~103~~

104When team members trust the repository folder, Claude Code automatically installs these marketplaces and any plugins specified in the `enabledPlugins` field.

105 67

106## Enterprise marketplace restrictions68 <Step title="Create the marketplace file">

69 Create the marketplace catalog that lists your plugin.

107 70

108For organizations requiring strict control over plugin sources, enterprise administrators can restrict which plugin marketplaces users are allowed to add using the `strictKnownMarketplaces` setting in managed settings.71 ```json my-marketplace/.claude-plugin/marketplace.json theme={null}

~~109~~

110**Managed settings file locations**:

~~111~~

112* **macOS**: `/Library/Application Support/ClaudeCode/managed-settings.json`

113* **Linux and WSL**: `/etc/claude-code/managed-settings.json`

114* **Windows**: `C:\ProgramData\ClaudeCode\managed-settings.json`

~~115~~

116**Restriction behavior**:

~~117~~

118When `strictKnownMarketplaces` is configured in managed settings:

~~119~~

120* **Undefined** (default): No restrictions - users can add any marketplace

121* **Empty array `[]`**: Complete lockdown - users cannot add any new marketplaces

122* **List of sources**: Users can only add marketplaces that match the allowlist exactly

~~123~~

124**Basic examples**:

~~125~~

126Disable all marketplace additions:

~~127~~

128```json theme={null}

129{

130 "strictKnownMarketplaces": []

131}

132```

~~133~~

134Allow specific marketplaces only:

~~135~~

136```json theme={null}

137{

138 "strictKnownMarketplaces": [

139 {72 {

140 "source": "github",73 "name": "my-plugins",

141 "repo": "company/approved-plugins"74 "owner": {

142 },75 "name": "Your Name"

143 {

144 "source": "github",

145 "repo": "company/security-tools",

146 "ref": "v2.0"

147 },76 },

77 "plugins": [

148 {78 {

149 "source": "url",79 "name": "review-plugin",

150 "url": "https://internal.company.com/plugins/marketplace.json"80 "source": "./plugins/review-plugin",

81 "description": "Adds a /review skill for quick code reviews"

151 }82 }

152 ]83 ]

153}84 }

154```85 ```

86 </Step>

155 87

156**Key characteristics**:88 <Step title="Add and install">

89 Add the marketplace and install the plugin.

157 90

158* Enforced BEFORE network/filesystem operations91 ```shell theme={null}

159* Uses exact matching (including optional `ref` and `path` fields for git sources)92 /plugin marketplace add ./my-marketplace

160* Cannot be overridden by user or project settings93 /plugin install review-plugin@my-plugins

161* Only affects adding NEW marketplaces (previously installed marketplaces still work)94 ```

95 </Step>

162 96

163See [strictKnownMarketplaces reference](/en/settings#strictknownmarketplaces) for complete configuration details, including all six supported source types, exact matching rules, and comparison with `extraKnownMarketplaces`.97 <Step title="Try it out">

98 Select some code in your editor and run your new command.

164 99

165***100 ```shell theme={null}

101 /review

102 ```

103 </Step>

104</Steps>

166 105

167## Create your own marketplace106To learn more about what plugins can do, including hooks, agents, MCP servers, and LSP servers, see [Plugins](/en/plugins).

168 107

169Build and distribute custom plugin collections for your team or community.108<Note>

109 **How plugins are installed**: When users install a plugin, Claude Code copies the plugin directory to a cache location. This means plugins can't reference files outside their directory using paths like `../shared-utils`, because those files won't be copied.

170 110

171### Prerequisites for marketplace creation111 If you need to share files across plugins, use symlinks (which are followed during copying) or restructure your marketplace so the shared directory is inside the plugin source path. See [Plugin caching and file resolution](/en/plugins-reference#plugin-caching-and-file-resolution) for details.

112</Note>

172 113

173* Git repository (GitHub, GitLab, or other git hosting)114## Create the marketplace file

174* Understanding of JSON file format

175* One or more plugins to distribute

176 115

177### Create the marketplace file116Create `.claude-plugin/marketplace.json` in your repository root. This file defines your marketplace's name, owner information, and a list of plugins with their sources.

178 117

179Create `.claude-plugin/marketplace.json` in your repository root:118Each plugin entry needs at minimum a `name` and `source` (where to fetch it from). See the [full schema](#marketplace-schema) below for all available fields.

180 119

181```json theme={null}120```json theme={null}

182{121{

183 "name": "company-tools",122 "name": "company-tools",

184 "owner": {123 "owner": {

185 "name": "DevTools Team",124 "name": "DevTools Team",

186 "email": "devtools@company.com"125 "email": "devtools@example.com"

187 },126 },

188 "plugins": [127 "plugins": [

189 {128 {

207}146}

208```147```

209 148

210### Marketplace schema149## Marketplace schema

211 150

212#### Required fields151### Required fields

213 152

215| :-------- | :----- | :--------------------------------------------- |154| :-------- | :----- | :--------------------------------------------------------------------------------------------------------------------------------------------------------------------- | :------------- |

158

159<Note>

160 **Reserved names**: The following marketplace names are reserved for official Anthropic use and cannot be used by third-party marketplaces: `claude-code-marketplace`, `claude-code-plugins`, `claude-plugins-official`, `anthropic-marketplace`, `anthropic-plugins`, `agent-skills`, `life-sciences`. Names that impersonate official marketplaces (like `official-claude-plugins` or `anthropic-tools-v2`) are also blocked.

161</Note>

162

163### Owner fields

164

166| :------ | :----- | :------- | :------------------------------- |

219 169

220#### Optional metadata170### Optional metadata

221 171

223| :--------------------- | :----- | :------------------------------------ |173| :--------------------- | :----- | :------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |

227 177

228### Plugin entries178## Plugin entries

229 179

230<Note>180Each plugin entry in the `plugins` array describes a plugin and where to find it. You can include any field from the [plugin manifest schema](/en/plugins-reference#plugin-manifest-schema) (like `description`, `version`, `author`, `commands`, `hooks`, etc.), plus these marketplace-specific fields: `source`, `category`, `tags`, and `strict`.

231 Plugin entries are based on the *plugin manifest schema* (with all fields made

232 optional) plus marketplace-specific fields (`source`, `category`, `tags`,

233 `strict`), with `name` being required.

234</Note>

235 181

236**Required fields:**182### Required fields

237 183

239| :------- | :------------- | :---------------------------------------- |185| :------- | :------------- | :----------------------------------------------------------------------------------------------------------------------------------------------------- |

242 188

243#### Optional plugin fields189### Optional plugin fields

244 190

245**Standard metadata fields:**191**Standard metadata fields:**

246 192

248| :------------ | :------ | :---------------------------------------------------------------- |194| :------------ | :------ | :----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |

259 205

260**Component configuration fields:**206**Component configuration fields:**

261 207

268 215

269*<sup>1 - When `strict: true` (default), the plugin must include a `plugin.json` manifest file, and marketplace fields supplement those values. When `strict: false`, the plugin.json is optional. If it's missing, the marketplace entry serves as the complete plugin manifest.</sup>*216## Plugin sources

270 217

271### Plugin sources218### Relative paths

~~272~~

273#### Relative paths

274 219

275For plugins in the same repository:220For plugins in the same repository:

276 221

281}226}

282```227```

283 228

284#### GitHub repositories229<Note>

230 Relative paths only work when users add your marketplace via Git (GitHub, GitLab, or git URL). If users add your marketplace via a direct URL to the `marketplace.json` file, relative paths will not resolve correctly. For URL-based distribution, use GitHub, npm, or git URL sources instead. See [Troubleshooting](#plugins-with-relative-paths-fail-in-url-based-marketplaces) for details.

231</Note>

232

233### GitHub repositories

285 234

286```json theme={null}235```json theme={null}

287{236{

293}242}

294```243```

295 244

296#### Git repositories245You can pin to a specific branch, tag, or commit:

246

247```json theme={null}

248{

249 "name": "github-plugin",

250 "source": {

251 "source": "github",

252 "repo": "owner/plugin-repo",

253 "ref": "v2.0.0",

254 "sha": "a1b2c3d4e5f6a7b8c9d0e1f2a3b4c5d6e7f8a9b0"

255 }

256}

257```

258

259| Field | Type | Description |

260| :----- | :----- | :-------------------------------------------------------------------- |

261| `repo` | string | Required. GitHub repository in `owner/repo` format |

262| `ref` | string | Optional. Git branch or tag (defaults to repository default branch) |

263| `sha` | string | Optional. Full 40-character git commit SHA to pin to an exact version |

264

265### Git repositories

297 266

298```json theme={null}267```json theme={null}

299{268{

305}274}

306```275```

307 276

308#### Advanced plugin entries277You can pin to a specific branch, tag, or commit:

278

279```json theme={null}

280{

281 "name": "git-plugin",

282 "source": {

283 "source": "url",

284 "url": "https://gitlab.com/team/plugin.git",

285 "ref": "main",

286 "sha": "a1b2c3d4e5f6a7b8c9d0e1f2a3b4c5d6e7f8a9b0"

287 }

288}

289```

290

291| Field | Type | Description |

292| :---- | :----- | :-------------------------------------------------------------------- |

293| `url` | string | Required. Full git repository URL (must end with `.git`) |

294| `ref` | string | Optional. Git branch or tag (defaults to repository default branch) |

295| `sha` | string | Optional. Full 40-character git commit SHA to pin to an exact version |

309 296

310Plugin entries can override default component locations and provide additional metadata. Note that `${CLAUDE_PLUGIN_ROOT}` is an environment variable that resolves to the plugin's installation directory (for details see [Environment variables](/en/plugins-reference#environment-variables)):297### Advanced plugin entries

298

299This example shows a plugin entry using many of the optional fields, including custom paths for commands, agents, hooks, and MCP servers:

311 300

312```json theme={null}301```json theme={null}

313{302{

320 "version": "2.1.0",309 "version": "2.1.0",

321 "author": {310 "author": {

322 "name": "Enterprise Team",311 "name": "Enterprise Team",

323 "email": "enterprise@company.com"312 "email": "enterprise@example.com"

324 },313 },

325 "homepage": "https://docs.company.com/plugins/enterprise-tools",314 "homepage": "https://docs.example.com/plugins/enterprise-tools",

326 "repository": "https://github.com/company/enterprise-plugin",315 "repository": "https://github.com/company/enterprise-plugin",

327 "license": "MIT",316 "license": "MIT",

328 "keywords": ["enterprise", "workflow", "automation"],317 "keywords": ["enterprise", "workflow", "automation"],

356}345}

357```346```

358 347

359<Note>348Key things to notice:

360 **Schema relationship**: Plugin entries use the plugin manifest schema with

361 all fields made optional, plus marketplace-specific fields (`source`,

362 `strict`, `category`, `tags`). This means any field valid in a `plugin.json`

363 file can also be used in a marketplace entry. When `strict: false`, the

364 marketplace entry serves as the complete plugin manifest if no `plugin.json`

365 exists. When `strict: true` (default), marketplace fields supplement the

366 plugin's own manifest file.

367</Note>

368 349

369***350* **`commands` and `agents`**: You can specify multiple directories or individual files. Paths are relative to the plugin root.

351* **`${CLAUDE_PLUGIN_ROOT}`**: Use this variable in hooks and MCP server configs to reference files within the plugin's installation directory. This is necessary because plugins are copied to a cache location when installed.

352* **`strict: false`**: Since this is set to false, the plugin doesn't need its own `plugin.json`. The marketplace entry defines everything.

370 353

371## Host and distribute marketplaces354## Host and distribute marketplaces

372 355

373Choose the best hosting strategy for your plugin distribution needs.

~~374~~

375### Host on GitHub (recommended)356### Host on GitHub (recommended)

376 357

377GitHub provides the easiest distribution method:358GitHub provides the easiest distribution method:

378 359

3791. **Create a repository**: Set up a new repository for your marketplace3601. **Create a repository**: Set up a new repository for your marketplace

3802. **Add marketplace file**: Create `.claude-plugin/marketplace.json` with your plugin definitions3612. **Add marketplace file**: Create `.claude-plugin/marketplace.json` with your plugin definitions

3813. **Share with teams**: Team members add with `/plugin marketplace add owner/repo`3623. **Share with teams**: Users add your marketplace with `/plugin marketplace add owner/repo`

382 363

383**Benefits**: Built-in version control, issue tracking, and team collaboration features.364**Benefits**: Built-in version control, issue tracking, and team collaboration features.

384 365

385### Host on other git services366### Host on other git services

386 367

387Any git hosting service works for marketplace distribution, using a URL to an arbitrary git repository.368Any git hosting service works, such as GitLab, Bitbucket, and self-hosted servers. Users add with the full repository URL:

~~388~~

389For example, using GitLab:

390 369

391```shell theme={null}370```shell theme={null}

392/plugin marketplace add https://gitlab.com/company/plugins.git371/plugin marketplace add https://gitlab.com/company/plugins.git

393```372```

394 373

395### Use local marketplaces for development374### Private repositories

396 375

397Test your marketplace locally before distribution:376Claude Code supports installing plugins from private repositories. For manual installation and updates, Claude Code uses your existing git credential helpers. If `git clone` works for a private repository in your terminal, it works in Claude Code too. Common credential helpers include `gh auth login` for GitHub, macOS Keychain, and `git-credential-store`.

398 377

399```shell Add local marketplace for testing theme={null}378Background auto-updates run at startup without credential helpers, since interactive prompts would block Claude Code from starting. To enable auto-updates for private marketplaces, set the appropriate authentication token in your environment:

400/plugin marketplace add ./my-local-marketplace379

380| Provider | Environment variables | Notes |

381| :-------- | :--------------------------- | :---------------------------------------- |

382| GitHub | `GITHUB_TOKEN` or `GH_TOKEN` | Personal access token or GitHub App token |

383| GitLab | `GITLAB_TOKEN` or `GL_TOKEN` | Personal access token or project token |

384| Bitbucket | `BITBUCKET_TOKEN` | App password or repository access token |

385

386Set the token in your shell configuration (for example, `.bashrc`, `.zshrc`) or pass it when running Claude Code:

387

388```bash theme={null}

389export GITHUB_TOKEN=ghp_xxxxxxxxxxxxxxxxxxxx

401```390```

402 391

403```shell Test plugin installation theme={null}392<Note>

393 For CI/CD environments, configure the token as a secret environment variable. GitHub Actions automatically provides `GITHUB_TOKEN` for repositories in the same organization.

394</Note>

395

396### Test locally before distribution

397

398Test your marketplace locally before sharing:

399

400```shell theme={null}

401/plugin marketplace add ./my-local-marketplace

404/plugin install test-plugin@my-local-marketplace402/plugin install test-plugin@my-local-marketplace

405```403```

406 404

407## Manage marketplace operations405For the full range of add commands (GitHub, Git URLs, local paths, remote URLs), see [Add marketplaces](/en/discover-plugins#add-marketplaces).

408 406

409### List known marketplaces407### Require marketplaces for your team

410 408

411```shell List all configured marketplaces theme={null}409You can configure your repository so team members are automatically prompted to install your marketplace when they trust the project folder. Add your marketplace to `.claude/settings.json`:

412/plugin marketplace list

413```

414 410

415Shows all configured marketplaces with their sources and status.411```json theme={null}

412{

413 "extraKnownMarketplaces": {

414 "company-tools": {

415 "source": {

416 "source": "github",

417 "repo": "your-org/claude-plugins"

418 }

419 }

420 }

421}

422```

416 423

417### Update marketplace metadata424You can also specify which plugins should be enabled by default:

418 425

419```shell Refresh marketplace metadata theme={null}426```json theme={null}

420/plugin marketplace update marketplace-name427{

428 "enabledPlugins": {

429 "code-formatter@company-tools": true,

430 "deployment-tools@company-tools": true

431 }

432}

421```433```

422 434

423Refreshes plugin listings and metadata from the marketplace source.435For full configuration options, see [Plugin settings](/en/settings#plugin-settings).

436

437### Managed marketplace restrictions

438

439For organizations requiring strict control over plugin sources, administrators can restrict which plugin marketplaces users are allowed to add using the [`strictKnownMarketplaces`](/en/settings#strictknownmarketplaces) setting in managed settings.

440

441When `strictKnownMarketplaces` is configured in managed settings, the restriction behavior depends on the value:

424 442

425### Remove a marketplace443| Value | Behavior |

444| ------------------- | ---------------------------------------------------------------- |

445| Undefined (default) | No restrictions. Users can add any marketplace |

446| Empty array `[]` | Complete lockdown. Users cannot add any new marketplaces |

447| List of sources | Users can only add marketplaces that match the allowlist exactly |

426 448

427```shell Remove a marketplace theme={null}449#### Common configurations

428/plugin marketplace remove marketplace-name450

451Disable all marketplace additions:

452

453```json theme={null}

454{

455 "strictKnownMarketplaces": []

456}

429```457```

430 458

431Removes the marketplace from your configuration.459Allow specific marketplaces only:

432 460

433<Warning>461```json theme={null}

434 Removing a marketplace will uninstall any plugins you installed from it.462{

435</Warning>463 "strictKnownMarketplaces": [

464 {

465 "source": "github",

466 "repo": "acme-corp/approved-plugins"

467 },

468 {

469 "source": "github",

470 "repo": "acme-corp/security-tools",

471 "ref": "v2.0"

472 },

473 {

474 "source": "url",

475 "url": "https://plugins.example.com/marketplace.json"

476 }

477 ]

478}

479```

436 480

437***481Allow all marketplaces from an internal git server using regex pattern matching:

438 482

439## Auto-update settings483```json theme={null}

484{

485 "strictKnownMarketplaces": [

486 {

487 "source": "hostPattern",

488 "hostPattern": "^github\\.example\\.com$"

489 }

490 ]

491}

492```

440 493

441Claude Code can automatically update marketplaces and their installed plugins at startup. This keeps your plugins current without manual intervention.494#### How restrictions work

442 495

443### How auto-update works496Restrictions are validated early in the plugin installation process, before any network requests or filesystem operations occur. This prevents unauthorized marketplace access attempts.

444 497

445When auto-update is enabled for a marketplace:498The allowlist uses exact matching for most source types. For a marketplace to be allowed, all specified fields must match exactly:

446 499

4471. **Marketplace refresh**: Claude Code pulls the latest marketplace data (git pull or re-download)500* For GitHub sources: `repo` is required, and `ref` or `path` must also match if specified in the allowlist

4482. **Plugin updates**: Installed plugins from that marketplace are updated to their latest versions501* For URL sources: the full URL must match exactly

4493. **Notification**: If any plugins were updated, you'll see a notification suggesting a restart502* For `hostPattern` sources: the marketplace host is matched against the regex pattern

450 503

451### Configure auto-update per marketplace504Because `strictKnownMarketplaces` is set in [managed settings](/en/settings#settings-files), individual users and project configurations cannot override these restrictions.

452 505

453Toggle auto-update for individual marketplaces through the UI:506For complete configuration details including all supported source types and comparison with `extraKnownMarketplaces`, see the [strictKnownMarketplaces reference](/en/settings#strictknownmarketplaces).

454 507

4551. Run `/plugin` to open the plugin manager508## Validation and testing

4562. Select **Marketplaces**

4573. Choose a marketplace from the list

4584. Select **Enable auto-update** or **Disable auto-update**

459 509

460<Note>510Test your marketplace before sharing.

461 Official Anthropic marketplaces have auto-update enabled by default. You can disable this if you prefer manual updates.

462</Note>

463 511

464### Auto-update behavior512Validate your marketplace JSON syntax:

465 513

466| Marketplace type | Default behavior |514```bash theme={null}

467| :------------------------------ | :------------------- |515claude plugin validate .

468| Official Anthropic marketplaces | Auto-update enabled |516```

469| Third-party marketplaces | Auto-update disabled |

470| Local development marketplaces | Auto-update disabled |

471 517

472### Disable auto-update globally518Or from within Claude Code:

473 519

474To disable all automatic updates (both Claude Code and plugins), set the `DISABLE_AUTOUPDATER` environment variable. See [Auto updates](/en/setup#auto-updates) for details.520```shell theme={null}

521/plugin validate .

522```

475 523

476When auto-updates are disabled globally:524Add the marketplace for testing:

477 525

478* No marketplaces or plugins will auto-update526```shell theme={null}

479* The auto-update toggle is hidden in the UI527/plugin marketplace add ./path/to/marketplace

480* You can still manually update using `/plugin marketplace update`528```

481 529

482***530Install a test plugin to verify everything works:

483 531

484## Troubleshooting marketplaces532```shell theme={null}

533/plugin install test-plugin@marketplace-name

534```

535

536For complete plugin testing workflows, see [Test your plugins locally](/en/plugins#test-your-plugins-locally). For technical troubleshooting, see [Plugins reference](/en/plugins-reference).

485 537

486### Common marketplace issues538## Troubleshooting

487 539

488#### Marketplace not loading540### Marketplace not loading

489 541

490**Symptoms**: Can't add marketplace or see plugins from it542**Symptoms**: Can't add marketplace or see plugins from it

491 543

493 545

494* Verify the marketplace URL is accessible546* Verify the marketplace URL is accessible

495* Check that `.claude-plugin/marketplace.json` exists at the specified path547* Check that `.claude-plugin/marketplace.json` exists at the specified path

496* Ensure JSON syntax is valid using `claude plugin validate`548* Ensure JSON syntax is valid using `claude plugin validate` or `/plugin validate`

497* For private repositories, confirm you have access permissions549* For private repositories, confirm you have access permissions

498 550

499#### Plugin installation failures551### Marketplace validation errors

552

553Run `claude plugin validate .` or `/plugin validate .` from your marketplace directory to check for issues. Common errors:

554

555| Error | Cause | Solution |

556| :------------------------------------------------ | :------------------------------ | :------------------------------------------------------------ |

557| `File not found: .claude-plugin/marketplace.json` | Missing manifest | Create `.claude-plugin/marketplace.json` with required fields |

558| `Invalid JSON syntax: Unexpected token...` | JSON syntax error | Check for missing commas, extra commas, or unquoted strings |

559| `Duplicate plugin name "x" found in marketplace` | Two plugins share the same name | Give each plugin a unique `name` value |

560| `plugins[0].source: Path traversal not allowed` | Source path contains `..` | Use paths relative to marketplace root without `..` |

561

562**Warnings** (non-blocking):

563

564* `Marketplace has no plugins defined`: add at least one plugin to the `plugins` array

565* `No marketplace description provided`: add `metadata.description` to help users understand your marketplace

566* `Plugin "x" uses npm source which is not yet fully implemented`: use `github` or local path sources instead

567

568### Plugin installation failures

500 569

501**Symptoms**: Marketplace appears but plugin installation fails570**Symptoms**: Marketplace appears but plugin installation fails

502 571

507* For GitHub sources, ensure repositories are public or you have access576* For GitHub sources, ensure repositories are public or you have access

508* Test plugin sources manually by cloning/downloading577* Test plugin sources manually by cloning/downloading

509 578

510### Validation and testing579### Private repository authentication fails

511 580

512Test your marketplace before sharing:581**Symptoms**: Authentication errors when installing plugins from private repositories

513 582

514```bash Validate marketplace JSON syntax theme={null}583**Solutions**:

515claude plugin validate .

516```

517 584

518```shell Add marketplace for testing theme={null}585For manual installation and updates:

519/plugin marketplace add ./path/to/marketplace

520```

521 586

522```shell Install test plugin theme={null}587* Verify you're authenticated with your git provider (for example, run `gh auth status` for GitHub)

523/plugin install test-plugin@marketplace-name588* Check that your credential helper is configured correctly: `git config --global credential.helper`

524```589* Try cloning the repository manually to verify your credentials work

525 590

526For complete plugin testing workflows, see [Test your plugins locally](/en/plugins#test-your-plugins-locally). For technical troubleshooting, see [Plugins reference](/en/plugins-reference).591For background auto-updates:

527 592

528***593* Set the appropriate token in your environment: `echo $GITHUB_TOKEN`

594* Check that the token has the required permissions (read access to the repository)

595* For GitHub, ensure the token has the `repo` scope for private repositories

596* For GitLab, ensure the token has at least `read_repository` scope

597* Verify the token hasn't expired

529 598

530## Next steps599### Plugins with relative paths fail in URL-based marketplaces

531 600

532### For marketplace users601**Symptoms**: Added a marketplace via URL (such as `https://example.com/marketplace.json`), but plugins with relative path sources like `"./plugins/my-plugin"` fail to install with "path not found" errors.

533 602

534* **Discover community marketplaces**: Search GitHub for Claude Code plugin collections603**Cause**: URL-based marketplaces only download the `marketplace.json` file itself. They do not download plugin files from the server. Relative paths in the marketplace entry reference files on the remote server that were not downloaded.

535* **Contribute feedback**: Report issues and suggest improvements to marketplace maintainers

536* **Share useful marketplaces**: Help your team discover valuable plugin collections

537 604

538### For marketplace creators605**Solutions**:

539 606

540* **Build plugin collections**: Create themed marketplace around specific use cases607* **Use external sources**: Change plugin entries to use GitHub, npm, or git URL sources instead of relative paths:

541* **Establish versioning**: Implement clear versioning and update policies608 ```json theme={null}

542* **Community engagement**: Gather feedback and maintain active marketplace communities609 { "name": "my-plugin", "source": { "source": "github", "repo": "owner/repo" } }

543* **Documentation**: Provide clear README files explaining your marketplace contents610 ```

611* **Use a Git-based marketplace**: Host your marketplace in a Git repository and add it with the git URL. Git-based marketplaces clone the entire repository, making relative paths work correctly.

544 612

545### For organizations613### Files not found after installation

546 614

547* **Private marketplaces**: Set up internal marketplaces for proprietary tools615**Symptoms**: Plugin installs but references to files fail, especially files outside the plugin directory

548* **Governance policies**: Establish guidelines for plugin approval and security review

549* **Training resources**: Help teams discover and adopt useful plugins effectively

550 616

551## See also617**Cause**: Plugins are copied to a cache directory rather than used in-place. Paths that reference files outside the plugin's directory (such as `../shared-utils`) won't work because those files aren't copied.

552 618

553* [Plugins](/en/plugins) - Installing and using plugins619**Solutions**: See [Plugin caching and file resolution](/en/plugins-reference#plugin-caching-and-file-resolution) for workarounds including symlinks and directory restructuring.

554* [Plugins reference](/en/plugins-reference) - Complete technical specifications and schemas

555* [Plugin development](/en/plugins#develop-more-complex-plugins) - Creating your own plugins

556* [Settings](/en/settings#plugin-configuration) - Plugin configuration options

557* [strictKnownMarketplaces reference](/en/settings#strictknownmarketplaces) - Complete configuration reference for enterprise marketplace restrictions

558 620

621For additional debugging tools and common issues, see [Debugging and development tools](/en/plugins-reference#debugging-and-development-tools).

559 622

623## See also

560 624

561> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt625* [Discover and install prebuilt plugins](/en/discover-plugins) - Installing plugins from existing marketplaces

626* [Plugins](/en/plugins) - Creating your own plugins

627* [Plugins reference](/en/plugins-reference) - Complete technical specifications and schemas

628* [Plugin settings](/en/settings#plugin-settings) - Plugin configuration options

629* [strictKnownMarketplaces reference](/en/settings#strictknownmarketplaces) - Managed marketplace restrictions

plugins.md +268 −291

Details

~~1# Plugins~~1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

2 4

~~3> Extend Claude Code with custom commands, agents, hooks, Skills, and MCP servers through the plugin system.~~5# Create plugins

7> Create custom plugins to extend Claude Code with skills, agents, hooks, and MCP servers.

9Plugins let you extend Claude Code with custom functionality that can be shared across projects and teams. This guide covers creating your own plugins with skills, agents, hooks, and MCP servers.

11Looking to install existing plugins? See [Discover and install plugins](/en/discover-plugins). For complete technical specifications, see [Plugins reference](/en/plugins-reference).

13## When to use plugins vs standalone configuration

15Claude Code supports two ways to add custom skills, agents, and hooks:

17| Approach | Skill names | Best for |

18| :---------------------------------------------------------- | :------------------- | :---------------------------------------------------------------------------------------------- |

19| **Standalone** (`.claude/` directory) | `/hello` | Personal workflows, project-specific customizations, quick experiments |

20| **Plugins** (directories with `.claude-plugin/plugin.json`) | `/plugin-name:hello` | Sharing with teammates, distributing to community, versioned releases, reusable across projects |

22**Use standalone configuration when**:

24* You're customizing Claude Code for a single project

25* The configuration is personal and doesn't need to be shared

26* You're experimenting with skills or hooks before packaging them

27* You want short skill names like `/hello` or `/review`

29**Use plugins when**:

31* You want to share functionality with your team or community

32* You need the same skills/agents across multiple projects

33* You want version control and easy updates for your extensions

34* You're distributing through a marketplace

35* You're okay with namespaced skills like `/my-plugin:hello` (namespacing prevents conflicts between plugins)

4 36

5<Tip>37<Tip>

~~6 For complete technical specifications and schemas, see [Plugins reference](/en/plugins-reference). For marketplace management, see [Plugin marketplaces](/en/plugin-marketplaces).~~38 Start with standalone configuration in `.claude/` for quick iteration, then [convert to a plugin](#convert-existing-configurations-to-plugins) when you're ready to share.

7</Tip>39</Tip>

8 40

9Plugins let you extend Claude Code with custom functionality that can be shared across projects and teams. Install plugins from [marketplaces](/en/plugin-marketplaces) to add pre-built commands, agents, hooks, Skills, and MCP servers, or create your own to automate your workflows.

11## Quickstart41## Quickstart

12 42

~~13Let's create a simple greeting plugin to get you familiar with the plugin system. We'll build a working plugin that adds a custom command, test it locally, and understand the core concepts.~~43This quickstart walks you through creating a plugin with a custom skill. You'll create a manifest (the configuration file that defines your plugin), add a skill, and test it locally using the `--plugin-dir` flag.

14 44

15### Prerequisites45### Prerequisites

16 46

~~17* Claude Code installed on your machine~~47* Claude Code [installed and authenticated](/en/quickstart#step-1-install-claude-code)

~~18* Basic familiarity with command-line tools~~48* Claude Code version 1.0.33 or later (run `claude --version` to check)

50<Note>

51 If you don't see the `/plugin` command, update Claude Code to the latest version. See [Troubleshooting](/en/troubleshooting) for upgrade instructions.

52</Note>

19 53

20### Create your first plugin54### Create your first plugin

21 55

22<Steps>56<Steps>

~~23 <Step title="Create the marketplace structure">~~

~~24 ```bash theme={null}~~

~~25 mkdir test-marketplace~~

~~26 cd test-marketplace~~

~~27 ```~~

~~28 </Step>~~

30 <Step title="Create the plugin directory">57 <Step title="Create the plugin directory">

58 Every plugin lives in its own directory containing a manifest and your skills, agents, or hooks. Create one now:

31 ```bash theme={null}60 ```bash theme={null}

32 mkdir my-first-plugin61 mkdir my-first-plugin

~~33 cd my-first-plugin~~

34 ```62 ```

35 </Step>63 </Step>

36 64

37 <Step title="Create the plugin manifest">65 <Step title="Create the plugin manifest">

~~38 ```bash Create .claude-plugin/plugin.json theme={null}~~66 The manifest file at `.claude-plugin/plugin.json` defines your plugin's identity: its name, description, and version. Claude Code uses this metadata to display your plugin in the plugin manager.

~~39 mkdir .claude-plugin~~67

~~40 cat > .claude-plugin/plugin.json << 'EOF'~~68 Create the `.claude-plugin` directory inside your plugin folder:

70 ```bash theme={null}

71 mkdir my-first-plugin/.claude-plugin

72 ```

74 Then create `my-first-plugin/.claude-plugin/plugin.json` with this content:

76 ```json my-first-plugin/.claude-plugin/plugin.json theme={null}

41 {77 {

42 "name": "my-first-plugin",78 "name": "my-first-plugin",

~~43 "description": "A simple greeting plugin to learn the basics",~~79 "description": "A greeting plugin to learn the basics",

44 "version": "1.0.0",80 "version": "1.0.0",

45 "author": {81 "author": {

46 "name": "Your Name"82 "name": "Your Name"

47 }83 }

48 }84 }

~~49 EOF~~

50 ```85 ```

87 | Field | Purpose |

88 | :------------ | :----------------------------------------------------------------------------------------------------- |

89 | `name` | Unique identifier and skill namespace. Skills are prefixed with this (e.g., `/my-first-plugin:hello`). |

90 | `description` | Shown in the plugin manager when browsing or installing plugins. |

91 | `version` | Track releases using [semantic versioning](/en/plugins-reference#version-management). |

92 | `author` | Optional. Helpful for attribution. |

94 For additional fields like `homepage`, `repository`, and `license`, see the [full manifest schema](/en/plugins-reference#plugin-manifest-schema).

51 </Step>95 </Step>

52 96

~~53 <Step title="Add a custom command">~~97 <Step title="Add a skill">

~~54 ```bash Create commands/hello.md theme={null}~~98 Skills live in the `skills/` directory. Each skill is a folder containing a `SKILL.md` file. The folder name becomes the skill name, prefixed with the plugin's namespace (`hello/` in a plugin named `my-first-plugin` creates `/my-first-plugin:hello`).

~~55 mkdir commands~~

~~56 cat > commands/hello.md << 'EOF'~~

~~57 ---~~

~~58 description: Greet the user with a personalized message~~

~~59 ---~~

60 99

~~61 # Hello Command~~100 Create a skill directory in your plugin folder:

62 101

~~63 Greet the user warmly and ask how you can help them today. Make the greeting personal and encouraging.~~102 ```bash theme={null}

~~64 EOF~~103 mkdir -p my-first-plugin/skills/hello

65 ```104 ```

~~66 </Step>~~

67 105

~~68 <Step title="Create the marketplace manifest">~~106 Then create `my-first-plugin/skills/hello/SKILL.md` with this content:

~~69 ```bash Create marketplace.json theme={null}~~107

~~70 cd ..~~108 ```markdown my-first-plugin/skills/hello/SKILL.md theme={null}

~~71 mkdir .claude-plugin~~109 ---

~~72 cat > .claude-plugin/marketplace.json << 'EOF'~~110 description: Greet the user with a friendly message

~~73 {~~111 disable-model-invocation: true

~~74 "name": "test-marketplace",~~112 ---

~~75 "owner": {~~113

~~76 "name": "Test User"~~114 Greet the user warmly and ask how you can help them today.

~~77 },~~

~~78 "plugins": [~~

~~79 {~~

~~80 "name": "my-first-plugin",~~

~~81 "source": "./my-first-plugin",~~

~~82 "description": "My first test plugin"~~

~~83 }~~

~~84 ]~~

~~85 }~~

~~86 EOF~~

87 ```115 ```

88 </Step>116 </Step>

89 117

~~90 <Step title="Install and test your plugin">~~118 <Step title="Test your plugin">

~~91 ```bash Start Claude Code from parent directory theme={null}~~119 Run Claude Code with the `--plugin-dir` flag to load your plugin:

~~92 cd ..~~120

~~93 claude~~121 ```bash theme={null}

122 claude --plugin-dir ./my-first-plugin

94 ```123 ```

95 124

~~96 ```shell Add the test marketplace theme={null}~~125 Once Claude Code starts, try your new command:

~~97 /plugin marketplace add ./test-marketplace~~126

127 ```shell theme={null}

128 /my-first-plugin:hello

98 ```129 ```

99 130

100 ```shell Install your plugin theme={null}131 You'll see Claude respond with a greeting. Run `/help` to see your command listed under the plugin namespace.

101 /plugin install my-first-plugin@test-marketplace132

133 <Note>

134 **Why namespacing?** Plugin skills are always namespaced (like `/greet:hello`) to prevent conflicts when multiple plugins have skills with the same name.

135

136 To change the namespace prefix, update the `name` field in `plugin.json`.

137 </Note>

138 </Step>

139

140 <Step title="Add skill arguments">

141 Make your skill dynamic by accepting user input. The `$ARGUMENTS` placeholder captures any text the user provides after the skill name.

142

143 Update your `hello.md` file:

144

145 ```markdown my-first-plugin/commands/hello.md theme={null}

146 ---

147 description: Greet the user with a personalized message

148 ---

149

150 # Hello Command

151

152 Greet the user named "$ARGUMENTS" warmly and ask how you can help them today. Make the greeting personal and encouraging.

102 ```153 ```

103 154

104 Select "Install now". You'll then need to restart Claude Code in order to use the new plugin.155 Restart Claude Code to pick up the changes, then try the command with your name:

105 156

106 ```shell Try your new command theme={null}157 ```shell theme={null}

107 /hello158 /my-first-plugin:hello Alex

108 ```159 ```

109 160

110 You'll see Claude use your greeting command! Check `/help` to see your new command listed.161 Claude will greet you by name. For more on passing arguments to skills, see [Skills](/en/skills#pass-arguments-to-skills).

111 </Step>162 </Step>

112</Steps>163</Steps>

113 164

114You've successfully created and tested a plugin with these key components:165You've successfully created and tested a plugin with these key components:

115 166

116* **Plugin manifest** (`.claude-plugin/plugin.json`) - Describes your plugin's metadata167* **Plugin manifest** (`.claude-plugin/plugin.json`): describes your plugin's metadata

117* **Commands directory** (`commands/`) - Contains your custom slash commands168* **Commands directory** (`commands/`): contains your custom skills

118* **Test marketplace** - Allows you to test your plugin locally169* **Skill arguments** (`$ARGUMENTS`): captures user input for dynamic behavior

119 170

120### Plugin structure overview171<Tip>

172 The `--plugin-dir` flag is useful for development and testing. When you're ready to share your plugin with others, see [Create and distribute a plugin marketplace](/en/plugin-marketplaces).

173</Tip>

121 174

122Your plugin follows this basic structure:175## Plugin structure overview

123 176

124```177You've created a plugin with a skill, but plugins can include much more: custom agents, hooks, MCP servers, and LSP servers.

125my-first-plugin/

126├── .claude-plugin/

127│ └── plugin.json # Plugin metadata

128├── commands/ # Custom slash commands (optional)

129│ └── hello.md

130├── agents/ # Custom agents (optional)

131│ └── helper.md

132├── skills/ # Agent Skills (optional)

133│ └── my-skill/

134│ └── SKILL.md

135└── hooks/ # Event handlers (optional)

136 └── hooks.json

137```

138 178

139**Additional components you can add:**179<Warning>

180 **Common mistake**: Don't put `commands/`, `agents/`, `skills/`, or `hooks/` inside the `.claude-plugin/` directory. Only `plugin.json` goes inside `.claude-plugin/`. All other directories must be at the plugin root level.

181</Warning>

140 182

141* **Commands**: Create markdown files in `commands/` directory183| Directory | Location | Purpose |

142* **Agents**: Create agent definitions in `agents/` directory184| :---------------- | :---------- | :----------------------------------------------------------------------------- |

143* **Skills**: Create `SKILL.md` files in `skills/` directory185| `.claude-plugin/` | Plugin root | Contains `plugin.json` manifest (optional if components use default locations) |

144* **Hooks**: Create `hooks/hooks.json` for event handling186| `commands/` | Plugin root | Skills as Markdown files |

145* **MCP servers**: Create `.mcp.json` for external tool integration187| `agents/` | Plugin root | Custom agent definitions |

188| `skills/` | Plugin root | Agent Skills with `SKILL.md` files |

189| `hooks/` | Plugin root | Event handlers in `hooks.json` |

190| `.mcp.json` | Plugin root | MCP server configurations |

191| `.lsp.json` | Plugin root | LSP server configurations for code intelligence |

146 192

147<Note>193<Note>

148 **Next steps**: Ready to add more features? Jump to [Develop more complex plugins](#develop-more-complex-plugins) to add agents, hooks, and MCP servers. For complete technical specifications of all plugin components, see [Plugins reference](/en/plugins-reference).194 **Next steps**: Ready to add more features? Jump to [Develop more complex plugins](#develop-more-complex-plugins) to add agents, hooks, MCP servers, and LSP servers. For complete technical specifications of all plugin components, see [Plugins reference](/en/plugins-reference).

149</Note>195</Note>

150 196

151***197## Develop more complex plugins

~~152~~

153## Install and manage plugins

~~154~~

155Learn how to discover, install, and manage plugins to extend your Claude Code capabilities.

156 198

157### Prerequisites199Once you're comfortable with basic plugins, you can create more sophisticated extensions.

158 200

159* Claude Code installed and running201### Add Skills to your plugin

160* Basic familiarity with command-line interfaces

161 202

162### Add marketplaces203Plugins can include [Agent Skills](/en/skills) to extend Claude's capabilities. Skills are model-invoked: Claude automatically uses them based on the task context.

163 204

164Marketplaces are catalogs of available plugins. Add them to discover and install plugins:205Add a `skills/` directory at your plugin root with Skill folders containing `SKILL.md` files:

165 206

166```shell Add a marketplace theme={null}

167/plugin marketplace add your-org/claude-plugins

168```207```

~~169~~ 208my-plugin/

170```shell Browse available plugins theme={null}209├── .claude-plugin/

171/plugin210│ └── plugin.json

211└── skills/

212 └── code-review/

213 └── SKILL.md

172```214```

173 215

174For detailed marketplace management including Git repositories, local development, and team distribution, see [Plugin marketplaces](/en/plugin-marketplaces).216Each `SKILL.md` needs frontmatter with `name` and `description` fields, followed by instructions:

~~175~~

176### Install plugins

177 217

178#### Via interactive menu (recommended for discovery)218```yaml theme={null}

219---

220name: code-review

221description: Reviews code for best practices and potential issues. Use when reviewing code, checking PRs, or analyzing code quality.

222---

179 223

180```shell Open the plugin management interface theme={null}224When reviewing code, check for:

181/plugin2251. Code organization and structure

2262. Error handling

2273. Security concerns

2284. Test coverage

182```229```

183 230

184Select "Browse Plugins" to see available options with descriptions, features, and installation options.231After installing the plugin, restart Claude Code to load the Skills. For complete Skill authoring guidance including progressive disclosure and tool restrictions, see [Agent Skills](/en/skills).

185 232

186#### Via direct commands (for quick installation)233### Add LSP servers to your plugin

187 234

188```shell Install a specific plugin theme={null}235<Tip>

189/plugin install formatter@your-org236 For common languages like TypeScript, Python, and Rust, install the pre-built LSP plugins from the official marketplace. Create custom LSP plugins only when you need support for languages not already covered.

190```237</Tip>

~~191~~

192```shell Enable a disabled plugin theme={null}

193/plugin enable plugin-name@marketplace-name

194```

195 238

196```shell Disable without uninstalling theme={null}239LSP (Language Server Protocol) plugins give Claude real-time code intelligence. If you need to support a language that doesn't have an official LSP plugin, you can create your own by adding an `.lsp.json` file to your plugin:

197/plugin disable plugin-name@marketplace-name

198```

199 240

200```shell Completely remove a plugin theme={null}241```json .lsp.json theme={null}

201/plugin uninstall plugin-name@marketplace-name242{

243 "go": {

244 "command": "gopls",

245 "args": ["serve"],

246 "extensionToLanguage": {

247 ".go": "go"

248 }

249 }

250}

202```251```

203 252

204### Installation scopes253Users installing your plugin must have the language server binary installed on their machine.

205 254

206Plugins can be installed at different scopes to control their availability and sharing:255For complete LSP configuration options, see [LSP servers](/en/plugins-reference#lsp-servers).

207 256

208| Scope | Location | Behavior |257### Organize complex plugins

209| :-------- | :---------------------------- | :-------------------------------------- |

210| `user` | `~/.claude/settings.json` | Available across all projects (default) |

211| `project` | `.claude/settings.json` | Shared with team via version control |

212| `local` | `.claude/settings.local.json` | Project-specific, gitignored |

~~213~~

214**When to use each scope:**

215 258

216* **User scope** (default): For plugins you want available in all your projects259For plugins with many components, organize your directory structure by functionality. For complete directory layouts and organization patterns, see [Plugin directory structure](/en/plugins-reference#plugin-directory-structure).

217* **Project scope**: For plugins your team should share (committed to git)

218* **Local scope**: For personal plugins in a specific project (not shared)

219 260

220```shell Install to user scope (default) theme={null}261### Test your plugins locally

221claude plugin install formatter@your-org

222```

223 262

224```shell Install to project scope (shared with team) theme={null}263Use the `--plugin-dir` flag to test plugins during development. This loads your plugin directly without requiring installation.

225claude plugin install formatter@your-org --scope project

226```

227 264

228```shell Install to local scope (gitignored) theme={null}265```bash theme={null}

229claude plugin install formatter@your-org --scope local266claude --plugin-dir ./my-plugin

230```267```

231 268

232The `--scope` option also works with `uninstall`, `enable`, and `disable` commands:269As you make changes to your plugin, restart Claude Code to pick up the updates. Test your plugin components:

233 270

234```shell Uninstall from project scope theme={null}271* Try your commands with `/command-name`

235claude plugin uninstall formatter@your-org --scope project272* Check that agents appear in `/agents`

236```273* Verify hooks work as expected

237 274

238<Note>275<Tip>

239 When using `/plugin install` interactively, you'll be prompted to select the installation scope.276 You can load multiple plugins at once by specifying the flag multiple times:

240</Note>

~~241~~

242### Verify installation

243 277

244After installing a plugin:278 ```bash theme={null}

279 claude --plugin-dir ./plugin-one --plugin-dir ./plugin-two

280 ```

281</Tip>

245 282

2461. **Check available commands**: Run `/help` to see new commands283### Debug plugin issues

2472. **Test plugin features**: Try the plugin's commands and features

2483. **Review plugin details**: Use `/plugin` → "Manage Plugins" to see what the plugin provides

249 284

250## Set up team plugin workflows285If your plugin isn't working as expected:

251 286

252Configure plugins at the repository level to ensure consistent tooling across your team. When team members trust your repository folder, Claude Code automatically installs specified marketplaces and plugins.2871. **Check the structure**: Ensure your directories are at the plugin root, not inside `.claude-plugin/`

2882. **Test components individually**: Check each command, agent, and hook separately

2893. **Use validation and debugging tools**: See [Debugging and development tools](/en/plugins-reference#debugging-and-development-tools) for CLI commands and troubleshooting techniques

253 290

254**To set up team plugins:**291### Share your plugins

255 292

2561. Add marketplace and plugin configuration to your repository's `.claude/settings.json`293When your plugin is ready to share:

2572. Team members trust the repository folder

2583. Plugins install automatically for all team members

259 294

260For complete instructions including configuration examples, marketplace setup, and rollout best practices, see [Configure team marketplaces](/en/plugin-marketplaces#how-to-configure-team-marketplaces).2951. **Add documentation**: Include a `README.md` with installation and usage instructions

2962. **Version your plugin**: Use [semantic versioning](/en/plugins-reference#version-management) in your `plugin.json`

2973. **Create or use a marketplace**: Distribute through [plugin marketplaces](/en/plugin-marketplaces) for installation

2984. **Test with others**: Have team members test the plugin before wider distribution

261 299

262***300Once your plugin is in a marketplace, others can install it using the instructions in [Discover and install plugins](/en/discover-plugins).

263 301

264## Develop more complex plugins302<Note>

303 For complete technical specifications, debugging techniques, and distribution strategies, see [Plugins reference](/en/plugins-reference).

304</Note>

265 305

266Once you're comfortable with basic plugins, you can create more sophisticated extensions.306## Convert existing configurations to plugins

267 307

268### Add Skills to your plugin308If you already have skills or hooks in your `.claude/` directory, you can convert them into a plugin for easier sharing and distribution.

269 309

270Plugins can include [Agent Skills](/en/skills) to extend Claude's capabilities. Skills are model-invoked—Claude autonomously uses them based on the task context.310### Migration steps

271 311

272To add Skills to your plugin, create a `skills/` directory at your plugin root and add Skill folders with `SKILL.md` files. Plugin Skills are automatically available when the plugin is installed.312<Steps>

313 <Step title="Create the plugin structure">

314 Create a new plugin directory:

273 315

274For complete Skill authoring guidance, see [Agent Skills](/en/skills).316 ```bash theme={null}

317 mkdir -p my-plugin/.claude-plugin

318 ```

275 319

276### Organize complex plugins320 Create the manifest file at `my-plugin/.claude-plugin/plugin.json`:

277 321

278For plugins with many components, organize your directory structure by functionality. For complete directory layouts and organization patterns, see [Plugin directory structure](/en/plugins-reference#plugin-directory-structure).322 ```json my-plugin/.claude-plugin/plugin.json theme={null}

323 {

324 "name": "my-plugin",

325 "description": "Migrated from standalone configuration",

326 "version": "1.0.0"

327 }

328 ```

329 </Step>

279 330

280### Test your plugins locally331 <Step title="Copy your existing files">

332 Copy your existing configurations to the plugin directory:

281 333

282When developing plugins, use a local marketplace to test changes iteratively. This workflow builds on the quickstart pattern and works for plugins of any complexity.334 ```bash theme={null}

335 # Copy commands

336 cp -r .claude/commands my-plugin/

283 337

284<Steps>338 # Copy agents (if any)

285 <Step title="Set up your development structure">339 cp -r .claude/agents my-plugin/

286 Organize your plugin and marketplace for testing:

287 340

288 ```bash Create directory structure theme={null}341 # Copy skills (if any)

289 mkdir dev-marketplace342 cp -r .claude/skills my-plugin/

290 cd dev-marketplace

291 mkdir my-plugin

292 ```343 ```

344 </Step>

293 345

294 This creates:346 <Step title="Migrate hooks">

347 If you have hooks in your settings, create a hooks directory:

295 348

349 ```bash theme={null}

350 mkdir my-plugin/hooks

296 ```351 ```

297 dev-marketplace/

298 ├── .claude-plugin/marketplace.json (you'll create this)

299 └── my-plugin/ (your plugin under development)

300 ├── .claude-plugin/plugin.json

301 ├── commands/

302 ├── agents/

303 └── hooks/

304 ```

305 </Step>

306 352

307 <Step title="Create the marketplace manifest">353 Create `my-plugin/hooks/hooks.json` with your hooks configuration. Copy the `hooks` object from your `.claude/settings.json` or `settings.local.json`, since the format is the same. The command receives hook input as JSON on stdin, so use `jq` to extract the file path:

308 ```bash Create marketplace.json theme={null}354

309 mkdir .claude-plugin355 ```json my-plugin/hooks/hooks.json theme={null}

310 cat > .claude-plugin/marketplace.json << 'EOF'

311 {356 {

312 "name": "dev-marketplace",357 "hooks": {

313 "owner": {358 "PostToolUse": [

314 "name": "Developer"

315 },

316 "plugins": [

317 {359 {

318 "name": "my-plugin",360 "matcher": "Write|Edit",

319 "source": "./my-plugin",361 "hooks": [{ "type": "command", "command": "jq -r '.tool_input.file_path' | xargs npm run lint:fix" }]

320 "description": "Plugin under development"

321 }362 }

322 ]363 ]

323 }364 }

324 EOF365 }

325 ```366 ```

326 </Step>367 </Step>

327 368

328 <Step title="Install and test">369 <Step title="Test your migrated plugin">

329 ```bash Start Claude Code from parent directory theme={null}370 Load your plugin to verify everything works:

330 cd ..

331 claude

332 ```

333 371

334 ```shell Add your development marketplace theme={null}372 ```bash theme={null}

335 /plugin marketplace add ./dev-marketplace373 claude --plugin-dir ./my-plugin

336 ```

~~337~~

338 ```shell Install your plugin theme={null}

339 /plugin install my-plugin@dev-marketplace

340 ```

~~341~~

342 Test your plugin components:

~~343~~

344 * Try your commands with `/command-name`

345 * Check that agents appear in `/agents`

346 * Verify hooks work as expected

347 </Step>

~~348~~

349 <Step title="Iterate on your plugin">

350 After making changes to your plugin code:

~~351~~

352 ```shell Uninstall the current version theme={null}

353 /plugin uninstall my-plugin@dev-marketplace

354 ```

~~355~~

356 ```shell Reinstall to test changes theme={null}

357 /plugin install my-plugin@dev-marketplace

358 ```374 ```

359 375

360 Repeat this cycle as you develop and refine your plugin.376 Test each component: run your commands, check agents appear in `/agents`, and verify hooks trigger correctly.

361 </Step>377 </Step>

362</Steps>378</Steps>

363 379

364<Note>380### What changes when migrating

365 **For multiple plugins**: Organize plugins in subdirectories like `./plugins/plugin-name` and update your marketplace.json accordingly. See [Plugin sources](/en/plugin-marketplaces#plugin-sources) for organization patterns.

366</Note>

367 381

368### Debug plugin issues382| Standalone (`.claude/`) | Plugin |

~~369~~ 383| :---------------------------- | :------------------------------- |

370If your plugin isn't working as expected:384| Only available in one project | Can be shared via marketplaces |

~~371~~ 385| Files in `.claude/commands/` | Files in `plugin-name/commands/` |

3721. **Check the structure**: Ensure your directories are at the plugin root, not inside `.claude-plugin/`386| Hooks in `settings.json` | Hooks in `hooks/hooks.json` |

3732. **Test components individually**: Check each command, agent, and hook separately387| Must manually copy to share | Install with `/plugin install` |

3743. **Use validation and debugging tools**: See [Debugging and development tools](/en/plugins-reference#debugging-and-development-tools) for CLI commands and troubleshooting techniques

~~375~~

376### Share your plugins

~~377~~

378When your plugin is ready to share:

~~379~~

3801. **Add documentation**: Include a README.md with installation and usage instructions

3812. **Version your plugin**: Use semantic versioning in your `plugin.json`

3823. **Create or use a marketplace**: Distribute through plugin marketplaces for installation

3834. **Test with others**: Have team members test the plugin before wider distribution

384 388

385<Note>389<Note>

386 For complete technical specifications, debugging techniques, and distribution strategies, see [Plugins reference](/en/plugins-reference).390 After migrating, you can remove the original files from `.claude/` to avoid duplicates. The plugin version will take precedence when loaded.

387</Note>391</Note>

388 392

389***

~~390~~

391## Next steps393## Next steps

392 394

393Now that you understand Claude Code's plugin system, here are suggested paths for different goals:395Now that you understand Claude Code's plugin system, here are suggested paths for different goals:

394 396

395### For plugin users397### For plugin users

396 398

397* **Discover plugins**: Browse community marketplaces for useful tools399* [Discover and install plugins](/en/discover-plugins): browse marketplaces and install plugins

398* **Team adoption**: Set up repository-level plugins for your projects400* [Configure team marketplaces](/en/discover-plugins#configure-team-marketplaces): set up repository-level plugins for your team

399* **Marketplace management**: Learn to manage multiple plugin sources

400* **Advanced usage**: Explore plugin combinations and workflows

401 401

402### For plugin developers402### For plugin developers

403 403

404* **Create your first marketplace**: [Plugin marketplaces guide](/en/plugin-marketplaces)404* [Create and distribute a marketplace](/en/plugin-marketplaces): package and share your plugins

405* **Advanced components**: Dive deeper into specific plugin components:405* [Plugins reference](/en/plugins-reference): complete technical specifications

406 * [Slash commands](/en/slash-commands) - Command development details406* Dive deeper into specific plugin components:

407 * [Subagents](/en/sub-agents) - Agent configuration and capabilities407 * [Skills](/en/skills): skill development details

408 * [Agent Skills](/en/skills) - Extend Claude's capabilities408 * [Subagents](/en/sub-agents): agent configuration and capabilities

409 * [Hooks](/en/hooks) - Event handling and automation409 * [Hooks](/en/hooks): event handling and automation

410 * [MCP](/en/mcp) - External tool integration410 * [MCP](/en/mcp): external tool integration

411* **Distribution strategies**: Package and share your plugins effectively

412* **Community contribution**: Consider contributing to community plugin collections

~~413~~

414### For team leads and administrators

~~415~~

416* **Repository configuration**: Set up automatic plugin installation for team projects

417* **Plugin governance**: Establish guidelines for plugin approval and security review

418* **Marketplace maintenance**: Create and maintain organization-specific plugin catalogs

419* **Training and documentation**: Help team members adopt plugin workflows effectively

~~420~~

421## See also

~~422~~

423* [Plugin marketplaces](/en/plugin-marketplaces) - Creating and managing plugin catalogs

424* [Slash commands](/en/slash-commands) - Understanding custom commands

425* [Subagents](/en/sub-agents) - Creating and using specialized agents

426* [Agent Skills](/en/skills) - Extend Claude's capabilities

427* [Hooks](/en/hooks) - Automating workflows with event handlers

428* [MCP](/en/mcp) - Connecting to external tools and services

429* [Settings](/en/settings) - Configuration options for plugins

~~430~~

~~431~~

~~432~~

433> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

plugins-reference.md +334 −97

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Plugins reference5# Plugins reference

2 6

3> Complete technical reference for Claude Code plugin system, including schemas, CLI commands, and component specifications.7> Complete technical reference for Claude Code plugin system, including schemas, CLI commands, and component specifications.

4 8

5<Tip>9<Tip>

~~6 For hands-on tutorials and practical usage, see [Plugins](/en/plugins). For plugin management across teams and communities, see [Plugin marketplaces](/en/plugin-marketplaces).~~10 Looking to install plugins? See [Discover and install plugins](/en/discover-plugins). For creating plugins, see [Plugins](/en/plugins). For distributing plugins, see [Plugin marketplaces](/en/plugin-marketplaces).

7</Tip>11</Tip>

8 12

9This reference provides complete technical specifications for the Claude Code plugin system, including component schemas, CLI commands, and development tools.13This reference provides complete technical specifications for the Claude Code plugin system, including component schemas, CLI commands, and development tools.

10 14

11## Plugin components reference15## Plugin components reference

12 16

~~13This section documents the five types of components that plugins can provide.~~17This section documents the types of components that plugins can provide.

14 18

~~15### Commands~~19### Skills

16 20

~~17Plugins add custom slash commands that integrate seamlessly with Claude Code's command system.~~21Plugins add skills to Claude Code, creating `/name` shortcuts that you or Claude can invoke.

18 22

~~19**Location**: `commands/` directory in plugin root~~23**Location**: `skills/` or `commands/` directory in plugin root

20 24

~~21**File format**: Markdown files with frontmatter~~25**File format**: Skills are directories with `SKILL.md`; commands are simple markdown files

22 26

~~23For complete details on plugin command structure, invocation patterns, and features, see [Plugin commands](/en/slash-commands#plugin-commands).~~27**Skill structure**:

29```

30skills/

31├── pdf-processor/

32│ ├── SKILL.md

33│ ├── reference.md (optional)

34│ └── scripts/ (optional)

35└── code-reviewer/

36 └── SKILL.md

37```

39**Integration behavior**:

41* Skills and commands are automatically discovered when the plugin is installed

42* Claude can invoke them automatically based on task context

43* Skills can include supporting files alongside SKILL.md

45For complete details, see [Skills](/en/skills).

24 46

25### Agents47### Agents

26 48

34 56

35```markdown theme={null}57```markdown theme={null}

36---58---

~~37description: What this agent specializes in~~59name: agent-name

~~38capabilities: ["task1", "task2", "task3"]~~60description: What this agent specializes in and when Claude should invoke it

39---61---

40 62

~~41# Agent Name~~63Detailed system prompt for the agent describing its role, expertise, and behavior.

~~43Detailed description of the agent's role, expertise, and when Claude should invoke it.~~

~~45## Capabilities~~

~~46- Specific task the agent excels at~~

~~47- Another specialized capability~~

~~48- When to use this agent vs others~~

~~50## Context and examples~~

~~51Provide examples of when this agent should be used and what kinds of problems it solves.~~

52```64```

53 65

54**Integration points**:66**Integration points**:

58* Agents can be invoked manually by users70* Agents can be invoked manually by users

59* Plugin agents work alongside built-in Claude agents71* Plugin agents work alongside built-in Claude agents

60 72

~~61### Skills~~73For complete details, see [Subagents](/en/sub-agents).

~~63Plugins can provide Agent Skills that extend Claude's capabilities. Skills are model-invoked—Claude autonomously decides when to use them based on the task context.~~

~~65**Location**: `skills/` directory in plugin root~~

~~67**File format**: Directories containing `SKILL.md` files with frontmatter~~

~~69**Skill structure**:~~

~~71```~~

~~72skills/~~

~~73├── pdf-processor/~~

~~74│ ├── SKILL.md~~

~~75│ ├── reference.md (optional)~~

~~76│ └── scripts/ (optional)~~

~~77└── code-reviewer/~~

~~78 └── SKILL.md~~

~~79```~~

~~81**Integration behavior**:~~

~~83* Plugin Skills are automatically discovered when the plugin is installed~~

~~84* Claude autonomously invokes Skills based on matching task context~~

~~85* Skills can include supporting files alongside SKILL.md~~

~~87For SKILL.md format and complete Skill authoring guidance, see:~~

~~89* [Use Skills in Claude Code](/en/skills)~~

~~90* [Agent Skills overview](https://docs.claude.com/en/docs/agents-and-tools/agent-skills/overview#skill-structure)~~

91 74

92### Hooks75### Hooks

93 76

120**Available events**:103**Available events**:

121 104

122* `PreToolUse`: Before Claude uses any tool105* `PreToolUse`: Before Claude uses any tool

106* `PostToolUse`: After Claude successfully uses any tool

107* `PostToolUseFailure`: After Claude tool execution fails

123* `PermissionRequest`: When a permission dialog is shown108* `PermissionRequest`: When a permission dialog is shown

124* `PostToolUse`: After Claude uses any tool

125* `UserPromptSubmit`: When user submits a prompt109* `UserPromptSubmit`: When user submits a prompt

126* `Notification`: When Claude Code sends notifications110* `Notification`: When Claude Code sends notifications

127* `Stop`: When Claude attempts to stop111* `Stop`: When Claude attempts to stop

112* `SubagentStart`: When a subagent is started

128* `SubagentStop`: When a subagent attempts to stop113* `SubagentStop`: When a subagent attempts to stop

129* `SessionStart`: At the beginning of sessions114* `SessionStart`: At the beginning of sessions

130* `SessionEnd`: At the end of sessions115* `SessionEnd`: At the end of sessions

116* `TeammateIdle`: When an agent team teammate is about to go idle

117* `TaskCompleted`: When a task is being marked as completed

131* `PreCompact`: Before conversation history is compacted118* `PreCompact`: Before conversation history is compacted

132 119

133**Hook types**:120**Hook types**:

134 121

135* `command`: Execute shell commands or scripts122* `command`: Execute shell commands or scripts

136* `validation`: Validate file contents or project state123* `prompt`: Evaluate a prompt with an LLM (uses `$ARGUMENTS` placeholder for context)

137* `notification`: Send alerts or status updates124* `agent`: Run an agentic verifier with tools for complex verification tasks

138 125

139### MCP servers126### MCP servers

140 127

172* Server capabilities integrate seamlessly with Claude's existing tools159* Server capabilities integrate seamlessly with Claude's existing tools

173* Plugin servers can be configured independently of user MCP servers160* Plugin servers can be configured independently of user MCP servers

174 161

162### LSP servers

163

164<Tip>

165 Looking to use LSP plugins? Install them from the official marketplace: search for "lsp" in the `/plugin` Discover tab. This section documents how to create LSP plugins for languages not covered by the official marketplace.

166</Tip>

167

168Plugins can provide [Language Server Protocol](https://microsoft.github.io/language-server-protocol/) (LSP) servers to give Claude real-time code intelligence while working on your codebase.

169

170LSP integration provides:

171

172* **Instant diagnostics**: Claude sees errors and warnings immediately after each edit

173* **Code navigation**: go to definition, find references, and hover information

174* **Language awareness**: type information and documentation for code symbols

175

176**Location**: `.lsp.json` in plugin root, or inline in `plugin.json`

177

178**Format**: JSON configuration mapping language server names to their configurations

179

180**`.lsp.json` file format**:

181

182```json theme={null}

183{

184 "go": {

185 "command": "gopls",

186 "args": ["serve"],

187 "extensionToLanguage": {

188 ".go": "go"

189 }

190 }

191}

192```

193

194**Inline in `plugin.json`**:

195

196```json theme={null}

197{

198 "name": "my-plugin",

199 "lspServers": {

200 "go": {

201 "command": "gopls",

202 "args": ["serve"],

203 "extensionToLanguage": {

204 ".go": "go"

205 }

206 }

207 }

208}

209```

210

211**Required fields:**

212

213| Field | Description |

214| :-------------------- | :------------------------------------------- |

215| `command` | The LSP binary to execute (must be in PATH) |

216| `extensionToLanguage` | Maps file extensions to language identifiers |

217

218**Optional fields:**

219

220| Field | Description |

221| :---------------------- | :-------------------------------------------------------- |

222| `args` | Command-line arguments for the LSP server |

223| `transport` | Communication transport: `stdio` (default) or `socket` |

224| `env` | Environment variables to set when starting the server |

225| `initializationOptions` | Options passed to the server during initialization |

226| `settings` | Settings passed via `workspace/didChangeConfiguration` |

227| `workspaceFolder` | Workspace folder path for the server |

228| `startupTimeout` | Max time to wait for server startup (milliseconds) |

229| `shutdownTimeout` | Max time to wait for graceful shutdown (milliseconds) |

230| `restartOnCrash` | Whether to automatically restart the server if it crashes |

231| `maxRestarts` | Maximum number of restart attempts before giving up |

232

233<Warning>

234 **You must install the language server binary separately.** LSP plugins configure how Claude Code connects to a language server, but they don't include the server itself. If you see `Executable not found in $PATH` in the `/plugin` Errors tab, install the required binary for your language.

235</Warning>

236

237**Available LSP plugins:**

238

239| Plugin | Language server | Install command |

240| :--------------- | :------------------------- | :----------------------------------------------------------------------------------------- |

241| `pyright-lsp` | Pyright (Python) | `pip install pyright` or `npm install -g pyright` |

242| `typescript-lsp` | TypeScript Language Server | `npm install -g typescript-language-server typescript` |

243| `rust-lsp` | rust-analyzer | [See rust-analyzer installation](https://rust-analyzer.github.io/manual.html#installation) |

244

245Install the language server first, then install the plugin from the marketplace.

246

247***

248

249## Plugin installation scopes

250

251When you install a plugin, you choose a **scope** that determines where the plugin is available and who else can use it:

252

253| Scope | Settings file | Use case |

254| :-------- | :---------------------------- | :------------------------------------------------------- |

255| `user` | `~/.claude/settings.json` | Personal plugins available across all projects (default) |

256| `project` | `.claude/settings.json` | Team plugins shared via version control |

257| `local` | `.claude/settings.local.json` | Project-specific plugins, gitignored |

258| `managed` | `managed-settings.json` | Managed plugins (read-only, update only) |

259

260Plugins use the same scope system as other Claude Code configurations. For installation instructions and scope flags, see [Install plugins](/en/discover-plugins#install-plugins). For a complete explanation of scopes, see [Configuration scopes](/en/settings#configuration-scopes).

261

175***262***

176 263

177## Plugin manifest schema264## Plugin manifest schema

178 265

179The `plugin.json` file defines your plugin's metadata and configuration. This section documents all supported fields and options.266The `.claude-plugin/plugin.json` file defines your plugin's metadata and configuration. This section documents all supported fields and options.

267

268The manifest is optional. If omitted, Claude Code auto-discovers components in [default locations](#file-locations-reference) and derives the plugin name from the directory name. Use a manifest when you need to provide metadata or custom component paths.

180 269

181### Complete schema270### Complete schema

182 271

196 "keywords": ["keyword1", "keyword2"],285 "keywords": ["keyword1", "keyword2"],

197 "commands": ["./custom/commands/special.md"],286 "commands": ["./custom/commands/special.md"],

198 "agents": "./custom/agents/",287 "agents": "./custom/agents/",

288 "skills": "./custom/skills/",

199 "hooks": "./config/hooks.json",289 "hooks": "./config/hooks.json",

200 "mcpServers": "./mcp-config.json"290 "mcpServers": "./mcp-config.json",

291 "outputStyles": "./styles/",

292 "lspServers": "./.lsp.json"

201}293}

202```294```

203 295

204### Required fields296### Required fields

205 297

298If you include a manifest, `name` is the only required field.

299

207| :----- | :----- | :---------------------------------------- | :------------------- |301| :----- | :----- | :---------------------------------------- | :------------------- |

209 303

304This name is used for namespacing components. For example, in the UI, the

305agent `agent-creator` for the plugin with name `plugin-dev` will appear as

306`plugin-dev:agent-creator`.

307

210### Metadata fields308### Metadata fields

211 309

213| :------------ | :----- | :---------------------------------- | :------------------------------------------------- |311| :------------ | :----- | :-------------------------------------------------------------------------------------------------------------------------- | :------------------------------------------------- |

216| `author` | object | Author information | `{"name": "Dev Team", "email": "dev@company.com"}` |314| `author` | object | Author information | `{"name": "Dev Team", "email": "dev@company.com"}` |

222### Component path fields320### Component path fields

223 321

225| :----------- | :------------- | :----------------------------------- | :------------------------------------- |323| :------------- | :-------------------- | :-------------------------------------------------------------------------------------------------------------------------------------------------------- | :------------------------------------- |

230 331

231### Path behavior rules332### Path behavior rules

232 333

275 376

276***377***

277 378

379## Plugin caching and file resolution

380

381For security and verification purposes, Claude Code copies plugins to a cache directory rather than using them in-place. Understanding this behavior is important when developing plugins that reference external files.

382

383### How plugin caching works

384

385Plugins are specified in one of two ways:

386

387* Through `claude --plugin-dir`, for the duration of a session.

388* Through a marketplace, installed to the local plugin cache.

389

390When you install a plugin, Claude Code locates its marketplace and the plugin's `source` field within that marketplace.

391

392The source can be one of five types:

393

394* Relative path: copied recursively to the plugin cache. For example, if your marketplace entry specifies `"source": "./plugins/my-plugin"`, the entire `./plugins/my-plugin` directory is copied.

395* npm - copied to the plugin cache from npm

396* pip - copied to the plugin cache from pip

397* url - any https\:// URL ending in .git

398* github - any owner/repo shorthand

399

400### Path traversal limitations

401

402Plugins cannot reference files outside their copied directory structure. Paths that traverse outside the plugin root (such as `../shared-utils`) will not work after installation because those external files are not copied to the cache.

403

404### Working with external dependencies

405

406If your plugin needs to access files outside its directory, you have two options:

407

408**Option 1: Use symlinks**

409

410Create symbolic links to external files within your plugin directory. Symlinks are honored during the copy process:

411

412```bash theme={null}

413# Inside your plugin directory

414ln -s /path/to/shared-utils ./shared-utils

415```

416

417The symlinked content will be copied into the plugin cache.

418

419**Option 2: Restructure your marketplace**

420

421Set the plugin path to a parent directory that contains all required files, then provide the rest of the plugin manifest directly in the marketplace entry:

422

423```json theme={null}

424{

425 "name": "my-plugin",

426 "source": "./",

427 "description": "Plugin that needs root-level access",

428 "commands": ["./plugins/my-plugin/commands/"],

429 "agents": ["./plugins/my-plugin/agents/"],

430 "strict": false

431}

432```

433

434This approach copies the entire marketplace root, giving your plugin access to sibling directories.

435

436<Note>

437 Symlinks that point to locations outside the plugin's logical root are followed during copying. This provides flexibility while maintaining the security benefits of the caching system.

438</Note>

439

440***

441

278## Plugin directory structure442## Plugin directory structure

279 443

280### Standard plugin layout444### Standard plugin layout

283 447

284```448```

285enterprise-plugin/449enterprise-plugin/

286├── .claude-plugin/ # Metadata directory450├── .claude-plugin/ # Metadata directory (optional)

287│ └── plugin.json # Required: plugin manifest451│ └── plugin.json # plugin manifest

288├── commands/ # Default command location452├── commands/ # Default command location

289│ ├── status.md453│ ├── status.md

290│ └── logs.md454│ └── logs.md

302│ ├── hooks.json # Main hook config466│ ├── hooks.json # Main hook config

303│ └── security-hooks.json # Additional hooks467│ └── security-hooks.json # Additional hooks

304├── .mcp.json # MCP server definitions468├── .mcp.json # MCP server definitions

469├── .lsp.json # LSP server configurations

305├── scripts/ # Hook and utility scripts470├── scripts/ # Hook and utility scripts

306│ ├── security-scan.sh471│ ├── security-scan.sh

307│ ├── format-code.py472│ ├── format-code.py

317### File locations reference482### File locations reference

318 483

320| :-------------- | :--------------------------- | :------------------------------- |485| :-------------- | :--------------------------- | :---------------------------------------------------------- |

492| **LSP servers** | `.lsp.json` | Language server configurations |

327 493

328***494***

329 495

352 518

519Scope determines which settings file the installed plugin is added to. For example, --scope project writes to `enabledPlugins` in .claude/settings.json, making the plugin available to everyone who clones the project repository.

520

353**Examples:**521**Examples:**

354 522

355```bash theme={null}523```bash theme={null}

437**Options:**605**Options:**

438 606

440| :-------------------- | :-------------------------------------------------------- | :------- |608| :-------------------- | :-------------------------------------------------------- | :------ |

443 611

444### Installation scopes

~~445~~

446| Scope | Settings file | Use case |

447| :-------- | :---------------------------- | :-------------------------------------------------- |

448| `user` | `~/.claude/settings.json` | Personal plugins available across all projects |

449| `project` | `.claude/settings.json` | Team plugins shared via version control |

450| `local` | `.claude/settings.local.json` | Project-specific plugins, gitignored |

451| `managed` | `managed-settings.json` | Enterprise-managed plugins (read-only, update only) |

~~452~~

453***612***

454 613

455## Debugging and development tools614## Debugging and development tools

456 615

457### Debugging commands616### Debugging commands

458 617

459Use `claude --debug` to see plugin loading details:618Use `claude --debug` (or `/debug` within the TUI) to see plugin loading details:

~~460~~

461```bash theme={null}

462claude --debug

463```

464 619

465This shows:620This shows:

466 621

472### Common issues627### Common issues

473 628

475| :--------------------- | :------------------------------ | :--------------------------------------------------- |630| :---------------------------------- | :------------------------------ | :-------------------------------------------------------------------------------- |

479| MCP server fails | Missing `${CLAUDE_PLUGIN_ROOT}` | Use variable for all plugin paths |634| MCP server fails | Missing `${CLAUDE_PLUGIN_ROOT}` | Use variable for all plugin paths |

636| LSP `Executable not found in $PATH` | Language server not installed | Install the binary (e.g., `npm install -g typescript-language-server typescript`) |

637

638### Example error messages

639

640**Manifest validation errors**:

641

642* `Invalid JSON syntax: Unexpected token } in JSON at position 142`: check for missing commas, extra commas, or unquoted strings

643* `Plugin has an invalid manifest file at .claude-plugin/plugin.json. Validation errors: name: Required`: a required field is missing

644* `Plugin has a corrupt manifest file at .claude-plugin/plugin.json. JSON parse error: ...`: JSON syntax error

645

646**Plugin loading errors**:

647

648* `Warning: No commands found in plugin my-plugin custom directory: ./cmds. Expected .md files or SKILL.md in subdirectories.`: command path exists but contains no valid command files

649* `Plugin directory not found at path: ./plugins/my-plugin. Check that the marketplace entry has the correct path.`: the `source` path in marketplace.json points to a non-existent directory

650* `Plugin my-plugin has conflicting manifests: both plugin.json and marketplace entry specify components.`: remove duplicate component definitions or remove `strict: false` in marketplace entry

651

652### Hook troubleshooting

653

654**Hook script not executing**:

655

6561. Check the script is executable: `chmod +x ./scripts/your-script.sh`

6572. Verify the shebang line: First line should be `#!/bin/bash` or `#!/usr/bin/env bash`

6583. Check the path uses `${CLAUDE_PLUGIN_ROOT}`: `"command": "${CLAUDE_PLUGIN_ROOT}/scripts/your-script.sh"`

6594. Test the script manually: `./scripts/your-script.sh`

660

661**Hook not triggering on expected events**:

662

6631. Verify the event name is correct (case-sensitive): `PostToolUse`, not `postToolUse`

6642. Check the matcher pattern matches your tools: `"matcher": "Write|Edit"` for file operations

6653. Confirm the hook type is valid: `command`, `prompt`, or `agent`

666

667### MCP server troubleshooting

668

669**Server not starting**:

670

6711. Check the command exists and is executable

6722. Verify all paths use `${CLAUDE_PLUGIN_ROOT}` variable

6733. Check the MCP server logs: `claude --debug` shows initialization errors

6744. Test the server manually outside of Claude Code

675

676**Server tools not appearing**:

677

6781. Ensure the server is properly configured in `.mcp.json` or `plugin.json`

6792. Verify the server implements the MCP protocol correctly

6803. Check for connection timeouts in debug output

681

682### Directory structure mistakes

683

684**Symptoms**: Plugin loads but components (commands, agents, hooks) are missing.

685

686**Correct structure**: Components must be at the plugin root, not inside `.claude-plugin/`. Only `plugin.json` belongs in `.claude-plugin/`.

687

688```

689my-plugin/

690├── .claude-plugin/

691│ └── plugin.json ← Only manifest here

692├── commands/ ← At root level

693├── agents/ ← At root level

694└── hooks/ ← At root level

695```

696

697If your components are inside `.claude-plugin/`, move them to the plugin root.

698

699**Debug checklist**:

700

7011. Run `claude --debug` and look for "loading plugin" messages

7022. Check that each component directory is listed in the debug output

7033. Verify file permissions allow reading the plugin files

481 704

482***705***

483 706

488Follow semantic versioning for plugin releases:711Follow semantic versioning for plugin releases:

489 712

490```json theme={null}713```json theme={null}

714{

715 "name": "my-plugin",

716 "version": "2.1.0"

717}

718```

491 719

492## See also720**Version format**: `MAJOR.MINOR.PATCH`

493 721

494- [Plugins](/en/plugins) - Tutorials and practical usage722* **MAJOR**: Breaking changes (incompatible API changes)

495- [Plugin marketplaces](/en/plugin-marketplaces) - Creating and managing marketplaces723* **MINOR**: New features (backward-compatible additions)

496- [Slash commands](/en/slash-commands) - Command development details724* **PATCH**: Bug fixes (backward-compatible fixes)

497- [Subagents](/en/sub-agents) - Agent configuration and capabilities

498- [Agent Skills](/en/skills) - Extend Claude's capabilities

499- [Hooks](/en/hooks) - Event handling and automation

500- [MCP](/en/mcp) - External tool integration

501- [Settings](/en/settings) - Configuration options for plugins

502```

503 725

726**Best practices**:

504 727

728* Start at `1.0.0` for your first stable release

729* Update the version in `plugin.json` before distributing changes

730* Document changes in a `CHANGELOG.md` file

731* Use pre-release versions like `2.0.0-beta.1` for testing

732

733***

734

735## See also

505 736

506> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt737* [Plugins](/en/plugins) - Tutorials and practical usage

738* [Plugin marketplaces](/en/plugin-marketplaces) - Creating and managing marketplaces

739* [Skills](/en/skills) - Skill development details

740* [Subagents](/en/sub-agents) - Agent configuration and capabilities

741* [Hooks](/en/hooks) - Event handling and automation

742* [MCP](/en/mcp) - External tool integration

743* [Settings](/en/settings) - Configuration options for plugins

quickstart.md +71 −68

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Quickstart5# Quickstart

2 6

3> Welcome to Claude Code!7> Welcome to Claude Code!

10 14

11* A terminal or command prompt open15* A terminal or command prompt open

12* A code project to work with16* A code project to work with

~~13* A [Claude.ai](https://claude.ai) (recommended) or [Claude Console](https://console.anthropic.com/) account~~17* A [Claude subscription](https://claude.com/pricing) (Pro, Max, Teams, or Enterprise), [Claude Console](https://console.anthropic.com/) account, or access through a [supported cloud provider](/en/third-party-integrations)

19<Note>

20 This guide covers the terminal CLI. Claude Code is also available on the [web](https://claude.ai/code), as a [desktop app](/en/desktop), in [VS Code](/en/vs-code) and [JetBrains IDEs](/en/jetbrains), in [Slack](/en/slack), and in CI/CD with [GitHub Actions](/en/github-actions) and [GitLab](/en/gitlab-ci-cd). See [all interfaces](/en/overview#use-claude-code-everywhere).

21</Note>

14 22

15## Step 1: Install Claude Code23## Step 1: Install Claude Code

16 24

35 ```batch theme={null}43 ```batch theme={null}

36 curl -fsSL https://claude.ai/install.cmd -o install.cmd && install.cmd && del install.cmd44 curl -fsSL https://claude.ai/install.cmd -o install.cmd && install.cmd && del install.cmd

37 ```45 ```

47 <Info>

48 Native installations automatically update in the background to keep you on the latest version.

49 </Info>

38 </Tab>50 </Tab>

39 51

40 <Tab title="Homebrew">52 <Tab title="Homebrew">

41 ```sh theme={null}53 ```sh theme={null}

42 brew install --cask claude-code54 brew install --cask claude-code

43 ```55 ```

~~44 </Tab>~~

45 56

~~46 <Tab title="NPM">~~57 <Info>

~~47 If you have [Node.js 18 or newer installed](https://nodejs.org/en/download/):~~58 Homebrew installations do not auto-update. Run `brew upgrade claude-code` periodically to get the latest features and security fixes.

59 </Info>

60 </Tab>

48 61

~~49 ```sh theme={null}~~62 <Tab title="WinGet">

~~50 npm install -g @anthropic-ai/claude-code~~63 ```powershell theme={null}

64 winget install Anthropic.ClaudeCode

51 ```65 ```

67 <Info>

68 WinGet installations do not auto-update. Run `winget upgrade Anthropic.ClaudeCode` periodically to get the latest features and security fixes.

69 </Info>

52 </Tab>70 </Tab>

53</Tabs>71</Tabs>

54 72

66# Follow the prompts to log in with your account84# Follow the prompts to log in with your account

67```85```

68 86

~~69You can log in using either account type:~~87You can log in using any of these account types:

70 88

~~71* [Claude.ai](https://claude.ai) (subscription plans - recommended)~~89* [Claude Pro, Max, Teams, or Enterprise](https://claude.com/pricing) (recommended)

~~72* [Claude Console](https://console.anthropic.com/) (API access with pre-paid credits)~~90* [Claude Console](https://console.anthropic.com/) (API access with pre-paid credits). On first login, a "Claude Code" workspace is automatically created in the Console for centralized cost tracking.

91* [Amazon Bedrock, Google Vertex AI, or Microsoft Foundry](/en/third-party-integrations) (enterprise cloud providers)

73 92

~~74Once logged in, your credentials are stored and you won't need to log in again.~~93Once logged in, your credentials are stored and you won't need to log in again. To switch accounts later, use the `/login` command.

~~76<Note>~~

77 When you first authenticate Claude Code with your Claude Console account, a workspace called "Claude Code" is automatically created for you. This workspace provides centralized cost tracking and management for all Claude Code usage in your organization.

~~78</Note>~~

~~80<Note>~~

~~81 You can have both account types under the same email address. If you need to log in again or switch accounts, use the `/login` command within Claude Code.~~

~~82</Note>~~

83 94

84## Step 3: Start your first session95## Step 3: Start your first session

85 96

93You'll see the Claude Code welcome screen with your session information, recent conversations, and latest updates. Type `/help` for available commands or `/resume` to continue a previous conversation.104You'll see the Claude Code welcome screen with your session information, recent conversations, and latest updates. Type `/help` for available commands or `/resume` to continue a previous conversation.

94 105

95<Tip>106<Tip>

~~96 After logging in (Step 2), your credentials are stored on your system. Learn more in [Credential Management](/en/iam#credential-management).~~107 After logging in (Step 2), your credentials are stored on your system. Learn more in [Credential Management](/en/authentication#credential-management).

97</Tip>108</Tip>

98 109

99## Step 4: Ask your first question110## Step 4: Ask your first question

101Let's start with understanding your codebase. Try one of these commands:112Let's start with understanding your codebase. Try one of these commands:

102 113

103```114```

104> what does this project do?115what does this project do?

105```116```

106 117

107Claude will analyze your files and provide a summary. You can also ask more specific questions:118Claude will analyze your files and provide a summary. You can also ask more specific questions:

108 119

109```120```

110> what technologies does this project use?121what technologies does this project use?

111```122```

112 123

113```124```

114> where is the main entry point?125where is the main entry point?

115```126```

116 127

117```128```

118> explain the folder structure129explain the folder structure

119```130```

120 131

121You can also ask Claude about its own capabilities:132You can also ask Claude about its own capabilities:

122 133

123```134```

124> what can Claude Code do?135what can Claude Code do?

125```136```

126 137

127```138```

128> how do I use slash commands in Claude Code?139how do I create custom skills in Claude Code?

129```140```

130 141

131```142```

132> can Claude Code work with Docker?143can Claude Code work with Docker?

133```144```

134 145

135<Note>146<Note>

141Now let's make Claude Code do some actual coding. Try a simple task:152Now let's make Claude Code do some actual coding. Try a simple task:

142 153

143```154```

144> add a hello world function to the main file155add a hello world function to the main file

145```156```

146 157

147Claude Code will:158Claude Code will:

160Claude Code makes Git operations conversational:171Claude Code makes Git operations conversational:

161 172

162```173```

163> what files have I changed?174what files have I changed?

164```175```

165 176

166```177```

167> commit my changes with a descriptive message178commit my changes with a descriptive message

168```179```

169 180

170You can also prompt for more complex Git operations:181You can also prompt for more complex Git operations:

171 182

172```183```

173> create a new branch called feature/quickstart184create a new branch called feature/quickstart

174```185```

175 186

176```187```

177> show me the last 5 commits188show me the last 5 commits

178```189```

179 190

180```191```

181> help me resolve merge conflicts192help me resolve merge conflicts

182```193```

183 194

184## Step 7: Fix a bug or add a feature195## Step 7: Fix a bug or add a feature

188Describe what you want in natural language:199Describe what you want in natural language:

189 200

190```201```

191> add input validation to the user registration form202add input validation to the user registration form

192```203```

193 204

194Or fix existing issues:205Or fix existing issues:

195 206

196```207```

197> there's a bug where users can submit empty forms - fix it208there's a bug where users can submit empty forms - fix it

198```209```

199 210

200Claude Code will:211Claude Code will:

211**Refactor code**222**Refactor code**

212 223

213```224```

214> refactor the authentication module to use async/await instead of callbacks225refactor the authentication module to use async/await instead of callbacks

215```226```

216 227

217**Write tests**228**Write tests**

218 229

219```230```

220> write unit tests for the calculator functions231write unit tests for the calculator functions

221```232```

222 233

223**Update documentation**234**Update documentation**

224 235

225```236```

226> update the README with installation instructions237update the README with installation instructions

227```238```

228 239

229**Code review**240**Code review**

230 241

231```242```

232> review my changes and suggest improvements243review my changes and suggest improvements

233```244```

234 245

235<Tip>246<Tip>

241Here are the most important commands for daily use:252Here are the most important commands for daily use:

242 253

244| ------------------- | --------------------------------- | ----------------------------------- |255| ------------------- | ------------------------------------------------------ | ----------------------------------- |

254 265

255See the [CLI reference](/en/cli-reference) for a complete list of commands.266See the [CLI reference](/en/cli-reference) for a complete list of commands.

256 267

257## Pro tips for beginners268## Pro tips for beginners

258 269

270For more, see [best practices](/en/best-practices) and [common workflows](/en/common-workflows).

271

259<AccordionGroup>272<AccordionGroup>

260 <Accordion title="Be specific with your requests">273 <Accordion title="Be specific with your requests">

261 Instead of: "fix the bug"274 Instead of: "fix the bug"

267 Break complex tasks into steps:280 Break complex tasks into steps:

268 281

269 ```282 ```

270 > 1. create a new database table for user profiles283 1. create a new database table for user profiles

271 ```284 2. create an API endpoint to get and update user profiles

~~272~~ 285 3. build a webpage that allows users to see and edit their information

273 ```

274 > 2. create an API endpoint to get and update user profiles

275 ```

~~276~~

277 ```

278 > 3. build a webpage that allows users to see and edit their information

279 ```286 ```

280 </Accordion>287 </Accordion>

281 288

283 Before making changes, let Claude understand your code:290 Before making changes, let Claude understand your code:

284 291

285 ```292 ```

286 > analyze the database schema293 analyze the database schema

287 ```294 ```

288 295

289 ```296 ```

290 > build a dashboard showing products that are most frequently returned by our UK customers297 build a dashboard showing products that are most frequently returned by our UK customers

291 ```298 ```

292 </Accordion>299 </Accordion>

293 300

295 * Press `?` to see all available keyboard shortcuts302 * Press `?` to see all available keyboard shortcuts

296 * Use Tab for command completion303 * Use Tab for command completion

297 * Press ↑ for command history304 * Press ↑ for command history

298 * Type `/` to see all slash commands305 * Type `/` to see all commands and skills

299 </Accordion>306 </Accordion>

300</AccordionGroup>307</AccordionGroup>

301 308

303 310

304Now that you've learned the basics, explore more advanced features:311Now that you've learned the basics, explore more advanced features:

305 312

306<CardGroup cols={3}>313<CardGroup cols={2}>

307 <Card title="Common workflows" icon="graduation-cap" href="/en/common-workflows">314 <Card title="How Claude Code works" icon="microchip" href="/en/how-claude-code-works">

308 Step-by-step guides for common tasks315 Understand the agentic loop, built-in tools, and how Claude Code interacts with your project

309 </Card>316 </Card>

310 317

311 <Card title="CLI reference" icon="terminal" href="/en/cli-reference">318 <Card title="Best practices" icon="star" href="/en/best-practices">

312 Master all commands and options319 Get better results with effective prompting and project setup

313 </Card>320 </Card>

314 321

315 <Card title="Configuration" icon="gear" href="/en/settings">322 <Card title="Common workflows" icon="graduation-cap" href="/en/common-workflows">

316 Customize Claude Code for your workflow323 Step-by-step guides for common tasks

317 </Card>324 </Card>

318 325

319 <Card title="Claude Code on the web" icon="cloud" href="/en/claude-code-on-the-web">326 <Card title="Extend Claude Code" icon="puzzle-piece" href="/en/features-overview">

320 Run tasks asynchronously in the cloud327 Customize with CLAUDE.md, skills, hooks, MCP, and more

321 </Card>328 </Card>

322</CardGroup>329</CardGroup>

323 330

326* **In Claude Code**: Type `/help` or ask "how do I..."333* **In Claude Code**: Type `/help` or ask "how do I..."

327* **Documentation**: You're here! Browse other guides334* **Documentation**: You're here! Browse other guides

328* **Community**: Join our [Discord](https://www.anthropic.com/discord) for tips and support335* **Community**: Join our [Discord](https://www.anthropic.com/discord) for tips and support

~~329~~

~~330~~

~~331~~

332> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

sandboxing.md +50 −12

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Sandboxing5# Sandboxing

2 6

3> Learn how Claude Code's sandboxed bash tool provides filesystem and network isolation for safer, more autonomous agent execution.7> Learn how Claude Code's sandboxed bash tool provides filesystem and network isolation for safer, more autonomous agent execution.

51 55

52The sandboxed bash tool leverages operating system security primitives:56The sandboxed bash tool leverages operating system security primitives:

53 57

~~54* **Linux**: Uses [bubblewrap](https://github.com/containers/bubblewrap) for isolation~~

55* **macOS**: Uses Seatbelt for sandbox enforcement58* **macOS**: Uses Seatbelt for sandbox enforcement

59* **Linux**: Uses [bubblewrap](https://github.com/containers/bubblewrap) for isolation

60* **WSL2**: Uses bubblewrap, same as Linux

62WSL1 is not supported because bubblewrap requires kernel features only available in WSL2.

56 63

57These OS-level restrictions ensure that all child processes spawned by Claude Code's commands inherit the same security boundaries.64These OS-level restrictions ensure that all child processes spawned by Claude Code's commands inherit the same security boundaries.

58 65

59## Getting started66## Getting started

60 67

68### Prerequisites

70On **macOS**, sandboxing works out of the box using the built-in Seatbelt framework.

72On **Linux and WSL2**, install the required packages first:

74<Tabs>

75 <Tab title="Ubuntu/Debian">

76 ```bash theme={null}

77 sudo apt-get install bubblewrap socat

78 ```

79 </Tab>

81 <Tab title="Fedora">

82 ```bash theme={null}

83 sudo dnf install bubblewrap socat

84 ```

85 </Tab>

86</Tabs>

61### Enable sandboxing88### Enable sandboxing

62 89

~~63You can enable sandboxing by running the `/sandbox` slash command:~~90You can enable sandboxing by running the `/sandbox` command:

64 91

65```92```

66> /sandbox93> /sandbox

67```94```

68 95

~~69This opens a menu where you can choose between sandbox modes.~~96This opens a menu where you can choose between sandbox modes. If required dependencies are missing (such as `bubblewrap` or `socat` on Linux), the menu displays installation instructions for your platform.

70 97

71### Sandbox modes98### Sandbox modes

72 99

110 137

111* Cannot modify critical config files such as `~/.bashrc`138* Cannot modify critical config files such as `~/.bashrc`

112* Cannot modify system-level files in `/bin/`139* Cannot modify system-level files in `/bin/`

113* Cannot read files that are denied in your [Claude permission settings](/en/iam#configuring-permissions)140* Cannot read files that are denied in your [Claude permission settings](/en/permissions#manage-permissions)

114 141

115**Network protection:**142**Network protection:**

116 143

157* Filesystem Permission Escalation: Overly broad filesystem write permissions can enable privilege escalation attacks. Allowing writes to directories containing executables in `$PATH`, system configuration directories, or user shell configuration files (`.bashrc`, `.zshrc`) can lead to code execution in different security contexts when other users or system processes access these files.184* Filesystem Permission Escalation: Overly broad filesystem write permissions can enable privilege escalation attacks. Allowing writes to directories containing executables in `$PATH`, system configuration directories, or user shell configuration files (`.bashrc`, `.zshrc`) can lead to code execution in different security contexts when other users or system processes access these files.

158* Linux Sandbox Strength: The Linux implementation provides strong filesystem and network isolation but includes an `enableWeakerNestedSandbox` mode that enables it to work inside of Docker environments without privileged namespaces. This option considerably weakens security and should only be used in cases where additional isolation is otherwise enforced.185* Linux Sandbox Strength: The Linux implementation provides strong filesystem and network isolation but includes an `enableWeakerNestedSandbox` mode that enables it to work inside of Docker environments without privileged namespaces. This option considerably weakens security and should only be used in cases where additional isolation is otherwise enforced.

159 186

187## How sandboxing relates to permissions

188

189Sandboxing and [permissions](/en/permissions) are complementary security layers that work together:

190

191* **Permissions** control which tools Claude Code can use and are evaluated before any tool runs. They apply to all tools: Bash, Read, Edit, WebFetch, MCP, and others.

192* **Sandboxing** provides OS-level enforcement that restricts what Bash commands can access at the filesystem and network level. It applies only to Bash commands and their child processes.

193

194Filesystem and network restrictions are configured through permission rules, not sandbox settings:

195

196* Use `Read` and `Edit` deny rules to block access to specific files or directories

197* Use `WebFetch` allow/deny rules to control domain access

198* Use sandbox `allowedDomains` to control which domains Bash commands can reach

199

200This [repository](https://github.com/anthropics/claude-code/tree/main/examples/settings) includes starter settings configurations for common deployment scenarios, including sandbox-specific examples. Use these as starting points and adjust them to fit your needs.

201

160## Advanced usage202## Advanced usage

161 203

162### Custom proxy configuration204### Custom proxy configuration

183 225

184The sandboxed bash tool works alongside:226The sandboxed bash tool works alongside:

185 227

186* **IAM policies**: Combine with [permission settings](/en/iam) for defense-in-depth228* **Permission rules**: Combine with [permission settings](/en/permissions) for defense-in-depth

187* **Development containers**: Use with [devcontainers](/en/devcontainer) for additional isolation229* **Development containers**: Use with [devcontainers](/en/devcontainer) for additional isolation

188* **Enterprise policies**: Enforce sandbox configurations through [managed settings](/en/settings#settings-precedence)230* **Enterprise policies**: Enforce sandbox configurations through [managed settings](/en/settings#settings-precedence)

189 231

209 251

210* **Performance overhead**: Minimal, but some filesystem operations may be slightly slower252* **Performance overhead**: Minimal, but some filesystem operations may be slightly slower

211* **Compatibility**: Some tools that require specific system access patterns may need configuration adjustments, or may even need to be run outside of the sandbox253* **Compatibility**: Some tools that require specific system access patterns may need configuration adjustments, or may even need to be run outside of the sandbox

212* **Platform support**: Currently supports Linux and macOS; Windows support planned254* **Platform support**: Supports macOS, Linux, and WSL2. WSL1 is not supported. Native Windows support is planned.

213 255

214## See also256## See also

215 257

216* [Security](/en/security) - Comprehensive security features and best practices258* [Security](/en/security) - Comprehensive security features and best practices

217* [IAM](/en/iam) - Permission configuration and access control259* [Permissions](/en/permissions) - Permission configuration and access control

218* [Settings](/en/settings) - Complete configuration reference260* [Settings](/en/settings) - Complete configuration reference

219* [CLI reference](/en/cli-reference) - Command-line options including `-sb`261* [CLI reference](/en/cli-reference) - Command-line options

~~220~~

~~221~~

~~222~~

223> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

sdk/migration-guide.md +0 −329 deleted

File DeletedView Diff

~~1# Migrate to Claude Agent SDK~~

~~3Guide for migrating the Claude Code TypeScript and Python SDKs to the Claude Agent SDK~~

~~6## Overview~~

8The Claude Code SDK has been renamed to the **Claude Agent SDK** and its documentation has been reorganized. This change reflects the SDK's broader capabilities for building AI agents beyond just coding tasks.

~~10## What's Changed~~

~~12| Aspect | Old | New |~~

~~13| :----------------------- | :-------------------------- | :------------------------------- |~~

~~14| **Package Name (TS/JS)** | `@anthropic-ai/claude-code` | `@anthropic-ai/claude-agent-sdk` |~~

~~15| **Python Package** | `claude-code-sdk` | `claude-agent-sdk` |~~

~~16| **Documentation Location** | Claude Code docs | API Guide → Agent SDK section |~~

~~18<Note>~~

19**Documentation Changes:** The Agent SDK documentation has moved from the Claude Code docs to the API Guide under a dedicated [Agent SDK](/docs/en/agent-sdk/overview) section. The Claude Code docs now focus on the CLI tool and automation features.

~~20</Note>~~

~~22## Migration Steps~~

~~24### For TypeScript/JavaScript Projects~~

~~26**1. Uninstall the old package:**~~

~~28```bash~~

~~29npm uninstall @anthropic-ai/claude-code~~

~~30```~~

~~32**2. Install the new package:**~~

~~34```bash~~

~~35npm install @anthropic-ai/claude-agent-sdk~~

~~36```~~

~~38**3. Update your imports:**~~

~~40Change all imports from `@anthropic-ai/claude-code` to `@anthropic-ai/claude-agent-sdk`:~~

~~42```typescript~~

~~43// Before~~

~~44import { query, tool, createSdkMcpServer } from "@anthropic-ai/claude-code";~~

~~46// After~~

~~47import {~~

~~48 query,~~

~~49 tool,~~

~~50 createSdkMcpServer,~~

~~51} from "@anthropic-ai/claude-agent-sdk";~~

~~52```~~

~~54**4. Update package.json dependencies:**~~

~~56If you have the package listed in your `package.json`, update it:~~

~~58```json~~

~~59// Before~~

~~60{~~

~~61 "dependencies": {~~

~~62 "@anthropic-ai/claude-code": "^1.0.0"~~

~~63 }~~

~~64}~~

~~66// After~~

~~67{~~

~~68 "dependencies": {~~

~~69 "@anthropic-ai/claude-agent-sdk": "^0.1.0"~~

~~70 }~~

~~71}~~

~~72```~~

~~74That's it! No other code changes are required.~~

~~76### For Python Projects~~

~~78**1. Uninstall the old package:**~~

~~80```bash~~

~~81pip uninstall claude-code-sdk~~

~~82```~~

~~84**2. Install the new package:**~~

~~86```bash~~

~~87pip install claude-agent-sdk~~

~~88```~~

~~90**3. Update your imports:**~~

~~92Change all imports from `claude_code_sdk` to `claude_agent_sdk`:~~

~~94```python~~

~~95# Before~~

~~96from claude_code_sdk import query, ClaudeCodeOptions~~

~~98# After~~

~~99from claude_agent_sdk import query, ClaudeAgentOptions~~

100```

~~101~~

102**4. Update type names:**

~~103~~

104Change `ClaudeCodeOptions` to `ClaudeAgentOptions`:

~~105~~

106```python

107# Before

108from claude_agent_sdk import query, ClaudeCodeOptions

~~109~~

110options = ClaudeCodeOptions(

111 model="claude-sonnet-4-5"

112)

~~113~~

114# After

115from claude_agent_sdk import query, ClaudeAgentOptions

~~116~~

117options = ClaudeAgentOptions(

118 model="claude-sonnet-4-5"

119)

120```

~~121~~

122**5. Review [breaking changes](#breaking-changes)**

~~123~~

124Make any code changes needed to complete the migration.

~~125~~

126## Breaking changes

~~127~~

128<Warning>

129To improve isolation and explicit configuration, Claude Agent SDK v0.1.0 introduces breaking changes for users migrating from Claude Code SDK. Review this section carefully before migrating.

130</Warning>

~~131~~

132### Python: ClaudeCodeOptions renamed to ClaudeAgentOptions

~~133~~

134**What changed:** The Python SDK type `ClaudeCodeOptions` has been renamed to `ClaudeAgentOptions`.

~~135~~

136**Migration:**

~~137~~

138```python

139# BEFORE (v0.0.x)

140from claude_agent_sdk import query, ClaudeCodeOptions

~~141~~

142options = ClaudeCodeOptions(

143 model="claude-sonnet-4-5",

144 permission_mode="acceptEdits"

145)

~~146~~

147# AFTER (v0.1.0)

148from claude_agent_sdk import query, ClaudeAgentOptions

~~149~~

150options = ClaudeAgentOptions(

151 model="claude-sonnet-4-5",

152 permission_mode="acceptEdits"

153)

154```

~~155~~

156**Why this changed:** The type name now matches the "Claude Agent SDK" branding and provides consistency across the SDK's naming conventions.

~~157~~

158### System prompt no longer default

~~159~~

160**What changed:** The SDK no longer uses Claude Code's system prompt by default.

~~161~~

162**Migration:**

~~163~~

164<CodeGroup>

~~165~~

166```typescript TypeScript

167// BEFORE (v0.0.x) - Used Claude Code's system prompt by default

168const result = query({ prompt: "Hello" });

~~169~~

170// AFTER (v0.1.0) - Uses empty system prompt by default

171// To get the old behavior, explicitly request Claude Code's preset:

172const result = query({

173 prompt: "Hello",

174 options: {

175 systemPrompt: { type: "preset", preset: "claude_code" }

176 }

177});

~~178~~

179// Or use a custom system prompt:

180const result = query({

181 prompt: "Hello",

182 options: {

183 systemPrompt: "You are a helpful coding assistant"

184 }

185});

186```

~~187~~

188```python Python

189# BEFORE (v0.0.x) - Used Claude Code's system prompt by default

190async for message in query(prompt="Hello"):

191 print(message)

~~192~~

193# AFTER (v0.1.0) - Uses empty system prompt by default

194# To get the old behavior, explicitly request Claude Code's preset:

195from claude_agent_sdk import query, ClaudeAgentOptions

~~196~~

197async for message in query(

198 prompt="Hello",

199 options=ClaudeAgentOptions(

200 system_prompt={"type": "preset", "preset": "claude_code"} # Use the preset

201 )

202):

203 print(message)

~~204~~

205# Or use a custom system prompt:

206async for message in query(

207 prompt="Hello",

208 options=ClaudeAgentOptions(

209 system_prompt="You are a helpful coding assistant"

210 )

211):

212 print(message)

213```

~~214~~

215</CodeGroup>

~~216~~

217**Why this changed:** Provides better control and isolation for SDK applications. You can now build agents with custom behavior without inheriting Claude Code's CLI-focused instructions.

~~218~~

219### Settings Sources No Longer Loaded by Default

~~220~~

221**What changed:** The SDK no longer reads from filesystem settings (CLAUDE.md, settings.json, slash commands, etc.) by default.

~~222~~

223**Migration:**

~~224~~

225<CodeGroup>

~~226~~

227```typescript TypeScript

228// BEFORE (v0.0.x) - Loaded all settings automatically

229const result = query({ prompt: "Hello" });

230// Would read from:

231// - ~/.claude/settings.json (user)

232// - .claude/settings.json (project)

233// - .claude/settings.local.json (local)

234// - CLAUDE.md files

235// - Custom slash commands

~~236~~

237// AFTER (v0.1.0) - No settings loaded by default

238// To get the old behavior:

239const result = query({

240 prompt: "Hello",

241 options: {

242 settingSources: ["user", "project", "local"]

243 }

244});

~~245~~

246// Or load only specific sources:

247const result = query({

248 prompt: "Hello",

249 options: {

250 settingSources: ["project"] // Only project settings

251 }

252});

253```

~~254~~

255```python Python

256# BEFORE (v0.0.x) - Loaded all settings automatically

257async for message in query(prompt="Hello"):

258 print(message)

259# Would read from:

260# - ~/.claude/settings.json (user)

261# - .claude/settings.json (project)

262# - .claude/settings.local.json (local)

263# - CLAUDE.md files

264# - Custom slash commands

~~265~~

266# AFTER (v0.1.0) - No settings loaded by default

267# To get the old behavior:

268from claude_agent_sdk import query, ClaudeAgentOptions

~~269~~

270async for message in query(

271 prompt="Hello",

272 options=ClaudeAgentOptions(

273 setting_sources=["user", "project", "local"]

274 )

275):

276 print(message)

~~277~~

278# Or load only specific sources:

279async for message in query(

280 prompt="Hello",

281 options=ClaudeAgentOptions(

282 setting_sources=["project"] # Only project settings

283 )

284):

285 print(message)

286```

~~287~~

288</CodeGroup>

~~289~~

290**Why this changed:** Ensures SDK applications have predictable behavior independent of local filesystem configurations. This is especially important for:

291- **CI/CD environments** - Consistent behavior without local customizations

292- **Deployed applications** - No dependency on filesystem settings

293- **Testing** - Isolated test environments

294- **Multi-tenant systems** - Prevent settings leakage between users

~~295~~

296<Note>

297**Backward compatibility:** If your application relied on filesystem settings (custom slash commands, CLAUDE.md instructions, etc.), add `settingSources: ['user', 'project', 'local']` to your options.

298</Note>

~~299~~

300## Why the Rename?

~~301~~

302The Claude Code SDK was originally designed for coding tasks, but it has evolved into a powerful framework for building all types of AI agents. The new name "Claude Agent SDK" better reflects its capabilities:

~~303~~

304- Building business agents (legal assistants, finance advisors, customer support)

305- Creating specialized coding agents (SRE bots, security reviewers, code review agents)

306- Developing custom agents for any domain with tool use, MCP integration, and more

~~307~~

308## Getting Help

~~309~~

310If you encounter any issues during migration:

~~311~~

312**For TypeScript/JavaScript:**

~~313~~

3141. Check that all imports are updated to use `@anthropic-ai/claude-agent-sdk`

3152. Verify your package.json has the new package name

3163. Run `npm install` to ensure dependencies are updated

~~317~~

318**For Python:**

~~319~~

3201. Check that all imports are updated to use `claude_agent_sdk`

3212. Verify your requirements.txt or pyproject.toml has the new package name

3223. Run `pip install claude-agent-sdk` to ensure the package is installed

~~323~~

324## Next Steps

~~325~~

326- Explore the [Agent SDK Overview](/docs/en/agent-sdk/overview) to learn about available features

327- Check out the [TypeScript SDK Reference](/docs/en/agent-sdk/typescript) for detailed API documentation

328- Review the [Python SDK Reference](/docs/en/agent-sdk/python) for Python-specific documentation

329- Learn about [Custom Tools](/docs/en/agent-sdk/custom-tools) and [MCP Integration](/docs/en/agent-sdk/mcp)

security.md +10 −10

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Security5# Security

2 6

3> Learn about Claude Code's security safeguards and best practices for safe usage.7> Learn about Claude Code's security safeguards and best practices for safe usage.

14 18

15We designed Claude Code to be transparent and secure. For example, we require approval for bash commands before executing them, giving you direct control. This approach enables users and organizations to configure permissions directly.19We designed Claude Code to be transparent and secure. For example, we require approval for bash commands before executing them, giving you direct control. This approach enables users and organizations to configure permissions directly.

16 20

~~17For detailed permission configuration, see [Identity and Access Management](/en/iam).~~21For detailed permission configuration, see [Permissions](/en/permissions).

18 22

19### Built-in protections23### Built-in protections

20 24

38* **Permission system**: Sensitive operations require explicit approval42* **Permission system**: Sensitive operations require explicit approval

39* **Context-aware analysis**: Detects potentially harmful instructions by analyzing the full request43* **Context-aware analysis**: Detects potentially harmful instructions by analyzing the full request

40* **Input sanitization**: Prevents command injection by processing user inputs44* **Input sanitization**: Prevents command injection by processing user inputs

41* **Command blocklist**: Blocks risky commands that fetch arbitrary content from the web like `curl` and `wget` by default. When explicitly allowed, be aware of [permission pattern limitations](/en/iam#tool-specific-permission-rules)45* **Command blocklist**: Blocks risky commands that fetch arbitrary content from the web like `curl` and `wget` by default. When explicitly allowed, be aware of [permission pattern limitations](/en/permissions#tool-specific-permission-rules)

42 46

43### Privacy safeguards47### Privacy safeguards

44 48

59* **Command injection detection**: Suspicious bash commands require manual approval even if previously allowlisted63* **Command injection detection**: Suspicious bash commands require manual approval even if previously allowlisted

60* **Fail-closed matching**: Unmatched commands default to requiring manual approval64* **Fail-closed matching**: Unmatched commands default to requiring manual approval

61* **Natural language descriptions**: Complex bash commands include explanations for user understanding65* **Natural language descriptions**: Complex bash commands include explanations for user understanding

~~62* **Secure credential storage**: API keys and tokens are encrypted. See [Credential Management](/en/iam#credential-management)~~66* **Secure credential storage**: API keys and tokens are encrypted. See [Credential Management](/en/authentication#credential-management)

63 67

64<Warning>68<Warning>

65 **Windows WebDAV security risk**: When running Claude Code on Windows, we recommend against enabling WebDAV or allowing Claude Code to access paths such as `\\*` that may contain WebDAV subdirectories. [WebDAV has been deprecated by Microsoft](https://learn.microsoft.com/en-us/windows/whats-new/deprecated-features#:~:text=The%20Webclient%20$WebDAV$%20service%20is%20deprecated) due to security risks. Enabling WebDAV may allow Claude Code to trigger network requests to remote hosts, bypassing the permission system.69 **Windows WebDAV security risk**: When running Claude Code on Windows, we recommend against enabling WebDAV or allowing Claude Code to access paths such as `\\*` that may contain WebDAV subdirectories. [WebDAV has been deprecated by Microsoft](https://learn.microsoft.com/en-us/windows/whats-new/deprecated-features#:~:text=The%20Webclient%20$WebDAV$%20service%20is%20deprecated) due to security risks. Enabling WebDAV may allow Claude Code to trigger network requests to remote hosts, bypassing the permission system.

87 91

88## IDE security92## IDE security

89 93

~~90See [here](/en/vs-code#security) for more information on the security of running Claude Code in an IDE.~~94See [VS Code security and privacy](/en/vs-code#security-and-privacy) for more information on running Claude Code in an IDE.

91 95

92## Cloud execution security96## Cloud execution security

93 97

113 117

114### Team security118### Team security

115 119

116* Use [enterprise managed settings](/en/iam#enterprise-managed-settings) to enforce organizational standards120* Use [managed settings](/en/permissions#managed-settings) to enforce organizational standards

117* Share approved permission configurations through version control121* Share approved permission configurations through version control

118* Train team members on security best practices122* Train team members on security best practices

119* Monitor Claude Code usage through [OpenTelemetry metrics](/en/monitoring-usage)123* Monitor Claude Code usage through [OpenTelemetry metrics](/en/monitoring-usage)

130## Related resources134## Related resources

131 135

132* [Sandboxing](/en/sandboxing) - Filesystem and network isolation for bash commands136* [Sandboxing](/en/sandboxing) - Filesystem and network isolation for bash commands

133* [Identity and Access Management](/en/iam) - Configure permissions and access controls137* [Permissions](/en/permissions) - Configure permissions and access controls

134* [Monitoring usage](/en/monitoring-usage) - Track and audit Claude Code activity138* [Monitoring usage](/en/monitoring-usage) - Track and audit Claude Code activity

135* [Development containers](/en/devcontainer) - Secure, isolated environments139* [Development containers](/en/devcontainer) - Secure, isolated environments

136* [Anthropic Trust Center](https://trust.anthropic.com) - Security certifications and compliance140* [Anthropic Trust Center](https://trust.anthropic.com) - Security certifications and compliance

~~137~~

~~138~~

~~139~~

140> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

settings.md +378 −158

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Claude Code settings5# Claude Code settings

2 6

3> Configure Claude Code with global and project-level settings, and environment variables.7> Configure Claude Code with global and project-level settings, and environment variables.

4 8

5Claude Code offers a variety of settings to configure its behavior to meet your needs. You can configure Claude Code by running the `/config` command when using the interactive REPL, which opens a tabbed Settings interface where you can view status information and modify configuration options.9Claude Code offers a variety of settings to configure its behavior to meet your needs. You can configure Claude Code by running the `/config` command when using the interactive REPL, which opens a tabbed Settings interface where you can view status information and modify configuration options.

6 10

11## Configuration scopes

13Claude Code uses a **scope system** to determine where configurations apply and who they're shared with. Understanding scopes helps you decide how to configure Claude Code for personal use, team collaboration, or enterprise deployment.

15### Available scopes

18| :---------- | :----------------------------------- | :----------------------------------- | :--------------------- |

22| **Local** | `.claude/*.local.*` files | You, in this repository only | No (gitignored) |

24### When to use each scope

26**Managed scope** is for:

28* Security policies that must be enforced organization-wide

29* Compliance requirements that can't be overridden

30* Standardized configurations deployed by IT/DevOps

32**User scope** is best for:

34* Personal preferences you want everywhere (themes, editor settings)

35* Tools and plugins you use across all projects

36* API keys and authentication (stored securely)

38**Project scope** is best for:

40* Team-shared settings (permissions, hooks, MCP servers)

41* Plugins the whole team should have

42* Standardizing tooling across collaborators

44**Local scope** is best for:

46* Personal overrides for a specific project

47* Testing configurations before sharing with the team

48* Machine-specific settings that won't work for others

50### How scopes interact

52When the same setting is configured in multiple scopes, more specific scopes take precedence:

541. **Managed** (highest) - can't be overridden by anything

552. **Command line arguments** - temporary session overrides

563. **Local** - overrides project and user settings

574. **Project** - overrides user settings

585. **User** (lowest) - applies when nothing else specifies the setting

60For example, if a permission is allowed in user settings but denied in project settings, the project setting takes precedence and the permission is blocked.

62### What uses scopes

64Scopes apply to many Claude Code features:

67| :-------------- | :------------------------ | :--------------------------------- | :----------------------------- |

74***

7## Settings files76## Settings files

8 77

9The `settings.json` file is our official mechanism for configuring Claude78The `settings.json` file is our official mechanism for configuring Claude

14* **Project settings** are saved in your project directory:83* **Project settings** are saved in your project directory:

15 * `.claude/settings.json` for settings that are checked into source control and shared with your team84 * `.claude/settings.json` for settings that are checked into source control and shared with your team

16 * `.claude/settings.local.json` for settings that are not checked in, useful for personal preferences and experimentation. Claude Code will configure git to ignore `.claude/settings.local.json` when it is created.85 * `.claude/settings.local.json` for settings that are not checked in, useful for personal preferences and experimentation. Claude Code will configure git to ignore `.claude/settings.local.json` when it is created.

17* **Managed settings** (Enterprise): Enterprise administrators can configure and distribute Claude Code settings to their organization through the [Claude.ai admin console](https://claude.ai/admin-settings/claude-code). These settings are fetched automatically when users authenticate, take precedence over user and project settings, and cannot be overridden locally. This feature is available to Claude for Enterprise customers. If you don't see this option in your admin console, contact your Anthropic account team to have the feature enabled.86* **Managed settings**: For organizations that need centralized control, Claude Code supports `managed-settings.json` and `managed-mcp.json` files that can be deployed to system directories:

~~19 For organizations that prefer file-based policy distribution, Claude Code also supports `managed-settings.json` and `managed-mcp.json` files that can be deployed to system directories:~~

20 87

21 * macOS: `/Library/Application Support/ClaudeCode/`88 * macOS: `/Library/Application Support/ClaudeCode/`

22 * Linux and WSL: `/etc/claude-code/`89 * Linux and WSL: `/etc/claude-code/`

23 * Windows: `C:\Program Files\ClaudeCode\`90 * Windows: `C:\Program Files\ClaudeCode\`

24 91

~~25 See [Enterprise managed settings](/en/iam#enterprise-managed-settings) and [Enterprise MCP configuration](/en/mcp#enterprise-mcp-configuration) for details.~~92 <Note>

93 These are system-wide paths (not user home directories like `~/Library/...`) that require administrator privileges. They are designed to be deployed by IT administrators.

94 </Note>

96 See [Managed settings](/en/permissions#managed-settings) and [Managed MCP configuration](/en/mcp#managed-mcp-configuration) for details.

26 97

27 <Note>98 <Note>

~~28 Enterprise deployments can also restrict **plugin marketplace additions** using~~99 Managed deployments can also restrict **plugin marketplace additions** using

~~29 `strictKnownMarketplaces`. For more information, see [Enterprise marketplace restrictions](/en/plugin-marketplaces#enterprise-marketplace-restrictions).~~100 `strictKnownMarketplaces`. For more information, see [Managed marketplace restrictions](/en/plugin-marketplaces#managed-marketplace-restrictions).

30 </Note>101 </Note>

31* **Other configuration** is stored in `~/.claude.json`. This file contains your preferences (theme, notification settings, editor mode), OAuth session, [MCP server](/en/mcp) configurations for user and local scopes, per-project state (allowed tools, trust settings), and various caches. Project-scoped MCP servers are stored separately in `.mcp.json`.102* **Other configuration** is stored in `~/.claude.json`. This file contains your preferences (theme, notification settings, editor mode), OAuth session, [MCP server](/en/mcp) configurations for user and local scopes, per-project state (allowed tools, trust settings), and various caches. Project-scoped MCP servers are stored separately in `.mcp.json`.

32 103

104<Note>

105 Claude Code automatically creates timestamped backups of configuration files and retains the five most recent backups to prevent data loss.

106</Note>

107

33```JSON Example settings.json theme={null}108```JSON Example settings.json theme={null}

34{109{

110 "$schema": "https://json.schemastore.org/claude-code-settings.json",

35 "permissions": {111 "permissions": {

36 "allow": [112 "allow": [

37 "Bash(npm run lint)",113 "Bash(npm run lint)",

~~38 "Bash(npm run test:*)",~~114 "Bash(npm run test *)",

39 "Read(~/.zshrc)"115 "Read(~/.zshrc)"

40 ],116 ],

41 "deny": [117 "deny": [

~~42 "Bash(curl:*)",~~118 "Bash(curl *)",

43 "Read(./.env)",119 "Read(./.env)",

44 "Read(./.env.*)",120 "Read(./.env.*)",

45 "Read(./secrets/**)"121 "Read(./secrets/**)"

57}133}

58```134```

59 135

136The `$schema` line in the example above points to the [official JSON schema](https://json.schemastore.org/claude-code-settings.json) for Claude Code settings. Adding it to your `settings.json` enables autocomplete and inline validation in VS Code, Cursor, and any other editor that supports JSON schema validation.

137

60### Available settings138### Available settings

61 139

62`settings.json` supports a number of options:140`settings.json` supports a number of options:

63 141

64| Key | Description | Example |142| Key | Description | Example |

65| :--------------------------- | :------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | :---------------------------------------------------------------------- |143| :-------------------------------- | :------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | :---------------------------------------------------------------------- |

66| `apiKeyHelper` | Custom script, to be executed in `/bin/sh`, to generate an auth value. This value will be sent as `X-Api-Key` and `Authorization: Bearer` headers for model requests | `/bin/generate_temp_api_key.sh` |144| `apiKeyHelper` | Custom script, to be executed in `/bin/sh`, to generate an auth value. This value will be sent as `X-Api-Key` and `Authorization: Bearer` headers for model requests | `/bin/generate_temp_api_key.sh` |

67| `cleanupPeriodDays` | Sessions inactive for longer than this period are deleted at startup. Setting to `0` immediately deletes all sessions. (default: 30 days) | `20` |145| `cleanupPeriodDays` | Sessions inactive for longer than this period are deleted at startup. Setting to `0` immediately deletes all sessions. (default: 30 days) | `20` |

68| `companyAnnouncements` | Announcement to display to users at startup. If multiple announcements are provided, they will be cycled through at random. | `["Welcome to Acme Corp! Review our code guidelines at docs.acme.com"]` |146| `companyAnnouncements` | Announcement to display to users at startup. If multiple announcements are provided, they will be cycled through at random. | `["Welcome to Acme Corp! Review our code guidelines at docs.acme.com"]` |

70| `attribution` | Customize attribution for git commits and pull requests. See [Attribution settings](#attribution-settings) | `{"commit": "🤖 Generated with Claude Code", "pr": ""}` |148| `attribution` | Customize attribution for git commits and pull requests. See [Attribution settings](#attribution-settings) | `{"commit": "🤖 Generated with Claude Code", "pr": ""}` |

71| `includeCoAuthoredBy` | **Deprecated**: Use `attribution` instead. Whether to include the `co-authored-by Claude` byline in git commits and pull requests (default: `true`) | `false` |149| `includeCoAuthoredBy` | **Deprecated**: Use `attribution` instead. Whether to include the `co-authored-by Claude` byline in git commits and pull requests (default: `true`) | `false` |

73| `hooks` | Configure custom commands to run before or after tool executions. See [hooks documentation](/en/hooks) | `{"PreToolUse": {"Bash": "echo 'Running command...'"}}` |151| `hooks` | Configure custom commands to run at lifecycle events. See [hooks documentation](/en/hooks) for format | See [hooks](/en/hooks) |

153| `allowManagedHooksOnly` | (Managed settings only) Prevent loading of user, project, and plugin hooks. Only allows managed hooks and SDK hooks. See [Hook configuration](#hook-configuration) | `true` |

154| `allowManagedPermissionRulesOnly` | (Managed settings only) Prevent user and project settings from defining `allow`, `ask`, or `deny` permission rules. Only rules in managed settings apply. See [Managed-only settings](/en/permissions#managed-only-settings) | `true` |

156| `otelHeadersHelper` | Script to generate dynamic OpenTelemetry headers. Runs at startup and periodically (see [Dynamic headers](/en/monitoring-usage#dynamic-headers)) | `/bin/generate_otel_headers.sh` |

76| `statusLine` | Configure a custom status line to display context. See [`statusLine` documentation](/en/statusline) | `{"type": "command", "command": "~/.claude/statusline.sh"}` |157| `statusLine` | Configure a custom status line to display context. See [`statusLine` documentation](/en/statusline) | `{"type": "command", "command": "~/.claude/statusline.sh"}` |

158| `fileSuggestion` | Configure a custom script for `@` file autocomplete. See [File suggestion settings](#file-suggestion-settings) | `{"type": "command", "command": "~/.claude/file-suggestion.sh"}` |

159| `respectGitignore` | Control whether the `@` file picker respects `.gitignore` patterns. When `true` (default), files matching `.gitignore` patterns are excluded from suggestions | `false` |

79| `forceLoginOrgUUID` | Specify the UUID of an organization to automatically select it during login, bypassing the organization selection step. Requires `forceLoginMethod` to be set | `"xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"` |162| `forceLoginOrgUUID` | Specify the UUID of an organization to automatically select it during login, bypassing the organization selection step. Requires `forceLoginMethod` to be set | `"xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"` |

83| `allowedMcpServers` | When set in managed-settings.json, allowlist of MCP servers users can configure. Undefined = no restrictions, empty array = lockdown. Applies to all scopes. Denylist takes precedence. See [Enterprise MCP configuration](/en/mcp#enterprise-mcp-configuration) | `[{ "serverName": "github" }]` |166| `allowedMcpServers` | When set in managed-settings.json, allowlist of MCP servers users can configure. Undefined = no restrictions, empty array = lockdown. Applies to all scopes. Denylist takes precedence. See [Managed MCP configuration](/en/mcp#managed-mcp-configuration) | `[{ "serverName": "github" }]` |

84| `deniedMcpServers` | When set in managed-settings.json, denylist of MCP servers that are explicitly blocked. Applies to all scopes including enterprise servers. Denylist takes precedence over allowlist. See [Enterprise MCP configuration](/en/mcp#enterprise-mcp-configuration) | `[{ "serverName": "filesystem" }]` |167| `deniedMcpServers` | When set in managed-settings.json, denylist of MCP servers that are explicitly blocked. Applies to all scopes including managed servers. Denylist takes precedence over allowlist. See [Managed MCP configuration](/en/mcp#managed-mcp-configuration) | `[{ "serverName": "filesystem" }]` |

85| `strictKnownMarketplaces` | When set in managed-settings.json, allowlist of plugin marketplaces users can add. Undefined = no restrictions, empty array = lockdown. Applies to marketplace additions only. See [Enterprise marketplace restrictions](/en/plugin-marketplaces#enterprise-marketplace-restrictions) | `[{ "source": "github", "repo": "company/plugins" }]` |168| `strictKnownMarketplaces` | When set in managed-settings.json, allowlist of plugin marketplaces users can add. Undefined = no restrictions, empty array = lockdown. Applies to marketplace additions only. See [Managed marketplace restrictions](/en/plugin-marketplaces#managed-marketplace-restrictions) | `[{ "source": "github", "repo": "acme-corp/plugins" }]` |

86| `awsAuthRefresh` | Custom script that modifies the `.aws` directory (see [advanced credential configuration](/en/amazon-bedrock#advanced-credential-configuration)) | `aws sso login --profile myprofile` |169| `awsAuthRefresh` | Custom script that modifies the `.aws` directory (see [advanced credential configuration](/en/amazon-bedrock#advanced-credential-configuration)) | `aws sso login --profile myprofile` |

87| `awsCredentialExport` | Custom script that outputs JSON with AWS credentials (see [advanced credential configuration](/en/amazon-bedrock#advanced-credential-configuration)) | `/bin/generate_aws_grant.sh` |170| `awsCredentialExport` | Custom script that outputs JSON with AWS credentials (see [advanced credential configuration](/en/amazon-bedrock#advanced-credential-configuration)) | `/bin/generate_aws_grant.sh` |

88| `alwaysThinkingEnabled` | Enable [extended thinking](/en/common-workflows#use-extended-thinking) by default for all sessions. Typically configured via the `/config` command rather than editing directly | `true` |171| `alwaysThinkingEnabled` | Enable [extended thinking](/en/common-workflows#use-extended-thinking-thinking-mode) by default for all sessions. Typically configured via the `/config` command rather than editing directly | `true` |

172| `plansDirectory` | Customize where plan files are stored. Path is relative to project root. Default: `~/.claude/plans` | `"./plans"` |

173| `showTurnDuration` | Show turn duration messages after responses (e.g., "Cooked for 1m 6s"). Set to `false` to hide these messages | `true` |

174| `spinnerVerbs` | Customize the action verbs shown in the spinner and turn duration messages. Set `mode` to `"replace"` to use only your verbs, or `"append"` to add them to the defaults | `{"mode": "append", "verbs": ["Pondering", "Crafting"]}` |

175| `language` | Configure Claude's preferred response language (e.g., `"japanese"`, `"spanish"`, `"french"`). Claude will respond in this language by default | `"japanese"` |

176| `autoUpdatesChannel` | Release channel to follow for updates. Use `"stable"` for a version that is typically about one week old and skips versions with major regressions, or `"latest"` (default) for the most recent release | `"stable"` |

177| `spinnerTipsEnabled` | Show tips in the spinner while Claude is working. Set to `false` to disable tips (default: `true`) | `false` |

178| `terminalProgressBarEnabled` | Enable the terminal progress bar that shows progress in supported terminals like Windows Terminal and iTerm2 (default: `true`) | `false` |

179| `prefersReducedMotion` | Reduce or disable UI animations (spinners, shimmer, flash effects) for accessibility | `true` |

180| `teammateMode` | How [agent team](/en/agent-teams) teammates display: `auto` (picks split panes in tmux or iTerm2, in-process otherwise), `in-process`, or `tmux`. See [set up agent teams](/en/agent-teams#set-up-agent-teams) | `"in-process"` |

89 181

90### Permission settings182### Permission settings

91 183

93| :----------------------------- | :------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | :--------------------------------------------------------------------- |185| :----------------------------- | :----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | :--------------------------------------------------------------------- |

94| `allow` | Array of [permission rules](/en/iam#configuring-permissions) to allow tool use. **Note:** Bash rules use prefix matching, not regex | `[ "Bash(git diff:*)" ]` |186| `allow` | Array of permission rules to allow tool use. See [Permission rule syntax](#permission-rule-syntax) below for pattern matching details | `[ "Bash(git diff *)" ]` |

95| `ask` | Array of [permission rules](/en/iam#configuring-permissions) to ask for confirmation upon tool use. | `[ "Bash(git push:*)" ]` |187| `ask` | Array of permission rules to ask for confirmation upon tool use. See [Permission rule syntax](#permission-rule-syntax) below | `[ "Bash(git push *)" ]` |

96| `deny` | Array of [permission rules](/en/iam#configuring-permissions) to deny tool use. Use this to also exclude sensitive files from Claude Code access. **Note:** Bash patterns are prefix matches and can be bypassed (see [Bash permission limitations](/en/iam#tool-specific-permission-rules)) | `[ "WebFetch", "Bash(curl:*)", "Read(./.env)", "Read(./secrets/**)" ]` |188| `deny` | Array of permission rules to deny tool use. Use this to exclude sensitive files from Claude Code access. See [Permission rule syntax](#permission-rule-syntax) and [Bash permission limitations](/en/permissions#tool-specific-permission-rules) | `[ "WebFetch", "Bash(curl *)", "Read(./.env)", "Read(./secrets/**)" ]` |

99| `disableBypassPermissionsMode` | Set to `"disable"` to prevent `bypassPermissions` mode from being activated. This disables the `--dangerously-skip-permissions` command-line flag. See [managed settings](/en/iam#enterprise-managed-settings) | `"disable"` |191| `disableBypassPermissionsMode` | Set to `"disable"` to prevent `bypassPermissions` mode from being activated. This disables the `--dangerously-skip-permissions` command-line flag. See [managed settings](/en/permissions#managed-settings) | `"disable"` |

192

193### Permission rule syntax

194

195Permission rules follow the format `Tool` or `Tool(specifier)`. Rules are evaluated in order: deny rules first, then ask, then allow. The first matching rule wins.

196

197Quick examples:

198

199| Rule | Effect |

200| :----------------------------- | :--------------------------------------- |

201| `Bash` | Matches all Bash commands |

202| `Bash(npm run *)` | Matches commands starting with `npm run` |

203| `Read(./.env)` | Matches reading the `.env` file |

204| `WebFetch(domain:example.com)` | Matches fetch requests to example.com |

205

206For the complete rule syntax reference, including wildcard behavior, tool-specific patterns for Read, Edit, WebFetch, MCP, and Task rules, and security limitations of Bash patterns, see [Permission rule syntax](/en/permissions#permission-rule-syntax).

100 207

101### Sandbox settings208### Sandbox settings

102 209

105**Filesystem and network restrictions** are configured via Read, Edit, and WebFetch permission rules, not via these sandbox settings.212**Filesystem and network restrictions** are configured via Read, Edit, and WebFetch permission rules, not via these sandbox settings.

106 213

108| :-------------------------- | :-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | :------------------------ |215| :---------------------------- | :-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | :------------------------------ |

112| `allowUnsandboxedCommands` | Allow commands to run outside the sandbox via the `dangerouslyDisableSandbox` parameter. When set to `false`, the `dangerouslyDisableSandbox` escape hatch is completely disabled and all commands must run sandboxed (or be in `excludedCommands`). Useful for enterprise policies that require strict sandboxing. Default: true | `false` |219| `allowUnsandboxedCommands` | Allow commands to run outside the sandbox via the `dangerouslyDisableSandbox` parameter. When set to `false`, the `dangerouslyDisableSandbox` escape hatch is completely disabled and all commands must run sandboxed (or be in `excludedCommands`). Useful for enterprise policies that require strict sandboxing. Default: true | `false` |

221| `network.allowAllUnixSockets` | Allow all Unix socket connections in sandbox. Default: false | `true` |

223| `network.allowedDomains` | Array of domains to allow for outbound network traffic. Supports wildcards (e.g., `*.example.com`). | `["github.com", "*.npmjs.org"]` |

115| `network.httpProxyPort` | HTTP proxy port used if you wish to bring your own proxy. If not specified, Claude will run its own proxy. | `8080` |224| `network.httpProxyPort` | HTTP proxy port used if you wish to bring your own proxy. If not specified, Claude will run its own proxy. | `8080` |

116| `network.socksProxyPort` | SOCKS5 proxy port used if you wish to bring your own proxy. If not specified, Claude will run its own proxy. | `8081` |225| `network.socksProxyPort` | SOCKS5 proxy port used if you wish to bring your own proxy. If not specified, Claude will run its own proxy. | `8081` |

118 227

119**Configuration example:**228**Configuration example:**

120 229

125 "autoAllowBashIfSandboxed": true,234 "autoAllowBashIfSandboxed": true,

126 "excludedCommands": ["docker"],235 "excludedCommands": ["docker"],

127 "network": {236 "network": {

237 "allowedDomains": ["github.com", "*.npmjs.org", "registry.yarnpkg.com"],

128 "allowUnixSockets": [238 "allowUnixSockets": [

129 "/var/run/docker.sock"239 "/var/run/docker.sock"

130 ],240 ],

188 The `attribution` setting takes precedence over the deprecated `includeCoAuthoredBy` setting. To hide all attribution, set `commit` and `pr` to empty strings.298 The `attribution` setting takes precedence over the deprecated `includeCoAuthoredBy` setting. To hide all attribution, set `commit` and `pr` to empty strings.

189</Note>299</Note>

190 300

301### File suggestion settings

302

303Configure a custom command for `@` file path autocomplete. The built-in file suggestion uses fast filesystem traversal, but large monorepos may benefit from project-specific indexing such as a pre-built file index or custom tooling.

304

305```json theme={null}

306{

307 "fileSuggestion": {

308 "type": "command",

309 "command": "~/.claude/file-suggestion.sh"

310 }

311}

312```

313

314The command runs with the same environment variables as [hooks](/en/hooks), including `CLAUDE_PROJECT_DIR`. It receives JSON via stdin with a `query` field:

315

316```json theme={null}

317{"query": "src/comp"}

318```

319

320Output newline-separated file paths to stdout (currently limited to 15):

321

322```

323src/components/Button.tsx

324src/components/Modal.tsx

325src/components/Form.tsx

326```

327

328**Example:**

329

330```bash theme={null}

331#!/bin/bash

332query=$(cat | jq -r '.query')

333your-repo-file-index --query "$query" | head -20

334```

335

336### Hook configuration

337

338**Managed settings only**: Controls which hooks are allowed to run. This setting can only be configured in [managed settings](#settings-files) and provides administrators with strict control over hook execution.

339

340**Behavior when `allowManagedHooksOnly` is `true`:**

341

342* Managed hooks and SDK hooks are loaded

343* User hooks, project hooks, and plugin hooks are blocked

344

345**Configuration:**

346

347```json theme={null}

348{

349 "allowManagedHooksOnly": true

350}

351```

352

191### Settings precedence353### Settings precedence

192 354

193Settings apply in order of precedence. From highest to lowest:355Settings apply in order of precedence. From highest to lowest:

194 356

1951. **Managed settings** (Enterprise)3571. **Managed settings** (`managed-settings.json`)

196 * Remote settings configured via the [Claude.ai admin console](https://claude.ai/admin-settings/claude-code)

197 * Fetched automatically when users authenticate

198 * Cannot be overridden

~~199~~

2002. **File-based managed settings** (`managed-settings.json`)

201 * Policies deployed by IT/DevOps to system directories358 * Policies deployed by IT/DevOps to system directories

202 * Cannot be overridden by user or project settings359 * Cannot be overridden by user or project settings

203 * Ignored when remote managed settings are configured

204 360

2053. **Command line arguments**3612. **Command line arguments**

206 * Temporary overrides for a specific session362 * Temporary overrides for a specific session

207 363

2084. **Local project settings** (`.claude/settings.local.json`)3643. **Local project settings** (`.claude/settings.local.json`)

209 * Personal project-specific settings365 * Personal project-specific settings

210 366

2115. **Shared project settings** (`.claude/settings.json`)3674. **Shared project settings** (`.claude/settings.json`)

212 * Team-shared project settings in source control368 * Team-shared project settings in source control

213 369

2146. **User settings** (`~/.claude/settings.json`)3705. **User settings** (`~/.claude/settings.json`)

215 * Personal global settings371 * Personal global settings

216 372

217This hierarchy ensures that enterprise security policies are always enforced while still allowing teams and individuals to customize their experience.373This hierarchy ensures that organizational policies are always enforced while still allowing teams and individuals to customize their experience.

218 374

219For example, if your user settings allow `Bash(npm run:*)` but a project's shared settings deny it, the project setting takes precedence and the command is blocked.375For example, if your user settings allow `Bash(npm run *)` but a project's shared settings deny it, the project setting takes precedence and the command is blocked.

220 376

221### Key points about the configuration system377### Key points about the configuration system

222 378

223* **Memory files (`CLAUDE.md`)**: Contain instructions and context that Claude loads at startup379* **Memory files (`CLAUDE.md`)**: Contain instructions and context that Claude loads at startup

224* **Settings files (JSON)**: Configure permissions, environment variables, and tool behavior380* **Settings files (JSON)**: Configure permissions, environment variables, and tool behavior

225* **Slash commands**: Custom commands that can be invoked during a session with `/command-name`381* **Skills**: Custom prompts that can be invoked with `/skill-name` or loaded by Claude automatically

226* **MCP servers**: Extend Claude Code with additional tools and integrations382* **MCP servers**: Extend Claude Code with additional tools and integrations

227* **Precedence**: Higher-level configurations (Enterprise) override lower-level ones (User/Project)383* **Precedence**: Higher-level configurations (Managed) override lower-level ones (User/Project)

228* **Inheritance**: Settings are merged, with more specific settings adding to or overriding broader ones384* **Inheritance**: Settings are merged, with more specific settings adding to or overriding broader ones

229 385

230### System prompt386### System prompt

249}405}

250```406```

251 407

252This replaces the deprecated `ignorePatterns` configuration. Files matching these patterns will be completely invisible to Claude Code, preventing any accidental exposure of sensitive data.408This replaces the deprecated `ignorePatterns` configuration. Files matching these patterns are excluded from file discovery and search results, and read operations on these files are denied.

253 409

254## Subagent configuration410## Subagent configuration

255 411

262 418

263## Plugin configuration419## Plugin configuration

264 420

265Claude Code supports a plugin system that lets you extend functionality with custom commands, agents, hooks, and MCP servers. Plugins are distributed through marketplaces and can be configured at both user and repository levels.421Claude Code supports a plugin system that lets you extend functionality with skills, agents, hooks, and MCP servers. Plugins are distributed through marketplaces and can be configured at both user and repository levels.

266 422

267### Plugin settings423### Plugin settings

268 424

271```json theme={null}427```json theme={null}

272{428{

273 "enabledPlugins": {429 "enabledPlugins": {

274 "formatter@company-tools": true,430 "formatter@acme-tools": true,

275 "deployer@company-tools": true,431 "deployer@acme-tools": true,

276 "analyzer@security-plugins": false432 "analyzer@security-plugins": false

277 },433 },

278 "extraKnownMarketplaces": {434 "extraKnownMarketplaces": {

279 "company-tools": {435 "acme-tools": {

280 "source": "github",436 "source": "github",

281 "repo": "company/claude-plugins"437 "repo": "acme-corp/claude-plugins"

282 }438 }

283 }439 }

284}440}

322```json theme={null}478```json theme={null}

323{479{

324 "extraKnownMarketplaces": {480 "extraKnownMarketplaces": {

325 "company-tools": {481 "acme-tools": {

326 "source": {482 "source": {

327 "source": "github",483 "source": "github",

328 "repo": "company-org/claude-plugins"484 "repo": "acme-corp/claude-plugins"

329 }485 }

330 },486 },

331 "security-plugins": {487 "security-plugins": {

332 "source": {488 "source": {

333 "source": "git",489 "source": "git",

334 "url": "https://git.company.com/security/plugins.git"490 "url": "https://git.example.com/security/plugins.git"

335 }491 }

336 }492 }

337 }493 }

343* `github`: GitHub repository (uses `repo`)499* `github`: GitHub repository (uses `repo`)

344* `git`: Any git URL (uses `url`)500* `git`: Any git URL (uses `url`)

345* `directory`: Local filesystem path (uses `path`, for development only)501* `directory`: Local filesystem path (uses `path`, for development only)

502* `hostPattern`: regex pattern to match marketplace hosts (uses `hostPattern`)

346 503

347#### `strictKnownMarketplaces`504#### `strictKnownMarketplaces`

348 505

349**Enterprise-only setting**: Controls which plugin marketplaces users are allowed to add. This setting can only be configured in `managed-settings.json` and provides enterprise administrators with strict control over marketplace sources.506**Managed settings only**: Controls which plugin marketplaces users are allowed to add. This setting can only be configured in [`managed-settings.json`](/en/permissions#managed-settings) and provides administrators with strict control over marketplace sources.

350 507

351**Managed settings file locations**:508**Managed settings file locations**:

352 509

353* **macOS**: `/Library/Application Support/ClaudeCode/managed-settings.json`510* **macOS**: `/Library/Application Support/ClaudeCode/managed-settings.json`

354* **Linux and WSL**: `/etc/claude-code/managed-settings.json`511* **Linux and WSL**: `/etc/claude-code/managed-settings.json`

355* **Windows**: `C:\ProgramData\ClaudeCode\managed-settings.json`512* **Windows**: `C:\Program Files\ClaudeCode\managed-settings.json`

356 513

357**Key characteristics**:514**Key characteristics**:

358 515

359* Only available in enterprise managed settings (`managed-settings.json`)516* Only available in managed settings (`managed-settings.json`)

360* Cannot be overridden by user or project settings (highest precedence)517* Cannot be overridden by user or project settings (highest precedence)

361* Enforced BEFORE network/filesystem operations (blocked sources never execute)518* Enforced BEFORE network/filesystem operations (blocked sources never execute)

362* Uses exact matching for source specifications (including `ref`, `path` for git sources)519* Uses exact matching for source specifications (including `ref`, `path` for git sources), except `hostPattern`, which uses regex matching

363 520

364**Allowlist behavior**:521**Allowlist behavior**:

365 522

369 526

370**All supported source types**:527**All supported source types**:

371 528

372The allowlist supports six marketplace source types. Each source must match exactly for a user's marketplace addition to be allowed.529The allowlist supports seven marketplace source types. Most sources use exact matching, while `hostPattern` uses regex matching against the marketplace host.

373 530

3741. **GitHub repositories**:5311. **GitHub repositories**:

375 532

376```json theme={null}533```json theme={null}

377{ "source": "github", "repo": "company/approved-plugins" }534{ "source": "github", "repo": "acme-corp/approved-plugins" }

378{ "source": "github", "repo": "company/security-tools", "ref": "v2.0" }535{ "source": "github", "repo": "acme-corp/security-tools", "ref": "v2.0" }

379{ "source": "github", "repo": "team/plugins", "ref": "main", "path": "marketplace" }536{ "source": "github", "repo": "acme-corp/plugins", "ref": "main", "path": "marketplace" }

380```537```

381 538

382Fields: `repo` (required), `ref` (optional: branch/tag/SHA), `path` (optional: subdirectory)539Fields: `repo` (required), `ref` (optional: branch/tag/SHA), `path` (optional: subdirectory)

3842. **Git repositories**:5412. **Git repositories**:

385 542

386```json theme={null}543```json theme={null}

387{ "source": "git", "url": "https://gitlab.company.com/tools/plugins.git" }544{ "source": "git", "url": "https://gitlab.example.com/tools/plugins.git" }

388{ "source": "git", "url": "https://bitbucket.org/company/plugins.git", "ref": "production" }545{ "source": "git", "url": "https://bitbucket.org/acme-corp/plugins.git", "ref": "production" }

389{ "source": "git", "url": "ssh://git@internal.company.com/plugins.git", "ref": "v3.1", "path": "approved" }546{ "source": "git", "url": "ssh://git@git.example.com/plugins.git", "ref": "v3.1", "path": "approved" }

390```547```

391 548

392Fields: `url` (required), `ref` (optional: branch/tag/SHA), `path` (optional: subdirectory)549Fields: `url` (required), `ref` (optional: branch/tag/SHA), `path` (optional: subdirectory)

3943. **URL-based marketplaces**:5513. **URL-based marketplaces**:

395 552

396```json theme={null}553```json theme={null}

397{ "source": "url", "url": "https://internal.company.com/plugins/marketplace.json" }554{ "source": "url", "url": "https://plugins.example.com/marketplace.json" }

398{ "source": "url", "url": "https://cdn.company.com/marketplace.json", "headers": { "Authorization": "Bearer ${TOKEN}" } }555{ "source": "url", "url": "https://cdn.example.com/marketplace.json", "headers": { "Authorization": "Bearer ${TOKEN}" } }

399```556```

400 557

401Fields: `url` (required), `headers` (optional: HTTP headers for authenticated access)558Fields: `url` (required), `headers` (optional: HTTP headers for authenticated access)

402 559

560<Note>

561 URL-based marketplaces only download the `marketplace.json` file. They do not download plugin files from the server. Plugins in URL-based marketplaces must use external sources (GitHub, npm, or git URLs) rather than relative paths. For plugins with relative paths, use a Git-based marketplace instead. See [Troubleshooting](/en/plugin-marketplaces#plugins-with-relative-paths-fail-in-url-based-marketplaces) for details.

562</Note>

563

4034. **NPM packages**:5644. **NPM packages**:

404 565

405```json theme={null}566```json theme={null}

406{ "source": "npm", "package": "@company/claude-plugins" }567{ "source": "npm", "package": "@acme-corp/claude-plugins" }

407{ "source": "npm", "package": "@company-internal/approved-marketplace" }568{ "source": "npm", "package": "@acme-corp/approved-marketplace" }

408```569```

409 570

410Fields: `package` (required, supports scoped packages)571Fields: `package` (required, supports scoped packages)

4125. **File paths**:5735. **File paths**:

413 574

414```json theme={null}575```json theme={null}

415{ "source": "file", "path": "/usr/local/share/claude/company-marketplace.json" }576{ "source": "file", "path": "/usr/local/share/claude/acme-marketplace.json" }

416{ "source": "file", "path": "/opt/company/plugins/marketplace.json" }577{ "source": "file", "path": "/opt/acme-corp/plugins/marketplace.json" }

417```578```

418 579

419Fields: `path` (required: absolute path to marketplace.json file)580Fields: `path` (required: absolute path to marketplace.json file)

4216. **Directory paths**:5826. **Directory paths**:

422 583

423```json theme={null}584```json theme={null}

424{ "source": "directory", "path": "/usr/local/share/claude/company-plugins" }585{ "source": "directory", "path": "/usr/local/share/claude/acme-plugins" }

425{ "source": "directory", "path": "/opt/company/approved-marketplaces" }586{ "source": "directory", "path": "/opt/acme-corp/approved-marketplaces" }

426```587```

427 588

428Fields: `path` (required: absolute path to directory containing `.claude-plugin/marketplace.json`)589Fields: `path` (required: absolute path to directory containing `.claude-plugin/marketplace.json`)

429 590

5917. **Host pattern matching**:

592

593```json theme={null}

594{ "source": "hostPattern", "hostPattern": "^github\\.example\\.com$" }

595{ "source": "hostPattern", "hostPattern": "^gitlab\\.internal\\.example\\.com$" }

596```

597

598Fields: `hostPattern` (required: regex pattern to match against the marketplace host)

599

600Use host pattern matching when you want to allow all marketplaces from a specific host without enumerating each repository individually. This is useful for organizations with internal GitHub Enterprise or GitLab servers where developers create their own marketplaces.

601

602Host extraction by source type:

603

604* `github`: always matches against `github.com`

605* `git`: extracts hostname from the URL (supports both HTTPS and SSH formats)

606* `url`: extracts hostname from the URL

607* `npm`, `file`, `directory`: not supported for host pattern matching

608

430**Configuration examples**:609**Configuration examples**:

431 610

432Example - Allow specific marketplaces only:611Example: allow specific marketplaces only:

433 612

434```json theme={null}613```json theme={null}

435{614{

436 "strictKnownMarketplaces": [615 "strictKnownMarketplaces": [

437 {616 {

438 "source": "github",617 "source": "github",

439 "repo": "company/approved-plugins"618 "repo": "acme-corp/approved-plugins"

440 },619 },

441 {620 {

442 "source": "github",621 "source": "github",

443 "repo": "company/security-tools",622 "repo": "acme-corp/security-tools",

444 "ref": "v2.0"623 "ref": "v2.0"

445 },624 },

446 {625 {

447 "source": "url",626 "source": "url",

448 "url": "https://internal.company.com/plugins/marketplace.json"627 "url": "https://plugins.example.com/marketplace.json"

449 },628 },

450 {629 {

451 "source": "npm",630 "source": "npm",

452 "package": "@company/compliance-plugins"631 "package": "@acme-corp/compliance-plugins"

453 }632 }

454 ]633 ]

455}634}

463}642}

464```643```

465 644

645Example: allow all marketplaces from an internal git server:

646

647```json theme={null}

648{

649 "strictKnownMarketplaces": [

650 {

651 "source": "hostPattern",

652 "hostPattern": "^github\\.example\\.com$"

653 }

654 ]

655}

656```

657

466**Exact matching requirements**:658**Exact matching requirements**:

467 659

468Marketplace sources must match **exactly** for a user's addition to be allowed. For git-based sources (`github` and `git`), this includes all optional fields:660Marketplace sources must match **exactly** for a user's addition to be allowed. For git-based sources (`github` and `git`), this includes all optional fields:

475 667

476```json theme={null}668```json theme={null}

477// These are DIFFERENT sources:669// These are DIFFERENT sources:

478{ "source": "github", "repo": "company/plugins" }670{ "source": "github", "repo": "acme-corp/plugins" }

479{ "source": "github", "repo": "company/plugins", "ref": "main" }671{ "source": "github", "repo": "acme-corp/plugins", "ref": "main" }

480 672

481// These are also DIFFERENT:673// These are also DIFFERENT:

482{ "source": "github", "repo": "company/plugins", "path": "marketplace" }674{ "source": "github", "repo": "acme-corp/plugins", "path": "marketplace" }

483{ "source": "github", "repo": "company/plugins" }675{ "source": "github", "repo": "acme-corp/plugins" }

484```676```

485 677

486**Comparison with `extraKnownMarketplaces`**:678**Comparison with `extraKnownMarketplaces`**:

487 679

489| --------------------- | ------------------------------------ | ------------------------------------ |681| --------------------- | ------------------------------------ | ------------------------------------ |

502```json theme={null}694```json theme={null}

503{695{

504 "strictKnownMarketplaces": [696 "strictKnownMarketplaces": [

505 { "source": "github", "repo": "company/plugins" }697 { "source": "github", "repo": "acme-corp/plugins" }

506 ]698 ]

507}699}

508```700```

512```json theme={null}704```json theme={null}

513{705{

514 "extraKnownMarketplaces": {706 "extraKnownMarketplaces": {

515 "company-tools": {707 "acme-tools": {

516 "source": { "source": "github", "repo": "company/plugins" }708 "source": { "source": "github", "repo": "acme-corp/plugins" }

517 }709 }

518 }710 }

519}711}

522**Important notes**:714**Important notes**:

523 715

524* Restrictions are checked BEFORE any network requests or filesystem operations716* Restrictions are checked BEFORE any network requests or filesystem operations

525* When blocked, users see clear error messages indicating the source is blocked by enterprise policy717* When blocked, users see clear error messages indicating the source is blocked by managed policy

526* The restriction applies only to adding NEW marketplaces; previously installed marketplaces remain accessible718* The restriction applies only to adding NEW marketplaces; previously installed marketplaces remain accessible

527* Enterprise managed settings have the highest precedence and cannot be overridden719* Managed settings have the highest precedence and cannot be overridden

528 720

529See [Enterprise marketplace restrictions](/en/plugin-marketplaces#enterprise-marketplace-restrictions) for user-facing documentation.721See [Managed marketplace restrictions](/en/plugin-marketplaces#managed-marketplace-restrictions) for user-facing documentation.

530 722

531### Managing plugins723### Managing plugins

532 724

548 All environment variables can also be configured in [`settings.json`](#available-settings). This is useful as a way to automatically set environment variables for each session, or to roll out a set of environment variables for your whole team or organization.740 All environment variables can also be configured in [`settings.json`](#available-settings). This is useful as a way to automatically set environment variables for each session, or to roll out a set of environment variables for your whole team or organization.

549</Note>741</Note>

550 742

552| :----------------------------------------- | :------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |744| :--------------------------------------------- | :---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --- |

553| `ANTHROPIC_API_KEY` | API key sent as `X-Api-Key` header, typically for the Claude SDK (for interactive usage, run `/login`) |745| `ANTHROPIC_API_KEY` | API key sent as `X-Api-Key` header, typically for the Claude SDK (for interactive usage, run `/login`) | |

554| `ANTHROPIC_AUTH_TOKEN` | Custom value for the `Authorization` header (the value you set here will be prefixed with `Bearer `) |746| `ANTHROPIC_AUTH_TOKEN` | Custom value for the `Authorization` header (the value you set here will be prefixed with `Bearer `) | |

559| `ANTHROPIC_FOUNDRY_API_KEY` | API key for Microsoft Foundry authentication (see [Microsoft Foundry](/en/microsoft-foundry)) |751| `ANTHROPIC_FOUNDRY_API_KEY` | API key for Microsoft Foundry authentication (see [Microsoft Foundry](/en/microsoft-foundry)) | |

560| `ANTHROPIC_MODEL` | Name of the model setting to use (see [Model Configuration](/en/model-config#environment-variables)) |752| `ANTHROPIC_FOUNDRY_BASE_URL` | Full base URL for the Foundry resource (for example, `https://my-resource.services.ai.azure.com/anthropic`). Alternative to `ANTHROPIC_FOUNDRY_RESOURCE` (see [Microsoft Foundry](/en/microsoft-foundry)) | |

561| `ANTHROPIC_SMALL_FAST_MODEL` | \[DEPRECATED] Name of [Haiku-class model for background tasks](/en/costs) |753| `ANTHROPIC_FOUNDRY_RESOURCE` | Foundry resource name (for example, `my-resource`). Required if `ANTHROPIC_FOUNDRY_BASE_URL` is not set (see [Microsoft Foundry](/en/microsoft-foundry)) | |

563| `AWS_BEARER_TOKEN_BEDROCK` | Bedrock API key for authentication (see [Bedrock API keys](https://aws.amazon.com/blogs/machine-learning/accelerate-ai-development-with-amazon-bedrock-api-keys/)) |755| `ANTHROPIC_SMALL_FAST_MODEL` | \[DEPRECATED] Name of [Haiku-class model for background tasks](/en/costs) | |

565| `BASH_MAX_OUTPUT_LENGTH` | Maximum number of characters in bash outputs before they are middle-truncated |757| `AWS_BEARER_TOKEN_BEDROCK` | Bedrock API key for authentication (see [Bedrock API keys](https://aws.amazon.com/blogs/machine-learning/accelerate-ai-development-with-amazon-bedrock-api-keys/)) | |

569| `CLAUDE_CODE_CLIENT_CERT` | Path to client certificate file for mTLS authentication |761| `CLAUDE_AUTOCOMPACT_PCT_OVERRIDE` | Set the percentage of context capacity (1-100) at which auto-compaction triggers. By default, auto-compaction triggers at approximately 95% capacity. Use lower values like `50` to compact earlier. Values above the default threshold have no effect. Applies to both main conversations and subagents. This percentage aligns with the `context_window.used_percentage` field available in [status line](/en/statusline) | |

571| `CLAUDE_CODE_CLIENT_KEY` | Path to client private key file for mTLS authentication |763| `CLAUDE_CODE_ADDITIONAL_DIRECTORIES_CLAUDE_MD` | Set to `1` to load CLAUDE.md files from directories specified with `--add-dir`. By default, additional directories do not load memory files | `1` |

572| `CLAUDE_CODE_DISABLE_EXPERIMENTAL_BETAS` | Set to `1` to disable Anthropic API-specific `anthropic-beta` headers. Use this if experiencing issues like "Unexpected value(s) for the `anthropic-beta` header" when using an LLM gateway with third-party providers |764| `CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS` | Set to `1` to enable [agent teams](/en/agent-teams). Agent teams are experimental and disabled by default | |

573| `CLAUDE_CODE_DISABLE_NONESSENTIAL_TRAFFIC` | Equivalent of setting `DISABLE_AUTOUPDATER`, `DISABLE_BUG_COMMAND`, `DISABLE_ERROR_REPORTING`, and `DISABLE_TELEMETRY` |765| `CLAUDE_CODE_API_KEY_HELPER_TTL_MS` | Interval in milliseconds at which credentials should be refreshed (when using `apiKeyHelper`) | |

577| `CLAUDE_CODE_SHELL_PREFIX` | Command prefix to wrap all bash commands (for example, for logging or auditing). Example: `/path/to/logger.sh` will execute `/path/to/logger.sh <command>` |769| `CLAUDE_CODE_EFFORT_LEVEL` | Set the effort level for supported models. Values: `low`, `medium`, `high` (default). Lower effort is faster and cheaper, higher effort provides deeper reasoning. Currently supported with Opus 4.6 only. See [Adjust effort level](/en/model-config#adjust-effort-level) | |

578| `CLAUDE_CODE_SKIP_BEDROCK_AUTH` | Skip AWS authentication for Bedrock (for example, when using an LLM gateway) |770| `CLAUDE_CODE_DISABLE_EXPERIMENTAL_BETAS` | Set to `1` to disable Anthropic API-specific `anthropic-beta` headers. Use this if experiencing issues like "Unexpected value(s) for the `anthropic-beta` header" when using an LLM gateway with third-party providers | |

579| `CLAUDE_CODE_SKIP_FOUNDRY_AUTH` | Skip Azure authentication for Microsoft Foundry (for example, when using an LLM gateway) |771| `CLAUDE_CODE_DISABLE_AUTO_MEMORY` | Set to `1` to disable [auto memory](/en/memory#auto-memory). Set to `0` to force auto memory on during the gradual rollout. When disabled, Claude does not create or load auto memory files | |

580| `CLAUDE_CODE_SKIP_VERTEX_AUTH` | Skip Google authentication for Vertex (for example, when using an LLM gateway) |772| `CLAUDE_CODE_DISABLE_BACKGROUND_TASKS` | Set to `1` to disable all background task functionality, including the `run_in_background` parameter on Bash and subagent tools, auto-backgrounding, and the Ctrl+B shortcut | |

581| `CLAUDE_CODE_SUBAGENT_MODEL` | See [Model configuration](/en/model-config) |773| `CLAUDE_CODE_DISABLE_FEEDBACK_SURVEY` | Set to `1` to disable the "How is Claude doing?" session quality surveys. Also disabled when using third-party providers or when telemetry is disabled. See [Session quality surveys](/en/data-usage#session-quality-surveys) | |

582| `CLAUDE_CODE_USE_BEDROCK` | Use [Bedrock](/en/amazon-bedrock) |774| `CLAUDE_CODE_EXIT_AFTER_STOP_DELAY` | Time in milliseconds to wait after the query loop becomes idle before automatically exiting. Useful for automated workflows and scripts using SDK mode | |

583| `CLAUDE_CODE_USE_FOUNDRY` | Use [Microsoft Foundry](/en/microsoft-foundry) |775| `CLAUDE_CODE_PROXY_RESOLVES_HOSTS` | Set to `true` to allow the proxy to perform DNS resolution instead of the caller. Opt-in for environments where the proxy should handle hostname resolution | |

584| `CLAUDE_CODE_USE_VERTEX` | Use [Vertex](/en/google-vertex-ai) |776| `CLAUDE_CODE_TASK_LIST_ID` | Share a task list across sessions. Set the same ID in multiple Claude Code instances to coordinate on a shared task list. See [Task list](/en/interactive-mode#task-list) | |

586| `DISABLE_AUTOUPDATER` | Set to `1` to disable automatic updates. |778| `CLAUDE_CODE_TMPDIR` | Override the temp directory used for internal temp files. Claude Code appends `/claude/` to this path. Default: `/tmp` on Unix/macOS, `os.tmpdir()` on Windows | |

589| `DISABLE_ERROR_REPORTING` | Set to `1` to opt out of Sentry error reporting |781| `CLAUDE_CODE_ENABLE_PROMPT_SUGGESTION` | Set to `false` to disable prompt suggestions (the "Prompt suggestions" toggle in `/config`). These are the grayed-out predictions that appear in your prompt input after Claude responds. See [Prompt suggestions](/en/interactive-mode#prompt-suggestions) | |

590| `DISABLE_NON_ESSENTIAL_MODEL_CALLS` | Set to `1` to disable model calls for non-critical paths like flavor text |782| `CLAUDE_CODE_ENABLE_TASKS` | Set to `false` to temporarily revert to the previous TODO list instead of the task tracking system. Default: `true`. See [Task list](/en/interactive-mode#task-list) | |

591| `DISABLE_PROMPT_CACHING` | Set to `1` to disable prompt caching for all models (takes precedence over per-model settings) |783| `CLAUDE_CODE_ENABLE_TELEMETRY` | Set to `1` to enable OpenTelemetry data collection for metrics and logging. Required before configuring OTel exporters. See [Monitoring](/en/monitoring-usage) | |

595| `DISABLE_TELEMETRY` | Set to `1` to opt out of Statsig telemetry (note that Statsig events do not include user data like code, file paths, or bash commands) |787| `CLAUDE_CODE_MAX_OUTPUT_TOKENS` | Set the maximum number of output tokens for most requests. Default: 32,000. Maximum: 64,000. Increasing this value reduces the effective context window available before [auto-compaction](/en/costs#reduce-token-usage) triggers. | |

596| `HTTP_PROXY` | Specify HTTP proxy server for network connections |788| `CLAUDE_CODE_OTEL_HEADERS_HELPER_DEBOUNCE_MS` | Interval for refreshing dynamic OpenTelemetry headers in milliseconds (default: 1740000 / 29 minutes). See [Dynamic headers](/en/monitoring-usage#dynamic-headers) | |

597| `HTTPS_PROXY` | Specify HTTPS proxy server for network connections |789| `CLAUDE_CODE_PLAN_MODE_REQUIRED` | Auto-set to `true` on [agent team](/en/agent-teams) teammates that require plan approval. Read-only: set by Claude Code when spawning teammates. See [require plan approval](/en/agent-teams#require-plan-approval-for-teammates) | |

598| `MAX_MCP_OUTPUT_TOKENS` | Maximum number of tokens allowed in MCP tool responses. Claude Code displays a warning when output exceeds 10,000 tokens (default: 25000) |790| `CLAUDE_CODE_SHELL` | Override automatic shell detection. Useful when your login shell differs from your preferred working shell (for example, `bash` vs `zsh`) | |

599| `MAX_THINKING_TOKENS` | Enable [extended thinking](https://docs.claude.com/en/docs/build-with-claude/extended-thinking) and set the token budget for the thinking process. Extended thinking improves performance on complex reasoning and coding tasks but impacts [prompt caching efficiency](https://docs.claude.com/en/docs/build-with-claude/prompt-caching#caching-with-thinking-blocks). Disabled by default. |791| `CLAUDE_CODE_SHELL_PREFIX` | Command prefix to wrap all bash commands (for example, for logging or auditing). Example: `/path/to/logger.sh` will execute `/path/to/logger.sh <command>` | |

603| `SLASH_COMMAND_TOOL_CHAR_BUDGET` | Maximum number of characters for slash command metadata shown to [SlashCommand tool](/en/slash-commands#slashcommand-tool) (default: 15000) |795| `CLAUDE_CODE_SUBAGENT_MODEL` | See [Model configuration](/en/model-config) | |

802| `DISABLE_COST_WARNINGS` | Set to `1` to disable cost warning messages | |

803| `DISABLE_ERROR_REPORTING` | Set to `1` to opt out of Sentry error reporting | |

804| `DISABLE_INSTALLATION_CHECKS` | Set to `1` to disable installation warnings. Use only when manually managing the installation location, as this can mask issues with standard installations | |

805| `DISABLE_NON_ESSENTIAL_MODEL_CALLS` | Set to `1` to disable model calls for non-critical paths like flavor text | |

806| `DISABLE_PROMPT_CACHING` | Set to `1` to disable prompt caching for all models (takes precedence over per-model settings) | |

807| `DISABLE_PROMPT_CACHING_HAIKU` | Set to `1` to disable prompt caching for Haiku models | |

808| `DISABLE_PROMPT_CACHING_OPUS` | Set to `1` to disable prompt caching for Opus models | |

809| `DISABLE_PROMPT_CACHING_SONNET` | Set to `1` to disable prompt caching for Sonnet models | |

810| `DISABLE_TELEMETRY` | Set to `1` to opt out of Statsig telemetry (note that Statsig events do not include user data like code, file paths, or bash commands) | |

811| `ENABLE_TOOL_SEARCH` | Controls [MCP tool search](/en/mcp#scale-with-mcp-tool-search). Values: `auto` (default, enables at 10% context), `auto:N` (custom threshold, e.g., `auto:5` for 5%), `true` (always on), `false` (disabled) | |

812| `FORCE_AUTOUPDATE_PLUGINS` | Set to `true` to force plugin auto-updates even when the main auto-updater is disabled via `DISABLE_AUTOUPDATER` | |

813| `HTTP_PROXY` | Specify HTTP proxy server for network connections | |

814| `HTTPS_PROXY` | Specify HTTPS proxy server for network connections | |

815| `IS_DEMO` | Set to `true` to enable demo mode: hides email and organization from the UI, skips onboarding, and hides internal commands. Useful for streaming or recording sessions | |

816| `MAX_MCP_OUTPUT_TOKENS` | Maximum number of tokens allowed in MCP tool responses. Claude Code displays a warning when output exceeds 10,000 tokens (default: 25000) | |

817| `MAX_THINKING_TOKENS` | Override the [extended thinking](https://platform.claude.com/docs/en/build-with-claude/extended-thinking) token budget. Thinking is enabled at max budget (31,999 tokens) by default. Use this to limit the budget (for example, `MAX_THINKING_TOKENS=10000`) or disable thinking entirely (`MAX_THINKING_TOKENS=0`). For Opus 4.6, thinking depth is controlled by [effort level](/en/model-config#adjust-effort-level) instead, and this variable is ignored unless set to `0` to disable thinking. | |

818| `MCP_CLIENT_SECRET` | OAuth client secret for MCP servers that require [pre-configured credentials](/en/mcp#use-pre-configured-oauth-credentials). Avoids the interactive prompt when adding a server with `--client-secret` | |

819| `MCP_OAUTH_CALLBACK_PORT` | Fixed port for the OAuth redirect callback, as an alternative to `--callback-port` when adding an MCP server with [pre-configured credentials](/en/mcp#use-pre-configured-oauth-credentials) | |

820| `MCP_TIMEOUT` | Timeout in milliseconds for MCP server startup | |

821| `MCP_TOOL_TIMEOUT` | Timeout in milliseconds for MCP tool execution | |

822| `NO_PROXY` | List of domains and IPs to which requests will be directly issued, bypassing proxy | |

823| `SLASH_COMMAND_TOOL_CHAR_BUDGET` | Override the character budget for skill metadata shown to the [Skill tool](/en/skills#control-who-invokes-a-skill). The budget scales dynamically at 2% of the context window, with a fallback of 16,000 characters. Legacy name kept for backwards compatibility | |

824| `USE_BUILTIN_RIPGREP` | Set to `0` to use system-installed `rg` instead of `rg` included with Claude Code | |

825| `VERTEX_REGION_CLAUDE_3_5_HAIKU` | Override region for Claude 3.5 Haiku when using Vertex AI | |

826| `VERTEX_REGION_CLAUDE_3_7_SONNET` | Override region for Claude 3.7 Sonnet when using Vertex AI | |

827| `VERTEX_REGION_CLAUDE_4_0_OPUS` | Override region for Claude 4.0 Opus when using Vertex AI | |

828| `VERTEX_REGION_CLAUDE_4_0_SONNET` | Override region for Claude 4.0 Sonnet when using Vertex AI | |

829| `VERTEX_REGION_CLAUDE_4_1_OPUS` | Override region for Claude 4.1 Opus when using Vertex AI | |

610 830

611## Tools available to Claude831## Tools available to Claude

612 832

613Claude Code has access to a set of powerful tools that help it understand and modify your codebase:833Claude Code has access to a set of powerful tools that help it understand and modify your codebase:

614 834

616| :------------------ | :------------------------------------------------------------------------------------------------ | :------------------ |836| :------------------ | :-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | :------------------ |

617| **AskUserQuestion** | Asks the user multiple choice questions to gather information or clarify ambiguity | No |837| **AskUserQuestion** | Asks multiple-choice questions to gather requirements or clarify ambiguity | No |

618| **Bash** | Executes shell commands in your environment (see [Bash tool behavior](#bash-tool-behavior) below) | Yes |838| **Bash** | Executes shell commands in your environment (see [Bash tool behavior](#bash-tool-behavior) below) | Yes |

619| **BashOutput** | Retrieves output from a background bash shell | No |839| **TaskOutput** | Retrieves output from a background task (bash shell or subagent) | No |

620| **Edit** | Makes targeted edits to specific files | Yes |840| **Edit** | Makes targeted edits to specific files | Yes |

621| **ExitPlanMode** | Prompts the user to exit plan mode and start coding | Yes |841| **ExitPlanMode** | Prompts the user to exit plan mode and start coding | Yes |

622| **Glob** | Finds files based on pattern matching | No |842| **Glob** | Finds files based on pattern matching | No |

623| **Grep** | Searches for patterns in file contents | No |843| **Grep** | Searches for patterns in file contents | No |

624| **KillShell** | Kills a running background bash shell by its ID | No |844| **KillShell** | Kills a running background bash shell by its ID | No |

845| **MCPSearch** | Searches for and loads MCP tools when [tool search](/en/mcp#scale-with-mcp-tool-search) is enabled | No |

625| **NotebookEdit** | Modifies Jupyter notebook cells | Yes |846| **NotebookEdit** | Modifies Jupyter notebook cells | Yes |

626| **Read** | Reads the contents of files | No |847| **Read** | Reads the contents of files | No |

627| **Skill** | Executes a skill within the main conversation | Yes |848| **Skill** | Executes a [skill](/en/skills#control-who-invokes-a-skill) within the main conversation | Yes |

628| **SlashCommand** | Runs a [custom slash command](/en/slash-commands#slashcommand-tool) | Yes |

629| **Task** | Runs a sub-agent to handle complex, multi-step tasks | No |849| **Task** | Runs a sub-agent to handle complex, multi-step tasks | No |

630| **TodoWrite** | Creates and manages structured task lists | No |850| **TaskCreate** | Creates a new task in the task list | No |

851| **TaskGet** | Retrieves full details for a specific task | No |

852| **TaskList** | Lists all tasks with their current status | No |

853| **TaskUpdate** | Updates task status, dependencies, details, or deletes tasks | No |

631| **WebFetch** | Fetches content from a specified URL | Yes |854| **WebFetch** | Fetches content from a specified URL | Yes |

632| **WebSearch** | Performs web searches with domain filtering | Yes |855| **WebSearch** | Performs web searches with domain filtering | Yes |

633| **Write** | Creates or overwrites files | Yes |856| **Write** | Creates or overwrites files | Yes |

857| **LSP** | Code intelligence via language servers. Reports type errors and warnings automatically after file edits. Also supports navigation operations: jump to definitions, find references, get type info, list symbols, find implementations, trace call hierarchies. Requires a [code intelligence plugin](/en/discover-plugins#code-intelligence) and its language server binary | No |

634 858

635Permission rules can be configured using `/allowed-tools` or in [permission settings](/en/settings#available-settings). Also see [Tool-specific permission rules](/en/iam#tool-specific-permission-rules).859Permission rules can be configured using `/allowed-tools` or in [permission settings](/en/settings#available-settings). Also see [Tool-specific permission rules](/en/permissions#tool-specific-permission-rules).

636 860

637### Bash tool behavior861### Bash tool behavior

638 862

694 918

695The hook writes to `$CLAUDE_ENV_FILE`, which is then sourced before each Bash command. This is ideal for team-shared project configurations.919The hook writes to `$CLAUDE_ENV_FILE`, which is then sourced before each Bash command. This is ideal for team-shared project configurations.

696 920

697See [SessionStart hooks](/en/hooks#persisting-environment-variables) for more details on Option 3.921See [SessionStart hooks](/en/hooks#persist-environment-variables) for more details on Option 3.

698 922

699### Extending tools with hooks923### Extending tools with hooks

700 924

707 931

708## See also932## See also

709 933

710* [Identity and Access Management](/en/iam#configuring-permissions) - Learn about Claude Code's permission system934* [Permissions](/en/permissions): permission system, rule syntax, tool-specific patterns, and managed policies

711* [IAM and access control](/en/iam#enterprise-managed-settings) - Enterprise policy management935* [Authentication](/en/authentication): set up user access to Claude Code

712* [Troubleshooting](/en/troubleshooting#auto-updater-issues) - Solutions for common configuration issues936* [Troubleshooting](/en/troubleshooting): solutions for common configuration issues

~~713~~

~~714~~

~~715~~

716> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

setup.md +159 −98

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Set up Claude Code5# Set up Claude Code

2 6

3> Install, authenticate, and start using Claude Code on your development machine.7> Install, authenticate, and start using Claude Code on your development machine.

4 8

5## System requirements9## System requirements

6 10

~~7* **Operating Systems**: macOS 10.15+, Ubuntu 20.04+/Debian 10+, or Windows 10+ (with WSL 1, WSL 2, or Git for Windows)~~11* **Operating System**:

12 * macOS 13.0+

13 * Windows 10 1809+ or Windows Server 2019+ ([see setup notes](#platform-specific-setup))

14 * Ubuntu 20.04+

15 * Debian 10+

16 * Alpine Linux 3.19+ ([additional dependencies required](#platform-specific-setup))

8* **Hardware**: 4 GB+ RAM17* **Hardware**: 4 GB+ RAM

~~9* **Software**: [Node.js 18+](https://nodejs.org/en/download) (only required for npm installation)~~18* **Network**: Internet connection required (see [network configuration](/en/network-config#network-access-requirements))

~~10* **Network**: Internet connection required for authentication and AI processing~~19* **Shell**: Works best in Bash or Zsh

~~11* **Shell**: Works best in Bash, Zsh or Fish~~

12* **Location**: [Anthropic supported countries](https://www.anthropic.com/supported-countries)20* **Location**: [Anthropic supported countries](https://www.anthropic.com/supported-countries)

13 21

14### Additional dependencies22### Additional dependencies

15 23

16* **ripgrep**: Usually included with Claude Code. If search fails, see [search troubleshooting](/en/troubleshooting#search-and-discovery-issues).24* **ripgrep**: Usually included with Claude Code. If search fails, see [search troubleshooting](/en/troubleshooting#search-and-discovery-issues).

25* **[Node.js 18+](https://nodejs.org/en/download)**: Only required for [deprecated npm installation](#npm-installation-deprecated)

17 26

~~18## Standard installation~~27## Installation

19 28

20To install Claude Code, use one of the following methods:29To install Claude Code, use one of the following methods:

21 30

38 ```batch theme={null}47 ```batch theme={null}

39 curl -fsSL https://claude.ai/install.cmd -o install.cmd && install.cmd && del install.cmd48 curl -fsSL https://claude.ai/install.cmd -o install.cmd && install.cmd && del install.cmd

40 ```49 ```

51 <Info>

52 Native installations automatically update in the background to keep you on the latest version.

53 </Info>

41 </Tab>54 </Tab>

42 55

43 <Tab title="Homebrew">56 <Tab title="Homebrew">

44 ```sh theme={null}57 ```sh theme={null}

45 brew install --cask claude-code58 brew install --cask claude-code

46 ```59 ```

~~47 </Tab>~~

48 60

~~49 <Tab title="NPM">~~61 <Info>

~~50 If you have [Node.js 18 or newer installed](https://nodejs.org/en/download/):~~62 Homebrew installations do not auto-update. Run `brew upgrade claude-code` periodically to get the latest features and security fixes.

63 </Info>

64 </Tab>

51 65

~~52 ```sh theme={null}~~66 <Tab title="WinGet">

~~53 npm install -g @anthropic-ai/claude-code~~67 ```powershell theme={null}

68 winget install Anthropic.ClaudeCode

54 ```69 ```

71 <Info>

72 WinGet installations do not auto-update. Run `winget upgrade Anthropic.ClaudeCode` periodically to get the latest features and security fixes.

73 </Info>

55 </Tab>74 </Tab>

56</Tabs>75</Tabs>

57 76

~~58<Note>~~

~~59 Some users may be automatically migrated to an improved installation method.~~

~~60</Note>~~

62After the installation process completes, navigate to your project and start Claude Code:77After the installation process completes, navigate to your project and start Claude Code:

63 78

64```bash theme={null}79```bash theme={null}

66claude81claude

67```82```

68 83

~~69Claude Code offers the following authentication options:~~84If you encounter any issues during installation, consult the [troubleshooting guide](/en/troubleshooting).

70 85

711. **Claude Console**: The default option. Connect through the Claude Console and complete the OAuth process. Requires active billing in the [Anthropic console](https://console.anthropic.com). A "Claude Code" workspace is automatically created for usage tracking and cost management. You can't create API keys for the Claude Code workspace; it's dedicated exclusively for Claude Code usage.86<Tip>

722. **Claude App (with Pro or Max plan)**: Subscribe to Claude's [Pro or Max plan](https://claude.com/pricing) for a unified subscription that includes both Claude Code and the web interface. Get more value at the same price point while managing your account in one place. Log in with your Claude.ai account. During launch, choose the option that matches your subscription type.87 Run `claude doctor` after installation to check your installation type and version.

733. **Enterprise platforms**: Configure Claude Code to use [Amazon Bedrock, Google Vertex AI, or Microsoft Foundry](/en/third-party-integrations) for enterprise deployments with your existing cloud infrastructure.88</Tip>

~~75<Note>~~

~~76 Claude Code securely stores your credentials. See [Credential Management](/en/iam#credential-management) for details.~~

~~77</Note>~~

~~79## Windows setup~~

~~81**Option 1: Claude Code within WSL**~~

~~83* Both WSL 1 and WSL 2 are supported~~

84 89

~~85**Option 2: Claude Code on native Windows with Git Bash**~~90### Platform-specific setup

86 91

~~87* Requires [Git for Windows](https://git-scm.com/downloads/win)~~92**Windows**: Run Claude Code natively (requires [Git Bash](https://git-scm.com/downloads/win)) or inside WSL. Both WSL 1 and WSL 2 are supported, but WSL 1 has limited support and does not support features like Bash tool sandboxing.

~~88* For portable Git installations, specify the path to your `bash.exe`:~~

~~89 ```powershell theme={null}~~

~~90 $env:CLAUDE_CODE_GIT_BASH_PATH="C:\Program Files\Git\bin\bash.exe"~~

~~91 ```~~

92 93

~~93## Alternative installation methods~~94**Alpine Linux and other musl/uClibc-based distributions**:

94 95

~~95Claude Code offers multiple installation methods to suit different environments.~~96The native installer on Alpine and other musl/uClibc-based distributions requires `libgcc`, `libstdc++`, and `ripgrep`. Install these using your distribution's package manager, then set `USE_BUILTIN_RIPGREP=0`.

96 97

~~97If you encounter any issues during installation, consult the [troubleshooting guide](/en/troubleshooting#linux-permission-issues).~~98On Alpine:

98 99

~~99<Tip>~~100```bash theme={null}

100 Run `claude doctor` after installation to check your installation type and version.101apk add libgcc libstdc++ ripgrep

101</Tip>102```

102 103

103### Native installation options104### Authentication

104 105

105The native installation is the recommended method and offers several benefits:106#### For individuals

106 107

107* One self-contained executable1081. **Claude Pro or Max plan** (recommended): Subscribe to Claude's [Pro or Max plan](https://claude.ai/pricing) for a unified subscription that includes both Claude Code and Claude on the web. Manage your account in one place and log in with your Claude.ai account.

108* No Node.js dependency1092. **Claude Console**: Connect through the [Claude Console](https://console.anthropic.com) and complete the OAuth process. Requires active billing in the Anthropic Console. A "Claude Code" workspace is automatically created for usage tracking and cost management. You can't create API keys for the Claude Code workspace; it's dedicated exclusively for Claude Code usage.

109* Improved auto-updater stability

110 110

111If you have an existing installation of Claude Code, use `claude install` to migrate to the native binary installation.111#### For teams and organizations

112 112

113For advanced installation options with the native installer:1131. **Claude for Teams or Enterprise** (recommended): Subscribe to [Claude for Teams](https://claude.com/pricing#team-&-enterprise) or [Claude for Enterprise](https://anthropic.com/contact-sales) for centralized billing, team management, and access to both Claude Code and Claude on the web. Team members log in with their Claude.ai accounts.

1142. **Claude Console with team billing**: Set up a shared [Claude Console](https://console.anthropic.com) organization with team billing. Invite team members and assign roles for usage tracking.

1153. **Cloud providers**: Configure Claude Code to use [Amazon Bedrock, Google Vertex AI, or Microsoft Foundry](/en/third-party-integrations) for deployments with your existing cloud infrastructure.

114 116

115**macOS, Linux, WSL:**117### Install a specific version

116 118

117```bash theme={null}119The native installer accepts either a specific version number or a release channel (`latest` or `stable`). The channel you choose at install time becomes your default for auto-updates. See [Configure release channel](#configure-release-channel) for more information.

118# Install stable version (default)

119curl -fsSL https://claude.ai/install.sh | bash

120 120

121# Install latest version121To install the latest version (default):

122curl -fsSL https://claude.ai/install.sh | bash -s latest

123 122

124# Install specific version number123<Tabs>

125curl -fsSL https://claude.ai/install.sh | bash -s 1.0.58124 <Tab title="macOS, Linux, WSL">

126```125 ```bash theme={null}

126 curl -fsSL https://claude.ai/install.sh | bash

127 ```

128 </Tab>

127 129

128<Note>130 <Tab title="Windows PowerShell">

129 **Alpine Linux and other musl/uClibc-based distributions**: The native build requires `libgcc`, `libstdc++`, and `ripgrep`. For Alpine: `apk add libgcc libstdc++ ripgrep`. Set `USE_BUILTIN_RIPGREP=0`.131 ```powershell theme={null}

130</Note>132 irm https://claude.ai/install.ps1 | iex

133 ```

134 </Tab>

131 135

132**Windows PowerShell:**136 <Tab title="Windows CMD">

137 ```batch theme={null}

138 curl -fsSL https://claude.ai/install.cmd -o install.cmd && install.cmd && del install.cmd

139 ```

140 </Tab>

141</Tabs>

133 142

134```powershell theme={null}143To install the stable version:

135# Install stable version (default)

136irm https://claude.ai/install.ps1 | iex

137 144

138# Install latest version145<Tabs>

139& ([scriptblock]::Create((irm https://claude.ai/install.ps1))) latest146 <Tab title="macOS, Linux, WSL">

147 ```bash theme={null}

148 curl -fsSL https://claude.ai/install.sh | bash -s stable

149 ```

150 </Tab>

140 151

141# Install specific version number152 <Tab title="Windows PowerShell">

142& ([scriptblock]::Create((irm https://claude.ai/install.ps1))) 1.0.58153 ```powershell theme={null}

143```154 & ([scriptblock]::Create((irm https://claude.ai/install.ps1))) stable

155 ```

156 </Tab>

144 157

145**Windows CMD:**158 <Tab title="Windows CMD">

159 ```batch theme={null}

160 curl -fsSL https://claude.ai/install.cmd -o install.cmd && install.cmd stable && del install.cmd

161 ```

162 </Tab>

163</Tabs>

146 164

147```batch theme={null}165To install a specific version number:

148REM Install stable version (default)

149curl -fsSL https://claude.ai/install.cmd -o install.cmd && install.cmd && del install.cmd

150 166

151REM Install latest version167<Tabs>

152curl -fsSL https://claude.ai/install.cmd -o install.cmd && install.cmd latest && del install.cmd168 <Tab title="macOS, Linux, WSL">

169 ```bash theme={null}

170 curl -fsSL https://claude.ai/install.sh | bash -s 1.0.58

171 ```

172 </Tab>

153 173

154REM Install specific version number174 <Tab title="Windows PowerShell">

155curl -fsSL https://claude.ai/install.cmd -o install.cmd && install.cmd 1.0.58 && del install.cmd175 ```powershell theme={null}

156```176 & ([scriptblock]::Create((irm https://claude.ai/install.ps1))) 1.0.58

177 ```

178 </Tab>

157 179

158<Tip>180 <Tab title="Windows CMD">

159 Make sure that you remove any outdated aliases or symlinks before installing.181 ```batch theme={null}

160</Tip>182 curl -fsSL https://claude.ai/install.cmd -o install.cmd && install.cmd 1.0.58 && del install.cmd

183 ```

184 </Tab>

185</Tabs>

161 186

162**Binary integrity and code signing**187### Binary integrity and code signing

163 188

164* SHA256 checksums for all platforms are published in the release manifests, currently located at `https://storage.googleapis.com/claude-code-dist-86c565f3-f756-42ad-8dfa-d59b1c096819/claude-code-releases/{VERSION}/manifest.json` (example: replace `{VERSION}` with `2.0.30`)189* SHA256 checksums for all platforms are published in the release manifests, currently located at `https://storage.googleapis.com/claude-code-dist-86c565f3-f756-42ad-8dfa-d59b1c096819/claude-code-releases/{VERSION}/manifest.json` (example: replace `{VERSION}` with `2.0.30`)

165* Signed binaries are distributed for the following platforms:190* Signed binaries are distributed for the following platforms:

166 * macOS: Signed by "Anthropic PBC" and notarized by Apple191 * macOS: Signed by "Anthropic PBC" and notarized by Apple

167 * Windows: Signed by "Anthropic, PBC"192 * Windows: Signed by "Anthropic, PBC"

168 193

169### NPM installation194## NPM installation (deprecated)

195

196NPM installation is deprecated. Use the [native installation](#installation) method when possible. To migrate an existing npm installation to native, run `claude install`.

170 197

171For environments where NPM is preferred or required:198**Global npm installation**

172 199

173```sh theme={null}200```sh theme={null}

174npm install -g @anthropic-ai/claude-code201npm install -g @anthropic-ai/claude-code

176 203

177<Warning>204<Warning>

178 Do NOT use `sudo npm install -g` as this can lead to permission issues and security risks.205 Do NOT use `sudo npm install -g` as this can lead to permission issues and security risks.

179 If you encounter permission errors, see [configure Claude Code](/en/troubleshooting#linux-permission-issues) for recommended solutions.206 If you encounter permission errors, see [troubleshooting permission errors](/en/troubleshooting#command-not-found-claude-or-permission-errors) for recommended solutions.

180</Warning>207</Warning>

181 208

182## Running on AWS or GCP209## Windows setup

210

211**Option 1: Claude Code within WSL**

183 212

184By default, Claude Code uses the Claude API.213* Both WSL 1 and WSL 2 are supported

214* WSL 2 supports [sandboxing](/en/sandboxing) for enhanced security. WSL 1 does not support sandboxing.

185 215

186For details on running Claude Code on AWS or GCP, see [third-party integrations](/en/third-party-integrations).216**Option 2: Claude Code on native Windows with Git Bash**

217

218* Requires [Git for Windows](https://git-scm.com/downloads/win)

219* For portable Git installations, specify the path to your `bash.exe`:

220 ```powershell theme={null}

221 $env:CLAUDE_CODE_GIT_BASH_PATH="C:\Program Files\Git\bin\bash.exe"

222 ```

187 223

188## Update Claude Code224## Update Claude Code

189 225

196* **Notifications**: You'll see a notification when updates are installed232* **Notifications**: You'll see a notification when updates are installed

197* **Applying updates**: Updates take effect the next time you start Claude Code233* **Applying updates**: Updates take effect the next time you start Claude Code

198 234

199**Disable auto-updates:**235<Note>

236 Homebrew and WinGet installations do not auto-update. Use `brew upgrade claude-code` or `winget upgrade Anthropic.ClaudeCode` to update manually.

237

238 **Known issue:** Claude Code may notify you of updates before the new version is available in these package managers. If an upgrade fails, wait and try again later.

239</Note>

240

241### Configure release channel

242

243Configure which release channel Claude Code follows for both auto-updates and `claude update` with the `autoUpdatesChannel` setting:

244

245* `"latest"` (default): Receive new features as soon as they're released

246* `"stable"`: Use a version that is typically about one week old, skipping releases with major regressions

247

248Configure this via `/config` → **Auto-update channel**, or add it to your [settings.json file](/en/settings):

249

250```json theme={null}

251{

252 "autoUpdatesChannel": "stable"

253}

254```

255

256For enterprise deployments, you can enforce a consistent release channel across your organization using [managed settings](/en/permissions#managed-settings).

257

258### Disable auto-updates

200 259

201Set the `DISABLE_AUTOUPDATER` environment variable in your shell or [settings.json file](/en/settings):260Set the `DISABLE_AUTOUPDATER` environment variable in your shell or [settings.json file](/en/settings):

202 261

216 275

217### Native installation276### Native installation

218 277

219Remove the Claude Code binary and symlink:278Remove the Claude Code binary and version files:

220 279

221**macOS, Linux, WSL:**280**macOS, Linux, WSL:**

222 281

223```bash theme={null}282```bash theme={null}

224rm -f ~/.local/bin/claude283rm -f ~/.local/bin/claude

225rm -rf ~/.claude-code284rm -rf ~/.local/share/claude

226```285```

227 286

228**Windows PowerShell:**287**Windows PowerShell:**

229 288

230```powershell theme={null}289```powershell theme={null}

231Remove-Item -Path "$env:LOCALAPPDATA\Programs\claude-code" -Recurse -Force290Remove-Item -Path "$env:USERPROFILE\.local\bin\claude.exe" -Force

232Remove-Item -Path "$env:LOCALAPPDATA\Microsoft\WindowsApps\claude.exe" -Force291Remove-Item -Path "$env:USERPROFILE\.local\share\claude" -Recurse -Force

233```292```

234 293

235**Windows CMD:**294**Windows CMD:**

236 295

237```batch theme={null}296```batch theme={null}

238rmdir /s /q "%LOCALAPPDATA%\Programs\claude-code"297del "%USERPROFILE%\.local\bin\claude.exe"

239del "%LOCALAPPDATA%\Microsoft\WindowsApps\claude.exe"298rmdir /s /q "%USERPROFILE%\.local\share\claude"

240```299```

241 300

242### Homebrew installation301### Homebrew installation

245brew uninstall --cask claude-code304brew uninstall --cask claude-code

246```305```

247 306

307### WinGet installation

308

309```powershell theme={null}

310winget uninstall Anthropic.ClaudeCode

311```

312

248### NPM installation313### NPM installation

249 314

250```bash theme={null}315```bash theme={null}

294rmdir /s /q ".claude"359rmdir /s /q ".claude"

295del ".mcp.json"360del ".mcp.json"

296```361```

~~297~~

~~298~~

~~299~~

300> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

skills.md +492 −417

Details

~~1# Agent Skills~~1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

2 4

~~3> Create, manage, and share Skills to extend Claude's capabilities in Claude Code.~~5# Extend Claude with skills

4 6

5This guide shows you how to create, use, and manage Agent Skills in Claude Code. Skills are modular capabilities that extend Claude's functionality through organized folders containing instructions, scripts, and resources.7> Create, manage, and share skills to extend Claude's capabilities in Claude Code. Includes custom slash commands.

6 8

~~7## Prerequisites~~9Skills extend what Claude can do. Create a `SKILL.md` file with instructions, and Claude adds it to its toolkit. Claude uses skills when relevant, or you can invoke one directly with `/skill-name`.

~~9* Claude Code version 1.0 or later~~

~~10* Basic familiarity with [Claude Code](/en/quickstart)~~

~~12## What are Agent Skills?~~

14Agent Skills package expertise into discoverable capabilities. Each Skill consists of a `SKILL.md` file with instructions that Claude reads when relevant, plus optional supporting files like scripts and templates.

16**How Skills are invoked**: Skills are **model-invoked**—Claude autonomously decides when to use them based on your request and the Skill's description. This is different from slash commands, which are **user-invoked** (you explicitly type `/command` to trigger them).

~~18**Benefits**:~~

~~20* Extend Claude's capabilities for your specific workflows~~

~~21* Share expertise across your team via git~~

~~22* Reduce repetitive prompting~~

~~23* Compose multiple Skills for complex tasks~~

~~25Learn more in the [Agent Skills overview](https://docs.claude.com/en/docs/agents-and-tools/agent-skills/overview).~~

26 10

27<Note>11<Note>

28 For a deep dive into the architecture and real-world applications of Agent Skills, read our engineering blog: [Equipping agents for the real world with Agent Skills](https://www.anthropic.com/engineering/equipping-agents-for-the-real-world-with-agent-skills).12 For built-in commands like `/help` and `/compact`, see [interactive mode](/en/interactive-mode#built-in-commands).

~~29</Note>~~

~~31## Create a Skill~~

32 13

~~33Skills are stored as directories containing a `SKILL.md` file.~~14 **Custom slash commands have been merged into skills.** A file at `.claude/commands/review.md` and a skill at `.claude/skills/review/SKILL.md` both create `/review` and work the same way. Your existing `.claude/commands/` files keep working. Skills add optional features: a directory for supporting files, frontmatter to [control whether you or Claude invokes them](#control-who-invokes-a-skill), and the ability for Claude to load them automatically when relevant.

15</Note>

34 16

~~35### Personal Skills~~17Claude Code skills follow the [Agent Skills](https://agentskills.io) open standard, which works across multiple AI tools. Claude Code extends the standard with additional features like [invocation control](#control-who-invokes-a-skill), [subagent execution](#run-skills-in-a-subagent), and [dynamic context injection](#inject-dynamic-context).

36 18

~~37Personal Skills are available across all your projects. Store them in `~/.claude/skills/`:~~19## Getting started

38 20

~~39```bash theme={null}~~21### Create your first skill

~~40mkdir -p ~/.claude/skills/my-skill-name~~

~~41```~~

42 22

~~43**Use personal Skills for**:~~23This example creates a skill that teaches Claude to explain code using visual diagrams and analogies. Since it uses default frontmatter, Claude can load it automatically when you ask how something works, or you can invoke it directly with `/explain-code`.

44 24

~~45* Your individual workflows and preferences~~25<Steps>

~~46* Experimental Skills you're developing~~26 <Step title="Create the skill directory">

~~47* Personal productivity tools~~27 Create a directory for the skill in your personal skills folder. Personal skills are available across all your projects.

48 28

~~49### Project Skills~~29 ```bash theme={null}

30 mkdir -p ~/.claude/skills/explain-code

31 ```

32 </Step>

50 33

~~51Project Skills are shared with your team. Store them in `.claude/skills/` within your project:~~34 <Step title="Write SKILL.md">

35 Every skill needs a `SKILL.md` file with two parts: YAML frontmatter (between `---` markers) that tells Claude when to use the skill, and markdown content with instructions Claude follows when the skill is invoked. The `name` field becomes the `/slash-command`, and the `description` helps Claude decide when to load it automatically.

52 36

~~53```bash theme={null}~~37 Create `~/.claude/skills/explain-code/SKILL.md`:

~~54mkdir -p .claude/skills/my-skill-name~~

~~55```~~

56 38

~~57**Use project Skills for**:~~39 ```yaml theme={null}

40 ---

41 name: explain-code

42 description: Explains code with visual diagrams and analogies. Use when explaining how code works, teaching about a codebase, or when the user asks "how does this work?"

43 ---

58 44

~~59* Team workflows and conventions~~45 When explaining code, always include:

~~60* Project-specific expertise~~

~~61* Shared utilities and scripts~~

62 46

~~63Project Skills are checked into git and automatically available to team members.~~47 1. **Start with an analogy**: Compare the code to something from everyday life

48 2. **Draw a diagram**: Use ASCII art to show the flow, structure, or relationships

49 3. **Walk through the code**: Explain step-by-step what happens

50 4. **Highlight a gotcha**: What's a common mistake or misconception?

64 51

~~65### Plugin Skills~~52 Keep explanations conversational. For complex concepts, use multiple analogies.

53 ```

54 </Step>

66 55

67Skills can also come from [Claude Code plugins](/en/plugins). Plugins may bundle Skills that are automatically available when the plugin is installed. These Skills work the same way as personal and project Skills.56 <Step title="Test the skill">

57 You can test it two ways:

68 58

~~69## Write SKILL.md~~59 **Let Claude invoke it automatically** by asking something that matches the description:

70 60

~~71Create a `SKILL.md` file with YAML frontmatter and Markdown content:~~61 ```

62 How does this code work?

63 ```

72 64

~~73```yaml theme={null}~~65 **Or invoke it directly** with the skill name:

~~74name: your-skill-name~~

~~75description: Brief description of what this Skill does and when to use it~~

76 66

~~77# Your Skill Name~~67 ```

68 /explain-code src/auth/login.ts

69 ```

78 70

~~79## Instructions~~71 Either way, Claude should include an analogy and ASCII diagram in its explanation.

~~80Provide clear, step-by-step guidance for Claude.~~72 </Step>

73</Steps>

81 74

~~82## Examples~~75### Where skills live

~~83Show concrete examples of using this Skill.~~

~~84```~~

85 76

~~86**Field requirements**:~~77Where you store a skill determines who can use it:

87 78

~~88* `name`: Must use lowercase letters, numbers, and hyphens only (max 64 characters)~~79| Location | Path | Applies to |

~~89* `description`: Brief description of what the Skill does and when to use it (max 1024 characters)~~80| :--------- | :------------------------------------------------------- | :----------------------------- |

81| Enterprise | See [managed settings](/en/permissions#managed-settings) | All users in your organization |

82| Personal | `~/.claude/skills/<skill-name>/SKILL.md` | All your projects |

83| Project | `.claude/skills/<skill-name>/SKILL.md` | This project only |

84| Plugin | `<plugin>/skills/<skill-name>/SKILL.md` | Where plugin is enabled |

90 85

~~91The `description` field is critical for Claude to discover when to use your Skill. It should include both what the Skill does and when Claude should use it.~~86When skills share the same name across levels, higher-priority locations win: enterprise > personal > project. Plugin skills use a `plugin-name:skill-name` namespace, so they cannot conflict with other levels. If you have files in `.claude/commands/`, those work the same way, but if a skill and a command share the same name, the skill takes precedence.

92 87

~~93See the [best practices guide](https://docs.claude.com/en/docs/agents-and-tools/agent-skills/best-practices) for complete authoring guidance including validation rules.~~88#### Automatic discovery from nested directories

94 89

~~95## Add supporting files~~90When you work with files in subdirectories, Claude Code automatically discovers skills from nested `.claude/skills/` directories. For example, if you're editing a file in `packages/frontend/`, Claude Code also looks for skills in `packages/frontend/.claude/skills/`. This supports monorepo setups where packages have their own skills.

96 91

~~97Create additional files alongside SKILL.md:~~92Each skill is a directory with `SKILL.md` as the entrypoint:

98 93

99```94```

100my-skill/95my-skill/

101├── SKILL.md (required)96├── SKILL.md # Main instructions (required)

102├── reference.md (optional documentation)97├── template.md # Template for Claude to fill in

103├── examples.md (optional examples)98├── examples/

104├── scripts/99│ └── sample.md # Example output showing expected format

105│ └── helper.py (optional utility)100└── scripts/

106└── templates/101 └── validate.sh # Script Claude can execute

107 └── template.txt (optional template)

108```

~~109~~

110Reference these files from SKILL.md:

~~111~~

112````markdown theme={null}

113For advanced usage, see [reference.md](reference.md).

~~114~~

115Run the helper script:

116```bash

117python scripts/helper.py input.txt

118```

119````

~~120~~

121Claude reads these files only when needed, using progressive disclosure to manage context efficiently.

~~122~~

123## Restrict tool access with allowed-tools

~~124~~

125Use the `allowed-tools` frontmatter field to limit which tools Claude can use when a Skill is active:

~~126~~

127```yaml theme={null}

128name: safe-file-reader

129description: Read files without making changes. Use when you need read-only file access.

130allowed-tools: Read, Grep, Glob

~~131~~

132# Safe File Reader

~~133~~

134This Skill provides read-only file access.

~~135~~

136## Instructions

1371. Use Read to view file contents

1382. Use Grep to search within files

1393. Use Glob to find files by pattern

140```102```

141 103

142When this Skill is active, Claude can only use the specified tools (Read, Grep, Glob) without needing to ask for permission. This is useful for:104The `SKILL.md` contains the main instructions and is required. Other files are optional and let you build more powerful skills: templates for Claude to fill in, example outputs showing the expected format, scripts Claude can execute, or detailed reference documentation. Reference these files from your `SKILL.md` so Claude knows what they contain and when to load them. See [Add supporting files](#add-supporting-files) for more details.

~~143~~

144* Read-only Skills that shouldn't modify files

145* Skills with limited scope: for example, only data analysis, no file writing

146* Security-sensitive workflows where you want to restrict capabilities

~~147~~

148If `allowed-tools` isn't specified, Claude will ask for permission to use tools as normal, following the standard permission model.

149 105

150<Note>106<Note>

151 `allowed-tools` is only supported for Skills in Claude Code.107 Files in `.claude/commands/` still work and support the same [frontmatter](#frontmatter-reference). Skills are recommended since they support additional features like supporting files.

152</Note>108</Note>

153 109

154## View available Skills110#### Skills from additional directories

~~155~~

156Skills are automatically discovered by Claude from three sources:

~~157~~

158* Personal Skills: `~/.claude/skills/`

159* Project Skills: `.claude/skills/`

160* Plugin Skills: bundled with installed plugins

161 111

162**To view all available Skills**, ask Claude directly:112Skills defined in `.claude/skills/` within directories added via `--add-dir` are loaded automatically and picked up by live change detection, so you can edit them during a session without restarting.

163 113

164```114<Note>

165What Skills are available?115 CLAUDE.md files from `--add-dir` directories are not loaded by default. To load them, set `CLAUDE_CODE_ADDITIONAL_DIRECTORIES_CLAUDE_MD=1`. See [Load memory from additional directories](/en/memory#load-memory-from-additional-directories).

166```116</Note>

167 117

168or118## Configure skills

169 119

170```120Skills are configured through YAML frontmatter at the top of `SKILL.md` and the markdown content that follows.

171List all available Skills

172```

173 121

174This will show all Skills from all sources, including plugin Skills.122### Types of skill content

175 123

176**To inspect a specific Skill**, you can also check the filesystem:124Skill files can contain any instructions, but thinking about how you want to invoke them helps guide what to include:

177 125

178```bash theme={null}126**Reference content** adds knowledge Claude applies to your current work. Conventions, patterns, style guides, domain knowledge. This content runs inline so Claude can use it alongside your conversation context.

179# List personal Skills

180ls ~/.claude/skills/

181 127

182# List project Skills (if in a project directory)128```yaml theme={null}

183ls .claude/skills/129---

130name: api-conventions

131description: API design patterns for this codebase

132---

184 133

185# View a specific Skill's content134When writing API endpoints:

186cat ~/.claude/skills/my-skill/SKILL.md135- Use RESTful naming conventions

136- Return consistent error formats

137- Include request validation

187```138```

188 139

189## Test a Skill140**Task content** gives Claude step-by-step instructions for a specific action, like deployments, commits, or code generation. These are often actions you want to invoke directly with `/skill-name` rather than letting Claude decide when to run them. Add `disable-model-invocation: true` to prevent Claude from triggering it automatically.

~~190~~

191After creating a Skill, test it by asking questions that match your description.

192 141

193**Example**: If your description mentions "PDF files":142```yaml theme={null}

143---

144name: deploy

145description: Deploy the application to production

146context: fork

147disable-model-invocation: true

148---

194 149

150Deploy the application:

1511. Run the test suite

1522. Build the application

1533. Push to the deployment target

195```154```

196Can you help me extract text from this PDF?

197```

~~198~~

199Claude autonomously decides to use your Skill if it matches the request—you don't need to explicitly invoke it. The Skill activates automatically based on the context of your question.

200 155

201## Debug a Skill156Your `SKILL.md` can contain anything, but thinking through how you want the skill invoked (by you, by Claude, or both) and where you want it to run (inline or in a subagent) helps guide what to include. For complex skills, you can also [add supporting files](#add-supporting-files) to keep the main skill focused.

202 157

203If Claude doesn't use your Skill, check these common issues:158### Frontmatter reference

204 159

205### Make description specific160Beyond the markdown content, you can configure skill behavior using YAML frontmatter fields between `---` markers at the top of your `SKILL.md` file:

~~206~~

207**Too vague**:

208 161

209```yaml theme={null}162```yaml theme={null}

210description: Helps with documents163---

211```164name: my-skill

~~212~~ 165description: What this skill does

213**Specific**:166disable-model-invocation: true

167allowed-tools: Read, Grep

168---

214 169

215```yaml theme={null}170Your skill instructions here...

216description: Extract text and tables from PDF files, fill forms, merge documents. Use when working with PDF files or when the user mentions PDFs, forms, or document extraction.

217```171```

218 172

219Include both what the Skill does and when to use it in the description.173All fields are optional. Only `description` is recommended so Claude knows when to use the skill.

220 174

221### Verify file path175| Field | Required | Description |

176| :------------------------- | :---------- | :---------------------------------------------------------------------------------------------------------------------------------------------------- |

177| `name` | No | Display name for the skill. If omitted, uses the directory name. Lowercase letters, numbers, and hyphens only (max 64 characters). |

178| `description` | Recommended | What the skill does and when to use it. Claude uses this to decide when to apply the skill. If omitted, uses the first paragraph of markdown content. |

179| `argument-hint` | No | Hint shown during autocomplete to indicate expected arguments. Example: `[issue-number]` or `[filename] [format]`. |

180| `disable-model-invocation` | No | Set to `true` to prevent Claude from automatically loading this skill. Use for workflows you want to trigger manually with `/name`. Default: `false`. |

181| `user-invocable` | No | Set to `false` to hide from the `/` menu. Use for background knowledge users shouldn't invoke directly. Default: `true`. |

182| `allowed-tools` | No | Tools Claude can use without asking permission when this skill is active. |

183| `model` | No | Model to use when this skill is active. |

184| `context` | No | Set to `fork` to run in a forked subagent context. |

185| `agent` | No | Which subagent type to use when `context: fork` is set. |

186| `hooks` | No | Hooks scoped to this skill's lifecycle. See [Hooks in skills and agents](/en/hooks#hooks-in-skills-and-agents) for configuration format. |

222 187

223**Personal Skills**: `~/.claude/skills/skill-name/SKILL.md`188#### Available string substitutions

224**Project Skills**: `.claude/skills/skill-name/SKILL.md`

225 189

226Check the file exists:190Skills support string substitution for dynamic values in the skill content:

227 191

228```bash theme={null}192| Variable | Description |

229# Personal193| :--------------------- | :------------------------------------------------------------------------------------------------------------------------------------------- |

230ls ~/.claude/skills/my-skill/SKILL.md194| `$ARGUMENTS` | All arguments passed when invoking the skill. If `$ARGUMENTS` is not present in the content, arguments are appended as `ARGUMENTS: <value>`. |

195| `$ARGUMENTS[N]` | Access a specific argument by 0-based index, such as `$ARGUMENTS[0]` for the first argument. |

196| `$N` | Shorthand for `$ARGUMENTS[N]`, such as `$0` for the first argument or `$1` for the second. |

197| `${CLAUDE_SESSION_ID}` | The current session ID. Useful for logging, creating session-specific files, or correlating skill output with sessions. |

231 198

232# Project199**Example using substitutions:**

233ls .claude/skills/my-skill/SKILL.md

234```

235 200

236### Check YAML syntax201```yaml theme={null}

202---

203name: session-logger

204description: Log activity for this session

205---

237 206

238Invalid YAML prevents the Skill from loading. Verify the frontmatter:207Log the following to logs/${CLAUDE_SESSION_ID}.log:

239 208

240```bash theme={null}209$ARGUMENTS

241cat SKILL.md | head -n 10

242```210```

243 211

244Ensure:212### Add supporting files

~~245~~

246* Opening `---` on line 1

247* Closing `---` before Markdown content

248* Valid YAML syntax (no tabs, correct indentation)

~~249~~

250### View errors

251 213

252Run Claude Code with debug mode to see Skill loading errors:214Skills can include multiple files in their directory. This keeps `SKILL.md` focused on the essentials while letting Claude access detailed reference material only when needed. Large reference docs, API specifications, or example collections don't need to load into context every time the skill runs.

253 215

254```bash theme={null}

255claude --debug

256```216```

~~257~~ 217my-skill/

258## Share Skills with your team218├── SKILL.md (required - overview and navigation)

~~259~~ 219├── reference.md (detailed API docs - loaded when needed)

260**Recommended approach**: Distribute Skills through [plugins](/en/plugins).220├── examples.md (usage examples - loaded when needed)

~~261~~ 221└── scripts/

262To share Skills via plugin:222 └── helper.py (utility script - executed, not loaded)

~~263~~

2641. Create a plugin with Skills in the `skills/` directory

2652. Add the plugin to a marketplace

2663. Team members install the plugin

~~267~~

268For complete instructions, see [Add Skills to your plugin](/en/plugins#add-skills-to-your-plugin).

~~269~~

270You can also share Skills directly through project repositories:

~~271~~

272### Step 1: Add Skill to your project

~~273~~

274Create a project Skill:

~~275~~

276```bash theme={null}

277mkdir -p .claude/skills/team-skill

278# Create SKILL.md

279```

~~280~~

281### Step 2: Commit to git

~~282~~

283```bash theme={null}

284git add .claude/skills/

285git commit -m "Add team Skill for PDF processing"

286git push

287```223```

288 224

289### Step 3: Team members get Skills automatically225Reference supporting files from `SKILL.md` so Claude knows what each file contains and when to load it:

290 226

291When team members pull the latest changes, Skills are immediately available:227```markdown theme={null}

228## Additional resources

292 229

293```bash theme={null}230- For complete API details, see [reference.md](reference.md)

294git pull231- For usage examples, see [examples.md](examples.md)

295claude # Skills are now available

296```232```

297 233

298## Update a Skill234<Tip>Keep `SKILL.md` under 500 lines. Move detailed reference material to separate files.</Tip>

299 235

300Edit SKILL.md directly:236### Control who invokes a skill

301 237

302```bash theme={null}238By default, both you and Claude can invoke any skill. You can type `/skill-name` to invoke it directly, and Claude can load it automatically when relevant to your conversation. Two frontmatter fields let you restrict this:

303# Personal Skill

304code ~/.claude/skills/my-skill/SKILL.md

305 239

306# Project Skill240* **`disable-model-invocation: true`**: Only you can invoke the skill. Use this for workflows with side effects or that you want to control timing, like `/commit`, `/deploy`, or `/send-slack-message`. You don't want Claude deciding to deploy because your code looks ready.

307code .claude/skills/my-skill/SKILL.md

308```

309 241

310Changes take effect the next time you start Claude Code. If Claude Code is already running, restart it to load the updates.242* **`user-invocable: false`**: Only Claude can invoke the skill. Use this for background knowledge that isn't actionable as a command. A `legacy-system-context` skill explains how an old system works. Claude should know this when relevant, but `/legacy-system-context` isn't a meaningful action for users to take.

311 243

312## Remove a Skill244This example creates a deploy skill that only you can trigger. The `disable-model-invocation: true` field prevents Claude from running it automatically:

313 245

314Delete the Skill directory:246```yaml theme={null}

247---

248name: deploy

249description: Deploy the application to production

250disable-model-invocation: true

251---

315 252

316```bash theme={null}253Deploy $ARGUMENTS to production:

317# Personal

318rm -rf ~/.claude/skills/my-skill

319 254

320# Project2551. Run the test suite

321rm -rf .claude/skills/my-skill2562. Build the application

322git commit -m "Remove unused Skill"2573. Push to the deployment target

2584. Verify the deployment succeeded

323```259```

324 260

325## Best practices261Here's how the two fields affect invocation and context loading:

~~326~~

327### Keep Skills focused

328 262

264| :------------------------------- | :------------- | :---------------- | :----------------------------------------------------------- |

265| (default) | Yes | Yes | Description always in context, full skill loads when invoked |

266| `disable-model-invocation: true` | Yes | No | Description not in context, full skill loads when you invoke |

267| `user-invocable: false` | No | Yes | Description always in context, full skill loads when invoked |

330 268

331**Focused**:269<Note>

270 In a regular session, skill descriptions are loaded into context so Claude knows what's available, but full skill content only loads when invoked. [Subagents with preloaded skills](/en/sub-agents#preload-skills-into-subagents) work differently: the full skill content is injected at startup.

271</Note>

332 272

333* "PDF form filling"273### Restrict tool access

334* "Excel data analysis"

335* "Git commit messages"

336 274

337**Too broad**:275Use the `allowed-tools` field to limit which tools Claude can use when a skill is active. This skill creates a read-only mode where Claude can explore files but not modify them:

338 276

339* "Document processing" (split into separate Skills)277```yaml theme={null}

340* "Data tools" (split by data type or operation)278---

279name: safe-reader

280description: Read files without making changes

281allowed-tools: Read, Grep, Glob

282---

283```

341 284

342### Write clear descriptions285### Pass arguments to skills

343 286

344Help Claude discover when to use Skills by including specific triggers in your description:287Both you and Claude can pass arguments when invoking a skill. Arguments are available via the `$ARGUMENTS` placeholder.

345 288

346**Clear**:289This skill fixes a GitHub issue by number. The `$ARGUMENTS` placeholder gets replaced with whatever follows the skill name:

347 290

348```yaml theme={null}291```yaml theme={null}

349description: Analyze Excel spreadsheets, create pivot tables, and generate charts. Use when working with Excel files, spreadsheets, or analyzing tabular data in .xlsx format.292---

350```293name: fix-issue

294description: Fix a GitHub issue

295disable-model-invocation: true

296---

351 297

352**Vague**:298Fix GitHub issue $ARGUMENTS following our coding standards.

353 299

354```yaml theme={null}3001. Read the issue description

355description: For files3012. Understand the requirements

3023. Implement the fix

3034. Write tests

3045. Create a commit

356```305```

357 306

358### Test with your team307When you run `/fix-issue 123`, Claude receives "Fix GitHub issue 123 following our coding standards..."

359 308

360Have teammates use Skills and provide feedback:309If you invoke a skill with arguments but the skill doesn't include `$ARGUMENTS`, Claude Code appends `ARGUMENTS: <your input>` to the end of the skill content so Claude still sees what you typed.

361 310

362* Does the Skill activate when expected?311To access individual arguments by position, use `$ARGUMENTS[N]` or the shorter `$N`:

363* Are the instructions clear?

364* Are there missing examples or edge cases?

365 312

366### Document Skill versions313```yaml theme={null}

~~367~~ 314---

368You can document Skill versions in your SKILL.md content to track changes over time. Add a version history section:315name: migrate-component

~~369~~ 316description: Migrate a component from one framework to another

370```markdown theme={null}317---

371# My Skill

372 318

373## Version History319Migrate the $ARGUMENTS[0] component from $ARGUMENTS[1] to $ARGUMENTS[2].

374- v2.0.0 (2025-10-01): Breaking changes to API320Preserve all existing behavior and tests.

375- v1.1.0 (2025-09-15): Added new features

376- v1.0.0 (2025-09-01): Initial release

377```321```

378 322

379This helps team members understand what changed between versions.323Running `/migrate-component SearchBar React Vue` replaces `$ARGUMENTS[0]` with `SearchBar`, `$ARGUMENTS[1]` with `React`, and `$ARGUMENTS[2]` with `Vue`. The same skill using the `$N` shorthand:

380 324

381## Troubleshooting325```yaml theme={null}

326---

327name: migrate-component

328description: Migrate a component from one framework to another

329---

382 330

383### Claude doesn't use my Skill331Migrate the $0 component from $1 to $2.

332Preserve all existing behavior and tests.

333```

384 334

385**Symptom**: You ask a relevant question but Claude doesn't use your Skill.335## Advanced patterns

386 336

387**Check**: Is the description specific enough?337### Inject dynamic context

388 338

389Vague descriptions make discovery difficult. Include both what the Skill does and when to use it, with key terms users would mention.339The `!`command\`\` syntax runs shell commands before the skill content is sent to Claude. The command output replaces the placeholder, so Claude receives actual data, not the command itself.

390 340

391**Too generic**:341This skill summarizes a pull request by fetching live PR data with the GitHub CLI. The `!`gh pr diff\`\` and other commands run first, and their output gets inserted into the prompt:

392 342

393```yaml theme={null}343```yaml theme={null}

394description: Helps with data344---

395```345name: pr-summary

346description: Summarize changes in a pull request

347context: fork

348agent: Explore

349allowed-tools: Bash(gh *)

350---

396 351

397**Specific**:352## Pull request context

353- PR diff: !`gh pr diff`

354- PR comments: !`gh pr view --comments`

355- Changed files: !`gh pr diff --name-only`

398 356

399```yaml theme={null}357## Your task

400description: Analyze Excel spreadsheets, generate pivot tables, create charts. Use when working with Excel files, spreadsheets, or .xlsx files.358Summarize this pull request...

401```359```

402 360

403**Check**: Is the YAML valid?361When this skill runs:

404 362

405Run validation to check for syntax errors:3631. Each `!`command\`\` executes immediately (before Claude sees anything)

3642. The output replaces the placeholder in the skill content

3653. Claude receives the fully-rendered prompt with actual PR data

406 366

407```bash theme={null}367This is preprocessing, not something Claude executes. Claude only sees the final result.

408# View frontmatter

409cat .claude/skills/my-skill/SKILL.md | head -n 15

410 368

411# Check for common issues369<Tip>

412# - Missing opening or closing ---370 To enable [extended thinking](/en/common-workflows#use-extended-thinking-thinking-mode) in a skill, include the word "ultrathink" anywhere in your skill content.

413# - Tabs instead of spaces371</Tip>

414# - Unquoted strings with special characters

415```

416 372

417**Check**: Is the Skill in the correct location?373### Run skills in a subagent

418 374

419```bash theme={null}375Add `context: fork` to your frontmatter when you want a skill to run in isolation. The skill content becomes the prompt that drives the subagent. It won't have access to your conversation history.

420# Personal Skills

421ls ~/.claude/skills/*/SKILL.md

422 376

423# Project Skills377<Warning>

424ls .claude/skills/*/SKILL.md378 `context: fork` only makes sense for skills with explicit instructions. If your skill contains guidelines like "use these API conventions" without a task, the subagent receives the guidelines but no actionable prompt, and returns without meaningful output.

425```379</Warning>

426 380

427### Skill has errors381Skills and [subagents](/en/sub-agents) work together in two directions:

428 382

384| :--------------------------- | :---------------------------------------- | :-------------------------- | :--------------------------- |

430 387

431**Check**: Are dependencies available?388With `context: fork`, you write the task in your skill and pick an agent type to execute it. For the inverse (defining a custom subagent that uses skills as reference material), see [Subagents](/en/sub-agents#preload-skills-into-subagents).

432 389

433Claude will automatically install required dependencies (or ask for permission to install them) when it needs them.390#### Example: Research skill using Explore agent

434 391

435**Check**: Do scripts have execute permissions?392This skill runs research in a forked Explore agent. The skill content becomes the task, and the agent provides read-only tools optimized for codebase exploration:

436 393

437```bash theme={null}394```yaml theme={null}

438chmod +x .claude/skills/my-skill/scripts/*.py395---

439```396name: deep-research

397description: Research a topic thoroughly

398context: fork

399agent: Explore

400---

440 401

441**Check**: Are file paths correct?402Research $ARGUMENTS thoroughly:

442 403

443Use forward slashes (Unix style) in all paths:4041. Find relevant files using Glob and Grep

4052. Read and analyze the code

4063. Summarize findings with specific file references

407```

444 408

445**Correct**: `scripts/helper.py`409When this skill runs:

446**Wrong**: `scripts\helper.py` (Windows style)

447 410

448### Multiple Skills conflict4111. A new isolated context is created

4122. The subagent receives the skill content as its prompt ("Research \$ARGUMENTS thoroughly...")

4133. The `agent` field determines the execution environment (model, tools, and permissions)

4144. Results are summarized and returned to your main conversation

449 415

450**Symptom**: Claude uses the wrong Skill or seems confused between similar Skills.416The `agent` field specifies which subagent configuration to use. Options include built-in agents (`Explore`, `Plan`, `general-purpose`) or any custom subagent from `.claude/agents/`. If omitted, uses `general-purpose`.

451 417

452**Be specific in descriptions**: Help Claude choose the right Skill by using distinct trigger terms in your descriptions.418### Restrict Claude's skill access

453 419

454Instead of:420By default, Claude can invoke any skill that doesn't have `disable-model-invocation: true` set. Skills that define `allowed-tools` grant Claude access to those tools without per-use approval when the skill is active. Your [permission settings](/en/permissions) still govern baseline approval behavior for all other tools. Built-in commands like `/compact` and `/init` are not available through the Skill tool.

455 421

456```yaml theme={null}422Three ways to control which skills Claude can invoke:

457# Skill 1423

458description: For data analysis424**Disable all skills** by denying the Skill tool in `/permissions`:

459 425

460# Skill 2426```

461description: For analyzing data427# Add to deny rules:

428Skill

462```429```

463 430

464Use:431**Allow or deny specific skills** using [permission rules](/en/permissions):

465 432

466```yaml theme={null}433```

467# Skill 1434# Allow only specific skills

468description: Analyze sales data in Excel files and CRM exports. Use for sales reports, pipeline analysis, and revenue tracking.435Skill(commit)

436Skill(review-pr *)

469 437

470# Skill 2438# Deny specific skills

471description: Analyze log files and system metrics data. Use for performance monitoring, debugging, and system diagnostics.439Skill(deploy *)

472```440```

473 441

474## Examples442Permission syntax: `Skill(name)` for exact match, `Skill(name *)` for prefix match with any arguments.

475 443

476### Simple Skill (single file)444**Hide individual skills** by adding `disable-model-invocation: true` to their frontmatter. This removes the skill from Claude's context entirely.

477 445

478```446<Note>

479commit-helper/447 The `user-invocable` field only controls menu visibility, not Skill tool access. Use `disable-model-invocation: true` to block programmatic invocation.

480└── SKILL.md448</Note>

481```

482 449

483```yaml theme={null}450## Share skills

484name: generating-commit-messages

485description: Generates clear commit messages from git diffs. Use when writing commit messages or reviewing staged changes.

486 451

487# Generating Commit Messages452Skills can be distributed at different scopes depending on your audience:

488 453

489## Instructions454* **Project skills**: Commit `.claude/skills/` to version control

455* **Plugins**: Create a `skills/` directory in your [plugin](/en/plugins)

456* **Managed**: Deploy organization-wide through [managed settings](/en/permissions#managed-settings)

490 457

4911. Run `git diff --staged` to see changes458### Generate visual output

4922. I'll suggest a commit message with:

493 - Summary under 50 characters

494 - Detailed description

495 - Affected components

496 459

497## Best practices460Skills can bundle and run scripts in any language, giving Claude capabilities beyond what's possible in a single prompt. One powerful pattern is generating visual output: interactive HTML files that open in your browser for exploring data, debugging, or creating reports.

498 461

499- Use present tense462This example creates a codebase explorer: an interactive tree view where you can expand and collapse directories, see file sizes at a glance, and identify file types by color.

500- Explain what and why, not how

501```

502 463

503### Skill with tool permissions464Create the Skill directory:

504 465

505```466```bash theme={null}

506code-reviewer/467mkdir -p ~/.claude/skills/codebase-visualizer/scripts

507└── SKILL.md

508```468```

509 469

510```yaml theme={null}470Create `~/.claude/skills/codebase-visualizer/SKILL.md`. The description tells Claude when to activate this Skill, and the instructions tell Claude to run the bundled script:

471

472````yaml theme={null}

511---473---

512name: code-reviewer474name: codebase-visualizer

513description: Review code for best practices and potential issues. Use when reviewing code, checking PRs, or analyzing code quality.475description: Generate an interactive collapsible tree visualization of your codebase. Use when exploring a new repo, understanding project structure, or identifying large files.

514allowed-tools: Read, Grep, Glob476allowed-tools: Bash(python *)

515---477---

516 478

517# Code Reviewer479# Codebase Visualizer

~~518~~

519## Review checklist

~~520~~

5211. Code organization and structure

5222. Error handling

5233. Performance considerations

5244. Security concerns

5255. Test coverage

526 480

527## Instructions481Generate an interactive HTML tree view that shows your project's file structure with collapsible directories.

528 482

5291. Read the target files using Read tool483## Usage

5302. Search for patterns using Grep

5313. Find related files using Glob

5324. Provide detailed feedback on code quality

533```

534 484

535### Multi-file Skill485Run the visualization script from your project root:

536 486

487```bash

488python ~/.claude/skills/codebase-visualizer/scripts/visualize.py .

537```489```

538pdf-processing/

539├── SKILL.md

540├── FORMS.md

541├── REFERENCE.md

542└── scripts/

543 ├── fill_form.py

544 └── validate.py

545```

~~546~~

547**SKILL.md**:

548 490

549````yaml theme={null}491This creates `codebase-map.html` in the current directory and opens it in your default browser.

550name: pdf-processing

551description: Extract text, fill forms, merge PDFs. Use when working with PDF files, forms, or document extraction. Requires pypdf and pdfplumber packages.

552 492

553# PDF Processing493## What the visualization shows

554 494

555## Quick start495- **Collapsible directories**: Click folders to expand/collapse

~~556~~ 496- **File sizes**: Displayed next to each file

557Extract text:497- **Colors**: Different colors for different file types

558```python498- **Directory totals**: Shows aggregate size of each folder

559import pdfplumber499````

560with pdfplumber.open("doc.pdf") as pdf:

561 text = pdf.pages[0].extract_text()

562```

563 500

564For form filling, see [FORMS.md](FORMS.md).501Create `~/.claude/skills/codebase-visualizer/scripts/visualize.py`. This script scans a directory tree and generates a self-contained HTML file with:

565For detailed API reference, see [REFERENCE.md](REFERENCE.md).502

503* A **summary sidebar** showing file count, directory count, total size, and number of file types

504* A **bar chart** breaking down the codebase by file type (top 8 by size)

505* A **collapsible tree** where you can expand and collapse directories, with color-coded file type indicators

506

507The script requires Python but uses only built-in libraries, so there are no packages to install:

508

509```python expandable theme={null}

510#!/usr/bin/env python3

511"""Generate an interactive collapsible tree visualization of a codebase."""

512

513import json

514import sys

515import webbrowser

516from pathlib import Path

517from collections import Counter

518

519IGNORE = {'.git', 'node_modules', '__pycache__', '.venv', 'venv', 'dist', 'build'}

520

521def scan(path: Path, stats: dict) -> dict:

522 result = {"name": path.name, "children": [], "size": 0}

523 try:

524 for item in sorted(path.iterdir()):

525 if item.name in IGNORE or item.name.startswith('.'):

526 continue

527 if item.is_file():

528 size = item.stat().st_size

529 ext = item.suffix.lower() or '(no ext)'

530 result["children"].append({"name": item.name, "size": size, "ext": ext})

531 result["size"] += size

532 stats["files"] += 1

533 stats["extensions"][ext] += 1

534 stats["ext_sizes"][ext] += size

535 elif item.is_dir():

536 stats["dirs"] += 1

537 child = scan(item, stats)

538 if child["children"]:

539 result["children"].append(child)

540 result["size"] += child["size"]

541 except PermissionError:

542 pass

543 return result

544

545def generate_html(data: dict, stats: dict, output: Path) -> None:

546 ext_sizes = stats["ext_sizes"]

547 total_size = sum(ext_sizes.values()) or 1

548 sorted_exts = sorted(ext_sizes.items(), key=lambda x: -x[1])[:8]

549 colors = {

550 '.js': '#f7df1e', '.ts': '#3178c6', '.py': '#3776ab', '.go': '#00add8',

551 '.rs': '#dea584', '.rb': '#cc342d', '.css': '#264de4', '.html': '#e34c26',

552 '.json': '#6b7280', '.md': '#083fa1', '.yaml': '#cb171e', '.yml': '#cb171e',

553 '.mdx': '#083fa1', '.tsx': '#3178c6', '.jsx': '#61dafb', '.sh': '#4eaa25',

554 }

555 lang_bars = "".join(

556 f'<div class="bar-row"><span class="bar-label">{ext}</span>'

557 f'<div class="bar" style="width:{(size/total_size)*100}%;background:{colors.get(ext,"#6b7280")}"></div>'

558 f'<span class="bar-pct">{(size/total_size)*100:.1f}%</span></div>'

559 for ext, size in sorted_exts

560 )

561 def fmt(b):

562 if b < 1024: return f"{b} B"

563 if b < 1048576: return f"{b/1024:.1f} KB"

564 return f"{b/1048576:.1f} MB"

565

566 html = f'''<!DOCTYPE html>

567<html><head>

568 <meta charset="utf-8"><title>Codebase Explorer</title>

569 <style>

570 body {{ font: 14px/1.5 system-ui, sans-serif; margin: 0; background: #1a1a2e; color: #eee; }}

571 .container {{ display: flex; height: 100vh; }}

572 .sidebar {{ width: 280px; background: #252542; padding: 20px; border-right: 1px solid #3d3d5c; overflow-y: auto; flex-shrink: 0; }}

573 .main {{ flex: 1; padding: 20px; overflow-y: auto; }}

574 h1 {{ margin: 0 0 10px 0; font-size: 18px; }}

575 h2 {{ margin: 20px 0 10px 0; font-size: 14px; color: #888; text-transform: uppercase; }}

576 .stat {{ display: flex; justify-content: space-between; padding: 8px 0; border-bottom: 1px solid #3d3d5c; }}

577 .stat-value {{ font-weight: bold; }}

578 .bar-row {{ display: flex; align-items: center; margin: 6px 0; }}

579 .bar-label {{ width: 55px; font-size: 12px; color: #aaa; }}

580 .bar {{ height: 18px; border-radius: 3px; }}

581 .bar-pct {{ margin-left: 8px; font-size: 12px; color: #666; }}

582 .tree {{ list-style: none; padding-left: 20px; }}

583 details {{ cursor: pointer; }}

584 summary {{ padding: 4px 8px; border-radius: 4px; }}

585 summary:hover {{ background: #2d2d44; }}

586 .folder {{ color: #ffd700; }}

587 .file {{ display: flex; align-items: center; padding: 4px 8px; border-radius: 4px; }}

588 .file:hover {{ background: #2d2d44; }}

589 .size {{ color: #888; margin-left: auto; font-size: 12px; }}

590 .dot {{ width: 8px; height: 8px; border-radius: 50%; margin-right: 8px; }}

591 </style>

592</head><body>

593 <div class="container">

594 <div class="sidebar">

595 <h1>📊 Summary</h1>

596 <div class="stat"><span>Files</span><span class="stat-value">{stats["files"]:,}</span></div>

597 <div class="stat"><span>Directories</span><span class="stat-value">{stats["dirs"]:,}</span></div>

598 <div class="stat"><span>Total size</span><span class="stat-value">{fmt(data["size"])}</span></div>

599 <div class="stat"><span>File types</span><span class="stat-value">{len(stats["extensions"])}</span></div>

600 <h2>By file type</h2>

601 {lang_bars}

602 </div>

603 <div class="main">

604 <h1>📁 {data["name"]}</h1>

605 <ul class="tree" id="root"></ul>

606 </div>

607 </div>

608 <script>

609 const data = {json.dumps(data)};

610 const colors = {json.dumps(colors)};

611 function fmt(b) {{ if (b < 1024) return b + ' B'; if (b < 1048576) return (b/1024).toFixed(1) + ' KB'; return (b/1048576).toFixed(1) + ' MB'; }}

612 function render(node, parent) {{

613 if (node.children) {{

614 const det = document.createElement('details');

615 det.open = parent === document.getElementById('root');

616 det.innerHTML = `<summary><span class="folder">📁 ${{node.name}}</span><span class="size">${{fmt(node.size)}}</span></summary>`;

617 const ul = document.createElement('ul'); ul.className = 'tree';

618 node.children.sort((a,b) => (b.children?1:0)-(a.children?1:0) || a.name.localeCompare(b.name));

619 node.children.forEach(c => render(c, ul));

620 det.appendChild(ul);

621 const li = document.createElement('li'); li.appendChild(det); parent.appendChild(li);

622 }} else {{

623 const li = document.createElement('li'); li.className = 'file';

624 li.innerHTML = `<span class="dot" style="background:${{colors[node.ext]||'#6b7280'}}"></span>${{node.name}}<span class="size">${{fmt(node.size)}}</span>`;

625 parent.appendChild(li);

626 }}

627 }}

628 data.children.forEach(c => render(c, document.getElementById('root')));

629 </script>

630</body></html>'''

631 output.write_text(html)

632

633if __name__ == '__main__':

634 target = Path(sys.argv[1] if len(sys.argv) > 1 else '.').resolve()

635 stats = {"files": 0, "dirs": 0, "extensions": Counter(), "ext_sizes": Counter()}

636 data = scan(target, stats)

637 out = Path('codebase-map.html')

638 generate_html(data, stats, out)

639 print(f'Generated {out.absolute()}')

640 webbrowser.open(f'file://{out.absolute()}')

641```

642

643To test, open Claude Code in any project and ask "Visualize this codebase." Claude runs the script, generates `codebase-map.html`, and opens it in your browser.

644

645This pattern works for any visual output: dependency graphs, test coverage reports, API documentation, or database schema visualizations. The bundled script does the heavy lifting while Claude handles orchestration.

566 646

567## Requirements647## Troubleshooting

568 648

569Packages must be installed in your environment:649### Skill not triggering

570```bash

571pip install pypdf pdfplumber

572```

573````

574 650

575<Note>651If Claude doesn't use your skill when expected:

576 List required packages in the description. Packages must be installed in your environment before Claude can use them.

577</Note>

578 652

579Claude loads additional files only when needed.6531. Check the description includes keywords users would naturally say

6542. Verify the skill appears in `What skills are available?`

6553. Try rephrasing your request to match the description more closely

6564. Invoke it directly with `/skill-name` if the skill is user-invocable

580 657

581## Next steps658### Skill triggers too often

582 659

583<CardGroup cols={2}>660If Claude uses your skill when you don't want it:

584 <Card title="Authoring best practices" icon="lightbulb" href="https://docs.claude.com/en/docs/agents-and-tools/agent-skills/best-practices">

585 Write Skills that Claude can use effectively

586 </Card>

587 661

588 <Card title="Agent Skills overview" icon="book" href="https://docs.claude.com/en/docs/agents-and-tools/agent-skills/overview">6621. Make the description more specific

589 Learn how Skills work across Claude products6632. Add `disable-model-invocation: true` if you only want manual invocation

590 </Card>

591 664

592 <Card title="Use Skills in the Agent SDK" icon="cube" href="https://docs.claude.com/en/docs/agent-sdk/skills">665### Claude doesn't see all my skills

593 Use Skills programmatically with TypeScript and Python

594 </Card>

595 666

596 <Card title="Get started with Agent Skills" icon="rocket" href="https://docs.claude.com/en/docs/agents-and-tools/agent-skills/quickstart">667Skill descriptions are loaded into context so Claude knows what's available. If you have many skills, they may exceed the character budget. The budget scales dynamically at 2% of the context window, with a fallback of 16,000 characters. Run `/context` to check for a warning about excluded skills.

597 Create your first Skill

598 </Card>

599</CardGroup>

600 668

669To override the limit, set the `SLASH_COMMAND_TOOL_CHAR_BUDGET` environment variable.

601 670

671## Related resources

602 672

603> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt673* **[Subagents](/en/sub-agents)**: delegate tasks to specialized agents

674* **[Plugins](/en/plugins)**: package and distribute skills with other extensions

675* **[Hooks](/en/hooks)**: automate workflows around tool events

676* **[Memory](/en/memory)**: manage CLAUDE.md files for persistent context

677* **[Interactive mode](/en/interactive-mode#built-in-commands)**: built-in commands and shortcuts

678* **[Permissions](/en/permissions)**: control tool and skill access

slack.md +31 −6

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Claude Code in Slack5# Claude Code in Slack

2 6

3> Delegate coding tasks directly from your Slack workspace7> Delegate coding tasks directly from your Slack workspace

60 In Code + Chat mode, if Claude routes a message to Chat but you wanted a coding session, you can click "Retry as Code" to create a Claude Code session instead. Similarly, if it's routed to Code but you wanted a Chat session, you can choose that option in that thread.64 In Code + Chat mode, if Claude routes a message to Chat but you wanted a coding session, you can click "Retry as Code" to create a Claude Code session instead. Similarly, if it's routed to Code but you wanted a Chat session, you can choose that option in that thread.

61 </Note>65 </Note>

62 </Step>66 </Step>

68 <Step title="Add Claude to channels">

69 Claude is not automatically added to any channels after installation. To use Claude in a channel, invite it by typing `/invite @Claude` in that channel. Claude can only respond to @mentions in channels where it has been added.

70 </Step>

63</Steps>71</Steps>

64 72

65## How it works73## How it works

123| Repository Access | Users can only access repositories they've personally connected |131| Repository Access | Users can only access repositories they've personally connected |

124| Session History | Sessions appear in your Claude Code history on claude.ai/code |132| Session History | Sessions appear in your Claude Code history on claude.ai/code |

125 133

126### Workspace admin permissions134### Workspace-level access

135

136Slack workspace administrators control whether the Claude app is available in their workspace:

137

138| Control | Description |

139| :--------------------------- | :---------------------------------------------------------------------------------------------------------------- |

140| App installation | Workspace admins decide whether to install the Claude app from the Slack App Marketplace |

141| Enterprise Grid distribution | For Enterprise Grid organizations, organization admins can control which workspaces have access to the Claude app |

142| App removal | Removing the app from a workspace immediately revokes access for all users in that workspace |

143

144### Channel-based access control

127 145

128Slack workspace administrators control whether the Claude app can be installed in the workspace. Individual users then authenticate with their own Claude accounts to use the integration.146Claude is not automatically added to any channels after installation. Users must explicitly invite Claude to channels where they want to use it:

147

148* **Invite required**: Type `/invite @Claude` in any channel to add Claude to that channel

149* **Channel membership controls access**: Claude can only respond to @mentions in channels where it has been added

150* **Access gating through channels**: Admins can control who uses Claude Code by managing which channels Claude is invited to and who has access to those channels

151* **Private channel support**: Claude works in both public and private channels, giving teams flexibility in controlling visibility

152

153This channel-based model allows teams to restrict Claude Code usage to specific channels, providing an additional layer of access control beyond workspace-level permissions.

129 154

130## What's accessible where155## What's accessible where

131 156

133 158

134**On the web**: The complete Claude Code session with full conversation history, all code changes, file operations, and the ability to continue the session or create pull requests.159**On the web**: The complete Claude Code session with full conversation history, all code changes, file operations, and the ability to continue the session or create pull requests.

135 160

161For Enterprise and Teams accounts, sessions created from Claude in Slack are

162automatically visible to the organization. See [Claude Code on the Web sharing](/en/claude-code-on-the-web#sharing-sessions)

163for more details.

164

136## Best practices165## Best practices

137 166

138### Writing effective requests167### Writing effective requests

204 Get additional support233 Get additional support

205 </Card>234 </Card>

206</CardGroup>235</CardGroup>

~~207~~

~~208~~

~~209~~

210> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

slash-commands.md +0 −504 deleted

File DeletedView Diff

~~1# Slash commands~~

~~3> Control Claude's behavior during an interactive session with slash commands.~~

~~5## Built-in slash commands~~

~~7| Command | Purpose |~~

~~8| :------------------------ | :-------------------------------------------------------------------------------------------------------------------------- |~~

~~9| `/add-dir` | Add additional working directories |~~

~~10| `/agents` | Manage custom AI subagents for specialized tasks |~~

~~11| `/bashes` | List and manage background tasks |~~

~~12| `/bug` | Report bugs (sends conversation to Anthropic) |~~

~~13| `/clear` | Clear conversation history |~~

~~14| `/compact [instructions]` | Compact conversation with optional focus instructions |~~

~~15| `/config` | Open the Settings interface (Config tab) |~~

~~16| `/context` | Visualize current context usage as a colored grid |~~

~~17| `/cost` | Show token usage statistics. See [cost tracking guide](/en/costs#using-the-cost-command) for subscription-specific details. |~~

~~18| `/doctor` | Checks the health of your Claude Code installation |~~

~~19| `/exit` | Exit the REPL |~~

~~20| `/export [filename]` | Export the current conversation to a file or clipboard |~~

~~21| `/help` | Get usage help |~~

~~22| `/hooks` | Manage hook configurations for tool events |~~

~~23| `/ide` | Manage IDE integrations and show status |~~

~~24| `/init` | Initialize project with `CLAUDE.md` guide |~~

~~25| `/install-github-app` | Set up Claude GitHub Actions for a repository |~~

~~26| `/login` | Switch Anthropic accounts |~~

~~27| `/logout` | Sign out from your Anthropic account |~~

~~28| `/mcp` | Manage MCP server connections and OAuth authentication |~~

~~29| `/memory` | Edit `CLAUDE.md` memory files |~~

~~30| `/model` | Select or change the AI model |~~

~~31| `/output-style [style]` | Set the output style directly or from a selection menu |~~

~~32| `/permissions` | View or update [permissions](/en/iam#configuring-permissions) |~~

~~33| `/plugin` | Manage Claude Code plugins |~~

~~34| `/pr-comments` | View pull request comments |~~

~~35| `/privacy-settings` | View and update your privacy settings |~~

~~36| `/release-notes` | View release notes |~~

~~37| `/resume` | Resume a conversation |~~

~~38| `/review` | Request code review |~~

~~39| `/rewind` | Rewind the conversation and/or code |~~

~~40| `/sandbox` | Enable sandboxed bash tool with filesystem and network isolation for safer, more autonomous execution |~~

~~41| `/security-review` | Complete a security review of pending changes on the current branch |~~

~~42| `/stats` | Visualize daily usage, session history, streaks, and model preferences |~~

~~43| `/status` | Open the Settings interface (Status tab) showing version, model, account, and connectivity |~~

~~44| `/statusline` | Set up Claude Code's status line UI |~~

~~45| `/terminal-setup` | Install Shift+Enter key binding for newlines (iTerm2 and VSCode only) |~~

~~46| `/todos` | List current TODO items |~~

~~47| `/usage` | For subscription plans only: show plan usage limits and rate limit status |~~

~~48| `/vim` | Enter vim mode for alternating insert and command modes |~~

~~50## Custom slash commands~~

52Custom slash commands allow you to define frequently used prompts as Markdown files that Claude Code can execute. Commands are organized by scope (project-specific or personal) and support namespacing through directory structures.

~~54### Syntax~~

~~56```~~

~~57/<command-name> [arguments]~~

~~58```~~

~~60#### Parameters~~

~~62| Parameter | Description |~~

~~63| :--------------- | :---------------------------------------------------------------- |~~

~~64| `<command-name>` | Name derived from the Markdown filename (without `.md` extension) |~~

~~65| `[arguments]` | Optional arguments passed to the command |~~

~~67### Command types~~

~~69#### Project commands~~

~~71Commands stored in your repository and shared with your team. When listed in `/help`, these commands show "(project)" after their description.~~

~~73**Location**: `.claude/commands/`~~

~~75The following example creates the `/optimize` command:~~

~~77```bash theme={null}~~

~~78# Create a project command~~

~~79mkdir -p .claude/commands~~

~~80echo "Analyze this code for performance issues and suggest optimizations:" > .claude/commands/optimize.md~~

~~81```~~

~~83#### Personal commands~~

~~85Commands available across all your projects. When listed in `/help`, these commands show "(user)" after their description.~~

~~87**Location**: `~/.claude/commands/`~~

~~89The following example creates the `/security-review` command:~~

~~91```bash theme={null}~~

~~92# Create a personal command~~

~~93mkdir -p ~/.claude/commands~~

~~94echo "Review this code for security vulnerabilities:" > ~/.claude/commands/security-review.md~~

~~95```~~

~~97### Features~~

~~99#### Namespacing~~

~~100~~

101Use subdirectories to group related commands. Subdirectories appear in the command description but don't affect the command name.

~~102~~

103For example:

~~104~~

105* `.claude/commands/frontend/component.md` creates `/component` with description "(project:frontend)"

106* `~/.claude/commands/component.md` creates `/component` with description "(user)"

~~107~~

108If a project command and user command share the same name, the project command takes precedence and the user command is silently ignored. For example, if both `.claude/commands/deploy.md` and `~/.claude/commands/deploy.md` exist, `/deploy` runs the project version.

~~109~~

110Commands in different subdirectories can share names since the subdirectory appears in the description to distinguish them. For example, `.claude/commands/frontend/test.md` and `.claude/commands/backend/test.md` both create `/test`, but show as "(project:frontend)" and "(project:backend)" respectively.

~~111~~

112#### Arguments

~~113~~

114Pass dynamic values to commands using argument placeholders:

~~115~~

116##### All arguments with `$ARGUMENTS`

~~117~~

118The `$ARGUMENTS` placeholder captures all arguments passed to the command:

~~119~~

120```bash theme={null}

121# Command definition

122echo 'Fix issue #$ARGUMENTS following our coding standards' > .claude/commands/fix-issue.md

~~123~~

124# Usage

125> /fix-issue 123 high-priority

126# $ARGUMENTS becomes: "123 high-priority"

127```

~~128~~

129##### Individual arguments with `$1`, `$2`, etc.

~~130~~

131Access specific arguments individually using positional parameters (similar to shell scripts):

~~132~~

133```bash theme={null}

134# Command definition

135echo 'Review PR #$1 with priority $2 and assign to $3' > .claude/commands/review-pr.md

~~136~~

137# Usage

138> /review-pr 456 high alice

139# $1 becomes "456", $2 becomes "high", $3 becomes "alice"

140```

~~141~~

142Use positional arguments when you need to:

~~143~~

144* Access arguments individually in different parts of your command

145* Provide defaults for missing arguments

146* Build more structured commands with specific parameter roles

~~147~~

148#### Bash command execution

~~149~~

150Execute bash commands before the slash command runs using the `!` prefix. The output is included in the command context. You *must* include `allowed-tools` with the `Bash` tool, but you can choose the specific bash commands to allow.

~~151~~

152For example:

~~153~~

154```markdown theme={null}

155allowed-tools: Bash(git add:*), Bash(git status:*), Bash(git commit:*)

156description: Create a git commit

~~157~~

158## Context

~~159~~

160- Current git status: !`git status`

161- Current git diff (staged and unstaged changes): !`git diff HEAD`

162- Current branch: !`git branch --show-current`

163- Recent commits: !`git log --oneline -10`

~~164~~

165## Your task

~~166~~

167Based on the above changes, create a single git commit.

168```

~~169~~

170#### File references

~~171~~

172Include file contents in commands using the `@` prefix to [reference files](/en/common-workflows#reference-files-and-directories).

~~173~~

174For example:

~~175~~

176```markdown theme={null}

177# Reference a specific file

~~178~~

179Review the implementation in @src/utils/helpers.js

~~180~~

181# Reference multiple files

~~182~~

183Compare @src/old-version.js with @src/new-version.js

184```

~~185~~

186#### Thinking mode

~~187~~

188Slash commands can trigger extended thinking by including [extended thinking keywords](/en/common-workflows#use-extended-thinking).

~~189~~

190### Frontmatter

~~191~~

192Command files support frontmatter, useful for specifying metadata about the command:

~~193~~

194| Frontmatter | Purpose | Default |

195| :------------------------- | :------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | :---------------------------------- |

196| `allowed-tools` | List of tools the command can use | Inherits from the conversation |

198| `description` | Brief description of the command | Uses the first line from the prompt |

199| `model` | Specific model string (see [Models overview](https://docs.claude.com/en/docs/about-claude/models/overview)) | Inherits from the conversation |

200| `disable-model-invocation` | Whether to prevent `SlashCommand` tool from calling this command | false |

~~201~~

202For example:

~~203~~

204```markdown theme={null}

205allowed-tools: Bash(git add:*), Bash(git status:*), Bash(git commit:*)

206argument-hint: [message]

207description: Create a git commit

208model: claude-3-5-haiku-20241022

~~209~~

210Create a git commit with message: $ARGUMENTS

211```

~~212~~

213Example using positional arguments:

~~214~~

215```markdown theme={null}

216argument-hint: [pr-number] [priority] [assignee]

217description: Review pull request

~~218~~

219Review PR #$1 with priority $2 and assign to $3.

220Focus on security, performance, and code style.

221```

~~222~~

223## Plugin commands

~~224~~

225[Plugins](/en/plugins) can provide custom slash commands that integrate seamlessly with Claude Code. Plugin commands work exactly like user-defined commands but are distributed through [plugin marketplaces](/en/plugin-marketplaces).

~~226~~

227### How plugin commands work

~~228~~

229Plugin commands are:

~~230~~

231* **Namespaced**: Commands can use the format `/plugin-name:command-name` to avoid conflicts (plugin prefix is optional unless there are name collisions)

232* **Automatically available**: Once a plugin is installed and enabled, its commands appear in `/help`

233* **Fully integrated**: Support all command features (arguments, frontmatter, bash execution, file references)

~~234~~

235### Plugin command structure

~~236~~

237**Location**: `commands/` directory in plugin root

~~238~~

239**File format**: Markdown files with frontmatter

~~240~~

241**Basic command structure**:

~~242~~

243```markdown theme={null}

244description: Brief description of what the command does

~~245~~

246# Command Name

~~247~~

248Detailed instructions for Claude on how to execute this command.

249Include specific guidance on parameters, expected outcomes, and any special considerations.

250```

~~251~~

252**Advanced command features**:

~~253~~

254* **Arguments**: Use placeholders like `{arg1}` in command descriptions

255* **Subdirectories**: Organize commands in subdirectories for namespacing

256* **Bash integration**: Commands can execute shell scripts and programs

257* **File references**: Commands can reference and modify project files

~~258~~

259### Invocation patterns

~~260~~

261```shell Direct command (when no conflicts) theme={null}

262/command-name

263```

~~264~~

265```shell Plugin-prefixed (when needed for disambiguation) theme={null}

266/plugin-name:command-name

267```

~~268~~

269```shell With arguments (if command supports them) theme={null}

270/command-name arg1 arg2

271```

~~272~~

273## MCP slash commands

~~274~~

275MCP servers can expose prompts as slash commands that become available in Claude Code. These commands are dynamically discovered from connected MCP servers.

~~276~~

277### Command format

~~278~~

279MCP commands follow the pattern:

~~280~~

281```

282/mcp__<server-name>__<prompt-name> [arguments]

283```

~~284~~

285### Features

~~286~~

287#### Dynamic discovery

~~288~~

289MCP commands are automatically available when:

~~290~~

291* An MCP server is connected and active

292* The server exposes prompts through the MCP protocol

293* The prompts are successfully retrieved during connection

~~294~~

295#### Arguments

~~296~~

297MCP prompts can accept arguments defined by the server:

~~298~~

299```

300# Without arguments

301> /mcp__github__list_prs

~~302~~

303# With arguments

304> /mcp__github__pr_review 456

305> /mcp__jira__create_issue "Bug title" high

306```

~~307~~

308#### Naming conventions

~~309~~

310Server and prompt names are normalized:

~~311~~

312* Spaces and special characters become underscores

313* Names are lowercase for consistency

~~314~~

315### Managing MCP connections

~~316~~

317Use the `/mcp` command to:

~~318~~

319* View all configured MCP servers

320* Check connection status

321* Authenticate with OAuth-enabled servers

322* Clear authentication tokens

323* View available tools and prompts from each server

~~324~~

325### MCP permissions and wildcards

~~326~~

327Wildcards aren't supported in [permissions for MCP tools](/en/iam#tool-specific-permission-rules).

~~328~~

329To approve all tools from an MCP server, use the server name alone, without wildcards:

~~330~~

331* `mcp__github` (approves all GitHub tools)

~~332~~

333To approve specific tools, list each one explicitly:

~~334~~

335* `mcp__github__get_issue`

336* `mcp__github__list_issues`

~~337~~

338## `SlashCommand` tool

~~339~~

340The `SlashCommand` tool allows Claude to execute [custom slash commands](/en/slash-commands#custom-slash-commands) programmatically

341during a conversation. This gives Claude the ability to invoke custom commands

342on your behalf when appropriate.

~~343~~

344To encourage Claude to use the `SlashCommand` tool, reference the command by name, including the slash, in your prompts or `CLAUDE.md` file. For example:

~~345~~

346```

347> Run /write-unit-test when you are about to start writing tests.

348```

~~349~~

350This tool puts each available custom slash command's metadata into context up to the character budget limit. You can use `/context` to monitor token usage and follow the operations below to manage context.

~~351~~

352### `SlashCommand` tool supported commands

~~353~~

354`SlashCommand` tool only supports custom slash commands that:

~~355~~

356* Are user-defined. Built-in commands like `/compact` and `/init` are *not* supported.

357* Have the `description` frontmatter field populated. The description is used in the context.

~~358~~

359For Claude Code versions >= 1.0.124, you can see which custom slash commands

360`SlashCommand` tool can invoke by running `claude --debug` and triggering a query.

~~361~~

362### Disable `SlashCommand` tool

~~363~~

364To prevent Claude from executing any slash commands via the tool:

~~365~~

366```bash theme={null}

367/permissions

368# Add to deny rules: SlashCommand

369```

~~370~~

371This also removes the SlashCommand tool and command descriptions from context.

~~372~~

373### Disable specific commands only

~~374~~

375To prevent a specific slash command from becoming available, add

376`disable-model-invocation: true` to the slash command's frontmatter.

~~377~~

378This also removes the command's metadata from context.

~~379~~

380### `SlashCommand` permission rules

~~381~~

382The permission rules support:

~~383~~

384* **Exact match**: `SlashCommand:/commit` (allows only `/commit` with no arguments)

385* **Prefix match**: `SlashCommand:/review-pr:*` (allows `/review-pr` with any arguments)

~~386~~

387### Character budget limit

~~388~~

389The `SlashCommand` tool includes a character budget to limit the size of command

390descriptions shown to Claude. This prevents token overflow when many commands

391are available.

~~392~~

393The budget includes each custom slash command's name, arguments, and description.

~~394~~

395* **Default limit**: 15,000 characters

396* **Custom limit**: Set via `SLASH_COMMAND_TOOL_CHAR_BUDGET` environment variable

~~397~~

398When the character budget is exceeded, Claude sees only a subset of the available commands. In `/context`, a warning shows "M of N commands".

~~399~~

400## Skills vs slash commands

~~401~~

402**Slash commands** and **Agent Skills** serve different purposes in Claude Code:

~~403~~

404### Use slash commands for

~~405~~

406**Quick, frequently used prompts**:

~~407~~

408* Simple prompt snippets you use often

409* Quick reminders or templates

410* Frequently used instructions that fit in one file

~~411~~

412**Examples**:

~~413~~

414* `/review` → "Review this code for bugs and suggest improvements"

415* `/explain` → "Explain this code in simple terms"

416* `/optimize` → "Analyze this code for performance issues"

~~417~~

418### Use Skills for

~~419~~

420**Comprehensive capabilities with structure**:

~~421~~

422* Complex workflows with multiple steps

423* Capabilities requiring scripts or utilities

424* Knowledge organized across multiple files

425* Team workflows you want to standardize

~~426~~

427**Examples**:

~~428~~

429* PDF processing Skill with form-filling scripts and validation

430* Data analysis Skill with reference docs for different data types

431* Documentation Skill with style guides and templates

~~432~~

433### Key differences

~~434~~

435| Aspect | Slash Commands | Agent Skills |

436| -------------- | -------------------------------- | ----------------------------------- |

437| **Complexity** | Simple prompts | Complex capabilities |

438| **Structure** | Single .md file | Directory with SKILL.md + resources |

439| **Discovery** | Explicit invocation (`/command`) | Automatic (based on context) |

440| **Files** | One file only | Multiple files, scripts, templates |

441| **Scope** | Project or personal | Project or personal |

442| **Sharing** | Via git | Via git |

~~443~~

444### Example comparison

~~445~~

446**As a slash command**:

~~447~~

448```markdown theme={null}

449# .claude/commands/review.md

450Review this code for:

451- Security vulnerabilities

452- Performance issues

453- Code style violations

454```

~~455~~

456Usage: `/review` (manual invocation)

~~457~~

458**As a Skill**:

~~459~~

460```

461.claude/skills/code-review/

462├── SKILL.md (overview and workflows)

463├── SECURITY.md (security checklist)

464├── PERFORMANCE.md (performance patterns)

465├── STYLE.md (style guide reference)

466└── scripts/

467 └── run-linters.sh

468```

~~469~~

470Usage: "Can you review this code?" (automatic discovery)

~~471~~

472The Skill provides richer context, validation scripts, and organized reference material.

~~473~~

474### When to use each

~~475~~

476**Use slash commands**:

~~477~~

478* You invoke the same prompt repeatedly

479* The prompt fits in a single file

480* You want explicit control over when it runs

~~481~~

482**Use Skills**:

~~483~~

484* Claude should discover the capability automatically

485* Multiple files or scripts are needed

486* Complex workflows with validation steps

487* Team needs standardized, detailed guidance

~~488~~

489Both slash commands and Skills can coexist. Use the approach that fits your needs.

~~490~~

491Learn more about [Agent Skills](/en/skills).

~~492~~

493## See also

~~494~~

495* [Plugins](/en/plugins) - Extend Claude Code with custom commands through plugins

496* [Identity and Access Management](/en/iam) - Complete guide to permissions, including MCP tool permissions

497* [Interactive mode](/en/interactive-mode) - Shortcuts, input modes, and interactive features

498* [CLI reference](/en/cli-reference) - Command-line flags and options

499* [Settings](/en/settings) - Configuration options

500* [Memory management](/en/memory) - Managing Claude's memory across sessions

~~501~~

~~502~~

~~503~~

504> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

statusline.md +752 −153

Details

~~1# Status line configuration~~1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

2 4

~~3> Create a custom status line for Claude Code to display contextual information~~5# Customize your status line

4 6

~~5Make Claude Code your own with a custom status line that displays at the bottom of the Claude Code interface, similar to how terminal prompts (PS1) work in shells like Oh-my-zsh.~~7> Configure a custom status bar to monitor context window usage, costs, and git status in Claude Code

6 8

~~7## Create a custom status line~~9The status line is a customizable bar at the bottom of Claude Code that runs any shell script you configure. It receives JSON session data on stdin and displays whatever your script prints, giving you a persistent, at-a-glance view of context usage, costs, git status, or anything else you want to track.

8 10

~~9You can either:~~11Status lines are useful when you:

10 12

11* Run `/statusline` to ask Claude Code to help you set up a custom status line. By default, it will try to reproduce your terminal's prompt, but you can provide additional instructions about the behavior you want to Claude Code, such as `/statusline show the model name in orange`13* Want to monitor context window usage as you work

14* Need to track session costs

15* Work across multiple sessions and need to distinguish them

16* Want git branch and status always visible

12 17

~~13* Directly add a `statusLine` command to your `.claude/settings.json`:~~18Here's an example of a [multi-line status line](#display-multiple-lines) that displays git info on the first line and a color-coded context bar on the second.

20<Frame>

21 <img src="https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-multiline.png?fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=60f11387658acc9ff75158ae85f2ac87" alt="A multi-line status line showing model name, directory, git branch on the first line, and a context usage progress bar with cost and duration on the second line" data-og-width="776" width="776" data-og-height="212" height="212" data-path="images/statusline-multiline.png" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-multiline.png?w=280&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=2e448b44c332620e6c9c2be4ded992e5 280w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-multiline.png?w=560&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=f796af2db9c68ab2ddbc5136840b9551 560w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-multiline.png?w=840&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=d29c13d6164773198a0b2c47b31f6c09 840w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-multiline.png?w=1100&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=d7720e5f51310185c0c02152f6c10d8b 1100w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-multiline.png?w=1650&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=b4e008cde27990a8d5783e41e5b93246 1650w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-multiline.png?w=2500&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=40ab24813303dc2e4c09f2675f3faf6e 2500w" />

22</Frame>

24This page walks through [setting up a basic status line](#set-up-a-status-line), explains [how the data flows](#how-status-lines-work) from Claude Code to your script, lists [all the fields you can display](#available-data), and provides [ready-to-use examples](#examples) for common patterns like git status, cost tracking, and progress bars.

26## Set up a status line

28Use the [`/statusline` command](#use-the-statusline-command) to have Claude Code generate a script for you, or [manually create a script](#manually-configure-a-status-line) and add it to your settings.

30### Use the /statusline command

32The `/statusline` command accepts natural language instructions describing what you want displayed. Claude Code generates a script file in `~/.claude/` and updates your settings automatically:

34```

35/statusline show model name and context percentage with a progress bar

36```

38### Manually configure a status line

40Add a `statusLine` field to your user settings (`~/.claude/settings.json`, where `~` is your home directory) or [project settings](/en/settings#settings-files). Set `type` to `"command"` and point `command` to a script path or an inline shell command. For a full walkthrough of creating a script, see [Build a status line step by step](#build-a-status-line-step-by-step).

14 41

15```json theme={null}42```json theme={null}

16{43{

17 "statusLine": {44 "statusLine": {

18 "type": "command",45 "type": "command",

19 "command": "~/.claude/statusline.sh",46 "command": "~/.claude/statusline.sh",

~~20 "padding": 0 // Optional: set to 0 to let status line go to edge~~47 "padding": 2

48 }

49}

50```

52The `command` field runs in a shell, so you can also use inline commands instead of a script file. This example uses `jq` to parse the JSON input and display the model name and context percentage:

54```json theme={null}

55{

56 "statusLine": {

57 "type": "command",

58 "command": "jq -r '\"[\\(.model.display_name)] \\(.context_window.used_percentage // 0)% context\"'"

21 }59 }

22}60}

23```61```

24 62

~~25## How it Works~~63The optional `padding` field adds extra horizontal spacing (in characters) to the status line content. Defaults to `0`. This padding is in addition to the interface's built-in spacing, so it controls relative indentation rather than absolute distance from the terminal edge.

26 64

~~27* The status line is updated when the conversation messages update~~65### Disable the status line

~~28* Updates run at most every 300 ms~~

~~29* The first line of stdout from your command becomes the status line text~~

~~30* ANSI color codes are supported for styling your status line~~

~~31* Claude Code passes contextual information about the current session (model, directories, etc.) as JSON to your script via stdin~~

32 66

~~33## JSON Input Structure~~67Run `/statusline` and ask it to remove or clear your status line (e.g., `/statusline delete`, `/statusline clear`, `/statusline remove it`). You can also manually delete the `statusLine` field from your settings.json.

34 68

~~35Your status line command receives structured data via stdin in JSON format:~~69## Build a status line step by step

36 70

~~37```json theme={null}~~71This walkthrough shows what's happening under the hood by manually creating a status line that displays the current model, working directory, and context window usage percentage.

~~38{~~72

~~39 "hook_event_name": "Status",~~73<Note>Running [`/statusline`](#use-the-statusline-command) with a description of what you want configures all of this for you automatically.</Note>

~~40 "session_id": "abc123...",~~74

~~41 "transcript_path": "/path/to/transcript.json",~~75These examples use Bash scripts, which work on macOS and Linux. On Windows, you can run Bash scripts through [WSL (Windows Subsystem for Linux)](https://learn.microsoft.com/en-us/windows/wsl/install) or rewrite them in PowerShell.

77<Frame>

78 <img src="https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-quickstart.png?fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=696445e59ca0059213250651ad23db6b" alt="A status line showing model name, directory, and context percentage" data-og-width="726" width="726" data-og-height="164" height="164" data-path="images/statusline-quickstart.png" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-quickstart.png?w=280&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=728c4bd06c8559cb46ddffffad983373 280w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-quickstart.png?w=560&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=f9d28e0f8f48f695167dd1d632a6cf4f 560w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-quickstart.png?w=840&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=57a2803a18cafe8cf1aa05619444f20c 840w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-quickstart.png?w=1100&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=52cdd52865842f0cda24489dd5310d3b 1100w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-quickstart.png?w=1650&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=f8876ea1f72bf40bd0aeec483ee20164 1650w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-quickstart.png?w=2500&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=6b1524305c7c71122cde65d0c3822374 2500w" />

79</Frame>

81<Steps>

82 <Step title="Create a script that reads JSON and prints output">

83 Claude Code sends JSON data to your script via stdin. This script uses [`jq`](https://jqlang.github.io/jq/), a command-line JSON parser you may need to install, to extract the model name, directory, and context percentage, then prints a formatted line.

85 Save this to `~/.claude/statusline.sh` (where `~` is your home directory, such as `/Users/username` on macOS or `/home/username` on Linux):

87 ```bash theme={null}

88 #!/bin/bash

89 # Read JSON data that Claude Code sends to stdin

90 input=$(cat)

92 # Extract fields using jq

93 MODEL=$(echo "$input" | jq -r '.model.display_name')

94 DIR=$(echo "$input" | jq -r '.workspace.current_dir')

95 # The "// 0" provides a fallback if the field is null

96 PCT=$(echo "$input" | jq -r '.context_window.used_percentage // 0' | cut -d. -f1)

98 # Output the status line - ${DIR##*/} extracts just the folder name

99 echo "[$MODEL] 📁 ${DIR##*/} | ${PCT}% context"

100 ```

101 </Step>

102

103 <Step title="Make it executable">

104 Mark the script as executable so your shell can run it:

105

106 ```bash theme={null}

107 chmod +x ~/.claude/statusline.sh

108 ```

109 </Step>

110

111 <Step title="Add to settings">

112 Tell Claude Code to run your script as the status line. Add this configuration to `~/.claude/settings.json`, which sets `type` to `"command"` (meaning "run this shell command") and points `command` to your script:

113

114 ```json theme={null}

115 {

116 "statusLine": {

117 "type": "command",

118 "command": "~/.claude/statusline.sh"

119 }

120 }

121 ```

122

123 Your status line appears at the bottom of the interface. Settings reload automatically, but changes won't appear until your next interaction with Claude Code.

124 </Step>

125</Steps>

126

127## How status lines work

128

129Claude Code runs your script and pipes [JSON session data](#available-data) to it via stdin. Your script reads the JSON, extracts what it needs, and prints text to stdout. Claude Code displays whatever your script prints.

130

131**When it updates**

132

133Your script runs after each new assistant message, when the permission mode changes, or when vim mode toggles. Updates are debounced at 300ms, meaning rapid changes batch together and your script runs once things settle. If a new update triggers while your script is still running, the in-flight execution is cancelled. If you edit your script, the changes won't appear until your next interaction with Claude Code triggers an update.

134

135**What your script can output**

136

137* **Multiple lines**: each `echo` or `print` statement displays as a separate row. See the [multi-line example](#display-multiple-lines).

138* **Colors**: use [ANSI escape codes](https://en.wikipedia.org/wiki/ANSI_escape_code#Colors) like `\033[32m` for green (terminal must support them). See the [git status example](#git-status-with-colors).

139* **Links**: use [OSC 8 escape sequences](https://en.wikipedia.org/wiki/ANSI_escape_code#OSC) to make text clickable (Cmd+click on macOS, Ctrl+click on Windows/Linux). Requires a terminal that supports hyperlinks like iTerm2, Kitty, or WezTerm. See the [clickable links example](#clickable-links).

140

141<Note>The status line runs locally and does not consume API tokens. It temporarily hides during certain UI interactions, including autocomplete suggestions, the help menu, and permission prompts.</Note>

142

143## Available data

144

145Claude Code sends the following JSON fields to your script via stdin:

146

147| Field | Description |

148| ------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |

149| `model.id`, `model.display_name` | Current model identifier and display name |

150| `cwd`, `workspace.current_dir` | Current working directory. Both fields contain the same value; `workspace.current_dir` is preferred for consistency with `workspace.project_dir`. |

151| `workspace.project_dir` | Directory where Claude Code was launched, which may differ from `cwd` if the working directory changes during a session |

152| `cost.total_cost_usd` | Total session cost in USD |

153| `cost.total_duration_ms` | Total wall-clock time since the session started, in milliseconds |

154| `cost.total_api_duration_ms` | Total time spent waiting for API responses in milliseconds |

155| `cost.total_lines_added`, `cost.total_lines_removed` | Lines of code changed |

156| `context_window.total_input_tokens`, `context_window.total_output_tokens` | Cumulative token counts across the session |

157| `context_window.context_window_size` | Maximum context window size in tokens. 200000 by default, or 1000000 for models with extended context. |

158| `context_window.used_percentage` | Pre-calculated percentage of context window used |

159| `context_window.remaining_percentage` | Pre-calculated percentage of context window remaining |

160| `context_window.current_usage` | Token counts from the last API call, described in [context window fields](#context-window-fields) |

161| `exceeds_200k_tokens` | Whether the total token count (input, cache, and output tokens combined) from the most recent API response exceeds 200k. This is a fixed threshold regardless of actual context window size. |

162| `session_id` | Unique session identifier |

163| `transcript_path` | Path to conversation transcript file |

164| `version` | Claude Code version |

165| `output_style.name` | Name of the current output style |

166| `vim.mode` | Current vim mode (`NORMAL` or `INSERT`) when [vim mode](/en/interactive-mode#vim-editor-mode) is enabled |

167| `agent.name` | Agent name when running with the `--agent` flag or agent settings configured |

168

169<Accordion title="Full JSON schema">

170 Your status line command receives this JSON structure via stdin:

171

172 ```json theme={null}

173 {

42 "cwd": "/current/working/directory",174 "cwd": "/current/working/directory",

175 "session_id": "abc123...",

176 "transcript_path": "/path/to/transcript.jsonl",

43 "model": {177 "model": {

~~44 "id": "claude-opus-4-1",~~178 "id": "claude-opus-4-6",

45 "display_name": "Opus"179 "display_name": "Opus"

46 },180 },

47 "workspace": {181 "workspace": {

63 "total_input_tokens": 15234,197 "total_input_tokens": 15234,

64 "total_output_tokens": 4521,198 "total_output_tokens": 4521,

65 "context_window_size": 200000,199 "context_window_size": 200000,

200 "used_percentage": 8,

201 "remaining_percentage": 92,

66 "current_usage": {202 "current_usage": {

67 "input_tokens": 8500,203 "input_tokens": 8500,

68 "output_tokens": 1200,204 "output_tokens": 1200,

69 "cache_creation_input_tokens": 5000,205 "cache_creation_input_tokens": 5000,

70 "cache_read_input_tokens": 2000206 "cache_read_input_tokens": 2000

71 }207 }

208 },

209 "exceeds_200k_tokens": false,

210 "vim": {

211 "mode": "NORMAL"

212 },

213 "agent": {

214 "name": "security-reviewer"

72 }215 }

~~73}~~216 }

~~74```~~217 ```

75 218

~~76## Example Scripts~~219 **Fields that may be absent** (not present in JSON):

77 220

~~78### Simple Status Line~~221 * `vim`: appears only when vim mode is enabled

222 * `agent`: appears only when running with the `--agent` flag or agent settings configured

79 223

~~80```bash theme={null}~~224 **Fields that may be `null`**:

~~81#!/bin/bash~~

~~82# Read JSON input from stdin~~

~~83input=$(cat)~~

84 225

~~85# Extract values using jq~~226 * `context_window.current_usage`: `null` before the first API call in a session

~~86MODEL_DISPLAY=$(echo "$input" | jq -r '.model.display_name')~~227 * `context_window.used_percentage`, `context_window.remaining_percentage`: may be `null` early in the session

~~87CURRENT_DIR=$(echo "$input" | jq -r '.workspace.current_dir')~~

88 228

~~89echo "[$MODEL_DISPLAY] 📁 ${CURRENT_DIR##*/}"~~229 Handle missing fields with conditional access and null values with fallback defaults in your scripts.

~~90```~~230</Accordion>

231

232### Context window fields

233

234The `context_window` object provides two ways to track context usage:

235

236* **Cumulative totals** (`total_input_tokens`, `total_output_tokens`): sum of all tokens across the entire session, useful for tracking total consumption

237* **Current usage** (`current_usage`): token counts from the most recent API call, use this for accurate context percentage since it reflects the actual context state

238

239The `current_usage` object contains:

240

241* `input_tokens`: input tokens in current context

242* `output_tokens`: output tokens generated

243* `cache_creation_input_tokens`: tokens written to cache

244* `cache_read_input_tokens`: tokens read from cache

245

246The `used_percentage` field is calculated from input tokens only: `input_tokens + cache_creation_input_tokens + cache_read_input_tokens`. It does not include `output_tokens`.

247

248If you calculate context percentage manually from `current_usage`, use the same input-only formula to match `used_percentage`.

249

250The `current_usage` object is `null` before the first API call in a session.

251

252## Examples

253

254These examples show common status line patterns. To use any example:

255

2561. Save the script to a file like `~/.claude/statusline.sh` (or `.py`/`.js`)

2572. Make it executable: `chmod +x ~/.claude/statusline.sh`

2583. Add the path to your [settings](#manually-configure-a-status-line)

259

260The Bash examples use [`jq`](https://jqlang.github.io/jq/) to parse JSON. Python and Node.js have built-in JSON parsing.

261

262### Context window usage

263

264Display the current model and context window usage with a visual progress bar. Each script reads JSON from stdin, extracts the `used_percentage` field, and builds a 10-character bar where filled blocks (▓) represent usage:

265

266<Frame>

267 <img src="https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-context-window-usage.png?fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=15b58ab3602f036939145dde3165c6f7" alt="A status line showing model name and a progress bar with percentage" data-og-width="448" width="448" data-og-height="152" height="152" data-path="images/statusline-context-window-usage.png" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-context-window-usage.png?w=280&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=a18fecd31f06b16e984b1ab3310acbc0 280w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-context-window-usage.png?w=560&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=2f4b3caff156efede2ded995dbaf167f 560w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-context-window-usage.png?w=840&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=8f6b8c7e7d3a999c570e96ad2ea13d5a 840w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-context-window-usage.png?w=1100&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=d9334e6a08e6f11a253733c8592774a9 1100w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-context-window-usage.png?w=1650&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=e79490da8f62952e4d92837c408e63dc 1650w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-context-window-usage.png?w=2500&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=6f7c9ef8e629a794969c54b24163f92d 2500w" />

268</Frame>

269

270<CodeGroup>

271 ```bash Bash theme={null}

272 #!/bin/bash

273 # Read all of stdin into a variable

274 input=$(cat)

275

276 # Extract fields with jq, "// 0" provides fallback for null

277 MODEL=$(echo "$input" | jq -r '.model.display_name')

278 PCT=$(echo "$input" | jq -r '.context_window.used_percentage // 0' | cut -d. -f1)

279

280 # Build progress bar: printf creates spaces, tr replaces with blocks

281 BAR_WIDTH=10

282 FILLED=$((PCT * BAR_WIDTH / 100))

283 EMPTY=$((BAR_WIDTH - FILLED))

284 BAR=""

285 [ "$FILLED" -gt 0 ] && BAR=$(printf "%${FILLED}s" | tr ' ' '▓')

286 [ "$EMPTY" -gt 0 ] && BAR="${BAR}$(printf "%${EMPTY}s" | tr ' ' '░')"

287

288 echo "[$MODEL] $BAR $PCT%"

289 ```

91 290

~~92### Git-Aware Status Line~~291 ```python Python theme={null}

292 #!/usr/bin/env python3

293 import json, sys

93 294

~~94```bash theme={null}~~295 # json.load reads and parses stdin in one step

~~95#!/bin/bash~~296 data = json.load(sys.stdin)

~~96# Read JSON input from stdin~~297 model = data['model']['display_name']

~~97input=$(cat)~~298 # "or 0" handles null values

299 pct = int(data.get('context_window', {}).get('used_percentage', 0) or 0)

98 300

~~99# Extract values using jq~~301 # String multiplication builds the bar

100MODEL_DISPLAY=$(echo "$input" | jq -r '.model.display_name')302 filled = pct * 10 // 100

101CURRENT_DIR=$(echo "$input" | jq -r '.workspace.current_dir')303 bar = '▓' * filled + '░' * (10 - filled)

102 304

103# Show git branch if in a git repo305 print(f"[{model}] {bar} {pct}%")

104GIT_BRANCH=""306 ```

105if git rev-parse --git-dir > /dev/null 2>&1; then307

308 ```javascript Node.js theme={null}

309 #!/usr/bin/env node

310 // Node.js reads stdin asynchronously with events

311 let input = '';

312 process.stdin.on('data', chunk => input += chunk);

313 process.stdin.on('end', () => {

314 const data = JSON.parse(input);

315 const model = data.model.display_name;

316 // Optional chaining (?.) safely handles null fields

317 const pct = Math.floor(data.context_window?.used_percentage || 0);

318

319 // String.repeat() builds the bar

320 const filled = Math.floor(pct * 10 / 100);

321 const bar = '▓'.repeat(filled) + '░'.repeat(10 - filled);

322

323 console.log(`[${model}] ${bar} ${pct}%`);

324 });

325 ```

326</CodeGroup>

327

328### Git status with colors

329

330Show git branch with color-coded indicators for staged and modified files. This script uses [ANSI escape codes](https://en.wikipedia.org/wiki/ANSI_escape_code#Colors) for terminal colors: `\033[32m` is green, `\033[33m` is yellow, and `\033[0m` resets to default.

331

332<Frame>

333 <img src="https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-git-context.png?fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=e656f34f90d1d9a1d0e220988914345f" alt="A status line showing model, directory, git branch, and colored indicators for staged and modified files" data-og-width="742" width="742" data-og-height="178" height="178" data-path="images/statusline-git-context.png" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-git-context.png?w=280&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=c1bced5f46afdc9aae549702591f8457 280w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-git-context.png?w=560&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=debe46a7a888234ec692751243bba492 560w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-git-context.png?w=840&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=3a069d5c8b0395908e42f0e295fd4854 840w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-git-context.png?w=1100&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=26aff0978865756d5ea299a22e5e9afd 1100w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-git-context.png?w=1650&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=d5ac1d59881e6f2032af053557dc4590 1650w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-git-context.png?w=2500&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=46febbf34b0ee646502d095433132709 2500w" />

334</Frame>

335

336Each script checks if the current directory is a git repository, counts staged and modified files, and displays color-coded indicators:

337

338<CodeGroup>

339 ```bash Bash theme={null}

340 #!/bin/bash

341 input=$(cat)

342

343 MODEL=$(echo "$input" | jq -r '.model.display_name')

344 DIR=$(echo "$input" | jq -r '.workspace.current_dir')

345

346 GREEN='\033[32m'

347 YELLOW='\033[33m'

348 RESET='\033[0m'

349

350 if git rev-parse --git-dir > /dev/null 2>&1; then

106 BRANCH=$(git branch --show-current 2>/dev/null)351 BRANCH=$(git branch --show-current 2>/dev/null)

107 if [ -n "$BRANCH" ]; then352 STAGED=$(git diff --cached --numstat 2>/dev/null | wc -l | tr -d ' ')

108 GIT_BRANCH=" | 🌿 $BRANCH"353 MODIFIED=$(git diff --numstat 2>/dev/null | wc -l | tr -d ' ')

109 fi

110fi

111 354

112echo "[$MODEL_DISPLAY] 📁 ${CURRENT_DIR##*/}$GIT_BRANCH"355 GIT_STATUS=""

113```356 [ "$STAGED" -gt 0 ] && GIT_STATUS="${GREEN}+${STAGED}${RESET}"

357 [ "$MODIFIED" -gt 0 ] && GIT_STATUS="${GIT_STATUS}${YELLOW}~${MODIFIED}${RESET}"

114 358

115### Python Example359 echo -e "[$MODEL] 📁 ${DIR##*/} | 🌿 $BRANCH $GIT_STATUS"

360 else

361 echo "[$MODEL] 📁 ${DIR##*/}"

362 fi

363 ```

116 364

117```python theme={null}365 ```python Python theme={null}

118#!/usr/bin/env python3366 #!/usr/bin/env python3

119import json367 import json, sys, subprocess, os

120import sys

121import os

122 368

123# Read JSON from stdin369 data = json.load(sys.stdin)

124data = json.load(sys.stdin)370 model = data['model']['display_name']

371 directory = os.path.basename(data['workspace']['current_dir'])

125 372

126# Extract values373 GREEN, YELLOW, RESET = '\033[32m', '\033[33m', '\033[0m'

127model = data['model']['display_name']

128current_dir = os.path.basename(data['workspace']['current_dir'])

129 374

130# Check for git branch

131git_branch = ""

132if os.path.exists('.git'):

133 try:375 try:

134 with open('.git/HEAD', 'r') as f:376 subprocess.check_output(['git', 'rev-parse', '--git-dir'], stderr=subprocess.DEVNULL)

135 ref = f.read().strip()377 branch = subprocess.check_output(['git', 'branch', '--show-current'], text=True).strip()

136 if ref.startswith('ref: refs/heads/'):378 staged_output = subprocess.check_output(['git', 'diff', '--cached', '--numstat'], text=True).strip()

137 git_branch = f" | 🌿 {ref.replace('ref: refs/heads/', '')}"379 modified_output = subprocess.check_output(['git', 'diff', '--numstat'], text=True).strip()

380 staged = len(staged_output.split('\n')) if staged_output else 0

381 modified = len(modified_output.split('\n')) if modified_output else 0

382

383 git_status = f"{GREEN}+{staged}{RESET}" if staged else ""

384 git_status += f"{YELLOW}~{modified}{RESET}" if modified else ""

385

386 print(f"[{model}] 📁 {directory} | 🌿 {branch} {git_status}")

138 except:387 except:

139 pass388 print(f"[{model}] 📁 {directory}")

389 ```

140 390

141print(f"[{model}] 📁 {current_dir}{git_branch}")391 ```javascript Node.js theme={null}

142```392 #!/usr/bin/env node

393 const { execSync } = require('child_process');

394 const path = require('path');

395

396 let input = '';

397 process.stdin.on('data', chunk => input += chunk);

398 process.stdin.on('end', () => {

399 const data = JSON.parse(input);

400 const model = data.model.display_name;

401 const dir = path.basename(data.workspace.current_dir);

143 402

144### Node.js Example403 const GREEN = '\x1b[32m', YELLOW = '\x1b[33m', RESET = '\x1b[0m';

145 404

146```javascript theme={null}405 try {

147#!/usr/bin/env node406 execSync('git rev-parse --git-dir', { stdio: 'ignore' });

407 const branch = execSync('git branch --show-current', { encoding: 'utf8' }).trim();

408 const staged = execSync('git diff --cached --numstat', { encoding: 'utf8' }).trim().split('\n').filter(Boolean).length;

409 const modified = execSync('git diff --numstat', { encoding: 'utf8' }).trim().split('\n').filter(Boolean).length;

148 410

149const fs = require('fs');411 let gitStatus = staged ? `${GREEN}+${staged}${RESET}` : '';

150const path = require('path');412 gitStatus += modified ? `${YELLOW}~${modified}${RESET}` : '';

151 413

152// Read JSON from stdin414 console.log(`[${model}] 📁 ${dir} | 🌿 ${branch} ${gitStatus}`);

153let input = '';415 } catch {

154process.stdin.on('data', chunk => input += chunk);416 console.log(`[${model}] 📁 ${dir}`);

155process.stdin.on('end', () => {417 }

418 });

419 ```

420</CodeGroup>

421

422### Cost and duration tracking

423

424Track your session's API costs and elapsed time. The `cost.total_cost_usd` field accumulates the cost of all API calls in the current session. The `cost.total_duration_ms` field measures total elapsed time since the session started, while `cost.total_api_duration_ms` tracks only the time spent waiting for API responses.

425

426Each script formats cost as currency and converts milliseconds to minutes and seconds:

427

428<Frame>

429 <img src="https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-cost-tracking.png?fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=e3444a51fe6f3440c134bd5f1f08ad29" alt="A status line showing model name, session cost, and duration" data-og-width="588" width="588" data-og-height="180" height="180" data-path="images/statusline-cost-tracking.png" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-cost-tracking.png?w=280&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=b1d35fa8acd792f559b6b1662ed10204 280w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-cost-tracking.png?w=560&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=a3ed4330c3645fc28b87a6cab55be0b7 560w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-cost-tracking.png?w=840&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=386ee2ed68a7d520eba20eac54f7fe52 840w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-cost-tracking.png?w=1100&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=479c2515e53f46d5d1da3b87a6dd993a 1100w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-cost-tracking.png?w=1650&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=1340c7589a4cb89ec071234aba3571d1 1650w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-cost-tracking.png?w=2500&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=69056cf4fe3271770cac4dc1704bcd0a 2500w" />

430</Frame>

431

432<CodeGroup>

433 ```bash Bash theme={null}

434 #!/bin/bash

435 input=$(cat)

436

437 MODEL=$(echo "$input" | jq -r '.model.display_name')

438 COST=$(echo "$input" | jq -r '.cost.total_cost_usd // 0')

439 DURATION_MS=$(echo "$input" | jq -r '.cost.total_duration_ms // 0')

440

441 COST_FMT=$(printf '$%.2f' "$COST")

442 DURATION_SEC=$((DURATION_MS / 1000))

443 MINS=$((DURATION_SEC / 60))

444 SECS=$((DURATION_SEC % 60))

445

446 echo "[$MODEL] 💰 $COST_FMT | ⏱️ ${MINS}m ${SECS}s"

447 ```

448

449 ```python Python theme={null}

450 #!/usr/bin/env python3

451 import json, sys

452

453 data = json.load(sys.stdin)

454 model = data['model']['display_name']

455 cost = data.get('cost', {}).get('total_cost_usd', 0) or 0

456 duration_ms = data.get('cost', {}).get('total_duration_ms', 0) or 0

457

458 duration_sec = duration_ms // 1000

459 mins, secs = duration_sec // 60, duration_sec % 60

460

461 print(f"[{model}] 💰 ${cost:.2f} | ⏱️ {mins}m {secs}s")

462 ```

463

464 ```javascript Node.js theme={null}

465 #!/usr/bin/env node

466 let input = '';

467 process.stdin.on('data', chunk => input += chunk);

468 process.stdin.on('end', () => {

156 const data = JSON.parse(input);469 const data = JSON.parse(input);

470 const model = data.model.display_name;

471 const cost = data.cost?.total_cost_usd || 0;

472 const durationMs = data.cost?.total_duration_ms || 0;

473

474 const durationSec = Math.floor(durationMs / 1000);

475 const mins = Math.floor(durationSec / 60);

476 const secs = durationSec % 60;

477

478 console.log(`[${model}] 💰 $${cost.toFixed(2)} | ⏱️ ${mins}m ${secs}s`);

479 });

480 ```

481</CodeGroup>

482

483### Display multiple lines

484

485Your script can output multiple lines to create a richer display. Each `echo` statement produces a separate row in the status area.

486

487<Frame>

488 <img src="https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-multiline.png?fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=60f11387658acc9ff75158ae85f2ac87" alt="A multi-line status line showing model name, directory, git branch on the first line, and a context usage progress bar with cost and duration on the second line" data-og-width="776" width="776" data-og-height="212" height="212" data-path="images/statusline-multiline.png" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-multiline.png?w=280&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=2e448b44c332620e6c9c2be4ded992e5 280w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-multiline.png?w=560&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=f796af2db9c68ab2ddbc5136840b9551 560w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-multiline.png?w=840&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=d29c13d6164773198a0b2c47b31f6c09 840w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-multiline.png?w=1100&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=d7720e5f51310185c0c02152f6c10d8b 1100w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-multiline.png?w=1650&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=b4e008cde27990a8d5783e41e5b93246 1650w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-multiline.png?w=2500&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=40ab24813303dc2e4c09f2675f3faf6e 2500w" />

489</Frame>

490

491This example combines several techniques: threshold-based colors (green under 70%, yellow 70-89%, red 90%+), a progress bar, and git branch info. Each `print` or `echo` statement creates a separate row:

492

493<CodeGroup>

494 ```bash Bash theme={null}

495 #!/bin/bash

496 input=$(cat)

497

498 MODEL=$(echo "$input" | jq -r '.model.display_name')

499 DIR=$(echo "$input" | jq -r '.workspace.current_dir')

500 COST=$(echo "$input" | jq -r '.cost.total_cost_usd // 0')

501 PCT=$(echo "$input" | jq -r '.context_window.used_percentage // 0' | cut -d. -f1)

502 DURATION_MS=$(echo "$input" | jq -r '.cost.total_duration_ms // 0')

503

504 CYAN='\033[36m'; GREEN='\033[32m'; YELLOW='\033[33m'; RED='\033[31m'; RESET='\033[0m'

505

506 # Pick bar color based on context usage

507 if [ "$PCT" -ge 90 ]; then BAR_COLOR="$RED"

508 elif [ "$PCT" -ge 70 ]; then BAR_COLOR="$YELLOW"

509 else BAR_COLOR="$GREEN"; fi

510

511 FILLED=$((PCT / 10)); EMPTY=$((10 - FILLED))

512 BAR=$(printf "%${FILLED}s" | tr ' ' '█')$(printf "%${EMPTY}s" | tr ' ' '░')

513

514 MINS=$((DURATION_MS / 60000)); SECS=$(((DURATION_MS % 60000) / 1000))

515

516 BRANCH=""

517 git rev-parse --git-dir > /dev/null 2>&1 && BRANCH=" | 🌿 $(git branch --show-current 2>/dev/null)"

518

519 echo -e "${CYAN}[$MODEL]${RESET} 📁 ${DIR##*/}$BRANCH"

520 COST_FMT=$(printf '$%.2f' "$COST")

521 echo -e "${BAR_COLOR}${BAR}${RESET} ${PCT}% | ${YELLOW}${COST_FMT}${RESET} | ⏱️ ${MINS}m ${SECS}s"

522 ```

523

524 ```python Python theme={null}

525 #!/usr/bin/env python3

526 import json, sys, subprocess, os

527

528 data = json.load(sys.stdin)

529 model = data['model']['display_name']

530 directory = os.path.basename(data['workspace']['current_dir'])

531 cost = data.get('cost', {}).get('total_cost_usd', 0) or 0

532 pct = int(data.get('context_window', {}).get('used_percentage', 0) or 0)

533 duration_ms = data.get('cost', {}).get('total_duration_ms', 0) or 0

534

535 CYAN, GREEN, YELLOW, RED, RESET = '\033[36m', '\033[32m', '\033[33m', '\033[31m', '\033[0m'

536

537 bar_color = RED if pct >= 90 else YELLOW if pct >= 70 else GREEN

538 filled = pct // 10

539 bar = '█' * filled + '░' * (10 - filled)

540

541 mins, secs = duration_ms // 60000, (duration_ms % 60000) // 1000

542

543 try:

544 branch = subprocess.check_output(['git', 'branch', '--show-current'], text=True, stderr=subprocess.DEVNULL).strip()

545 branch = f" | 🌿 {branch}" if branch else ""

546 except:

547 branch = ""

548

549 print(f"{CYAN}[{model}]{RESET} 📁 {directory}{branch}")

550 print(f"{bar_color}{bar}{RESET} {pct}% | {YELLOW}${cost:.2f}{RESET} | ⏱️ {mins}m {secs}s")

551 ```

552

553 ```javascript Node.js theme={null}

554 #!/usr/bin/env node

555 const { execSync } = require('child_process');

556 const path = require('path');

557

558 let input = '';

559 process.stdin.on('data', chunk => input += chunk);

560 process.stdin.on('end', () => {

561 const data = JSON.parse(input);

562 const model = data.model.display_name;

563 const dir = path.basename(data.workspace.current_dir);

564 const cost = data.cost?.total_cost_usd || 0;

565 const pct = Math.floor(data.context_window?.used_percentage || 0);

566 const durationMs = data.cost?.total_duration_ms || 0;

567

568 const CYAN = '\x1b[36m', GREEN = '\x1b[32m', YELLOW = '\x1b[33m', RED = '\x1b[31m', RESET = '\x1b[0m';

569

570 const barColor = pct >= 90 ? RED : pct >= 70 ? YELLOW : GREEN;

571 const filled = Math.floor(pct / 10);

572 const bar = '█'.repeat(filled) + '░'.repeat(10 - filled);

573

574 const mins = Math.floor(durationMs / 60000);

575 const secs = Math.floor((durationMs % 60000) / 1000);

576

577 let branch = '';

578 try {

579 branch = execSync('git branch --show-current', { encoding: 'utf8', stdio: ['pipe', 'pipe', 'ignore'] }).trim();

580 branch = branch ? ` | 🌿 ${branch}` : '';

581 } catch {}

582

583 console.log(`${CYAN}[${model}]${RESET} 📁 ${dir}${branch}`);

584 console.log(`${barColor}${bar}${RESET} ${pct}% | ${YELLOW}$${cost.toFixed(2)}${RESET} | ⏱️ ${mins}m ${secs}s`);

585 });

586 ```

587</CodeGroup>

588

589### Clickable links

590

591This example creates a clickable link to your GitHub repository. It reads the git remote URL, converts SSH format to HTTPS with `sed`, and wraps the repo name in OSC 8 escape codes. Hold Cmd (macOS) or Ctrl (Windows/Linux) and click to open the link in your browser.

592

593<Frame>

594 <img src="https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-links.png?fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=4bcc6e7deb7cf52f41ab85a219b52661" alt="A status line showing a clickable link to a GitHub repository" data-og-width="726" width="726" data-og-height="198" height="198" data-path="images/statusline-links.png" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-links.png?w=280&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=9386f78056f7be99599bcefe9e838180 280w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-links.png?w=560&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=d748012a0866c37dddc6babd4b7a88c4 560w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-links.png?w=840&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=bade8fbfcde957c1033c376c58b89131 840w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-links.png?w=1100&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=9f7e0c729ea093c3b39682619fd3f201 1100w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-links.png?w=1650&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=ccec17e90a89d82381888a4a9a8fa40e 1650w, https://mintcdn.com/claude-code/nibzesLaJVh4ydOq/images/statusline-links.png?w=2500&fit=max&auto=format&n=nibzesLaJVh4ydOq&q=85&s=4d2e34a4d2f24e174cae1256c84f9a52 2500w" />

595</Frame>

596

597Each script gets the git remote URL, converts SSH format to HTTPS, and wraps the repo name in OSC 8 escape codes. The Bash version uses `printf '%b'` which interprets backslash escapes more reliably than `echo -e` across different shells:

157 598

158 // Extract values599<CodeGroup>

600 ```bash Bash theme={null}

601 #!/bin/bash

602 input=$(cat)

603

604 MODEL=$(echo "$input" | jq -r '.model.display_name')

605

606 # Convert git SSH URL to HTTPS

607 REMOTE=$(git remote get-url origin 2>/dev/null | sed 's/git@github.com:/https:\/\/github.com\//' | sed 's/\.git$//')

608

609 if [ -n "$REMOTE" ]; then

610 REPO_NAME=$(basename "$REMOTE")

611 # OSC 8 format: \e]8;;URL\a then TEXT then \e]8;;\a

612 # printf %b interprets escape sequences reliably across shells

613 printf '%b' "[$MODEL] 🔗 \e]8;;${REMOTE}\a${REPO_NAME}\e]8;;\a\n"

614 else

615 echo "[$MODEL]"

616 fi

617 ```

618

619 ```python Python theme={null}

620 #!/usr/bin/env python3

621 import json, sys, subprocess, re, os

622

623 data = json.load(sys.stdin)

624 model = data['model']['display_name']

625

626 # Get git remote URL

627 try:

628 remote = subprocess.check_output(

629 ['git', 'remote', 'get-url', 'origin'],

630 stderr=subprocess.DEVNULL, text=True

631 ).strip()

632 # Convert SSH to HTTPS format

633 remote = re.sub(r'^git@github\.com:', 'https://github.com/', remote)

634 remote = re.sub(r'\.git$', '', remote)

635 repo_name = os.path.basename(remote)

636 # OSC 8 escape sequences

637 link = f"\033]8;;{remote}\a{repo_name}\033]8;;\a"

638 print(f"[{model}] 🔗 {link}")

639 except:

640 print(f"[{model}]")

641 ```

642

643 ```javascript Node.js theme={null}

644 #!/usr/bin/env node

645 const { execSync } = require('child_process');

646 const path = require('path');

647

648 let input = '';

649 process.stdin.on('data', chunk => input += chunk);

650 process.stdin.on('end', () => {

651 const data = JSON.parse(input);

159 const model = data.model.display_name;652 const model = data.model.display_name;

160 const currentDir = path.basename(data.workspace.current_dir);

161 653

162 // Check for git branch

163 let gitBranch = '';

164 try {654 try {

165 const headContent = fs.readFileSync('.git/HEAD', 'utf8').trim();655 let remote = execSync('git remote get-url origin', { encoding: 'utf8', stdio: ['pipe', 'pipe', 'ignore'] }).trim();

166 if (headContent.startsWith('ref: refs/heads/')) {656 // Convert SSH to HTTPS format

167 gitBranch = ` | 🌿 ${headContent.replace('ref: refs/heads/', '')}`;657 remote = remote.replace(/^git@github\.com:/, 'https://github.com/').replace(/\.git$/, '');

658 const repoName = path.basename(remote);

659 // OSC 8 escape sequences

660 const link = `\x1b]8;;${remote}\x07${repoName}\x1b]8;;\x07`;

661 console.log(`[${model}] 🔗 ${link}`);

662 } catch {

663 console.log(`[${model}]`);

168 }664 }

169 } catch (e) {665 });

170 // Not a git repo or can't read HEAD666 ```

667</CodeGroup>

668

669### Cache expensive operations

670

671Your status line script runs frequently during active sessions. Commands like `git status` or `git diff` can be slow, especially in large repositories. This example caches git information to a temp file and only refreshes it every 5 seconds.

672

673Use a stable, fixed filename for the cache file like `/tmp/statusline-git-cache`. Each status line invocation runs as a new process, so process-based identifiers like `$$`, `os.getpid()`, or `process.pid` produce a different value every time and the cache is never reused.

674

675Each script checks if the cache file is missing or older than 5 seconds before running git commands:

676

677<CodeGroup>

678 ```bash Bash theme={null}

679 #!/bin/bash

680 input=$(cat)

681

682 MODEL=$(echo "$input" | jq -r '.model.display_name')

683 DIR=$(echo "$input" | jq -r '.workspace.current_dir')

684

685 CACHE_FILE="/tmp/statusline-git-cache"

686 CACHE_MAX_AGE=5 # seconds

687

688 cache_is_stale() {

689 [ ! -f "$CACHE_FILE" ] || \

690 # stat -f %m is macOS, stat -c %Y is Linux

691 [ $(($(date +%s) - $(stat -f %m "$CACHE_FILE" 2>/dev/null || stat -c %Y "$CACHE_FILE" 2>/dev/null || echo 0))) -gt $CACHE_MAX_AGE ]

171 }692 }

172 693

173 console.log(`[${model}] 📁 ${currentDir}${gitBranch}`);694 if cache_is_stale; then

174});695 if git rev-parse --git-dir > /dev/null 2>&1; then

175```696 BRANCH=$(git branch --show-current 2>/dev/null)

697 STAGED=$(git diff --cached --numstat 2>/dev/null | wc -l | tr -d ' ')

698 MODIFIED=$(git diff --numstat 2>/dev/null | wc -l | tr -d ' ')

699 echo "$BRANCH|$STAGED|$MODIFIED" > "$CACHE_FILE"

700 else

701 echo "||" > "$CACHE_FILE"

702 fi

703 fi

176 704

177### Helper Function Approach705 IFS='|' read -r BRANCH STAGED MODIFIED < "$CACHE_FILE"

~~178~~

179For more complex bash scripts, you can create helper functions:

~~180~~

181```bash theme={null}

182#!/bin/bash

183# Read JSON input once

184input=$(cat)

~~185~~

186# Helper functions for common extractions

187get_model_name() { echo "$input" | jq -r '.model.display_name'; }

188get_current_dir() { echo "$input" | jq -r '.workspace.current_dir'; }

189get_project_dir() { echo "$input" | jq -r '.workspace.project_dir'; }

190get_version() { echo "$input" | jq -r '.version'; }

191get_cost() { echo "$input" | jq -r '.cost.total_cost_usd'; }

192get_duration() { echo "$input" | jq -r '.cost.total_duration_ms'; }

193get_lines_added() { echo "$input" | jq -r '.cost.total_lines_added'; }

194get_lines_removed() { echo "$input" | jq -r '.cost.total_lines_removed'; }

195get_input_tokens() { echo "$input" | jq -r '.context_window.total_input_tokens'; }

196get_output_tokens() { echo "$input" | jq -r '.context_window.total_output_tokens'; }

197get_context_window_size() { echo "$input" | jq -r '.context_window.context_window_size'; }

~~198~~

199# Use the helpers

200MODEL=$(get_model_name)

201DIR=$(get_current_dir)

202echo "[$MODEL] 📁 ${DIR##*/}"

203```

204 706

205### Context Window Usage707 if [ -n "$BRANCH" ]; then

708 echo "[$MODEL] 📁 ${DIR##*/} | 🌿 $BRANCH +$STAGED ~$MODIFIED"

709 else

710 echo "[$MODEL] 📁 ${DIR##*/}"

711 fi

712 ```

206 713

207Display the percentage of context window consumed. The `context_window` object contains:714 ```python Python theme={null}

715 #!/usr/bin/env python3

716 import json, sys, subprocess, os, time

208 717

209* `total_input_tokens` / `total_output_tokens`: Cumulative totals across the entire session718 data = json.load(sys.stdin)

210* `current_usage`: Current context window usage from the last API call (may be `null` if no messages yet)719 model = data['model']['display_name']

211 * `input_tokens`: Input tokens in current context720 directory = os.path.basename(data['workspace']['current_dir'])

212 * `output_tokens`: Output tokens generated

213 * `cache_creation_input_tokens`: Tokens written to cache

214 * `cache_read_input_tokens`: Tokens read from cache

215 721

216For accurate context percentage, use `current_usage` which reflects the actual context window state:722 CACHE_FILE = "/tmp/statusline-git-cache"

723 CACHE_MAX_AGE = 5 # seconds

217 724

218```bash theme={null}725 def cache_is_stale():

219#!/bin/bash726 if not os.path.exists(CACHE_FILE):

220input=$(cat)727 return True

728 return time.time() - os.path.getmtime(CACHE_FILE) > CACHE_MAX_AGE

221 729

222MODEL=$(echo "$input" | jq -r '.model.display_name')730 if cache_is_stale():

223CONTEXT_SIZE=$(echo "$input" | jq -r '.context_window.context_window_size')731 try:

224USAGE=$(echo "$input" | jq '.context_window.current_usage')732 subprocess.check_output(['git', 'rev-parse', '--git-dir'], stderr=subprocess.DEVNULL)

733 branch = subprocess.check_output(['git', 'branch', '--show-current'], text=True).strip()

734 staged = subprocess.check_output(['git', 'diff', '--cached', '--numstat'], text=True).strip()

735 modified = subprocess.check_output(['git', 'diff', '--numstat'], text=True).strip()

736 staged_count = len(staged.split('\n')) if staged else 0

737 modified_count = len(modified.split('\n')) if modified else 0

738 with open(CACHE_FILE, 'w') as f:

739 f.write(f"{branch}|{staged_count}|{modified_count}")

740 except:

741 with open(CACHE_FILE, 'w') as f:

742 f.write("||")

743

744 with open(CACHE_FILE) as f:

745 branch, staged, modified = f.read().strip().split('|')

746

747 if branch:

748 print(f"[{model}] 📁 {directory} | 🌿 {branch} +{staged} ~{modified}")

749 else:

750 print(f"[{model}] 📁 {directory}")

751 ```

752

753 ```javascript Node.js theme={null}

754 #!/usr/bin/env node

755 const { execSync } = require('child_process');

756 const fs = require('fs');

757 const path = require('path');

758

759 let input = '';

760 process.stdin.on('data', chunk => input += chunk);

761 process.stdin.on('end', () => {

762 const data = JSON.parse(input);

763 const model = data.model.display_name;

764 const dir = path.basename(data.workspace.current_dir);

225 765

226if [ "$USAGE" != "null" ]; then766 const CACHE_FILE = '/tmp/statusline-git-cache';

227 # Calculate current context from current_usage fields767 const CACHE_MAX_AGE = 5; // seconds

228 CURRENT_TOKENS=$(echo "$USAGE" | jq '.input_tokens + .cache_creation_input_tokens + .cache_read_input_tokens')768

229 PERCENT_USED=$((CURRENT_TOKENS * 100 / CONTEXT_SIZE))769 const cacheIsStale = () => {

230 echo "[$MODEL] Context: ${PERCENT_USED}%"770 if (!fs.existsSync(CACHE_FILE)) return true;

231else771 return (Date.now() / 1000) - fs.statSync(CACHE_FILE).mtimeMs / 1000 > CACHE_MAX_AGE;

232 echo "[$MODEL] Context: 0%"772 };

233fi773

234```774 if (cacheIsStale()) {

775 try {

776 execSync('git rev-parse --git-dir', { stdio: 'ignore' });

777 const branch = execSync('git branch --show-current', { encoding: 'utf8' }).trim();

778 const staged = execSync('git diff --cached --numstat', { encoding: 'utf8' }).trim().split('\n').filter(Boolean).length;

779 const modified = execSync('git diff --numstat', { encoding: 'utf8' }).trim().split('\n').filter(Boolean).length;

780 fs.writeFileSync(CACHE_FILE, `${branch}|${staged}|${modified}`);

781 } catch {

782 fs.writeFileSync(CACHE_FILE, '||');

783 }

784 }

785

786 const [branch, staged, modified] = fs.readFileSync(CACHE_FILE, 'utf8').trim().split('|');

787

788 if (branch) {

789 console.log(`[${model}] 📁 ${dir} | 🌿 ${branch} +${staged} ~${modified}`);

790 } else {

791 console.log(`[${model}] 📁 ${dir}`);

792 }

793 });

794 ```

795</CodeGroup>

235 796

236## Tips797## Tips

237 798

238* Keep your status line concise - it should fit on one line799* **Test with mock input**: `echo '{"model":{"display_name":"Opus"},"context_window":{"used_percentage":25}}' | ./statusline.sh`

239* Use emojis (if your terminal supports them) and colors to make information scannable800* **Keep output short**: the status bar has limited width, so long output may get truncated or wrap awkwardly

240* Use `jq` for JSON parsing in Bash (see examples above)801* **Cache slow operations**: your script runs frequently during active sessions, so commands like `git status` can cause lag. See the [caching example](#cache-expensive-operations) for how to handle this.

241* Test your script by running it manually with mock JSON input: `echo '{"model":{"display_name":"Test"},"workspace":{"current_dir":"/test"}}' | ./statusline.sh`802

242* Consider caching expensive operations (like git status) if needed803Community projects like [ccstatusline](https://github.com/sirmalloc/ccstatusline) and [starship-claude](https://github.com/martinemde/starship-claude) provide pre-built configurations with themes and additional features.

243 804

244## Troubleshooting805## Troubleshooting

245 806

246* If your status line doesn't appear, check that your script is executable (`chmod +x`)807**Status line not appearing**

247* Ensure your script outputs to stdout (not stderr)808

809* Verify your script is executable: `chmod +x ~/.claude/statusline.sh`

810* Check that your script outputs to stdout, not stderr

811* Run your script manually to verify it produces output

812* If `disableAllHooks` is set to `true` in your settings, the status line is also disabled. Remove this setting or set it to `false` to re-enable.

813

814**Status line shows `--` or empty values**

815

816* Fields may be `null` before the first API response completes

817* Handle null values in your script with fallbacks such as `// 0` in jq

818* Restart Claude Code if values remain empty after multiple messages

819

820**Context percentage shows unexpected values**

821

822* Use `used_percentage` for accurate context state rather than cumulative totals

823* The `total_input_tokens` and `total_output_tokens` are cumulative across the session and may exceed the context window size

824* Context percentage may differ from `/context` output due to when each is calculated

825

826**OSC 8 links not clickable**

827

828* Verify your terminal supports OSC 8 hyperlinks (iTerm2, Kitty, WezTerm)

829* Terminal.app does not support clickable links

830* SSH and tmux sessions may strip OSC sequences depending on configuration

831* If escape sequences appear as literal text like `\e]8;;`, use `printf '%b'` instead of `echo -e` for more reliable escape handling

832

833**Display glitches with escape sequences**

834

835* Complex escape sequences (ANSI colors, OSC 8 links) can occasionally cause garbled output if they overlap with other UI updates

836* If you see corrupted text, try simplifying your script to plain text output

837* Multi-line status lines with escape codes are more prone to rendering issues than single-line plain text

838

839**Script errors or hangs**

248 840

841* Scripts that exit with non-zero codes or produce no output cause the status line to go blank

842* Slow scripts block the status line from updating until they complete. Keep scripts fast to avoid stale output.

843* If a new update triggers while a slow script is running, the in-flight script is cancelled

844* Test your script independently with mock input before configuring it

249 845

846**Notifications share the status line row**

250 847

251> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt848* System notifications like MCP server errors, auto-updates, and token warnings display on the right side of the same row as your status line

849* Enabling verbose mode adds a token counter to this area

850* On narrow terminals, these notifications may truncate your status line output

sub-agents.md +531 −288

Details

~~1# Subagents~~1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

5# Create custom subagents

2 6

3> Create and use specialized AI subagents in Claude Code for task-specific workflows and improved context management.7> Create and use specialized AI subagents in Claude Code for task-specific workflows and improved context management.

4 8

5Custom subagents in Claude Code are specialized AI assistants that can be invoked to handle specific types of tasks. They enable more efficient problem-solving by providing task-specific configurations with customized system prompts, tools and a separate context window.9Subagents are specialized AI assistants that handle specific types of tasks. Each subagent runs in its own context window with a custom system prompt, specific tool access, and independent permissions. When Claude encounters a task that matches a subagent's description, it delegates to that subagent, which works independently and returns results.

11<Note>

12 If you need multiple agents working in parallel and communicating with each other, see [agent teams](/en/agent-teams) instead. Subagents work within a single session; agent teams coordinate across separate sessions.

13</Note>

15Subagents help you:

17* **Preserve context** by keeping exploration and implementation out of your main conversation

18* **Enforce constraints** by limiting which tools a subagent can use

19* **Reuse configurations** across projects with user-level subagents

20* **Specialize behavior** with focused system prompts for specific domains

21* **Control costs** by routing tasks to faster, cheaper models like Haiku

23Claude uses each subagent's description to decide when to delegate tasks. When you create a subagent, write a clear description so Claude knows when to use it.

25Claude Code includes several built-in subagents like **Explore**, **Plan**, and **general-purpose**. You can also create custom subagents to handle specific tasks. This page covers the [built-in subagents](#built-in-subagents), [how to create your own](#quickstart-create-your-first-subagent), [full configuration options](#configure-subagents), [patterns for working with subagents](#work-with-subagents), and [example subagents](#example-subagents).

27## Built-in subagents

29Claude Code includes built-in subagents that Claude automatically uses when appropriate. Each inherits the parent conversation's permissions with additional tool restrictions.

31<Tabs>

32 <Tab title="Explore">

33 A fast, read-only agent optimized for searching and analyzing codebases.

6 34

~~7## What are subagents?~~35 * **Model**: Haiku (fast, low-latency)

36 * **Tools**: Read-only tools (denied access to Write and Edit tools)

37 * **Purpose**: File discovery, code search, codebase exploration

8 38

~~9Subagents are pre-configured AI personalities that Claude Code can delegate tasks to. Each subagent:~~39 Claude delegates to Explore when it needs to search or understand a codebase without making changes. This keeps exploration results out of your main conversation context.

10 40

~~11* Has a specific purpose and expertise area~~41 When invoking Explore, Claude specifies a thoroughness level: **quick** for targeted lookups, **medium** for balanced exploration, or **very thorough** for comprehensive analysis.

~~12* Uses its own context window separate from the main conversation~~42 </Tab>

~~13* Can be configured with specific tools it's allowed to use~~

~~14* Includes a custom system prompt that guides its behavior~~

15 43

~~16When Claude Code encounters a task that matches a subagent's expertise, it can delegate that task to the specialized subagent, which works independently and returns results.~~44 <Tab title="Plan">

45 A research agent used during [plan mode](/en/common-workflows#use-plan-mode-for-safe-code-analysis) to gather context before presenting a plan.

17 46

~~18## Key benefits~~47 * **Model**: Inherits from main conversation

48 * **Tools**: Read-only tools (denied access to Write and Edit tools)

49 * **Purpose**: Codebase research for planning

19 50

~~20<CardGroup cols={2}>~~51 When you're in plan mode and Claude needs to understand your codebase, it delegates research to the Plan subagent. This prevents infinite nesting (subagents cannot spawn other subagents) while still gathering necessary context.

~~21 <Card title="Context preservation" icon="layer-group">~~52 </Tab>

~~22 Each subagent operates in its own context, preventing pollution of the main conversation and keeping it focused on high-level objectives.~~

~~23 </Card>~~

24 53

~~25 <Card title="Specialized expertise" icon="brain">~~54 <Tab title="General-purpose">

~~26 Subagents can be fine-tuned with detailed instructions for specific domains, leading to higher success rates on designated tasks.~~55 A capable agent for complex, multi-step tasks that require both exploration and action.

~~27 </Card>~~

28 56

~~29 <Card title="Reusability" icon="rotate">~~57 * **Model**: Inherits from main conversation

~~30 Once created, you can use subagents across different projects and share them with your team for consistent workflows.~~58 * **Tools**: All tools

~~31 </Card>~~59 * **Purpose**: Complex research, multi-step operations, code modifications

32 60

~~33 <Card title="Flexible permissions" icon="shield-check">~~61 Claude delegates to general-purpose when the task requires both exploration and modification, complex reasoning to interpret results, or multiple dependent steps.

~~34 Each subagent can have different tool access levels, allowing you to limit powerful tools to specific subagent types.~~62 </Tab>

~~35 </Card>~~

~~36</CardGroup>~~

37 63

~~38## Quick start~~64 <Tab title="Other">

65 Claude Code includes additional helper agents for specific tasks. These are typically invoked automatically, so you don't need to use them directly.

39 66

~~40To create your first subagent:~~67 | Agent | Model | When Claude uses it |

68 | :---------------- | :------- | :------------------------------------------------------- |

69 | Bash | Inherits | Running terminal commands in a separate context |

70 | statusline-setup | Sonnet | When you run `/statusline` to configure your status line |

71 | Claude Code Guide | Haiku | When you ask questions about Claude Code features |

72 </Tab>

73</Tabs>

75Beyond these built-in subagents, you can create your own with custom prompts, tool restrictions, permission modes, hooks, and skills. The following sections show how to get started and customize subagents.

77## Quickstart: create your first subagent

79Subagents are defined in Markdown files with YAML frontmatter. You can [create them manually](#write-subagent-files) or use the `/agents` command.

81This walkthrough guides you through creating a user-level subagent with the `/agent` command. The subagent reviews code and suggests improvements for the codebase.

41 82

42<Steps>83<Steps>

43 <Step title="Open the subagents interface">84 <Step title="Open the subagents interface">

~~44 Run the following command:~~85 In Claude Code, run:

45 86

46 ```87 ```

47 /agents88 /agents

48 ```89 ```

49 </Step>90 </Step>

50 91

~~51 <Step title="Select 'Create New Agent'">~~92 <Step title="Create a new user-level agent">

~~52 Choose whether to create a project-level or user-level subagent~~93 Select **Create new agent**, then choose **User-level**. This saves the subagent to `~/.claude/agents/` so it's available in all your projects.

94 </Step>

96 <Step title="Generate with Claude">

97 Select **Generate with Claude**. When prompted, describe the subagent:

99 ```

100 A code improvement agent that scans files and suggests improvements

101 for readability, performance, and best practices. It should explain

102 each issue, show the current code, and provide an improved version.

103 ```

104

105 Claude generates the system prompt and configuration. Press `e` to open it in your editor if you want to customize it.

53 </Step>106 </Step>

54 107

~~55 <Step title="Define the subagent">~~108 <Step title="Select tools">

~~56 * **Recommended**: generate with Claude first, then customize to make it yours~~109 For a read-only reviewer, deselect everything except **Read-only tools**. If you keep all tools selected, the subagent inherits all tools available to the main conversation.

~~57 * Describe your subagent in detail, including when Claude should use it~~

~~58 * Select the tools you want to grant access to, or leave this blank to inherit all tools~~

~~59 * The interface shows all available tools~~

~~60 * If you're generating with Claude, you can also edit the system prompt in your own editor by pressing `e`~~

61 </Step>110 </Step>

62 111

~~63 <Step title="Save and use">~~112 <Step title="Select model">

~~64 Your subagent is now available. Claude uses it automatically when appropriate, or you can invoke it explicitly:~~113 Choose which model the subagent uses. For this example agent, select **Sonnet**, which balances capability and speed for analyzing code patterns.

114 </Step>

115

116 <Step title="Choose a color">

117 Pick a background color for the subagent. This helps you identify which subagent is running in the UI.

118 </Step>

119

120 <Step title="Save and try it out">

121 Save the subagent. It's available immediately (no restart needed). Try it:

65 122

66 ```123 ```

~~67 > Use the code-reviewer subagent to check my recent changes~~124 Use the code-improver agent to suggest improvements in this project

68 ```125 ```

126

127 Claude delegates to your new subagent, which scans the codebase and returns improvement suggestions.

69 </Step>128 </Step>

70</Steps>129</Steps>

71 130

~~72## Subagent configuration~~131You now have a subagent you can use in any project on your machine to analyze codebases and suggest improvements.

73 132

~~74### File locations~~133You can also create subagents manually as Markdown files, define them via CLI flags, or distribute them through plugins. The following sections cover all configuration options.

75 134

~~76Subagents are stored as Markdown files with YAML frontmatter in two possible locations:~~135## Configure subagents

77 136

~~79| :-------------------- | :------------------ | :---------------------------- | :------- |~~

82 138

~~83When subagent names conflict, project-level subagents take precedence over user-level subagents.~~139The `/agents` command provides an interactive interface for managing subagents. Run `/agents` to:

84 140

~~85### Plugin agents~~141* View all available subagents (built-in, user, project, and plugin)

142* Create new subagents with guided setup or Claude generation

143* Edit existing subagent configuration and tool access

144* Delete custom subagents

145* See which subagents are active when duplicates exist

86 146

~~87[Plugins](/en/plugins) can provide custom subagents that integrate seamlessly with Claude Code. Plugin agents work identically to user-defined agents and appear in the `/agents` interface.~~147This is the recommended way to create and manage subagents. For manual creation or automation, you can also add subagent files directly.

88 148

~~89**Plugin agent locations**: plugins include agents in their `agents/` directory (or custom paths specified in the plugin manifest).~~149### Choose the subagent scope

90 150

~~91**Using plugin agents**:~~151Subagents are Markdown files with YAML frontmatter. Store them in different locations depending on scope. When multiple subagents share the same name, the higher-priority location wins.

92 152

~~94* Can be invoked explicitly: "Use the code-reviewer agent from the security-plugin"~~154| :--------------------------- | :---------------------- | :---------- | :------------------------------------ |

97 159

~~98See the [plugin components reference](/en/plugins-reference#agents) for details on creating plugin agents.~~160**Project subagents** (`.claude/agents/`) are ideal for subagents specific to a codebase. Check them into version control so your team can use and improve them collaboratively.

99 161

100### CLI-based configuration162**User subagents** (`~/.claude/agents/`) are personal subagents available in all your projects.

101 163

102You can also define subagents dynamically using the `--agents` CLI flag, which accepts a JSON object:164**CLI-defined subagents** are passed as JSON when launching Claude Code. They exist only for that session and aren't saved to disk, making them useful for quick testing or automation scripts:

103 165

104```bash theme={null}166```bash theme={null}

105claude --agents '{167claude --agents '{

112}'174}'

113```175```

114 176

115**Priority**: CLI-defined subagents have lower priority than project-level subagents but higher priority than user-level subagents.177The `--agents` flag accepts JSON with the same [frontmatter](#supported-frontmatter-fields) fields as file-based subagents: `description`, `prompt`, `tools`, `disallowedTools`, `model`, `permissionMode`, `mcpServers`, `hooks`, `maxTurns`, `skills`, and `memory`. Use `prompt` for the system prompt, equivalent to the markdown body in file-based subagents. See the [CLI reference](/en/cli-reference#agents-flag-format) for the full JSON format.

~~116~~

117**Use case**: This approach is useful for:

118 178

119* Quick testing of subagent configurations179**Plugin subagents** come from [plugins](/en/plugins) you've installed. They appear in `/agents` alongside your custom subagents. See the [plugin components reference](/en/plugins-reference#agents) for details on creating plugin subagents.

120* Session-specific subagents that don't need to be saved

121* Automation scripts that need custom subagents

122* Sharing subagent definitions in documentation or scripts

123 180

124For detailed information about the JSON format and all available options, see the [CLI reference documentation](/en/cli-reference#agents-flag-format).181### Write subagent files

125 182

126### File format183Subagent files use YAML frontmatter for configuration, followed by the system prompt in Markdown:

127 184

128Each subagent is defined in a Markdown file with this structure:185<Note>

186 Subagents are loaded at session start. If you create a subagent by manually adding a file, restart your session or use `/agents` to load it immediately.

187</Note>

129 188

130```markdown theme={null}189```markdown theme={null}

131---190---

132name: your-sub-agent-name191name: code-reviewer

133description: Description of when this subagent should be invoked192description: Reviews code for quality and best practices

134tools: tool1, tool2, tool3 # Optional - inherits all tools if omitted193tools: Read, Glob, Grep

135model: sonnet # Optional - specify model alias or 'inherit'194model: sonnet

136permissionMode: default # Optional - permission mode for the subagent

137skills: skill1, skill2 # Optional - skills to auto-load

138---195---

139 196

140Your subagent's system prompt goes here. This can be multiple paragraphs197You are a code reviewer. When invoked, analyze the code and provide

141and should clearly define the subagent's role, capabilities, and approach198specific, actionable feedback on quality, security, and best practices.

142to solving problems.

~~143~~

144Include specific instructions, best practices, and any constraints

145the subagent should follow.

146```199```

147 200

148#### Configuration fields201The frontmatter defines the subagent's metadata and configuration. The body becomes the system prompt that guides the subagent's behavior. Subagents receive only this system prompt (plus basic environment details like working directory), not the full Claude Code system prompt.

202

203#### Supported frontmatter fields

204

205The following fields can be used in the YAML frontmatter. Only `name` and `description` are required.

149 206

151| :--------------- | :------- | :-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |208| :---------------- | :------- | :-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |

152| `name` | Yes | Unique identifier using lowercase letters and hyphens |209| `name` | Yes | Unique identifier using lowercase letters and hyphens |

153| `description` | Yes | Natural language description of the subagent's purpose |210| `description` | Yes | When Claude should delegate to this subagent |

154| `tools` | No | Comma-separated list of specific tools. If omitted, inherits all tools from the main thread |211| `tools` | No | [Tools](#available-tools) the subagent can use. Inherits all tools if omitted |

155| `model` | No | Model to use for this subagent. Can be a model alias (`sonnet`, `opus`, `haiku`) or `'inherit'` to use the main conversation's model. If omitted, defaults to the [configured subagent model](/en/model-config) |212| `disallowedTools` | No | Tools to deny, removed from inherited or specified list |

156| `permissionMode` | No | Permission mode for the subagent. Valid values: `default`, `acceptEdits`, `bypassPermissions`, `plan`, `ignore`. Controls how the subagent handles permission requests |213| `model` | No | [Model](#choose-a-model) to use: `sonnet`, `opus`, `haiku`, or `inherit`. Defaults to `inherit` |

157| `skills` | No | Comma-separated list of skill names to auto-load when the subagent starts. Skills are loaded into the subagent's context automatically |214| `permissionMode` | No | [Permission mode](#permission-modes): `default`, `acceptEdits`, `delegate`, `dontAsk`, `bypassPermissions`, or `plan` |

215| `maxTurns` | No | Maximum number of agentic turns before the subagent stops |

216| `skills` | No | [Skills](/en/skills) to load into the subagent's context at startup. The full skill content is injected, not just made available for invocation. Subagents don't inherit skills from the parent conversation |

217| `mcpServers` | No | [MCP servers](/en/mcp) available to this subagent. Each entry is either a server name referencing an already-configured server (e.g., `"slack"`) or an inline definition with the server name as key and a full [MCP server config](/en/mcp#configure-mcp-servers) as value |

218| `hooks` | No | [Lifecycle hooks](#define-hooks-for-subagents) scoped to this subagent |

219| `memory` | No | [Persistent memory scope](#enable-persistent-memory): `user`, `project`, or `local`. Enables cross-session learning |

158 220

159### Model selection221### Choose a model

160 222

161The `model` field allows you to control which [AI model](/en/model-config) the subagent uses:223The `model` field controls which [AI model](/en/model-config) the subagent uses:

162 224

163* **Model alias**: Use one of the available aliases: `sonnet`, `opus`, or `haiku`225* **Model alias**: Use one of the available aliases: `sonnet`, `opus`, or `haiku`

164* **`'inherit'`**: Use the same model as the main conversation (useful for consistency)226* **inherit**: Use the same model as the main conversation

165* **Omitted**: If not specified, uses the default model configured for subagents (`sonnet`)227* **Omitted**: If not specified, defaults to `inherit` (uses the same model as the main conversation)

166 228

167<Note>229### Control subagent capabilities

168 Using `'inherit'` is particularly useful when you want your subagents to adapt to the model choice of the main conversation, ensuring consistent capabilities and response style throughout your session.

169</Note>

170 230

171### Available tools231You can control what subagents can do through tool access, permission modes, and conditional rules.

172 232

173Subagents can be granted access to any of Claude Code's internal tools. See the [tools documentation](/en/settings#tools-available-to-claude) for a complete list of available tools.233#### Available tools

174 234

175<Tip>235Subagents can use any of Claude Code's [internal tools](/en/settings#tools-available-to-claude). By default, subagents inherit all tools from the main conversation, including MCP tools.

176 **Recommended:** Use the `/agents` command to modify tool access - it provides an interactive interface that lists all available tools, including any connected MCP server tools, making it easier to select the ones you need.

177</Tip>

178 236

179You have two options for configuring tools:237To restrict tools, use the `tools` field (allowlist) or `disallowedTools` field (denylist):

180 238

181* **Omit the `tools` field** to inherit all tools from the main thread (default), including MCP tools239```yaml theme={null}

182* **Specify individual tools** as a comma-separated list for more granular control (can be edited manually or via `/agents`)240---

241name: safe-researcher

242description: Research agent with restricted capabilities

243tools: Read, Grep, Glob, Bash

244disallowedTools: Write, Edit

245---

246```

183 247

184**MCP Tools**: Subagents can access MCP tools from configured MCP servers. When the `tools` field is omitted, subagents inherit all MCP tools available to the main thread.248#### Restrict which subagents can be spawned

185 249

186## Managing subagents250When an agent runs as the main thread with `claude --agent`, it can spawn subagents using the Task tool. To restrict which subagent types it can spawn, use `Task(agent_type)` syntax in the `tools` field:

187 251

188### Using the /agents command (Recommended)252```yaml theme={null}

253---

254name: coordinator

255description: Coordinates work across specialized agents

256tools: Task(worker, researcher), Read, Bash

257---

258```

189 259

190The `/agents` command provides a comprehensive interface for subagent management:260This is an allowlist: only the `worker` and `researcher` subagents can be spawned. If the agent tries to spawn any other type, the request fails and the agent sees only the allowed types in its prompt. To block specific agents while allowing all others, use [`permissions.deny`](#disable-specific-subagents) instead.

191 261

192```262To allow spawning any subagent without restrictions, use `Task` without parentheses:

193/agents263

264```yaml theme={null}

265tools: Task, Read, Bash

194```266```

195 267

196This opens an interactive menu where you can:268If `Task` is omitted from the `tools` list entirely, the agent cannot spawn any subagents. This restriction only applies to agents running as the main thread with `claude --agent`. Subagents cannot spawn other subagents, so `Task(agent_type)` has no effect in subagent definitions.

197 269

198* View all available subagents (built-in, user, and project)270#### Permission modes

199* Create new subagents with guided setup

200* Edit existing custom subagents, including their tool access

201* Delete custom subagents

202* See which subagents are active when duplicates exist

203* **Manage tool permissions** with a complete list of available tools

204 271

205### Direct file management272The `permissionMode` field controls how the subagent handles permission prompts. Subagents inherit the permission context from the main conversation but can override the mode.

206 273

207You can also manage subagents by working directly with their files:274| Mode | Behavior |

275| :------------------ | :------------------------------------------------------------------------------------------------------------------- |

276| `default` | Standard permission checking with prompts |

277| `acceptEdits` | Auto-accept file edits |

278| `dontAsk` | Auto-deny permission prompts (explicitly allowed tools still work) |

279| `delegate` | Coordination-only mode for [agent team](/en/agent-teams#use-delegate-mode) leads. Restricts to team management tools |

280| `bypassPermissions` | Skip all permission checks |

281| `plan` | Plan mode (read-only exploration) |

208 282

209```bash theme={null}283<Warning>

210# Create a project subagent284 Use `bypassPermissions` with caution. It skips all permission checks, allowing the subagent to execute any operation without approval.

211mkdir -p .claude/agents285</Warning>

212echo '---286

213name: test-runner287If the parent uses `bypassPermissions`, this takes precedence and cannot be overridden.

214description: Use proactively to run tests and fix failures288

289#### Preload skills into subagents

215 290

216You are a test automation expert. When you see code changes, proactively run the appropriate tests. If tests fail, analyze the failures and fix them while preserving the original test intent.' > .claude/agents/test-runner.md291Use the `skills` field to inject skill content into a subagent's context at startup. This gives the subagent domain knowledge without requiring it to discover and load skills during execution.

292

293```yaml theme={null}

294---

295name: api-developer

296description: Implement API endpoints following team conventions

297skills:

298 - api-conventions

299 - error-handling-patterns

300---

217 301

218# Create a user subagent302Implement API endpoints. Follow the conventions and patterns from the preloaded skills.

219mkdir -p ~/.claude/agents

220# ... create subagent file

221```303```

222 304

305The full content of each skill is injected into the subagent's context, not just made available for invocation. Subagents don't inherit skills from the parent conversation; you must list them explicitly.

306

223<Note>307<Note>

224 Subagents created by manually adding files will be loaded the next time you start a Claude Code session. To create and use a subagent immediately without restarting, use the `/agents` command instead.308 This is the inverse of [running a skill in a subagent](/en/skills#run-skills-in-a-subagent). With `skills` in a subagent, the subagent controls the system prompt and loads skill content. With `context: fork` in a skill, the skill content is injected into the agent you specify. Both use the same underlying system.

225</Note>309</Note>

226 310

227## Using subagents effectively311#### Enable persistent memory

228 312

229### Automatic delegation313The `memory` field gives the subagent a persistent directory that survives across conversations. The subagent uses this directory to build up knowledge over time, such as codebase patterns, debugging insights, and architectural decisions.

230 314

231Claude Code proactively delegates tasks based on:315```yaml theme={null}

316---

317name: code-reviewer

318description: Reviews code for quality and best practices

319memory: user

320---

232 321

233* The task description in your request322You are a code reviewer. As you review code, update your agent memory with

234* The `description` field in subagent configurations323patterns, conventions, and recurring issues you discover.

235* Current context and available tools324```

236 325

237<Tip>326Choose a scope based on how broadly the memory should apply:

238 To encourage more proactive subagent use, include phrases like "use PROACTIVELY" or "MUST BE USED" in your `description` field.327

239</Tip>328| Scope | Location | Use when |

329| :-------- | :-------------------------------------------- | :------------------------------------------------------------------------------------------ |

330| `user` | `~/.claude/agent-memory/<name-of-agent>/` | the subagent should remember learnings across all projects |

331| `project` | `.claude/agent-memory/<name-of-agent>/` | the subagent's knowledge is project-specific and shareable via version control |

332| `local` | `.claude/agent-memory-local/<name-of-agent>/` | the subagent's knowledge is project-specific but should not be checked into version control |

333

334When memory is enabled:

335

336* The subagent's system prompt includes instructions for reading and writing to the memory directory.

337* The subagent's system prompt also includes the first 200 lines of `MEMORY.md` in the memory directory, with instructions to curate `MEMORY.md` if it exceeds 200 lines.

338* Read, Write, and Edit tools are automatically enabled so the subagent can manage its memory files.

339

340##### Persistent memory tips

240 341

241### Explicit invocation342* `user` is the recommended default scope. Use `project` or `local` when the subagent's knowledge is only relevant to a specific codebase.

343* Ask the subagent to consult its memory before starting work: "Review this PR, and check your memory for patterns you've seen before."

344* Ask the subagent to update its memory after completing a task: "Now that you're done, save what you learned to your memory." Over time, this builds a knowledge base that makes the subagent more effective.

345* Include memory instructions directly in the subagent's markdown file so it proactively maintains its own knowledge base:

242 346

243Request a specific subagent by mentioning it in your command:347 ```markdown theme={null}

348 Update your agent memory as you discover codepaths, patterns, library

349 locations, and key architectural decisions. This builds up institutional

350 knowledge across conversations. Write concise notes about what you found

351 and where.

352 ```

353

354#### Conditional rules with hooks

355

356For more dynamic control over tool usage, use `PreToolUse` hooks to validate operations before they execute. This is useful when you need to allow some operations of a tool while blocking others.

244 357

358This example creates a subagent that only allows read-only database queries. The `PreToolUse` hook runs the script specified in `command` before each Bash command executes:

359

360```yaml theme={null}

361---

362name: db-reader

363description: Execute read-only database queries

364tools: Bash

365hooks:

366 PreToolUse:

367 - matcher: "Bash"

368 hooks:

369 - type: command

370 command: "./scripts/validate-readonly-query.sh"

371---

245```372```

246> Use the test-runner subagent to fix failing tests373

247> Have the code-reviewer subagent look at my recent changes374Claude Code [passes hook input as JSON](/en/hooks#pretooluse-input) via stdin to hook commands. The validation script reads this JSON, extracts the Bash command, and [exits with code 2](/en/hooks#exit-code-2-behavior-per-event) to block write operations:

248> Ask the debugger subagent to investigate this error375

376```bash theme={null}

377#!/bin/bash

378# ./scripts/validate-readonly-query.sh

379

380INPUT=$(cat)

381COMMAND=$(echo "$INPUT" | jq -r '.tool_input.command // empty')

382

383# Block SQL write operations (case-insensitive)

385 echo "Blocked: Only SELECT queries are allowed" >&2

386 exit 2

387fi

388

389exit 0

249```390```

250 391

251## Built-in subagents392See [Hook input](/en/hooks#pretooluse-input) for the complete input schema and [exit codes](/en/hooks#exit-code-output) for how exit codes affect behavior.

393

394#### Disable specific subagents

395

396You can prevent Claude from using specific subagents by adding them to the `deny` array in your [settings](/en/settings#permission-settings). Use the format `Task(subagent-name)` where `subagent-name` matches the subagent's name field.

397

398```json theme={null}

399{

400 "permissions": {

401 "deny": ["Task(Explore)", "Task(my-custom-agent)"]

402 }

403}

404```

405

406This works for both built-in and custom subagents. You can also use the `--disallowedTools` CLI flag:

407

408```bash theme={null}

409claude --disallowedTools "Task(Explore)"

410```

411

412See [Permissions documentation](/en/permissions#tool-specific-permission-rules) for more details on permission rules.

413

414### Define hooks for subagents

415

416Subagents can define [hooks](/en/hooks) that run during the subagent's lifecycle. There are two ways to configure hooks:

417

4181. **In the subagent's frontmatter**: Define hooks that run only while that subagent is active

4192. **In `settings.json`**: Define hooks that run in the main session when subagents start or stop

420

421#### Hooks in subagent frontmatter

252 422

253Claude Code includes built-in subagents that are available out of the box:423Define hooks directly in the subagent's markdown file. These hooks only run while that specific subagent is active and are cleaned up when it finishes.

254 424

255### General-purpose subagent425All [hook events](/en/hooks#hook-events) are supported. The most common events for subagents are:

256 426

257The general-purpose subagent is a capable agent for complex, multi-step tasks that require both exploration and action. Unlike the Explore subagent, it can modify files and execute a wider range of operations.427| Event | Matcher input | When it fires |

428| :------------ | :------------ | :------------------------------------------------------------------ |

429| `PreToolUse` | Tool name | Before the subagent uses a tool |

430| `PostToolUse` | Tool name | After the subagent uses a tool |

431| `Stop` | (none) | When the subagent finishes (converted to `SubagentStop` at runtime) |

258 432

259**Key characteristics:**433This example validates Bash commands with the `PreToolUse` hook and runs a linter after file edits with `PostToolUse`:

260 434

261* **Model**: Uses Sonnet for more capable reasoning435```yaml theme={null}

262* **Tools**: Has access to all tools436---

263* **Mode**: Can read and write files, execute commands, make changes437name: code-reviewer

264* **Purpose**: Complex research tasks, multi-step operations, code modifications438description: Review code changes with automatic linting

439hooks:

440 PreToolUse:

441 - matcher: "Bash"

442 hooks:

443 - type: command

444 command: "./scripts/validate-command.sh $TOOL_INPUT"

445 PostToolUse:

446 - matcher: "Edit|Write"

447 hooks:

448 - type: command

449 command: "./scripts/run-linter.sh"

450---

451```

452

453`Stop` hooks in frontmatter are automatically converted to `SubagentStop` events.

265 454

266**When Claude uses it:**455#### Project-level hooks for subagent events

267 456

268Claude delegates to the general-purpose subagent when:457Configure hooks in `settings.json` that respond to subagent lifecycle events in the main session.

269 458

270* The task requires both exploration and modification459| Event | Matcher input | When it fires |

271* Complex reasoning is needed to interpret search results460| :-------------- | :-------------- | :------------------------------- |

272* Multiple strategies may be needed if initial searches fail461| `SubagentStart` | Agent type name | When a subagent begins execution |

273* The task has multiple steps that depend on each other462| `SubagentStop` | Agent type name | When a subagent completes |

274 463

275**Example scenario:**464Both events support matchers to target specific agent types by name. This example runs a setup script only when the `db-agent` subagent starts, and a cleanup script when any subagent stops:

276 465

466```json theme={null}

467{

468 "hooks": {

469 "SubagentStart": [

470 {

471 "matcher": "db-agent",

472 "hooks": [

473 { "type": "command", "command": "./scripts/setup-db-connection.sh" }

474 ]

475 }

476 ],

477 "SubagentStop": [

478 {

479 "hooks": [

480 { "type": "command", "command": "./scripts/cleanup-db-connection.sh" }

481 ]

482 }

483 ]

484 }

485}

277```486```

278User: Find all the places where we handle authentication and update them to use the new token format

279 487

280Claude: [Invokes general-purpose subagent]488See [Hooks](/en/hooks) for the complete hook configuration format.

281[Agent searches for auth-related code across codebase]489

282[Agent reads and analyzes multiple files]490## Work with subagents

283[Agent makes necessary edits]491

284[Returns detailed writeup of changes made]492### Understand automatic delegation

493

494Claude automatically delegates tasks based on the task description in your request, the `description` field in subagent configurations, and current context. To encourage proactive delegation, include phrases like "use proactively" in your subagent's description field.

495

496You can also request a specific subagent explicitly:

497

285```498```

499Use the test-runner subagent to fix failing tests

500Have the code-reviewer subagent look at my recent changes

501```

502

503### Run subagents in foreground or background

504

505Subagents can run in the foreground (blocking) or background (concurrent):

286 506

287### Plan subagent507* **Foreground subagents** block the main conversation until complete. Permission prompts and clarifying questions (like [`AskUserQuestion`](/en/settings#tools-available-to-claude)) are passed through to you.

508* **Background subagents** run concurrently while you continue working. Before launching, Claude Code prompts for any tool permissions the subagent will need, ensuring it has the necessary approvals upfront. Once running, the subagent inherits these permissions and auto-denies anything not pre-approved. If a background subagent needs to ask clarifying questions, that tool call fails but the subagent continues. MCP tools are not available in background subagents.

288 509

289The Plan subagent is a specialized built-in agent designed for use during plan mode. When Claude is operating in plan mode (non-execution mode), it uses the Plan subagent to conduct research and gather information about your codebase before presenting a plan.510If a background subagent fails due to missing permissions, you can [resume it](#resume-subagents) in the foreground to retry with interactive prompts.

290 511

291**Key characteristics:**512Claude decides whether to run subagents in the foreground or background based on the task. You can also:

292 513

293* **Model**: Uses Sonnet for more capable analysis514* Ask Claude to "run this in the background"

294* **Tools**: Has access to Read, Glob, Grep, and Bash tools for codebase exploration515* Press **Ctrl+B** to background a running task

295* **Purpose**: Searches files, analyzes code structure, and gathers context

296* **Automatic invocation**: Claude automatically uses this agent when in plan mode and needs to research the codebase

297 516

298**How it works:**517To disable all background task functionality, set the `CLAUDE_CODE_DISABLE_BACKGROUND_TASKS` environment variable to `1`. See [Environment variables](/en/settings#environment-variables).

299When you're in plan mode and Claude needs to understand your codebase to create a plan, it delegates research tasks to the Plan subagent. This prevents infinite nesting of agents (subagents cannot spawn other subagents) while still allowing Claude to gather the necessary context.

300 518

301**Example scenario:**519### Common patterns

302 520

521#### Isolate high-volume operations

522

523One of the most effective uses for subagents is isolating operations that produce large amounts of output. Running tests, fetching documentation, or processing log files can consume significant context. By delegating these to a subagent, the verbose output stays in the subagent's context while only the relevant summary returns to your main conversation.

524

525```

526Use a subagent to run the test suite and report only the failing tests with their error messages

303```527```

304User: [In plan mode] Help me refactor the authentication module

305 528

306Claude: Let me research your authentication implementation first...529#### Run parallel research

307[Internally invokes Plan subagent to explore auth-related files]530

308[Plan subagent searches codebase and returns findings]531For independent investigations, spawn multiple subagents to work simultaneously:

309Claude: Based on my research, here's my proposed plan...532

533```

534Research the authentication, database, and API modules in parallel using separate subagents

310```535```

311 536

312<Tip>537Each subagent explores its area independently, then Claude synthesizes the findings. This works best when the research paths don't depend on each other.

313 The Plan subagent is only used in plan mode. In normal execution mode, Claude uses the general-purpose agent or other custom subagents you've created.

314</Tip>

315 538

316### Explore subagent539<Warning>

540 When subagents complete, their results return to your main conversation. Running many subagents that each return detailed results can consume significant context.

541</Warning>

317 542

318The Explore subagent is a fast, lightweight agent optimized for searching and analyzing codebases. It operates in strict read-only mode and is designed for rapid file discovery and code exploration.543For tasks that need sustained parallelism or exceed your context window, [agent teams](/en/agent-teams) give each worker its own independent context.

319 544

320**Key characteristics:**545#### Chain subagents

321 546

322* **Model**: Uses Haiku for fast, low-latency searches547For multi-step workflows, ask Claude to use subagents in sequence. Each subagent completes its task and returns results to Claude, which then passes relevant context to the next subagent.

323* **Mode**: Strictly read-only - cannot create, modify, or delete files

324* **Tools available**:

325 * Glob - File pattern matching

326 * Grep - Content searching with regular expressions

327 * Read - Reading file contents

328 * Bash - Read-only commands only (ls, git status, git log, git diff, find, cat, head, tail)

329 548

330**When Claude uses it:**549```

550Use the code-reviewer subagent to find performance issues, then use the optimizer subagent to fix them

551```

331 552

332Claude will delegate to the Explore subagent when it needs to search or understand a codebase but doesn't need to make changes. This is more efficient than the main agent running multiple search commands directly, as content found during the exploration process doesn't bloat the main conversation.553### Choose between subagents and main conversation

333 554

334**Thoroughness levels:**555Use the **main conversation** when:

335 556

336When invoking the Explore subagent, Claude specifies a thoroughness level:557* The task needs frequent back-and-forth or iterative refinement

558* Multiple phases share significant context (planning → implementation → testing)

559* You're making a quick, targeted change

560* Latency matters. Subagents start fresh and may need time to gather context

337 561

338* **Quick** - Fast searches with minimal exploration. Good for targeted lookups.562Use **subagents** when:

339* **Medium** - Moderate exploration. Balances speed and thoroughness.

340* **Very thorough** - Comprehensive analysis across multiple locations and naming conventions. Used when the target might be in unexpected places.

341 563

342**Example scenarios:**564* The task produces verbose output you don't need in your main context

565* You want to enforce specific tool restrictions or permissions

566* The work is self-contained and can return a summary

343 567

344```568Consider [Skills](/en/skills) instead when you want reusable prompts or workflows that run in the main conversation context rather than isolated subagent context.

345User: Where are errors from the client handled?569

570<Note>

571 Subagents cannot spawn other subagents. If your workflow requires nested delegation, use [Skills](/en/skills) or [chain subagents](#chain-subagents) from the main conversation.

572</Note>

573

574### Manage subagent context

575

576#### Resume subagents

577

578Each subagent invocation creates a new instance with fresh context. To continue an existing subagent's work instead of starting over, ask Claude to resume it.

579

580Resumed subagents retain their full conversation history, including all previous tool calls, results, and reasoning. The subagent picks up exactly where it stopped rather than starting fresh.

581

582When a subagent completes, Claude receives its agent ID. To resume a subagent, ask Claude to continue the previous work:

346 583

347Claude: [Invokes Explore subagent with "medium" thoroughness]

348[Explore uses Grep to search for error handling patterns]

349[Explore uses Read to examine promising files]

350[Returns findings with absolute file paths]

351Claude: Client errors are handled in src/services/process.ts:712...

352```584```

585Use the code-reviewer subagent to review the authentication module

586[Agent completes]

353 587

588Continue that code review and now analyze the authorization logic

589[Claude resumes the subagent with full context from previous conversation]

354```590```

355User: What's the codebase structure?

356 591

357Claude: [Invokes Explore subagent with "quick" thoroughness]592You can also ask Claude for the agent ID if you want to reference it explicitly, or find IDs in the transcript files at `~/.claude/projects/{project}/{sessionId}/subagents/`. Each transcript is stored as `agent-{agentId}.jsonl`.

358[Explore uses Glob and ls to map directory structure]593

359[Returns overview of key directories and their purposes]594Subagent transcripts persist independently of the main conversation:

595

596* **Main conversation compaction**: When the main conversation compacts, subagent transcripts are unaffected. They're stored in separate files.

597* **Session persistence**: Subagent transcripts persist within their session. You can [resume a subagent](#resume-subagents) after restarting Claude Code by resuming the same session.

598* **Automatic cleanup**: Transcripts are cleaned up based on the `cleanupPeriodDays` setting (default: 30 days).

599

600#### Auto-compaction

601

602Subagents support automatic compaction using the same logic as the main conversation. By default, auto-compaction triggers at approximately 95% capacity. To trigger compaction earlier, set `CLAUDE_AUTOCOMPACT_PCT_OVERRIDE` to a lower percentage (for example, `50`). See [environment variables](/en/settings#environment-variables) for details.

603

604Compaction events are logged in subagent transcript files:

605

606```json theme={null}

607{

608 "type": "system",

609 "subtype": "compact_boundary",

610 "compactMetadata": {

611 "trigger": "auto",

612 "preTokens": 167189

613 }

614}

360```615```

361 616

617The `preTokens` value shows how many tokens were used before compaction occurred.

618

362## Example subagents619## Example subagents

363 620

621These examples demonstrate effective patterns for building subagents. Use them as starting points, or generate a customized version with Claude.

622

623<Tip>

624 **Best practices:**

625

626 * **Design focused subagents:** each subagent should excel at one specific task

627 * **Write detailed descriptions:** Claude uses the description to decide when to delegate

628 * **Limit tool access:** grant only necessary permissions for security and focus

629 * **Check into version control:** share project subagents with your team

630</Tip>

631

364### Code reviewer632### Code reviewer

365 633

634A read-only subagent that reviews code without modifying it. This example shows how to design a focused subagent with limited tool access (no Edit or Write) and a detailed prompt that specifies exactly what to look for and how to format output.

635

366```markdown theme={null}636```markdown theme={null}

367---637---

368name: code-reviewer638name: code-reviewer

399 668

400### Debugger669### Debugger

401 670

671A subagent that can both analyze and fix issues. Unlike the code reviewer, this one includes Edit because fixing bugs requires modifying code. The prompt provides a clear workflow from diagnosis to verification.

672

402```markdown theme={null}673```markdown theme={null}

403---674---

404name: debugger675name: debugger

434 705

435### Data scientist706### Data scientist

436 707

708A domain-specific subagent for data analysis work. This example shows how to create subagents for specialized workflows outside of typical coding tasks. It explicitly sets `model: sonnet` for more capable analysis.

709

437```markdown theme={null}710```markdown theme={null}

438---711---

439name: data-scientist712name: data-scientist

467Always ensure queries are efficient and cost-effective.740Always ensure queries are efficient and cost-effective.

468```741```

469 742

470## Best practices743### Database query validator

~~471~~

472* **Start with Claude-generated agents**: We highly recommend generating your initial subagent with Claude and then iterating on it to make it personally yours. This approach gives you the best results - a solid foundation that you can customize to your specific needs.

~~473~~

474* **Design focused subagents**: Create subagents with single, clear responsibilities rather than trying to make one subagent do everything. This improves performance and makes subagents more predictable.

~~475~~

476* **Write detailed prompts**: Include specific instructions, examples, and constraints in your system prompts. The more guidance you provide, the better the subagent will perform.

~~477~~

478* **Limit tool access**: Only grant tools that are necessary for the subagent's purpose. This improves security and helps the subagent focus on relevant actions.

479 744

480* **Version control**: Check project subagents into version control so your team can benefit from and improve them collaboratively.745A subagent that allows Bash access but validates commands to permit only read-only SQL queries. This example shows how to use `PreToolUse` hooks for conditional validation when you need finer control than the `tools` field provides.

481 746

482## Advanced usage747```markdown theme={null}

748---

749name: db-reader

750description: Execute read-only database queries. Use when analyzing data or generating reports.

751tools: Bash

752hooks:

753 PreToolUse:

754 - matcher: "Bash"

755 hooks:

756 - type: command

757 command: "./scripts/validate-readonly-query.sh"

758---

483 759

484### Chaining subagents760You are a database analyst with read-only access. Execute SELECT queries to answer questions about the data.

485 761

486For complex workflows, you can chain multiple subagents:762When asked to analyze data:

7631. Identify which tables contain the relevant data

7642. Write efficient SELECT queries with appropriate filters

7653. Present results clearly with context

487 766

767You cannot modify data. If asked to INSERT, UPDATE, DELETE, or modify schema, explain that you only have read access.

488```768```

489> First use the code-analyzer subagent to find performance issues, then use the optimizer subagent to fix them

490```

~~491~~

492### Dynamic subagent selection

493 769

494Claude Code intelligently selects subagents based on context. Make your `description` fields specific and action-oriented for best results.770Claude Code [passes hook input as JSON](/en/hooks#pretooluse-input) via stdin to hook commands. The validation script reads this JSON, extracts the command being executed, and checks it against a list of SQL write operations. If a write operation is detected, the script [exits with code 2](/en/hooks#exit-code-2-behavior-per-event) to block execution and returns an error message to Claude via stderr.

495 771

496### Resumable subagents772Create the validation script anywhere in your project. The path must match the `command` field in your hook configuration:

497 773

498Subagents can be resumed to continue previous conversations, which is particularly useful for long-running research or analysis tasks that need to be continued across multiple invocations.774```bash theme={null}

~~499~~ 775#!/bin/bash

500**How it works:**776# Blocks SQL write operations, allows SELECT queries

~~501~~

502* Each subagent execution is assigned a unique `agentId`

503* The agent's conversation is stored in a separate transcript file: `agent-{agentId}.jsonl`

504* You can resume a previous agent by providing its `agentId` via the `resume` parameter

505* When resumed, the agent continues with full context from its previous conversation

~~506~~

507**Example workflow:**

~~508~~

509Initial invocation:

510 777

511```778# Read JSON input from stdin

512> Use the code-analyzer agent to start reviewing the authentication module779INPUT=$(cat)

513 780

514[Agent completes initial analysis and returns agentId: "abc123"]781# Extract the command field from tool_input using jq

515```782COMMAND=$(echo "$INPUT" | jq -r '.tool_input.command // empty')

516 783

517Resume the agent:784if [ -z "$COMMAND" ]; then

785 exit 0

786fi

518 787

519```788# Block write operations (case-insensitive)

790 echo "Blocked: Write operations not allowed. Use SELECT queries only." >&2

791 exit 2

792fi

521 793

522[Agent continues with full context from previous conversation]794exit 0

523```795```

524 796

525**Use cases:**797Make the script executable:

~~526~~

527* **Long-running research**: Break down large codebase analysis into multiple sessions

528* **Iterative refinement**: Continue refining a subagent's work without losing context

529* **Multi-step workflows**: Have a subagent work on related tasks sequentially while maintaining context

~~530~~

531**Technical details:**

~~532~~

533* Agent transcripts are stored in your project directory

534* Recording is disabled during resume to avoid duplicating messages

535* Both synchronous and asynchronous agents can be resumed

536* The `resume` parameter accepts the agent ID from a previous execution

~~537~~

538**Programmatic usage:**

539 798

540If you're using the Agent SDK or interacting with the AgentTool directly, you can pass the `resume` parameter:799```bash theme={null}

~~541~~ 800chmod +x ./scripts/validate-readonly-query.sh

542```typescript theme={null}

543{

544 "description": "Continue analysis",

545 "prompt": "Now examine the error handling patterns",

546 "subagent_type": "code-analyzer",

547 "resume": "abc123" // Agent ID from previous execution

548}

549```801```

550 802

551<Tip>803The hook receives JSON via stdin with the Bash command in `tool_input.command`. Exit code 2 blocks the operation and feeds the error message back to Claude. See [Hooks](/en/hooks#exit-code-output) for details on exit codes and [Hook input](/en/hooks#pretooluse-input) for the complete input schema.

552 Keep track of agent IDs for tasks you may want to resume later. Claude Code displays the agent ID when a subagent completes its work.

553</Tip>

554 804

555## Performance considerations805## Next steps

556 806

557* **Context efficiency**: Agents help preserve main context, enabling longer overall sessions807Now that you understand subagents, explore these related features:

558* **Latency**: Subagents start off with a clean slate each time they are invoked and may add latency as they gather context that they require to do their job effectively.

~~559~~

560## Related documentation

~~561~~

562* [Plugins](/en/plugins) - Extend Claude Code with custom agents through plugins

563* [Slash commands](/en/slash-commands) - Learn about other built-in commands

564* [Settings](/en/settings) - Configure Claude Code behavior

565* [Hooks](/en/hooks) - Automate workflows with event handlers

~~566~~

~~567~~

568 808

569> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt809* [Distribute subagents with plugins](/en/plugins) to share subagents across teams or projects

810* [Run Claude Code programmatically](/en/headless) with the Agent SDK for CI/CD and automation

811* [Use MCP servers](/en/mcp) to give subagents access to external tools and data

terminal-config.md +19 −8

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Optimize your terminal setup5# Optimize your terminal setup

2 6

3> Claude Code works best when your terminal is properly configured. Follow these guidelines to optimize your experience.7> Claude Code works best when your terminal is properly configured. Follow these guidelines to optimize your experience.

13You have several options for entering line breaks into Claude Code:17You have several options for entering line breaks into Claude Code:

14 18

15* **Quick escape**: Type `\` followed by Enter to create a newline19* **Quick escape**: Type `\` followed by Enter to create a newline

~~16* **Keyboard shortcut**: Set up a keybinding to insert a newline~~20* **Shift+Enter**: Works out of the box in iTerm2, WezTerm, Ghostty, and Kitty

21* **Keyboard shortcut**: Set up a keybinding to insert a newline in other terminals

23**Set up Shift+Enter for other terminals**

17 24

~~18#### Set up Shift+Enter (VS Code or iTerm2):~~25Run `/terminal-setup` within Claude Code to automatically configure Shift+Enter for VS Code, Alacritty, Zed, and Warp.

19 26

~~20Run `/terminal-setup` within Claude Code to automatically configure Shift+Enter.~~27<Note>

28 The `/terminal-setup` command is only visible in terminals that require manual configuration. If you're using iTerm2, WezTerm, Ghostty, or Kitty, you won't see this command because Shift+Enter already works natively.

29</Note>

21 30

~~22#### Set up Option+Enter (VS Code, iTerm2 or macOS Terminal.app):~~31**Set up Option+Enter (VS Code, iTerm2 or macOS Terminal.app)**

23 32

24**For Mac Terminal.app:**33**For Mac Terminal.app:**

25 34

65The supported subset includes:74The supported subset includes:

66 75

67* Mode switching: `Esc` (to NORMAL), `i`/`I`, `a`/`A`, `o`/`O` (to INSERT)76* Mode switching: `Esc` (to NORMAL), `i`/`I`, `a`/`A`, `o`/`O` (to INSERT)

~~68* Navigation: `h`/`j`/`k`/`l`, `w`/`e`/`b`, `0`/`$`/`^`, `gg`/`G`~~77* Navigation: `h`/`j`/`k`/`l`, `w`/`e`/`b`, `0`/`$`/`^`, `gg`/`G`, `f`/`F`/`t`/`T` with `;`/`,` repeat

69* Editing: `x`, `dw`/`de`/`db`/`dd`/`D`, `cw`/`ce`/`cb`/`cc`/`C`, `.` (repeat)78* Editing: `x`, `dw`/`de`/`db`/`dd`/`D`, `cw`/`ce`/`cb`/`cc`/`C`, `.` (repeat)

79* Yank/paste: `yy`/`Y`, `yw`/`ye`/`yb`, `p`/`P`

80* Text objects: `iw`/`aw`, `iW`/`aW`, `i"`/`a"`, `i'`/`a'`, `i(`/`a(`, `i[`/`a[`, `i{`/`a{`

81* Indentation: `>>`/`<<`

82* Line operations: `J` (join lines)

70 83

71 84See [Interactive mode](/en/interactive-mode#vim-editor-mode) for the complete reference.

~~73> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt~~

third-party-integrations.md +147 −153

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Enterprise deployment overview5# Enterprise deployment overview

2 6

3> Learn how Claude Code can integrate with various third-party services and infrastructure to meet enterprise deployment requirements.7> Learn how Claude Code can integrate with various third-party services and infrastructure to meet enterprise deployment requirements.

4 8

~~5This page provides an overview of available deployment options and helps you choose the right configuration for your organization.~~9Organizations can deploy Claude Code through Anthropic directly or through a cloud provider. This page helps you choose the right configuration.

11## Compare deployment options

13For most organizations, Claude for Teams or Claude for Enterprise provides the best experience. Team members get access to both Claude Code and Claude on the web with a single subscription, centralized billing, and no infrastructure setup required.

15**Claude for Teams** is self-service and includes collaboration features, admin tools, and billing management. Best for smaller teams that need to get started quickly.

17**Claude for Enterprise** adds SSO and domain capture, role-based permissions, compliance API access, and managed policy settings for deploying organization-wide Claude Code configurations. Best for larger organizations with security and compliance requirements.

19Learn more about [Team plans](https://support.claude.com/en/articles/9266767-what-is-the-team-plan) and [Enterprise plans](https://support.claude.com/en/articles/9797531-what-is-the-enterprise-plan).

6 20

~~7## Provider comparison~~21If your organization has specific infrastructure requirements, compare the options below:

8 22

9<table>23<table>

10 <thead>24 <thead>

11 <tr>25 <tr>

12 <th>Feature</th>26 <th>Feature</th>

~~13 <th>Anthropic</th>~~27 <th>Claude for Teams/Enterprise</th>

28 <th>Anthropic Console</th>

14 <th>Amazon Bedrock</th>29 <th>Amazon Bedrock</th>

15 <th>Google Vertex AI</th>30 <th>Google Vertex AI</th>

16 <th>Microsoft Foundry</th>31 <th>Microsoft Foundry</th>

18 </thead>33 </thead>

19 34

20 <tbody>35 <tbody>

36 <tr>

37 <td>Best for</td>

38 <td>Most organizations (recommended)</td>

39 <td>Individual developers</td>

40 <td>AWS-native deployments</td>

41 <td>GCP-native deployments</td>

42 <td>Azure-native deployments</td>

43 </tr>

45 <tr>

46 <td>Billing</td>

47 <td><strong>Teams:</strong> \$150/seat (Premium) with PAYG available<br /><strong>Enterprise:</strong> <a href="https://claude.com/contact-sales">Contact Sales</a></td>

48 <td>PAYG</td>

49 <td>PAYG through AWS</td>

50 <td>PAYG through GCP</td>

51 <td>PAYG through Azure</td>

52 </tr>

21 <tr>54 <tr>

22 <td>Regions</td>55 <td>Regions</td>

23 <td>Supported [countries](https://www.anthropic.com/supported-countries)</td>56 <td>Supported [countries](https://www.anthropic.com/supported-countries)</td>

57 <td>Supported [countries](https://www.anthropic.com/supported-countries)</td>

24 <td>Multiple AWS [regions](https://docs.aws.amazon.com/bedrock/latest/userguide/models-regions.html)</td>58 <td>Multiple AWS [regions](https://docs.aws.amazon.com/bedrock/latest/userguide/models-regions.html)</td>

25 <td>Multiple GCP [regions](https://cloud.google.com/vertex-ai/generative-ai/docs/learn/locations)</td>59 <td>Multiple GCP [regions](https://cloud.google.com/vertex-ai/generative-ai/docs/learn/locations)</td>

26 <td>Multiple Azure [regions](https://azure.microsoft.com/en-us/explore/global-infrastructure/products-by-region/)</td>60 <td>Multiple Azure [regions](https://azure.microsoft.com/en-us/explore/global-infrastructure/products-by-region/)</td>

32 <td>Enabled by default</td>66 <td>Enabled by default</td>

33 <td>Enabled by default</td>67 <td>Enabled by default</td>

34 <td>Enabled by default</td>68 <td>Enabled by default</td>

69 <td>Enabled by default</td>

35 </tr>70 </tr>

36 71

37 <tr>72 <tr>

38 <td>Authentication</td>73 <td>Authentication</td>

74 <td>Claude.ai SSO or email</td>

39 <td>API key</td>75 <td>API key</td>

40 <td>API key or AWS credentials</td>76 <td>API key or AWS credentials</td>

41 <td>GCP credentials</td>77 <td>GCP credentials</td>

44 80

45 <tr>81 <tr>

46 <td>Cost tracking</td>82 <td>Cost tracking</td>

~~47 <td>Dashboard</td>~~83 <td>Usage dashboard</td>

84 <td>Usage dashboard</td>

48 <td>AWS Cost Explorer</td>85 <td>AWS Cost Explorer</td>

49 <td>GCP Billing</td>86 <td>GCP Billing</td>

50 <td>Azure Cost Management</td>87 <td>Azure Cost Management</td>

51 </tr>88 </tr>

52 89

90 <tr>

91 <td>Includes Claude on web</td>

92 <td>Yes</td>

93 <td>No</td>

94 <td>No</td>

95 <td>No</td>

96 <td>No</td>

97 </tr>

53 <tr>99 <tr>

54 <td>Enterprise features</td>100 <td>Enterprise features</td>

~~55 <td>Teams, usage monitoring</td>~~101 <td>Team management, SSO, usage monitoring</td>

102 <td>None</td>

56 <td>IAM policies, CloudTrail</td>103 <td>IAM policies, CloudTrail</td>

57 <td>IAM roles, Cloud Audit Logs</td>104 <td>IAM roles, Cloud Audit Logs</td>

58 <td>RBAC policies, Azure Monitor</td>105 <td>RBAC policies, Azure Monitor</td>

60 </tbody>107 </tbody>

61</table>108</table>

62 109

~~63## Cloud providers~~110Select a deployment option to view setup instructions:

~~65<CardGroup cols={3}>~~

~~66 <Card title="Amazon Bedrock" icon="aws" href="/en/amazon-bedrock">~~

~~67 Use Claude models through AWS infrastructure with API key or IAM-based authentication and AWS-native monitoring~~

~~68 </Card>~~

~~70 <Card title="Google Vertex AI" icon="google" href="/en/google-vertex-ai">~~

~~71 Access Claude models via Google Cloud Platform with enterprise-grade security and compliance~~

~~72 </Card>~~

~~74 <Card title="Microsoft Foundry" icon="microsoft" href="/en/microsoft-foundry">~~

~~75 Access Claude through Azure with API key or Microsoft Entra ID authentication and Azure billing~~

~~76 </Card>~~

~~77</CardGroup>~~

~~79## Corporate infrastructure~~

~~81<CardGroup cols={2}>~~

~~82 <Card title="Enterprise Network" icon="shield" href="/en/network-config">~~

~~83 Configure Claude Code to work with your organization's proxy servers and SSL/TLS requirements~~

~~84 </Card>~~

85 111

~~86 <Card title="LLM Gateway" icon="server" href="/en/llm-gateway">~~112* [Claude for Teams or Enterprise](/en/authentication#claude-for-teams-or-enterprise)

~~87 Deploy centralized model access with usage tracking, budgeting, and audit logging~~113* [Anthropic Console](/en/authentication#claude-console-authentication)

~~88 </Card>~~114* [Amazon Bedrock](/en/amazon-bedrock)

~~89</CardGroup>~~115* [Google Vertex AI](/en/google-vertex-ai)

116* [Microsoft Foundry](/en/microsoft-foundry)

90 117

~~91## Configuration overview~~118## Configure proxies and gateways

92 119

~~93Claude Code supports flexible configuration options that allow you to combine different providers and infrastructure:~~120Most organizations can use a cloud provider directly without additional configuration. However, you may need to configure a corporate proxy or LLM gateway if your organization has specific network or management requirements. These are different configurations that can be used together:

94 121

~~95<Note>~~122* **Corporate proxy**: Routes traffic through an HTTP/HTTPS proxy. Use this if your organization requires all outbound traffic to pass through a proxy server for security monitoring, compliance, or network policy enforcement. Configure with the `HTTPS_PROXY` or `HTTP_PROXY` environment variables. Learn more in [Enterprise network configuration](/en/network-config).

~~96 Understand the difference between:~~123* **LLM Gateway**: A service that sits between Claude Code and the cloud provider to handle authentication and routing. Use this if you need centralized usage tracking across teams, custom rate limiting or budgets, or centralized authentication management. Configure with the `ANTHROPIC_BASE_URL`, `ANTHROPIC_BEDROCK_BASE_URL`, or `ANTHROPIC_VERTEX_BASE_URL` environment variables. Learn more in [LLM gateway configuration](/en/llm-gateway).

97 124

~~98 * **Corporate proxy**: An HTTP/HTTPS proxy for routing traffic (set via `HTTPS_PROXY` or `HTTP_PROXY`)~~125The following examples show the environment variables to set in your shell or shell profile (`.bashrc`, `.zshrc`). See [Settings](/en/settings) for other configuration methods.

~~99 * **LLM Gateway**: A service that handles authentication and provides provider-compatible endpoints (set via `ANTHROPIC_BASE_URL`, `ANTHROPIC_BEDROCK_BASE_URL`, or `ANTHROPIC_VERTEX_BASE_URL`)~~

100 126

101 Both configurations can be used in tandem.127### Amazon Bedrock

102</Note>

103 128

104### Using Bedrock with corporate proxy129<Tabs>

130 <Tab title="Corporate proxy">

131 Route Bedrock traffic through your corporate proxy by setting the following [environment variables](/en/settings#environment-variables):

105 132

106Route Bedrock traffic through a corporate HTTP/HTTPS proxy:133 ```bash theme={null}

134 # Enable Bedrock

135 export CLAUDE_CODE_USE_BEDROCK=1

136 export AWS_REGION=us-east-1

107 137

108```bash theme={null}138 # Configure corporate proxy

109# Enable Bedrock139 export HTTPS_PROXY='https://proxy.example.com:8080'

110export CLAUDE_CODE_USE_BEDROCK=1140 ```

111export AWS_REGION=us-east-1141 </Tab>

112 142

113# Configure corporate proxy143 <Tab title="LLM Gateway">

114export HTTPS_PROXY='https://proxy.example.com:8080'144 Route Bedrock traffic through your LLM gateway by setting the following [environment variables](/en/settings#environment-variables):

115```

116 145

117### Using Bedrock with LLM Gateway146 ```bash theme={null}

147 # Enable Bedrock

148 export CLAUDE_CODE_USE_BEDROCK=1

118 149

119Use a gateway service that provides Bedrock-compatible endpoints:150 # Configure LLM gateway

151 export ANTHROPIC_BEDROCK_BASE_URL='https://your-llm-gateway.com/bedrock'

152 export CLAUDE_CODE_SKIP_BEDROCK_AUTH=1 # If gateway handles AWS auth

153 ```

154 </Tab>

155</Tabs>

120 156

121```bash theme={null}157### Microsoft Foundry

122# Enable Bedrock

123export CLAUDE_CODE_USE_BEDROCK=1

124 158

125# Configure LLM gateway159<Tabs>

126export ANTHROPIC_BEDROCK_BASE_URL='https://your-llm-gateway.com/bedrock'160 <Tab title="Corporate proxy">

127export CLAUDE_CODE_SKIP_BEDROCK_AUTH=1 # If gateway handles AWS auth161 Route Foundry traffic through your corporate proxy by setting the following [environment variables](/en/settings#environment-variables):

128```

129 162

130### Using Foundry with corporate proxy163 ```bash theme={null}

164 # Enable Microsoft Foundry

165 export CLAUDE_CODE_USE_FOUNDRY=1

166 export ANTHROPIC_FOUNDRY_RESOURCE=your-resource

167 export ANTHROPIC_FOUNDRY_API_KEY=your-api-key # Or omit for Entra ID auth

131 168

132Route Azure traffic through a corporate HTTP/HTTPS proxy:169 # Configure corporate proxy

170 export HTTPS_PROXY='https://proxy.example.com:8080'

171 ```

172 </Tab>

133 173

134```bash theme={null}174 <Tab title="LLM Gateway">

135# Enable Microsoft Foundry175 Route Foundry traffic through your LLM gateway by setting the following [environment variables](/en/settings#environment-variables):

136export CLAUDE_CODE_USE_FOUNDRY=1

137export ANTHROPIC_FOUNDRY_RESOURCE=your-resource

138export ANTHROPIC_FOUNDRY_API_KEY=your-api-key # Or omit for Entra ID auth

139 176

140# Configure corporate proxy177 ```bash theme={null}

141export HTTPS_PROXY='https://proxy.example.com:8080'178 # Enable Microsoft Foundry

142```179 export CLAUDE_CODE_USE_FOUNDRY=1

143 180

144### Using Foundry with LLM Gateway181 # Configure LLM gateway

182 export ANTHROPIC_FOUNDRY_BASE_URL='https://your-llm-gateway.com'

183 export CLAUDE_CODE_SKIP_FOUNDRY_AUTH=1 # If gateway handles Azure auth

184 ```

185 </Tab>

186</Tabs>

145 187

146Use a gateway service that provides Azure-compatible endpoints:188### Google Vertex AI

147 189

148```bash theme={null}190<Tabs>

149# Enable Microsoft Foundry191 <Tab title="Corporate proxy">

150export CLAUDE_CODE_USE_FOUNDRY=1192 Route Vertex AI traffic through your corporate proxy by setting the following [environment variables](/en/settings#environment-variables):

151 193

152# Configure LLM gateway194 ```bash theme={null}

153export ANTHROPIC_FOUNDRY_BASE_URL='https://your-llm-gateway.com'195 # Enable Vertex

154export CLAUDE_CODE_SKIP_FOUNDRY_AUTH=1 # If gateway handles Azure auth196 export CLAUDE_CODE_USE_VERTEX=1

155```197 export CLOUD_ML_REGION=us-east5

198 export ANTHROPIC_VERTEX_PROJECT_ID=your-project-id

156 199

157### Using Vertex AI with corporate proxy200 # Configure corporate proxy

201 export HTTPS_PROXY='https://proxy.example.com:8080'

202 ```

203 </Tab>

158 204

159Route Vertex AI traffic through a corporate HTTP/HTTPS proxy:205 <Tab title="LLM Gateway">

206 Route Vertex AI traffic through your LLM gateway by setting the following [environment variables](/en/settings#environment-variables):

160 207

161```bash theme={null}208 ```bash theme={null}

162# Enable Vertex209 # Enable Vertex

163export CLAUDE_CODE_USE_VERTEX=1210 export CLAUDE_CODE_USE_VERTEX=1

164export CLOUD_ML_REGION=us-east5

165export ANTHROPIC_VERTEX_PROJECT_ID=your-project-id

166 211

167# Configure corporate proxy212 # Configure LLM gateway

168export HTTPS_PROXY='https://proxy.example.com:8080'213 export ANTHROPIC_VERTEX_BASE_URL='https://your-llm-gateway.com/vertex'

169```214 export CLAUDE_CODE_SKIP_VERTEX_AUTH=1 # If gateway handles GCP auth

215 ```

216 </Tab>

217</Tabs>

170 218

171### Using Vertex AI with LLM Gateway219<Tip>

~~172~~ 220 Use `/status` in Claude Code to verify your proxy and gateway configuration is applied correctly.

173Combine Google Vertex AI models with an LLM gateway for centralized management:221</Tip>

~~174~~

175```bash theme={null}

176# Enable Vertex

177export CLAUDE_CODE_USE_VERTEX=1

~~178~~

179# Configure LLM gateway

180export ANTHROPIC_VERTEX_BASE_URL='https://your-llm-gateway.com/vertex'

181export CLAUDE_CODE_SKIP_VERTEX_AUTH=1 # If gateway handles GCP auth

182```

~~183~~

184### Authentication configuration

~~185~~

186Claude Code uses the `ANTHROPIC_AUTH_TOKEN` for the `Authorization` header when needed. The `SKIP_AUTH` flags (`CLAUDE_CODE_SKIP_BEDROCK_AUTH`, `CLAUDE_CODE_SKIP_VERTEX_AUTH`) are used in LLM gateway scenarios where the gateway handles provider authentication.

~~187~~

188## Choosing the right deployment configuration

~~189~~

190Consider these factors when selecting your deployment approach:

~~191~~

192### Direct provider access

~~193~~

194Best for organizations that:

~~195~~

196* Want the simplest setup

197* Have existing AWS or GCP infrastructure

198* Need provider-native monitoring and compliance

~~199~~

200### Corporate proxy

~~201~~

202Best for organizations that:

~~203~~

204* Have existing corporate proxy requirements

205* Need traffic monitoring and compliance

206* Must route all traffic through specific network paths

~~207~~

208### LLM Gateway

~~209~~

210Best for organizations that:

~~211~~

212* Need usage tracking across teams

213* Want to dynamically switch between models

214* Require custom rate limiting or budgets

215* Need centralized authentication management

~~216~~

217## Debugging

~~218~~

219When debugging your deployment:

~~220~~

221* Use the `claude /status` [slash command](/en/slash-commands). This command provides observability into any applied authentication, proxy, and URL settings.

222* Set environment variable `export ANTHROPIC_LOG=debug` to log requests.

223 222

224## Best practices for organizations223## Best practices for organizations

225 224

226### 1. Invest in documentation and memory225### Invest in documentation and memory

227 226

228We strongly recommend investing in documentation so that Claude Code understands your codebase. Organizations can deploy CLAUDE.md files at multiple levels:227We strongly recommend investing in documentation so that Claude Code understands your codebase. Organizations can deploy CLAUDE.md files at multiple levels:

229 228

230* **Organization-wide**: Deploy to system directories like `/Library/Application Support/ClaudeCode/CLAUDE.md` (macOS) for company-wide standards229* **Organization-wide**: Deploy to system directories like `/Library/Application Support/ClaudeCode/CLAUDE.md` (macOS) for company-wide standards

231* **Repository-level**: Create `CLAUDE.md` files in repository roots containing project architecture, build commands, and contribution guidelines. Check these into source control so all users benefit230* **Repository-level**: Create `CLAUDE.md` files in repository roots containing project architecture, build commands, and contribution guidelines. Check these into source control so all users benefit

232 231

233 [Learn more](/en/memory).232Learn more in [Memory and CLAUDE.md files](/en/memory).

234 233

235### 2. Simplify deployment234### Simplify deployment

236 235

237If you have a custom development environment, we find that creating a "one click" way to install Claude Code is key to growing adoption across an organization.236If you have a custom development environment, we find that creating a "one click" way to install Claude Code is key to growing adoption across an organization.

238 237

239### 3. Start with guided usage238### Start with guided usage

240 239

241Encourage new users to try Claude Code for codebase Q\&A, or on smaller bug fixes or feature requests. Ask Claude Code to make a plan. Check Claude's suggestions and give feedback if it's off-track. Over time, as users understand this new paradigm better, then they'll be more effective at letting Claude Code run more agentically.240Encourage new users to try Claude Code for codebase Q\&A, or on smaller bug fixes or feature requests. Ask Claude Code to make a plan. Check Claude's suggestions and give feedback if it's off-track. Over time, as users understand this new paradigm better, then they'll be more effective at letting Claude Code run more agentically.

242 241

243### 4. Configure security policies242### Configure security policies

244 243

245Security teams can configure managed permissions for what Claude Code is and is not allowed to do, which cannot be overwritten by local configuration. [Learn more](/en/security).244Security teams can configure managed permissions for what Claude Code is and is not allowed to do, which cannot be overwritten by local configuration. [Learn more](/en/security).

246 245

247### 5. Leverage MCP for integrations246### Leverage MCP for integrations

248 247

249MCP is a great way to give Claude Code more information, such as connecting to ticket management systems or error logs. We recommend that one central team configures MCP servers and checks a `.mcp.json` configuration into the codebase so that all users benefit. [Learn more](/en/mcp).248MCP is a great way to give Claude Code more information, such as connecting to ticket management systems or error logs. We recommend that one central team configures MCP servers and checks a `.mcp.json` configuration into the codebase so that all users benefit. [Learn more](/en/mcp).

250 249

252 251

253## Next steps252## Next steps

254 253

255* [Set up Amazon Bedrock](/en/amazon-bedrock) for AWS-native deployment254Once you've chosen a deployment option and configured access for your team:

256* [Configure Google Vertex AI](/en/google-vertex-ai) for GCP deployment

257* [Set up Microsoft Foundry](/en/microsoft-foundry) for Azure deployment

258* [Configure Enterprise Network](/en/network-config) for network requirements

259* [Deploy LLM Gateway](/en/llm-gateway) for enterprise management

260* [Settings](/en/settings) for configuration options and environment variables

~~261~~

~~262~~

263 255

264> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt2561. **Roll out to your team**: Share installation instructions and have team members [install Claude Code](/en/setup) and authenticate with their credentials.

2572. **Set up shared configuration**: Create a [CLAUDE.md file](/en/memory) in your repositories to help Claude Code understand your codebase and coding standards.

2583. **Configure permissions**: Review [security settings](/en/security) to define what Claude Code can and cannot do in your environment.

troubleshooting.md +80 −16

Details

1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

1# Troubleshooting5# Troubleshooting

2 6

3> Discover solutions to common issues with Claude Code installation and usage.7> Discover solutions to common issues with Claude Code installation and usage.

53 Avoid disabling Windows PATH importing (`appendWindowsPath = false`) as this breaks the ability to call Windows executables from WSL. Similarly, avoid uninstalling Node.js from Windows if you use it for Windows development.57 Avoid disabling Windows PATH importing (`appendWindowsPath = false`) as this breaks the ability to call Windows executables from WSL. Similarly, avoid uninstalling Node.js from Windows if you use it for Windows development.

54</Warning>58</Warning>

55 59

60### WSL2 sandbox setup

62[Sandboxing](/en/sandboxing) is supported on WSL2 but requires installing additional packages. If you see an error like "Sandbox requires socat and bubblewrap" when running `/sandbox`, install the dependencies:

64<Tabs>

65 <Tab title="Ubuntu/Debian">

66 ```bash theme={null}

67 sudo apt-get install bubblewrap socat

68 ```

69 </Tab>

71 <Tab title="Fedora">

72 ```bash theme={null}

73 sudo dnf install bubblewrap socat

74 ```

75 </Tab>

76</Tabs>

78WSL1 does not support sandboxing. If you see "Sandboxing requires WSL2", you need to upgrade to WSL2 or run Claude Code without sandboxing.

56### Linux and Mac installation issues: permission or command not found errors80### Linux and Mac installation issues: permission or command not found errors

57 81

58When installing Claude Code with npm, `PATH` problems may prevent access to `claude`.82When installing Claude Code with npm, `PATH` problems may prevent access to `claude`.

91 115

92```116```

93 117

~~94This command installs the appropriate build of Claude Code for your operating system and architecture and adds a symlink to the installation at `~/.local/bin/claude`.~~118This command installs the appropriate build of Claude Code for your operating system and architecture and adds a symlink to the installation at `~/.local/bin/claude` (or `%USERPROFILE%\.local\bin\claude.exe` on Windows).

95 119

96<Tip>120<Tip>

97 Make sure that you have the installation directory in your system PATH.121 Make sure that you have the installation directory in your system PATH.

98</Tip>122</Tip>

99 123

124### Windows: "Claude Code on Windows requires git-bash"

125

126Claude Code on native Windows requires [Git for Windows](https://git-scm.com/downloads/win) which includes Git Bash. If Git is installed but not detected:

127

1281. Set the path explicitly in PowerShell before running Claude:

129 ```powershell theme={null}

130 $env:CLAUDE_CODE_GIT_BASH_PATH="C:\Program Files\Git\bin\bash.exe"

131 ```

132

1332. Or add it to your system environment variables permanently through System Properties → Environment Variables.

134

135If Git is installed in a non-standard location, adjust the path accordingly.

136

137### Windows: "installMethod is native, but claude command not found"

138

139If you see this error after installation, the `claude` command isn't in your PATH. Add it manually:

140

141<Steps>

142 <Step title="Open Environment Variables">

143 Press `Win + R`, type `sysdm.cpl`, and press Enter. Click **Advanced** → **Environment Variables**.

144 </Step>

145

146 <Step title="Edit User PATH">

147 Under "User variables", select **Path** and click **Edit**. Click **New** and add:

148

149 ```

150 %USERPROFILE%\.local\bin

151 ```

152 </Step>

153

154 <Step title="Restart your terminal">

155 Close and reopen PowerShell or CMD for changes to take effect.

156 </Step>

157</Steps>

158

100Verify installation:159Verify installation:

101 160

102```bash theme={null}161```bash theme={null}

108### Repeated permission prompts167### Repeated permission prompts

109 168

110If you find yourself repeatedly approving the same commands, you can allow specific tools169If you find yourself repeatedly approving the same commands, you can allow specific tools

111to run without approval using the `/permissions` command. See [Permissions docs](/en/iam#configuring-permissions).170to run without approval using the `/permissions` command. See [Permissions docs](/en/permissions#manage-permissions).

112 171

113### Authentication issues172### Authentication issues

114 173

1182. Close Claude Code1772. Close Claude Code

1193. Restart with `claude` and complete the authentication process again1783. Restart with `claude` and complete the authentication process again

120 179

180If the browser doesn't open automatically during login, press `c` to copy the OAuth URL to your clipboard, then paste it into your browser manually.

181

121If problems persist, try:182If problems persist, try:

122 183

123```bash theme={null}184```bash theme={null}

132Claude Code stores configuration in several locations:193Claude Code stores configuration in several locations:

133 194

134| File | Purpose |195| File | Purpose |

135| :---------------------------- | :--------------------------------------------------------------------- |196| :---------------------------- | :------------------------------------------------------- |

143 204

144On Windows, `~` refers to your user home directory, such as `C:\Users\YourName`.205On Windows, `~` refers to your user home directory, such as `C:\Users\YourName`.

145 206

146**Enterprise managed file locations:**207**Managed file locations:**

147 208

148* macOS: `/Library/Application Support/ClaudeCode/`209* macOS: `/Library/Application Support/ClaudeCode/`

149* Linux/WSL: `/etc/claude-code/`210* Linux/WSL: `/etc/claude-code/`

150* Windows: `C:\ProgramData\ClaudeCode\`211* Windows: `C:\Program Files\ClaudeCode\`

151 212

152For details on configuring these files, see [Settings](/en/settings) and [MCP](/en/mcp).213For details on configuring these files, see [Settings](/en/settings) and [MCP](/en/mcp).

153 214

166```227```

167 228

168<Warning>229<Warning>

169 This will remove all your settings, allowed tools, MCP server configurations, and session history.230 This will remove all your settings, MCP server configurations, and session history.

170</Warning>231</Warning>

171 232

172## Performance and stability233## Performance and stability

188 249

189### Search and discovery issues250### Search and discovery issues

190 251

191If Search tool, `@file` mentions, custom agents, and custom slash commands aren't working, install system `ripgrep`:252If Search tool, `@file` mentions, custom agents, and custom skills aren't working, install system `ripgrep`:

192 253

193```bash theme={null}254```bash theme={null}

194# macOS (Homebrew) 255# macOS (Homebrew)

322 383

3231. **Ask Claude to add language tags**: Request "Add appropriate language tags to all code blocks in this markdown file."3841. **Ask Claude to add language tags**: Request "Add appropriate language tags to all code blocks in this markdown file."

324 385

3252. **Use post-processing hooks**: Set up automatic formatting hooks to detect and add missing language tags. See the [markdown formatting hook example](/en/hooks-guide#markdown-formatting-hook) for implementation details.3862. **Use post-processing hooks**: Set up automatic formatting hooks to detect and add missing language tags. See [Auto-format code after edits](/en/hooks-guide#auto-format-code-after-edits) for an example of a PostToolUse formatting hook.

326 387

3273. **Manual verification**: After generating markdown files, review them for proper code block formatting and request corrections if needed.3883. **Manual verification**: After generating markdown files, review them for proper code block formatting and request corrections if needed.

328 389

352 413

3531. Use the `/bug` command within Claude Code to report problems directly to Anthropic4141. Use the `/bug` command within Claude Code to report problems directly to Anthropic

3542. Check the [GitHub repository](https://github.com/anthropics/claude-code) for known issues4152. Check the [GitHub repository](https://github.com/anthropics/claude-code) for known issues

3553. Run `/doctor` to check the health of your Claude Code installation4163. Run `/doctor` to diagnose issues. It checks:

417 * Installation type, version, and search functionality

418 * Auto-update status and available versions

419 * Invalid settings files (malformed JSON, incorrect types)

420 * MCP server configuration errors

421 * Keybinding configuration problems

422 * Context usage warnings (large CLAUDE.md files, high MCP token usage, unreachable permission rules)

423 * Plugin and agent loading errors

3564. Ask Claude directly about its capabilities and features - Claude has built-in access to its documentation4244. Ask Claude directly about its capabilities and features - Claude has built-in access to its documentation

~~357~~

~~358~~

~~359~~

360> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt

vs-code.md +377 −89

Details

~~1# Visual Studio Code~~1> ## Documentation Index

2> Fetch the complete documentation index at: https://code.claude.com/docs/llms.txt

3> Use this file to discover all available pages before exploring further.

2 4

~~3> Use Claude Code with Visual Studio Code through the native extension or CLI integration~~5# Use Claude Code in VS Code

4 6

5<img src="https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/vs-code-extension-interface.jpg?fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=300652d5678c63905e6b0ea9e50835f8" alt="Claude Code VS Code Extension Interface" data-og-width="2500" width="2500" data-og-height="1155" height="1155" data-path="images/vs-code-extension-interface.jpg" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/vs-code-extension-interface.jpg?w=280&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=87630c671517a3d52e9aee627041696e 280w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/vs-code-extension-interface.jpg?w=560&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=716b093879204beec8d952649ef75292 560w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/vs-code-extension-interface.jpg?w=840&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=c1525d1a01513acd9d83d8b5a8fe2fc8 840w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/vs-code-extension-interface.jpg?w=1100&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=1d90021d58bbb51f871efec13af955c3 1100w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/vs-code-extension-interface.jpg?w=1650&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=7babdd25440099886f193cfa99af88ae 1650w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/vs-code-extension-interface.jpg?w=2500&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=08c92eedfb56fe61a61e480fb63784b6 2500w" />7> Install and configure the Claude Code extension for VS Code. Get AI coding assistance with inline diffs, @-mentions, plan review, and keyboard shortcuts.

6 8

~~7## VS Code Extension (Beta)~~9<img src="https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/vs-code-extension-interface.jpg?fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=300652d5678c63905e6b0ea9e50835f8" alt="VS Code editor with the Claude Code extension panel open on the right side, showing a conversation with Claude" data-og-width="2500" width="2500" data-og-height="1155" height="1155" data-path="images/vs-code-extension-interface.jpg" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/vs-code-extension-interface.jpg?w=280&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=87630c671517a3d52e9aee627041696e 280w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/vs-code-extension-interface.jpg?w=560&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=716b093879204beec8d952649ef75292 560w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/vs-code-extension-interface.jpg?w=840&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=c1525d1a01513acd9d83d8b5a8fe2fc8 840w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/vs-code-extension-interface.jpg?w=1100&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=1d90021d58bbb51f871efec13af955c3 1100w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/vs-code-extension-interface.jpg?w=1650&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=7babdd25440099886f193cfa99af88ae 1650w, https://mintcdn.com/claude-code/-YhHHmtSxwr7W8gy/images/vs-code-extension-interface.jpg?w=2500&fit=max&auto=format&n=-YhHHmtSxwr7W8gy&q=85&s=08c92eedfb56fe61a61e480fb63784b6 2500w" />

8 10

9The VS Code extension, available in beta, lets you see Claude's changes in real-time through a native graphical interface integrated directly into your IDE. The VS Code extension makes it easier to access and interact with Claude Code for users who prefer a visual interface over the terminal.11The VS Code extension provides a native graphical interface for Claude Code, integrated directly into your IDE. This is the recommended way to use Claude Code in VS Code.

10 12

~~11### Features~~13With the extension, you can review and edit Claude's plans before accepting them, auto-accept edits as they're made, @-mention files with specific line ranges from your selection, access conversation history, and open multiple conversations in separate tabs or windows.

12 14

~~13The VS Code extension provides:~~15## Prerequisites

14 16

~~15* **Native IDE experience**: Dedicated Claude Code sidebar panel accessed via the Spark icon~~17* VS Code 1.98.0 or higher

~~16* **Plan mode with editing**: Review and edit Claude's plans before accepting them~~18* An Anthropic account (you'll sign in when you first open the extension). If you're using a third-party provider like Amazon Bedrock or Google Vertex AI, see [Use third-party providers](#use-third-party-providers) instead.

~~17* **Auto-accept edits mode**: Automatically apply Claude's changes as they're made~~

~~18* **Extended thinking**: Toggle extended thinking on/off using the Extended Thinking button in the bottom-right corner of the prompt input~~

~~19* **File management**: @-mention files or attach files and images using the system file picker~~

~~20* **MCP server usage**: Use Model Context Protocol servers configured through the CLI~~

~~21* **Conversation history**: Access to past conversations~~

~~22* **Multiple sessions**: Run multiple Claude Code sessions simultaneously~~

~~23* **Keyboard shortcuts**: Support for most shortcuts from the CLI~~

~~24* **Slash commands**: Access most CLI slash commands directly in the extension~~

25 19

~~26### Requirements~~20<Tip>

21 The extension includes the CLI (command-line interface), which you can access from VS Code's integrated terminal for advanced features. See [VS Code extension vs. Claude Code CLI](#vs-code-extension-vs-claude-code-cli) for details.

22</Tip>

27 23

~~28* VS Code 1.98.0 or higher~~24## Install the extension

26Click the link for your IDE to install directly:

28* [Install for VS Code](vscode:extension/anthropic.claude-code)

29* [Install for Cursor](cursor:extension/anthropic.claude-code)

29 30

~~30### Installation~~31Or in VS Code, press `Cmd+Shift+X` (Mac) or `Ctrl+Shift+X` (Windows/Linux) to open the Extensions view, search for "Claude Code", and click **Install**.

31 32

~~32Download and install the extension from the [Visual Studio Code Extension Marketplace](https://marketplace.visualstudio.com/items?itemName=anthropic.claude-code).~~33<Note>If the extension doesn't appear after installation, restart VS Code or run "Developer: Reload Window" from the Command Palette.</Note>

33 34

~~34### How it works~~35## Get started

35 36

36Once installed, you can start using Claude Code through the VS Code interface:37Once installed, you can start using Claude Code through the VS Code interface:

37 38

~~381. Click the Spark icon in your editor's sidebar to open the Claude Code panel~~39<Steps>

~~392. Prompt Claude Code in the same way you would in the terminal~~40 <Step title="Open the Claude Code panel">

~~403. Watch as Claude analyzes your code and suggests changes~~41 Throughout VS Code, the Spark icon indicates Claude Code: <img src="https://mintcdn.com/claude-code/mfM-EyoZGnQv8JTc/images/vs-code-spark-icon.svg?fit=max&auto=format&n=mfM-EyoZGnQv8JTc&q=85&s=a734d84e785140016672f08e0abb236c" alt="Spark icon" style={{display: "inline", height: "0.85em", verticalAlign: "middle"}} data-og-width="16" width="16" data-og-height="16" height="16" data-path="images/vs-code-spark-icon.svg" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/mfM-EyoZGnQv8JTc/images/vs-code-spark-icon.svg?w=280&fit=max&auto=format&n=mfM-EyoZGnQv8JTc&q=85&s=9a45aad9a84b9fa1701ac99a1f9aa4e9 280w, https://mintcdn.com/claude-code/mfM-EyoZGnQv8JTc/images/vs-code-spark-icon.svg?w=560&fit=max&auto=format&n=mfM-EyoZGnQv8JTc&q=85&s=3f4cb9254c4d4e93989c4b6bf9292f4b 560w, https://mintcdn.com/claude-code/mfM-EyoZGnQv8JTc/images/vs-code-spark-icon.svg?w=840&fit=max&auto=format&n=mfM-EyoZGnQv8JTc&q=85&s=e75ccc9faa3e572db8f291ceb65bb264 840w, https://mintcdn.com/claude-code/mfM-EyoZGnQv8JTc/images/vs-code-spark-icon.svg?w=1100&fit=max&auto=format&n=mfM-EyoZGnQv8JTc&q=85&s=f147bd81a381a62539a4ce361fac41c7 1100w, https://mintcdn.com/claude-code/mfM-EyoZGnQv8JTc/images/vs-code-spark-icon.svg?w=1650&fit=max&auto=format&n=mfM-EyoZGnQv8JTc&q=85&s=78fe68efaee5d6e844bbacab1b442ed5 1650w, https://mintcdn.com/claude-code/mfM-EyoZGnQv8JTc/images/vs-code-spark-icon.svg?w=2500&fit=max&auto=format&n=mfM-EyoZGnQv8JTc&q=85&s=efb8dbe1dfa722d094edc6ad2ad4bedb 2500w" />

~~414. Review and accept edits directly in the interface~~42

~~42 * **Tip**: Drag the sidebar wider to see inline diffs, then click them to expand for full details~~43 The quickest way to open Claude is to click the Spark icon in the **Editor Toolbar** (top-right corner of the editor). The icon only appears when you have a file open.

45 <img src="https://mintcdn.com/claude-code/mfM-EyoZGnQv8JTc/images/vs-code-editor-icon.png?fit=max&auto=format&n=mfM-EyoZGnQv8JTc&q=85&s=eb4540325d94664c51776dbbfec4cf02" alt="VS Code editor showing the Spark icon in the Editor Toolbar" data-og-width="2796" width="2796" data-og-height="734" height="734" data-path="images/vs-code-editor-icon.png" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/mfM-EyoZGnQv8JTc/images/vs-code-editor-icon.png?w=280&fit=max&auto=format&n=mfM-EyoZGnQv8JTc&q=85&s=56f218d5464359d6480cfe23f70a923e 280w, https://mintcdn.com/claude-code/mfM-EyoZGnQv8JTc/images/vs-code-editor-icon.png?w=560&fit=max&auto=format&n=mfM-EyoZGnQv8JTc&q=85&s=344a8db024b196c795a80dc85cacb8d1 560w, https://mintcdn.com/claude-code/mfM-EyoZGnQv8JTc/images/vs-code-editor-icon.png?w=840&fit=max&auto=format&n=mfM-EyoZGnQv8JTc&q=85&s=f30bf834ee0625b2a4a635d552d87163 840w, https://mintcdn.com/claude-code/mfM-EyoZGnQv8JTc/images/vs-code-editor-icon.png?w=1100&fit=max&auto=format&n=mfM-EyoZGnQv8JTc&q=85&s=81fdf984840e43a9f08ae42729d1484d 1100w, https://mintcdn.com/claude-code/mfM-EyoZGnQv8JTc/images/vs-code-editor-icon.png?w=1650&fit=max&auto=format&n=mfM-EyoZGnQv8JTc&q=85&s=8b60fb32de54717093d512afaa99785c 1650w, https://mintcdn.com/claude-code/mfM-EyoZGnQv8JTc/images/vs-code-editor-icon.png?w=2500&fit=max&auto=format&n=mfM-EyoZGnQv8JTc&q=85&s=893e6bda8f2e9d42c8a294d394f0b736 2500w" />

47 Other ways to open Claude Code:

49 * **Command Palette**: `Cmd+Shift+P` (Mac) or `Ctrl+Shift+P` (Windows/Linux), type "Claude Code", and select an option like "Open in New Tab"

50 * **Status Bar**: Click **✱ Claude Code** in the bottom-right corner of the window. This works even when no file is open.

52 When you first open the panel, a **Learn Claude Code** checklist appears. Work through each item by clicking **Show me**, or dismiss it with the X. To reopen it later, uncheck **Hide Onboarding** in VS Code settings under Extensions → Claude Code.

54 You can drag the Claude panel to reposition it anywhere in VS Code. See [Customize your workflow](#customize-your-workflow) for details.

55 </Step>

57 <Step title="Send a prompt">

58 Ask Claude to help with your code or files, whether that's explaining how something works, debugging an issue, or making changes.

60 <Tip>Claude automatically sees your selected text. Press `Option+K` (Mac) / `Alt+K` (Windows/Linux) to also insert an @-mention reference (like `@file.ts#5-10`) into your prompt.</Tip>

62 Here's an example of asking about a particular line in a file:

64 <img src="https://mintcdn.com/claude-code/FVYz38sRY-VuoGHA/images/vs-code-send-prompt.png?fit=max&auto=format&n=FVYz38sRY-VuoGHA&q=85&s=ede3ed8d8d5f940e01c5de636d009cfd" alt="VS Code editor with lines 2-3 selected in a Python file, and the Claude Code panel showing a question about those lines with an @-mention reference" data-og-width="3288" width="3288" data-og-height="1876" height="1876" data-path="images/vs-code-send-prompt.png" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/FVYz38sRY-VuoGHA/images/vs-code-send-prompt.png?w=280&fit=max&auto=format&n=FVYz38sRY-VuoGHA&q=85&s=f40bde7b2c245fe8f0f5b784e8106492 280w, https://mintcdn.com/claude-code/FVYz38sRY-VuoGHA/images/vs-code-send-prompt.png?w=560&fit=max&auto=format&n=FVYz38sRY-VuoGHA&q=85&s=fad66a27a9a6faa23b05370aa4f398b2 560w, https://mintcdn.com/claude-code/FVYz38sRY-VuoGHA/images/vs-code-send-prompt.png?w=840&fit=max&auto=format&n=FVYz38sRY-VuoGHA&q=85&s=4539c8a3823ca80a5c8771f6c088ce9e 840w, https://mintcdn.com/claude-code/FVYz38sRY-VuoGHA/images/vs-code-send-prompt.png?w=1100&fit=max&auto=format&n=FVYz38sRY-VuoGHA&q=85&s=fae8ebf300c7853409a562ffa46d9c71 1100w, https://mintcdn.com/claude-code/FVYz38sRY-VuoGHA/images/vs-code-send-prompt.png?w=1650&fit=max&auto=format&n=FVYz38sRY-VuoGHA&q=85&s=22e4462bb8cf0c0ca20f8102bc4c971a 1650w, https://mintcdn.com/claude-code/FVYz38sRY-VuoGHA/images/vs-code-send-prompt.png?w=2500&fit=max&auto=format&n=FVYz38sRY-VuoGHA&q=85&s=739bfd045f70fe7be1a109a53494590e 2500w" />

65 </Step>

67 <Step title="Review changes">

68 When Claude wants to edit a file, it shows a side-by-side comparison of the original and proposed changes, then asks for permission. You can accept, reject, or tell Claude what to do instead.

70 <img src="https://mintcdn.com/claude-code/FVYz38sRY-VuoGHA/images/vs-code-edits.png?fit=max&auto=format&n=FVYz38sRY-VuoGHA&q=85&s=e005f9b41c541c5c7c59c082f7c4841c" alt="VS Code showing a diff of Claude's proposed changes with a permission prompt asking whether to make the edit" data-og-width="3292" width="3292" data-og-height="1876" height="1876" data-path="images/vs-code-edits.png" data-optimize="true" data-opv="3" srcset="https://mintcdn.com/claude-code/FVYz38sRY-VuoGHA/images/vs-code-edits.png?w=280&fit=max&auto=format&n=FVYz38sRY-VuoGHA&q=85&s=cb5d41b81087f79b842a56b5a3304660 280w, https://mintcdn.com/claude-code/FVYz38sRY-VuoGHA/images/vs-code-edits.png?w=560&fit=max&auto=format&n=FVYz38sRY-VuoGHA&q=85&s=90bb691960decdc06393c3c21cd62c75 560w, https://mintcdn.com/claude-code/FVYz38sRY-VuoGHA/images/vs-code-edits.png?w=840&fit=max&auto=format&n=FVYz38sRY-VuoGHA&q=85&s=9a11bf878ba619e850380904ff4f38e8 840w, https://mintcdn.com/claude-code/FVYz38sRY-VuoGHA/images/vs-code-edits.png?w=1100&fit=max&auto=format&n=FVYz38sRY-VuoGHA&q=85&s=6dddbf596b4f69ec6245bdc5eb6dd487 1100w, https://mintcdn.com/claude-code/FVYz38sRY-VuoGHA/images/vs-code-edits.png?w=1650&fit=max&auto=format&n=FVYz38sRY-VuoGHA&q=85&s=ef2713b8cbfd2cee97af817d813d64c7 1650w, https://mintcdn.com/claude-code/FVYz38sRY-VuoGHA/images/vs-code-edits.png?w=2500&fit=max&auto=format&n=FVYz38sRY-VuoGHA&q=85&s=1f7e1c52919cdfddf295f32a2ec7ae59 2500w" />

71 </Step>

72</Steps>

74For more ideas on what you can do with Claude Code, see [Common workflows](/en/common-workflows).

76<Tip>

77 Run "Claude Code: Open Walkthrough" from the Command Palette for a guided tour of the basics.

78</Tip>

80## Use the prompt box

82The prompt box supports several features:

84* **Permission modes**: Click the mode indicator at the bottom of the prompt box to switch modes. In normal mode, Claude asks permission before each action. In Plan mode, Claude describes what it will do and waits for approval before making changes. In auto-accept mode, Claude makes edits without asking. Set the default in VS Code settings under `claudeCode.initialPermissionMode`.

85* **Command menu**: Click `/` or type `/` to open the command menu. Options include attaching files, switching models, toggling extended thinking, and viewing plan usage (`/usage`). The Customize section provides access to MCP servers, hooks, memory, permissions, and plugins. Items with a terminal icon open in the integrated terminal.

86* **Context indicator**: The prompt box shows how much of Claude's context window you're using. Claude automatically compacts when needed, or you can run `/compact` manually.

87* **Extended thinking**: Lets Claude spend more time reasoning through complex problems. Toggle it on via the command menu (`/`). See [Extended thinking](/en/common-workflows#use-extended-thinking-thinking-mode) for details.

88* **Multi-line input**: Press `Shift+Enter` to add a new line without sending. This also works in the "Other" free-text input of question dialogs.

90### Reference files and folders

92Use @-mentions to give Claude context about specific files or folders. When you type `@` followed by a file or folder name, Claude reads that content and can answer questions about it or make changes to it. Claude Code supports fuzzy matching, so you can type partial names to find what you need:

94```

95> Explain the logic in @auth (fuzzy matches auth.js, AuthService.ts, etc.)

96> What's in @src/components/ (include a trailing slash for folders)

97```

99For large PDFs, you can ask Claude to read specific pages instead of the whole file: a single page, a range like pages 1-10, or an open-ended range like page 3 onward.

100

101When you select text in the editor, Claude can see your highlighted code automatically. The prompt box footer shows how many lines are selected. Press `Option+K` (Mac) / `Alt+K` (Windows/Linux) to insert an @-mention with the file path and line numbers (e.g., `@app.ts#5-10`). Click the selection indicator to toggle whether Claude can see your highlighted text - the eye-slash icon means the selection is hidden from Claude.

102

103You can also hold `Shift` while dragging files into the prompt box to add them as attachments. Click the X on any attachment to remove it from context.

104

105### Resume past conversations

106

107Click the dropdown at the top of the Claude Code panel to access your conversation history. You can search by keyword or browse by time (Today, Yesterday, Last 7 days, etc.). Click any conversation to resume it with the full message history. For more on resuming sessions, see [Common workflows](/en/common-workflows#resume-previous-conversations).

108

109### Resume remote sessions from Claude.ai

110

111If you use [Claude Code on the web](/en/claude-code-on-the-web), you can resume those remote sessions directly in VS Code. This requires signing in with **Claude.ai Subscription**, not Anthropic Console.

112

113<Steps>

114 <Step title="Open Past Conversations">

115 Click the **Past Conversations** dropdown at the top of the Claude Code panel.

116 </Step>

117

118 <Step title="Select the Remote tab">

119 The dialog shows two tabs: Local and Remote. Click **Remote** to see sessions from claude.ai.

120 </Step>

121

122 <Step title="Select a session to resume">

123 Browse or search your remote sessions. Click any session to download it and continue the conversation locally.

124 </Step>

125</Steps>

126

127<Note>

128 Only web sessions started with a GitHub repository appear in the Remote tab. Resuming loads the conversation history locally; changes are not synced back to claude.ai.

129</Note>

130

131## Customize your workflow

132

133Once you're up and running, you can reposition the Claude panel, run multiple sessions, or switch to terminal mode.

134

135### Choose where Claude lives

136

137You can drag the Claude panel to reposition it anywhere in VS Code. Grab the panel's tab or title bar and drag it to:

138

139* **Secondary sidebar**: The right side of the window. Keeps Claude visible while you code.

140* **Primary sidebar**: The left sidebar with icons for Explorer, Search, etc.

141* **Editor area**: Opens Claude as a tab alongside your files. Useful for side tasks.

142

143<Tip>

144 Use the sidebar for your main Claude session and open additional tabs for side tasks. Claude remembers your preferred location. Note that the Spark icon only appears in the Activity Bar when the Claude panel is docked to the left. Since Claude defaults to the right side, use the Editor Toolbar icon to open Claude.

145</Tip>

146

147### Run multiple conversations

148

149Use **Open in New Tab** or **Open in New Window** from the Command Palette to start additional conversations. Each conversation maintains its own history and context, allowing you to work on different tasks in parallel.

150

151When using tabs, a small colored dot on the spark icon indicates status: blue means a permission request is pending, orange means Claude finished while the tab was hidden.

152

153### Switch to terminal mode

154

155By default, the extension opens a graphical chat panel. If you prefer the CLI-style interface, open the [Use Terminal setting](vscode://settings/claudeCode.useTerminal) and check the box.

156

157You can also open VS Code settings (`Cmd+,` on Mac or `Ctrl+,` on Windows/Linux), go to Extensions → Claude Code, and check **Use Terminal**.

158

159## Manage plugins

160

161The VS Code extension includes a graphical interface for installing and managing [plugins](/en/plugins). Type `/plugins` in the prompt box to open the **Manage plugins** interface.

162

163### Install plugins

164

165The plugin dialog shows two tabs: **Plugins** and **Marketplaces**.

166

167In the Plugins tab:

168

169* **Installed plugins** appear at the top with toggle switches to enable or disable them

170* **Available plugins** from your configured marketplaces appear below

171* Search to filter plugins by name or description

172* Click **Install** on any available plugin

173

174When you install a plugin, choose the installation scope:

175

176* **Install for you**: Available in all your projects (user scope)

177* **Install for this project**: Shared with project collaborators (project scope)

178* **Install locally**: Only for you, only in this repository (local scope)

179

180### Manage marketplaces

43 181

~~44### Configuration~~182Switch to the **Marketplaces** tab to add or remove plugin sources:

45 183

~~46The VS Code extension reads the same `settings.json` files as the CLI. See the [settings documentation](/en/settings) for details.~~184* Enter a GitHub repo, URL, or local path to add a new marketplace

185* Click the refresh icon to update a marketplace's plugin list

186* Click the trash icon to remove a marketplace

47 187

~~48#### Third-party providers and gateways~~188After making changes, a banner prompts you to restart Claude Code to apply the updates.

49 189

~~50To use the VS Code extension with third-party providers (Amazon Bedrock, Google Vertex AI, Microsoft Foundry) or gateways that handle authentication:~~190<Note>

191 Plugin management in VS Code uses the same CLI commands under the hood. Plugins and marketplaces you configure in the extension are also available in the CLI, and vice versa.

192</Note>

51 193

~~521. Add the appropriate environment variables for your provider or gateway to your Claude Code `settings.json`:~~194For more about the plugin system, see [Plugins](/en/plugins) and [Plugin marketplaces](/en/plugin-marketplaces).

~~53 ```json theme={null}~~

~~54 {~~

~~55 "env": {~~

~~56 "CLAUDE_CODE_USE_BEDROCK": "1",~~

~~57 "AWS_REGION": "us-east-2",~~

~~58 "AWS_PROFILE": "your-profile"~~

~~59 }~~

~~60 }~~

~~61 ```~~

62 195

~~632. Disable the VS Code extension login prompt via [`vscode://settings/claudeCode.disableLoginPrompt`](vscode://settings/claudeCode.disableLoginPrompt) or in VS Code's settings:~~196## Automate browser tasks with Chrome

~~64 ```json theme={null}~~

~~65 {~~

~~66 "claudeCode.disableLoginPrompt": true~~

~~67 }~~

~~68 ```~~

69 197

~~70For detailed setup instructions and additional configuration options, see:~~198Connect Claude to your Chrome browser to test web apps, debug with console logs, and automate browser workflows without leaving VS Code. This requires the [Claude in Chrome extension](https://chromewebstore.google.com/detail/claude/fcoeoabgfenejglbffodgkkbkcdhcgfn) version 1.0.36 or higher.

71 199

~~72* [Claude Code on Amazon Bedrock](/en/amazon-bedrock)~~200Type `@browser` in the prompt box followed by what you want Claude to do:

~~73* [Claude Code on Google Vertex AI](/en/google-vertex-ai)~~

~~74* [Claude Code on Microsoft Foundry](/en/microsoft-foundry)~~

75 201

~~76### Not yet implemented~~202```text theme={null}

203@browser go to localhost:3000 and check the console for errors

204```

77 205

~~78The following features aren't yet available in the VS Code extension:~~206You can also open the attachment menu to select specific browser tools like opening a new tab or reading page content.

79 207

80* **MCP server and Plugin configuration UI**: Type `/mcp` to open the terminal-based MCP server configuration, or `/plugin` for Plugin configuration. Once configured, MCP servers and Plugins work in the extension. You can also [configure MCP servers through the CLI](/en/mcp) first, then the extension will use them.208Claude opens new tabs for browser tasks and shares your browser's login state, so it can access any site you're already signed into.

~~81* **Subagents configuration**: Configure [subagents through the CLI](/en/sub-agents) to use them in VS Code~~

~~82* **Checkpoints**: Save and restore conversation state at specific points~~

~~83* **Conversation rewinding**: The `/rewind` command is coming soon~~

~~84* **Advanced shortcuts**:~~

~~85 * `#` shortcut to add to memory (not supported)~~

~~86 * `!` shortcut to run bash commands directly (not supported)~~

~~87* **Tab completion**: File path completion with tab key~~

88* **Model selection UI for older models**: To use older model versions like `claude-sonnet-4-20250514`, open VS Code settings for Claude Code (the `/General Config` command) and insert the model string directly into the 'Selected Model' field

89 209

~~90These features are planned for future updates.~~210For setup instructions, the full list of capabilities, and troubleshooting, see [Use Claude Code with Chrome](/en/chrome).

91 211

~~92## Security considerations~~212## VS Code commands and shortcuts

93 213

94When Claude Code runs in VS Code with auto-edit permissions enabled, it may be able to modify IDE configuration files that can be automatically executed by your IDE. This may increase the risk of running Claude Code in auto-edit mode and allow bypassing Claude Code's permission prompts for bash execution.214Open the Command Palette (`Cmd+Shift+P` on Mac or `Ctrl+Shift+P` on Windows/Linux) and type "Claude Code" to see all available VS Code commands for the Claude Code extension.

95 215

~~96When running in VS Code, consider:~~216Some shortcuts depend on which panel is "focused" (receiving keyboard input). When your cursor is in a code file, the editor is focused. When your cursor is in Claude's prompt box, Claude is focused. Use `Cmd+Esc` / `Ctrl+Esc` to toggle between them.

97 217

~~98* Enabling [VS Code Restricted Mode](https://code.visualstudio.com/docs/editor/workspace-trust#_restricted-mode) for untrusted workspaces~~218<Note>

~~99* Using manual approval mode for edits~~219 These are VS Code commands for controlling the extension. Not all built-in Claude Code commands are available in the extension. See [VS Code extension vs. Claude Code CLI](#vs-code-extension-vs-claude-code-cli) for details.

100* Taking extra care to ensure Claude is only used with trusted prompts220</Note>

101 221

102## Legacy CLI integration222| Command | Shortcut | Description |

223| -------------------------- | -------------------------------------------------------- | ------------------------------------------------------------------------------------ |

224| Focus Input | `Cmd+Esc` (Mac) / `Ctrl+Esc` (Windows/Linux) | Toggle focus between editor and Claude |

225| Open in Side Bar | - | Open Claude in the left sidebar |

226| Open in Terminal | - | Open Claude in terminal mode |

227| Open in New Tab | `Cmd+Shift+Esc` (Mac) / `Ctrl+Shift+Esc` (Windows/Linux) | Open a new conversation as an editor tab |

228| Open in New Window | - | Open a new conversation in a separate window |

229| New Conversation | `Cmd+N` (Mac) / `Ctrl+N` (Windows/Linux) | Start a new conversation (requires Claude to be focused) |

230| Insert @-Mention Reference | `Option+K` (Mac) / `Alt+K` (Windows/Linux) | Insert a reference to the current file and selection (requires editor to be focused) |

231| Show Logs | - | View extension debug logs |

232| Logout | - | Sign out of your Anthropic account |

103 233

104The original VS Code integration allows Claude Code running in the terminal to interact with your IDE. It provides selection context sharing (current selection/tab is automatically shared with Claude Code), diff viewing in the IDE instead of terminal, file reference shortcuts (`Cmd+Option+K` on Mac or `Alt+Ctrl+K` on Windows/Linux to insert file references like @File#L1-99), and automatic diagnostic sharing (lint and syntax errors).234## Configure settings

105 235

106The legacy integration auto-installs when you run `claude` from VS Code's integrated terminal. Run `claude` from the terminal and all features activate. For external terminals, use the `/ide` command to connect Claude Code to your VS Code instance. To configure, run `claude`, enter `/config`, and set the diff tool to `auto` for automatic IDE detection.236The extension has two types of settings:

107 237

108Both the extension and CLI integration work with Visual Studio Code, Cursor, Windsurf, and VSCodium.238* **Extension settings** in VS Code: Control the extension's behavior within VS Code. Open with `Cmd+,` (Mac) or `Ctrl+,` (Windows/Linux), then go to Extensions → Claude Code. You can also type `/` and select **General Config** to open settings.

239* **Claude Code settings** in `~/.claude/settings.json`: Shared between the extension and CLI. Use for allowed commands, environment variables, hooks, and MCP servers. See [Settings](/en/settings) for details.

109 240

110## Troubleshooting241<Tip>

242 Add `"$schema": "https://json.schemastore.org/claude-code-settings.json"` to your `settings.json` to get autocomplete and inline validation for all available settings directly in VS Code.

243</Tip>

111 244

112### Extension not installing245### Extension settings

113 246

114* Ensure you have a compatible version of VS Code (1.85.0 or later)247| Setting | Default | Description |

248| --------------------------------- | --------- | ----------------------------------------------------------------------------------------------------- |

249| `selectedModel` | `default` | Model for new conversations. Change per-session with `/model`. |

250| `useTerminal` | `false` | Launch Claude in terminal mode instead of graphical panel |

251| `initialPermissionMode` | `default` | Controls approval prompts: `default` (ask each time), `plan`, `acceptEdits`, or `bypassPermissions` |

252| `preferredLocation` | `panel` | Where Claude opens: `sidebar` (right) or `panel` (new tab) |

253| `autosave` | `true` | Auto-save files before Claude reads or writes them |

254| `useCtrlEnterToSend` | `false` | Use Ctrl/Cmd+Enter instead of Enter to send prompts |

255| `enableNewConversationShortcut` | `true` | Enable Cmd/Ctrl+N to start a new conversation |

256| `hideOnboarding` | `false` | Hide the onboarding checklist (graduation cap icon) |

257| `respectGitIgnore` | `true` | Exclude .gitignore patterns from file searches |

258| `environmentVariables` | `[]` | Set environment variables for the Claude process. Use Claude Code settings instead for shared config. |

259| `disableLoginPrompt` | `false` | Skip authentication prompts (for third-party provider setups) |

260| `allowDangerouslySkipPermissions` | `false` | Bypass all permission prompts. **Use with extreme caution.** |

261| `claudeProcessWrapper` | - | Executable path used to launch the Claude process |

262

263## VS Code extension vs. Claude Code CLI

264

265Claude Code is available as both a VS Code extension (graphical panel) and a CLI (command-line interface in the terminal). Some features are only available in the CLI. If you need a CLI-only feature, run `claude` in VS Code's integrated terminal.

266

267| Feature | CLI | VS Code Extension |

268| ------------------- | --------------------------------------------- | ---------------------------------------- |

269| Commands and skills | [All](/en/interactive-mode#built-in-commands) | Subset (type `/` to see available) |

270| MCP server config | Yes | No (configure via CLI, use in extension) |

271| Checkpoints | Yes | Yes |

272| `!` bash shortcut | Yes | No |

273| Tab completion | Yes | No |

274

275### Rewind with checkpoints

276

277The VS Code extension supports checkpoints, which track Claude's file edits and let you rewind to a previous state. Hover over any message to reveal the rewind button, then choose from three options:

278

279* **Fork conversation from here**: start a new conversation branch from this message while keeping all code changes intact

280* **Rewind code to here**: revert file changes back to this point in the conversation while keeping the full conversation history

281* **Fork conversation and rewind code**: start a new conversation branch and revert file changes to this point

282

283For full details on how checkpoints work and their limitations, see [Checkpointing](/en/checkpointing).

284

285### Run CLI in VS Code

286

287To use the CLI while staying in VS Code, open the integrated terminal (`` Ctrl+` `` on Windows/Linux or `` Cmd+` `` on Mac) and run `claude`. The CLI automatically integrates with your IDE for features like diff viewing and diagnostic sharing.

288

289If using an external terminal, run `/ide` inside Claude Code to connect it to VS Code.

290

291### Switch between extension and CLI

292

293The extension and CLI share the same conversation history. To continue an extension conversation in the CLI, run `claude --resume` in the terminal. This opens an interactive picker where you can search for and select your conversation.

294

295### Include terminal output in prompts

296

297Reference terminal output in your prompts using `@terminal:name` where `name` is the terminal's title. This lets Claude see command output, error messages, or logs without copy-pasting.

298

299### Monitor background processes

300

301When Claude runs long-running commands, the extension shows progress in the status bar. However, visibility for background tasks is limited compared to the CLI. For better visibility, have Claude output the command so you can run it in VS Code's integrated terminal.

302

303### Connect to external tools with MCP

304

305MCP (Model Context Protocol) servers give Claude access to external tools, databases, and APIs. Configure them via CLI, then use them in both extension and CLI.

306

307To add an MCP server, open the integrated terminal (`` Ctrl+` `` or `` Cmd+` ``) and run:

308

309```bash theme={null}

310claude mcp add --transport http github https://api.githubcopilot.com/mcp/

311```

312

313Once configured, ask Claude to use the tools (e.g., "Review PR #456"). Some servers require authentication: run `claude` in the terminal, then type `/mcp` to authenticate. See the [MCP documentation](/en/mcp) for available servers.

314

315## Work with git

316

317Claude Code integrates with git to help with version control workflows directly in VS Code. Ask Claude to commit changes, create pull requests, or work across branches.

318

319### Create commits and pull requests

320

321Claude can stage changes, write commit messages, and create pull requests based on your work:

322

323```

324> commit my changes with a descriptive message

325> create a pr for this feature

326> summarize the changes I've made to the auth module

327```

328

329When creating pull requests, Claude generates descriptions based on the actual code changes and can add context about testing or implementation decisions.

330

331### Use git worktrees for parallel tasks

332

333Git worktrees allow multiple Claude Code sessions to work on separate branches simultaneously, each with isolated files:

334

335```bash theme={null}

336# Create a worktree for a new feature

337git worktree add ../project-feature-a -b feature-a

338

339# Run Claude Code in each worktree

340cd ../project-feature-a && claude

341```

342

343Each worktree maintains independent file state while sharing git history. This prevents Claude instances from interfering with each other when working on different tasks.

344

345For detailed git workflows including PR reviews and branch management, see [Common workflows](/en/common-workflows#create-pull-requests).

346

347## Use third-party providers

348

349By default, Claude Code connects directly to Anthropic's API. If your organization uses Amazon Bedrock, Google Vertex AI, or Microsoft Foundry to access Claude, configure the extension to use your provider instead:

350

351<Steps>

352 <Step title="Disable login prompt">

353 Open the [Disable Login Prompt setting](vscode://settings/claudeCode.disableLoginPrompt) and check the box.

354

355 You can also open VS Code settings (`Cmd+,` on Mac or `Ctrl+,` on Windows/Linux), search for "Claude Code login", and check **Disable Login Prompt**.

356 </Step>

357

358 <Step title="Configure your provider">

359 Follow the setup guide for your provider:

360

361 * [Claude Code on Amazon Bedrock](/en/amazon-bedrock)

362 * [Claude Code on Google Vertex AI](/en/google-vertex-ai)

363 * [Claude Code on Microsoft Foundry](/en/microsoft-foundry)

364

365 These guides cover configuring your provider in `~/.claude/settings.json`, which ensures your settings are shared between the VS Code extension and the CLI.

366 </Step>

367</Steps>

368

369## Security and privacy

370

371Your code stays private. Claude Code processes your code to provide assistance but does not use it to train models. For details on data handling and how to opt out of logging, see [Data and privacy](/en/data-usage).

372

373With auto-edit permissions enabled, Claude Code can modify VS Code configuration files (like `settings.json` or `tasks.json`) that VS Code may execute automatically. To reduce risk when working with untrusted code:

374

375* Enable [VS Code Restricted Mode](https://code.visualstudio.com/docs/editor/workspace-trust#_restricted-mode) for untrusted workspaces

376* Use manual approval mode instead of auto-accept for edits

377* Review changes carefully before accepting them

378

379## Fix common issues

380

381### Extension won't install

382

383* Ensure you have a compatible version of VS Code (1.98.0 or later)

115* Check that VS Code has permission to install extensions384* Check that VS Code has permission to install extensions

116* Try installing directly from the Marketplace website385* Try installing directly from the [VS Code Marketplace](https://marketplace.visualstudio.com/items?itemName=anthropic.claude-code)

386

387### Spark icon not visible

388

389The Spark icon appears in the **Editor Toolbar** (top-right of editor) when you have a file open. If you don't see it:

390

3911. **Open a file**: The icon requires a file to be open. Having just a folder open isn't enough.

3922. **Check VS Code version**: Requires 1.98.0 or higher (Help → About)

3933. **Restart VS Code**: Run "Developer: Reload Window" from the Command Palette

3944. **Disable conflicting extensions**: Temporarily disable other AI extensions (Cline, Continue, etc.)

3955. **Check workspace trust**: The extension doesn't work in Restricted Mode

396

397Alternatively, click "✱ Claude Code" in the **Status Bar** (bottom-right corner). This works even without a file open. You can also use the **Command Palette** (`Cmd+Shift+P` / `Ctrl+Shift+P`) and type "Claude Code".

117 398

118### Claude Code never responds399### Claude Code never responds

119 400

1221. **Check your internet connection**: Ensure you have a stable internet connection4031. **Check your internet connection**: Ensure you have a stable internet connection

1232. **Start a new conversation**: Try starting a fresh conversation to see if the issue persists4042. **Start a new conversation**: Try starting a fresh conversation to see if the issue persists

1243. **Try the CLI**: Run `claude` from the terminal to see if you get more detailed error messages4053. **Try the CLI**: Run `claude` from the terminal to see if you get more detailed error messages

1254. **File a bug report**: If the problem continues, [file an issue on GitHub](https://github.com/anthropics/claude-code/issues) with details about the error

126 406

127### Legacy integration not working407If problems persist, [file an issue on GitHub](https://github.com/anthropics/claude-code/issues) with details about the error.

408

409## Uninstall the extension

410

411To uninstall the Claude Code extension:

412

4131. Open the Extensions view (`Cmd+Shift+X` on Mac or `Ctrl+Shift+X` on Windows/Linux)

4142. Search for "Claude Code"

4153. Click **Uninstall**

416

417To also remove extension data and reset all settings:

128 418

129* Ensure you're running Claude Code from VS Code's integrated terminal419```bash theme={null}

130* Ensure the CLI for your IDE variant is installed:420rm -rf ~/.vscode/globalStorage/anthropic.claude-code

131 * VS Code: `code` command should be available421```

132 * Cursor: `cursor` command should be available

133 * Windsurf: `windsurf` command should be available

134 * VSCodium: `codium` command should be available

135* If the command isn't installed:

136 1. Open command palette with `Cmd+Shift+P` (Mac) or `Ctrl+Shift+P` (Windows/Linux)

137 2. Search for `Shell Command: Install 'code' command in PATH` (or equivalent for your IDE)

138 422

139For additional help, see the [troubleshooting guide](/en/troubleshooting).423For additional help, see the [troubleshooting guide](/en/troubleshooting).

140 424

425## Next steps

141 426

427Now that you have Claude Code set up in VS Code:

142 428

143> To find navigation and other pages in this documentation, fetch the llms.txt file at: https://code.claude.com/docs/llms.txt429* [Explore common workflows](/en/common-workflows) to get the most out of Claude Code

430* [Set up MCP servers](/en/mcp) to extend Claude's capabilities with external tools. Configure servers using the CLI, then use them in the extension.

431* [Configure Claude Code settings](/en/settings) to customize allowed commands, hooks, and more. These settings are shared between the extension and CLI.

Anthropic - Claude Code Docs Changes 2025-12-16 18:02 UTC → 2026-02-07 21:05 UTC