cli/slash-commands diff

cli/slash-commands.md +275 −33

Details

1# Slash commands in Codex CLI1# Slash commands in Codex CLI

2 2

3Slash commands give you fast, keyboard-first control over Codex. Type `/` in the composer to open the slash popup, choose a command, and Codex will perform actions such as switching models, adjusting permissions, or summarizing long conversations without leaving the terminal.3Slash commands give you fast, keyboard-first control over Codex. Type `/` in

4the composer to open the slash popup, choose a command, and Codex will perform

5actions such as switching models, adjusting permissions, or summarizing long

6conversations without leaving the terminal.

4 7

5This guide shows you how to:8This guide shows you how to:

6 9

7- Find the right built-in slash command for a task10- Find the right built-in slash command for a task

~~8- Steer an active session with commands like `/model`, `/personality`, `/permissions`, `/experimental`, `/agent`, and `/status`~~11- Steer an active session with commands like `/model`, `/fast`,

12 `/personality`, `/permissions`, `/approve`, `/raw`, `/agent`, and `/status`

9 13

10## Built-in slash commands14## Built-in slash commands

11 15

~~12Codex ships with the following commands. Open the slash popup and start typing the command name to filter the list.~~16Codex ships with the following commands. Open the slash popup and start typing

17the command name to filter the list.

19When a task is already running, you can type a slash command and press `Tab` to

20queue it for the next turn. Codex parses queued slash commands when they run, so

21command menus and errors appear after the current turn finishes. Slash

22completion still works before you queue the command.

13 23

15| ------------------------------------------------------------------------------- | --------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------- |25| ------------------------------------------------------------------------------- | --------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------- |

16| [`/permissions`](#update-permissions-with-permissions) | Set what Codex can do without asking first. | Relax or tighten approval requirements mid-session, such as switching between Auto and Read Only. |26| [`/permissions`](#update-permissions-with-permissions) | Set what Codex can do without asking first. | Relax or tighten approval requirements mid-session, such as switching between Auto and Read Only. |

27| [`/ide`](#include-ide-context-with-ide) | Include open files, current selection, and other IDE context. | Pull editor context into the next prompt without re-explaining what's open in your IDE. |

28| [`/keymap`](#remap-tui-shortcuts-with-keymap) | Remap TUI keyboard shortcuts. | Inspect and persist custom shortcut bindings in `config.toml`. |

29| [`/vim`](#toggle-vim-mode-with-vim) | Toggle Vim mode for the composer. | Switch between Vim normal/insert behavior and the default composer editing mode. |

17| [`/sandbox-add-read-dir`](#grant-sandbox-read-access-with-sandbox-add-read-dir) | Grant sandbox read access to an extra directory (Windows only). | Unblock commands that need to read an absolute directory path outside the current readable roots. |30| [`/sandbox-add-read-dir`](#grant-sandbox-read-access-with-sandbox-add-read-dir) | Grant sandbox read access to an extra directory (Windows only). | Unblock commands that need to read an absolute directory path outside the current readable roots. |

33| [`/plugins`](#browse-plugins-with-plugins) | Browse installed and discoverable plugins. | Inspect plugin tools, install suggested plugins, or manage plugin availability. |

34| [`/hooks`](#review-hooks-with-hooks) | Review lifecycle hooks. | Inspect configured hooks, trust new or changed hooks, or disable non-managed hooks before they run. |

35| [`/clear`](#clear-the-terminal-and-start-a-new-chat-with-clear) | Clear the terminal and start a fresh chat. | Reset the visible UI and conversation together when you want a fresh start. |

20| [`/compact`](#keep-transcripts-lean-with-compact) | Summarize the visible conversation to free tokens. | Use after long runs so Codex retains key points without blowing the context window. |36| [`/compact`](#keep-transcripts-lean-with-compact) | Summarize the visible conversation to free tokens. | Use after long runs so Codex retains key points without blowing the context window. |

37| [`/copy`](#copy-the-latest-response-with-copy) | Copy the latest completed Codex output. | Grab the latest finished response or plan text without manually selecting it. You can also press `Ctrl+O`. |

41| [`/approve`](#approve-an-auto-review-denial-with-approve) | Approve one retry of a recent auto review denial. | Retry a command or action that the auto reviewer denied. |

42| [`/memories`](#configure-memories-with-memories) | Configure memory use and generation. | Turn memory injection or memory generation on or off without leaving the TUI. |

43| [`/skills`](#use-skills-with-skills) | Browse and use skills. | Improve task-specific behavior by selecting a relevant local skill. |

44| [`/hooks`](#view-lifecycle-hooks-with-hooks) | View and manage lifecycle hooks. | Inspect hook configuration loaded into the current session. |

25| [`/init`](#generate-agentsmd-with-init) | Generate an `AGENTS.md` scaffold in the current directory. | Capture persistent instructions for the repository or subdirectory you're working in. |46| [`/init`](#generate-agentsmd-with-init) | Generate an `AGENTS.md` scaffold in the current directory. | Capture persistent instructions for the repository or subdirectory you're working in. |

~~27| [`/mcp`](#list-mcp-tools-with-mcp) | List configured Model Context Protocol (MCP) tools. | Check which external tools Codex can call during the session. |~~48| [`/mcp`](#list-mcp-tools-with-mcp) | List configured Model Context Protocol (MCP) tools. | Check which external tools Codex can call during the session; add `verbose` for server details. |

29| [`/model`](#set-the-active-model-with-model) | Choose the active model (and reasoning effort, when available). | Switch between general-purpose models (`gpt-4.1-mini`) and deeper reasoning models before running a task. |50| [`/model`](#set-the-active-model-with-model) | Choose the active model (and reasoning effort, when available). | Switch between general-purpose models (`gpt-4.1-mini`) and deeper reasoning models before running a task. |

51| [`/fast`](#toggle-fast-mode-with-fast) | Toggle a Fast service tier when the model catalog exposes one. | Turn the current model's Fast tier on or off, or check whether the thread is using it. |

30| [`/plan`](#switch-to-plan-mode-with-plan) | Switch to plan mode and optionally send a prompt. | Ask Codex to propose an execution plan before implementation work starts. |52| [`/plan`](#switch-to-plan-mode-with-plan) | Switch to plan mode and optionally send a prompt. | Ask Codex to propose an execution plan before implementation work starts. |

53| [`/goal`](#set-or-view-an-experimental-task-goal-with-goal) | Set, pause, resume, view, or clear a task goal. | Give Codex a persistent target to track while a larger task runs. Requires `features.goals`. |

31| [`/personality`](#set-a-communication-style-with-personality) | Choose a communication style for responses. | Make Codex more concise, more explanatory, or more collaborative without changing your instructions. |54| [`/personality`](#set-a-communication-style-with-personality) | Choose a communication style for responses. | Make Codex more concise, more explanatory, or more collaborative without changing your instructions. |

32| [`/ps`](#check-background-terminals-with-ps) | Show experimental background terminals and their recent output. | Check long-running commands without leaving the main transcript. |55| [`/ps`](#check-background-terminals-with-ps) | Show experimental background terminals and their recent output. | Check long-running commands without leaving the main transcript. |

56| [`/stop`](#stop-background-terminals-with-stop) | Stop all background terminals. | Cancel background terminal work started by the current session. |

33| [`/fork`](#fork-the-current-conversation-with-fork) | Fork the current conversation into a new thread. | Branch the active session to explore a new approach without losing the current transcript. |57| [`/fork`](#fork-the-current-conversation-with-fork) | Fork the current conversation into a new thread. | Branch the active session to explore a new approach without losing the current transcript. |

58| [`/side`](#start-a-side-conversation-with-side) | Start an ephemeral side conversation. | Ask a focused follow-up without disrupting the main thread's transcript. |

59| [`/raw`](#toggle-raw-scrollback-with-raw) | Toggle raw scrollback mode. | Make terminal selection and copying less formatted while reviewing long output. |

34| [`/resume`](#resume-a-saved-conversation-with-resume) | Resume a saved conversation from your session list. | Continue work from a previous CLI session without starting over. |60| [`/resume`](#resume-a-saved-conversation-with-resume) | Resume a saved conversation from your session list. | Continue work from a previous CLI session without starting over. |

35| [`/new`](#start-a-new-conversation-with-new) | Start a new conversation inside the same CLI session. | Reset the chat context without leaving the CLI when you want a fresh prompt in the same repo. |61| [`/new`](#start-a-new-conversation-with-new) | Start a new conversation inside the same CLI session. | Reset the chat context without leaving the CLI when you want a fresh prompt in the same repo. |

38| [`/status`](#inspect-the-session-with-status) | Display session configuration and token usage. | Confirm the active model, approval policy, writable roots, and remaining context capacity. |64| [`/status`](#inspect-the-session-with-status) | Display session configuration and token usage. | Confirm the active model, approval policy, writable roots, and remaining context capacity. |

39| [`/debug-config`](#inspect-config-layers-with-debug-config) | Print config layer and requirements diagnostics. | Debug precedence and policy requirements, including experimental network constraints. |65| [`/debug-config`](#inspect-config-layers-with-debug-config) | Print config layer and requirements diagnostics. | Debug precedence and policy requirements, including experimental network constraints. |

40| [`/statusline`](#configure-footer-items-with-statusline) | Configure TUI status-line fields interactively. | Pick and reorder footer items (model/context/limits/git/tokens/session) and persist in config.toml. |66| [`/statusline`](#configure-footer-items-with-statusline) | Configure TUI status-line fields interactively. | Pick and reorder footer items (model/context/limits/git/tokens/session) and persist in config.toml. |

67| [`/title`](#configure-terminal-title-items-with-title) | Configure terminal window or tab title fields interactively. | Pick and reorder title items such as project, status, thread, branch, model, and task progress. |

68| [`/theme`](#choose-a-syntax-theme-with-theme) | Choose a syntax-highlighting theme. | Preview and persist a terminal syntax-highlighting theme. |

41 69

~~42`/quit` and `/exit` both exit the CLI. Use them only after you have saved or committed any important work.~~70`/quit` and `/exit` both exit the CLI. Use them only after you have saved or

71committed any important work.

43 72

~~44The `/approvals` command still works as an alias, but it no longer appears in the slash popup list.~~73Use `/permissions` to adjust what Codex can do without asking first. Use

74`/approve` only when you need to retry a recent action that automatic review

75denied.

45 76

46## Control your session with slash commands77## Control your session with slash commands

47 78

55 86

56Expected: Codex confirms the new model in the transcript. Run `/status` to verify the change.87Expected: Codex confirms the new model in the transcript. Run `/status` to verify the change.

57 88

89### Toggle Fast mode with `/fast`

911. Type `/fast on`, `/fast off`, or `/fast status`.

922. If you want the setting to persist, confirm the update when Codex offers to save it.

94Expected: Codex reports whether the current model's Fast service tier is on or

95off for the current thread. In the TUI footer, you can also show a Fast mode

96status-line item with `/statusline`.

98Fast tier commands are catalog-driven. If the current model doesn't advertise a

99Fast tier, Codex won't show `/fast`.

100

58### Set a communication style with `/personality`101### Set a communication style with `/personality`

59 102

60Use `/personality` to change how Codex communicates without rewriting your prompt.103Use `/personality` to change how Codex communicates without rewriting your prompt.

621. In an active conversation, type `/personality` and press Enter.1051. In an active conversation, type `/personality` and press Enter.

632. Choose a style from the popup.1062. Choose a style from the popup.

64 107

~~65Expected: Codex confirms the new style in the transcript and uses it for later responses in the thread.~~108Expected: Codex confirms the new style in the transcript and uses it for later

109responses in the thread.

66 110

~~67Codex supports `friendly`, `pragmatic`, and `none` personalities. Use `none` to disable personality instructions.~~111Codex supports `friendly`, `pragmatic`, and `none` personalities. Use `none`

112to disable personality instructions.

68 113

69If the active model doesn't support personality-specific instructions, Codex hides this command.114If the active model doesn't support personality-specific instructions, Codex hides this command.

70 115

71### Switch to plan mode with `/plan`116### Switch to plan mode with `/plan`

72 117

~~731. Type `/plan` and press Enter to switch the active conversation into plan mode.~~1181. Type `/plan` and press Enter to switch the active conversation into plan

~~742. Optional: provide inline prompt text (for example, `/plan Propose a migration plan for this service`).~~119 mode.

1202. Optional: provide inline prompt text (for example, `/plan Propose a

121migration plan for this service`).

753. You can paste content or attach images while using inline `/plan` arguments.1223. You can paste content or attach images while using inline `/plan` arguments.

76 123

77Expected: Codex enters plan mode and uses your optional inline prompt as the first planning request.124Expected: Codex enters plan mode and uses your optional inline prompt as the first planning request.

78 125

79While a task is already running, `/plan` is temporarily unavailable.126While a task is already running, `/plan` is temporarily unavailable.

80 127

128### Set an experimental goal with `/goal`

129

130`/goal` is experimental and only available when `features.goals` is enabled. To enable it, open `/experimental` or add `goals = true` under `[features]` in `config.toml`.

131

1321. Type `/goal <objective>` to set the goal, for example `/goal Finish the migration and keep tests green`.

1332. Type `/goal` to view the current goal.

1343. Use `/goal pause`, `/goal resume`, or `/goal clear` to pause, resume, or remove it.

135

136Expected: Codex keeps the goal attached to the active thread while work continues.

137

138Goal objectives must be non-empty and at most 4,000 characters. For longer

139instructions, put the details in a file and point the goal at that file.

140

81### Toggle experimental features with `/experimental`141### Toggle experimental features with `/experimental`

82 142

831. Type `/experimental` and press Enter.1431. Type `/experimental` and press Enter.

~~842. Toggle the features you want (for example, **Multi-agents**), then restart Codex.~~1442. Toggle the features you want (for example, Apps or Smart Approvals), then restart Codex if the prompt asks you to.

85 145

86Expected: Codex saves your feature choices to config and applies them on restart.146Expected: Codex saves your feature choices to config and applies them on restart.

87 147

148### Approve an auto review denial with `/approve`

149

150Use `/approve` when the automatic reviewer denied a recent action and you want

151Codex to retry it once.

152

1531. Type `/approve`.

1542. Confirm the retry when Codex shows the relevant denied action.

155

156Expected: Codex retries that denied action once under the current session

157policy.

158

159### Configure memories with `/memories`

160

1611. Type `/memories`.

1622. Choose whether Codex should use existing memories, generate new memories, or

163 keep memory behavior disabled.

164

165Expected: Codex updates the relevant memory settings for future sessions.

166

167### Use skills with `/skills`

168

1691. Type `/skills`.

1702. Pick the skill you want Codex to apply.

171

172Expected: Codex inserts the selected skill context so the next request follows

173that skill's instructions.

174

175### View lifecycle hooks with `/hooks`

176

1771. Type `/hooks`.

1782. Review the loaded lifecycle hook configuration.

179

180Expected: Codex shows the hooks that can run in the current session.

181

182### Clear the terminal and start a new chat with `/clear`

183

1841. Type `/clear` and press Enter.

185

186Expected: Codex clears the terminal, resets the visible transcript, and starts

187a fresh chat in the same CLI session.

188

189Unlike <kbd>Ctrl</kbd>+<kbd>L</kbd>, `/clear` starts a new conversation.

190

191<kbd>Ctrl</kbd>+<kbd>L</kbd> only clears the terminal view and keeps the current

192chat. Codex disables both actions while a task is in progress.

193

88### Update permissions with `/permissions`194### Update permissions with `/permissions`

89 195

901. Type `/permissions` and press Enter.1961. Type `/permissions` and press Enter.

~~912. Select the approval preset that matches your comfort level, for example `Auto` for hands-off runs or `Read Only` to review edits.~~1972. Select the approval preset that matches your comfort level, for example

198 `Auto` for hands-off runs or `Read Only` to review edits.

199

200Expected: Codex announces the updated policy. Future actions respect the

201updated approval mode until you change it again.

202

203### Include IDE context with `/ide`

204

2051. Type `/ide`.

2062. Add optional inline text if you want to explain what Codex should do with the

207 current IDE selection or open files.

208

209Expected: Codex includes available IDE context in the next prompt.

210

211### Toggle Vim mode with `/vim`

212

2131. Type `/vim`.

2142. Continue editing in the composer.

215

216Expected: Codex toggles composer Vim mode for the current session. To make Vim

217mode the default for new sessions, set `tui.vim_mode_default = true` in

218`config.toml`.

219

220### Copy the latest response with `/copy`

92 221

~~93Expected: Codex announces the updated policy. Future actions respect the new approval mode until you change it again.~~2221. Type `/copy` and press Enter.

223

224Expected: Codex copies the latest completed Codex output to your clipboard.

225

226If a turn is still running, `/copy` uses the latest completed output instead of

227the in-progress response. The command is unavailable before the first completed

228Codex output and immediately after a rollback.

229

230You can also press <kbd>Ctrl</kbd>+<kbd>O</kbd> from the main TUI to copy the

231latest completed response without opening the slash command menu.

232

233### Toggle raw scrollback with `/raw`

234

2351. Type `/raw`, `/raw on`, or `/raw off`.

236

237Expected: Codex toggles raw scrollback mode, which makes terminal selection and

238copying more direct. You can also use the default <kbd>Alt</kbd>+<kbd>R</kbd>

239binding or persist the default with `tui.raw_output_mode = true`.

94 240

95### Grant sandbox read access with `/sandbox-add-read-dir`241### Grant sandbox read access with `/sandbox-add-read-dir`

96 242

991. Type `/sandbox-add-read-dir C:\absolute\directory\path` and press Enter.2451. Type `/sandbox-add-read-dir C:\absolute\directory\path` and press Enter.

1002. Confirm the path is an existing absolute directory.2462. Confirm the path is an existing absolute directory.

101 247

102Expected: Codex refreshes the Windows sandbox policy and grants read access to that directory for later commands that run in the sandbox.248Expected: Codex refreshes the Windows sandbox policy and grants read access to

249that directory for later commands that run in the sandbox.

103 250

104### Inspect the session with `/status`251### Inspect the session with `/status`

105 252

1061. In any conversation, type `/status`.2531. In any conversation, type `/status`.

1072. Review the output for the active model, approval policy, writable roots, and current token usage.2542. Review the output for the active model, approval policy, writable roots, and current token usage.

108 255

109Expected: You see a summary like what `codex status` prints in the shell, confirming Codex is operating where you expect.256Expected: You see a summary like what `codex status` prints in the shell,

257confirming Codex is operating where you expect.

110 258

111### Inspect config layers with `/debug-config`259### Inspect config layers with `/debug-config`

112 260

1131. Type `/debug-config`.2611. Type `/debug-config`.

1142. Review the output for config layer order (lowest precedence first), on/off state, and policy sources.2622. Review the output for config layer order (lowest precedence first), on/off

263 state, and policy sources.

115 264

116Expected: Codex prints layer diagnostics plus policy details such as `allowed_approval_policies`, `allowed_sandbox_modes`, `mcp_servers`, `rules`, `enforce_residency`, and `experimental_network` when configured.265Expected: Codex prints layer diagnostics plus policy details such as

266`allowed_approval_policies`, `allowed_sandbox_modes`, `mcp_servers`, `rules`,

267`enforce_residency`, and `experimental_network` when configured.

117 268

118Use this output to debug why an effective setting differs from `config.toml`.269Use this output to debug why an effective setting differs from `config.toml`.

119 270

1221. Type `/statusline`.2731. Type `/statusline`.

1232. Use the picker to toggle and reorder items, then confirm.2742. Use the picker to toggle and reorder items, then confirm.

124 275

125Expected: The footer status line updates immediately and persists to `tui.status_line` in `config.toml`.276Expected: The footer status line updates immediately and persists to

277`tui.status_line` in `config.toml`.

278

279Available status-line items include model, model+reasoning, context stats, rate

280limits, git branch, token counters, session id, current directory/project root,

281and Codex version.

282

283### Configure terminal title items with `/title`

284

2851. Type `/title`.

2862. Use the picker to toggle and reorder items, then confirm.

287

288Expected: The terminal window or tab title updates immediately and persists to

289`tui.terminal_title` in `config.toml`.

290

291Available title items include app name, project, spinner, status, thread, git

292branch, model, and task progress.

293

294### Choose a syntax theme with `/theme`

295

2961. Type `/theme`.

2972. Preview a theme from the picker, then confirm.

298

299Expected: Codex updates syntax highlighting and persists the choice to

300`tui.theme` in `config.toml`.

301

302### Remap TUI shortcuts with `/keymap`

303

304Use `/keymap` to inspect, update, and persist keyboard shortcut bindings for the TUI.

305

3061. Type `/keymap`.

3072. Pick the shortcut context and action you want to change.

3083. Enter the new binding or remove the existing one.

126 309

127Available status-line items include model, model+reasoning, context stats, rate limits, git branch, token counters, session id, current directory/project root, and Codex version.310Expected: Codex updates the active keymap and writes the custom binding to `tui.keymap` in `config.toml`.

311

312Key bindings use names such as `ctrl-a`, `shift-enter`, and `page-down`. Context-specific bindings override `tui.keymap.global`; an empty binding list unbinds the action.

128 313

129### Check background terminals with `/ps`314### Check background terminals with `/ps`

130 315

1311. Type `/ps`.3161. Type `/ps`.

1322. Review the list of background terminals and their status.3172. Review the list of background terminals and their status.

133 318

134Expected: Codex shows each background terminal’s command plus up to three recent, non-empty output lines so you can gauge progress at a glance.319Expected: Codex shows each background terminal's command plus up to three

320recent, non-empty output lines so you can gauge progress at a glance.

135 321

136Background terminals appear when `unified_exec` is in use; otherwise, the list may be empty.322Background terminals appear when `unified_exec` is in use; otherwise, the list may be empty.

137 323

324### Stop background terminals with `/stop`

325

3261. Type `/stop`.

3272. Confirm if Codex asks before stopping the listed terminals.

328

329Expected: Codex stops all background terminals for the current session. `/clean`

330is still available as an alias for `/stop`.

331

138### Keep transcripts lean with `/compact`332### Keep transcripts lean with `/compact`

139 333

1401. After a long exchange, type `/compact`.3341. After a long exchange, type `/compact`.

1412. Confirm when Codex offers to summarize the conversation so far.3352. Confirm when Codex offers to summarize the conversation so far.

142 336

143Expected: Codex replaces earlier turns with a concise summary, freeing context while keeping critical details.337Expected: Codex replaces earlier turns with a concise summary, freeing context

338while keeping critical details.

144 339

145### Review changes with `/diff`340### Review changes with `/diff`

146 341

1471. Type `/diff` to inspect the Git diff.3421. Type `/diff` to inspect the Git diff.

1482. Scroll through the output inside the CLI to review edits and added files.3432. Scroll through the output inside the CLI to review edits and added files.

149 344

150Expected: Codex shows changes you’ve staged, changes you haven’t staged yet, and files Git hasn’t started tracking, so you can decide what to keep.345Expected: Codex shows changes you've staged, changes you haven't staged yet,

346and files Git hasn't started tracking, so you can decide what to keep.

151 347

152### Highlight files with `/mention`348### Highlight files with `/mention`

153 349

160 356

1611. Type `/new` and press Enter.3571. Type `/new` and press Enter.

162 358

163Expected: Codex starts a fresh conversation in the same CLI session, so you can switch tasks without leaving your terminal.359Expected: Codex starts a fresh conversation in the same CLI session, so you

360can switch tasks without leaving your terminal.

361

362Unlike `/clear`, `/new` doesn't clear the current terminal view first.

164 363

165### Resume a saved conversation with `/resume`364### Resume a saved conversation with `/resume`

166 365

1671. Type `/resume` and press Enter.3661. Type `/resume` and press Enter.

1682. Choose the session you want from the saved-session picker.3672. Choose the session you want from the saved-session picker.

169 368

170Expected: Codex reloads the selected conversation’s transcript so you can pick up where you left off, keeping the original history intact.369Expected: Codex reloads the selected conversation's transcript so you can pick

370up where you left off, keeping the original history intact.

171 371

172### Fork the current conversation with `/fork`372### Fork the current conversation with `/fork`

173 373

1741. Type `/fork` and press Enter.3741. Type `/fork` and press Enter.

175 375

176Expected: Codex clones the current conversation into a new thread with a fresh ID, leaving the original transcript untouched so you can explore an alternative approach in parallel.376Expected: Codex clones the current conversation into a new thread with a fresh

377ID, leaving the original transcript untouched so you can explore an alternative

378approach in parallel.

379

380If you need to fork a saved session instead of the current one, run

381`codex fork` in your terminal to open the session picker.

382

383### Start a side conversation with `/side`

384

385Use `/side` to start an ephemeral fork from the current conversation without switching away from the main task.

386

3871. Type `/side` to open a side conversation.

3882. Optionally add inline text, for example `/side Check whether this plan has an obvious risk`.

3893. Return to the parent thread after the focused detour finishes.

177 390

178If you need to fork a saved session instead of the current one, run `codex fork` in your terminal to open the session picker.391Expected: Codex opens a side conversation whose transcript is separate from the parent thread. While you are in side mode, the TUI continues to show parent-thread status so you can see whether the main task is still running.

392

393`/side` is unavailable inside another side conversation and during review mode.

179 394

180### Generate `AGENTS.md` with `/init`395### Generate `AGENTS.md` with `/init`

181 396

1821. Run `/init` in the directory where you want Codex to look for persistent instructions.3971. Run `/init` in the directory where you want Codex to look for persistent instructions.

1832. Review the generated `AGENTS.md`, then edit it to match your repository conventions.3982. Review the generated `AGENTS.md`, then edit it to match your repository conventions.

184 399

185Expected: Codex creates an `AGENTS.md` scaffold you can refine and commit for future sessions.400Expected: Codex creates an `AGENTS.md` scaffold you can refine and commit for

401future sessions.

186 402

187### Ask for a working tree review with `/review`403### Ask for a working tree review with `/review`

188 404

1891. Type `/review`.4051. Type `/review`.

1902. Follow up with `/diff` if you want to inspect the exact file changes.4062. Follow up with `/diff` if you want to inspect the exact file changes.

191 407

192Expected: Codex summarizes issues it finds in your working tree, focusing on behavior changes and missing tests. It uses the current session model unless you set `review_model` in `config.toml`.408Expected: Codex summarizes issues it finds in your working tree, focusing on

409behavior changes and missing tests. It uses the current session model unless

410you set `review_model` in `config.toml`.

193 411

194### List MCP tools with `/mcp`412### List MCP tools with `/mcp`

195 413

198 416

199Expected: You see the configured Model Context Protocol (MCP) tools Codex can call in this session.417Expected: You see the configured Model Context Protocol (MCP) tools Codex can call in this session.

200 418

419Use `/mcp verbose` to include detailed server diagnostics. If you pass anything other than `verbose`, Codex shows the command usage.

420

201### Browse apps with `/apps`421### Browse apps with `/apps`

202 422

2031. Type `/apps`.4231. Type `/apps`.

2042. Pick an app from the list.4242. Pick an app from the list.

205 425

206Expected: Codex inserts the app mention into the composer as `$app-slug`, so you can immediately ask Codex to use it.426Expected: Codex inserts the app mention into the composer as `$app-slug`, so

427you can immediately ask Codex to use it.

428

429### Browse plugins with `/plugins`

430

4311. Type `/plugins`.

4322. Choose a marketplace tab, then pick a plugin to inspect its capabilities or available actions.

433

434Expected: Codex opens the plugin browser so you can review installed plugins,

435discoverable plugins that your configuration allows, and installed plugin state.

436Press <kbd>Space</kbd> on an installed plugin to toggle its enabled state.

437

438### Review hooks with `/hooks`

439

4401. Type `/hooks`.

4412. Choose a hook event to inspect the matching handlers.

4423. Trust, disable, or re-enable non-managed hooks as needed.

443

444Expected: Codex opens the hook browser so you can review configured lifecycle

445hooks. Managed hooks appear as managed and can't be disabled from the user hook

446browser.

207 447

208### Switch agent threads with `/agent`448### Switch agent threads with `/agent`

209 449

2101. Type `/agent` and press Enter.4501. Type `/agent` and press Enter.

2112. Select the thread you want from the picker.4512. Select the thread you want from the picker.

212 452

213Expected: Codex switches the active thread so you can inspect or continue that agent’s work.453Expected: Codex switches the active thread so you can inspect or continue that

454agent's work.

214 455

215### Send feedback with `/feedback`456### Send feedback with `/feedback`

216 457

2171. Type `/feedback` and press Enter.4581. Type `/feedback` and press Enter.

2182. Follow the prompts to include logs or diagnostics.4592. Follow the prompts to include logs or diagnostics.

219 460

220Expected: Codex collects the requested diagnostics and submits them to the maintainers.461Expected: Codex collects the requested diagnostics and submits them to the

462maintainers.

221 463

222### Sign out with `/logout`464### Sign out with `/logout`

223 465

cli/slash-commands.md Codex Docs, 2026-03-03 00:35 UTC → 2026-05-18 22:01 UTC