Documentation 2026-07-24 23:01 UTC to 2026-07-25 21:59 UTC

28| `Ctrl+X Ctrl+K` | Stop all running [background subagents](/docs/en/sub-agents#run-subagents-in-foreground-or-background) in this session. Press twice within 3 seconds to confirm | Subagent control |28| `Ctrl+X Ctrl+K` | Stop all running [background subagents](/docs/en/sub-agents#run-subagents-in-foreground-or-background) in this session. Press twice within 3 seconds to confirm | Subagent control |

29| `Ctrl+D` | Exit Claude Code session | The first press shows a confirmation hint and a second press within 800ms exits. When the prompt has text, `Ctrl+D` deletes the character after the cursor instead |29| `Ctrl+D` | Exit Claude Code session | The first press shows a confirmation hint and a second press within 800ms exits. When the prompt has text, `Ctrl+D` deletes the character after the cursor instead |

30| `Ctrl+G` or `Ctrl+X Ctrl+E` | Open in default text editor | Edit your prompt or custom response in your default text editor. `Ctrl+X Ctrl+E` is the readline-native binding. Turn on **Show last response in external editor** in `/config` to prepend Claude's previous reply as `#`-commented context above your prompt; Claude Code strips the comment block when you save |30| `Ctrl+G` or `Ctrl+X Ctrl+E` | Open in default text editor | Edit your prompt or custom response in your default text editor. `Ctrl+X Ctrl+E` is the readline-native binding. Turn on **Show last response in external editor** in `/config` to prepend Claude's previous reply as `#`-commented context above your prompt; Claude Code strips the comment block when you save |

31| `Ctrl+L` | Redraw screen | Forces a full terminal redraw. Input and conversation history are kept. Use this to recover if the display becomes garbled or partially blank |31| `Ctrl+L` | Redraw screen | Forces a full terminal redraw, keeping input and conversation history. Use this to recover if the display becomes garbled or partially blank. In [fullscreen rendering](/docs/en/fullscreen#clear-the-conversation), if you press `Ctrl+L` once, Claude Code redraws the screen and also shows a hint that pressing it again runs `/clear`. If you press it twice within two seconds, Claude Code runs `/clear` and starts a new conversation |

32| `Ctrl+O` | Toggle transcript viewer | Shows detailed tool usage and execution, with a timestamp and the model used on each assistant message. Also expands MCP calls, which collapse to a single line like "Called slack 3 times" by default |32| `Ctrl+O` | Toggle transcript viewer | Shows detailed tool usage and execution, with a timestamp and the model used on each assistant message. Also expands MCP calls, which collapse to a single line like "Called slack 3 times" by default |

33| `Ctrl+R` | Reverse search command history | Search through previous commands interactively |33| `Ctrl+R` | Reverse search command history | Search through previous commands interactively |

34| `Ctrl+V` or `Cmd+V` (iTerm2) or `Alt+V` (Windows and WSL) | Paste image from clipboard | Inserts an `[Image #N]` chip at the cursor so you can reference it positionally in your prompt. On WSL, both `Ctrl+V` and `Alt+V` are bound; use `Alt+V` if your terminal intercepts `Ctrl+V` |34| `Ctrl+V` or `Cmd+V` (iTerm2) or `Alt+V` (Windows and WSL) | Paste image from clipboard | Inserts an `[Image #N]` chip at the cursor so you can reference it positionally in your prompt. On WSL, both `Ctrl+V` and `Alt+V` are bound; use `Alt+V` if your terminal intercepts `Ctrl+V` |

13Each mode makes a different tradeoff between convenience and oversight. The table below shows what Claude can do without a permission prompt in each mode.13Each mode makes a different tradeoff between convenience and oversight. The table below shows what Claude can do without a permission prompt in each mode.

14 14 

15| Mode | What runs without asking | Best for |15| Mode | What runs without asking | Best for |

16| :------------------------------------------------------------------ | :------------------------------------------------------------------------------------- | :-------------------------------------- |16| :------------------------------------------------------------------ | :-------------------------------------------------------------------------------------------------------- | :-------------------------------------- |

17| `default` | Reads only | Getting started, sensitive work |17| `default` | Reads only | Getting started, sensitive work |

18| [`acceptEdits`](#auto-approve-file-edits-with-acceptedits-mode) | Reads, file edits, and common filesystem commands (`mkdir`, `touch`, `mv`, `cp`, etc.) | Iterating on code you're reviewing |18| [`acceptEdits`](#auto-approve-file-edits-with-acceptedits-mode) | Reads, file edits, and common filesystem commands (`mkdir`, `touch`, `mv`, `cp`, etc.) | Iterating on code you're reviewing |

19| [`plan`](#analyze-before-you-edit-with-plan-mode) | Reads only | Exploring a codebase before changing it |19| [`plan`](#analyze-before-you-edit-with-plan-mode) | Reads, plus classifier-approved commands when [auto mode](#eliminate-prompts-with-auto-mode) is available | Exploring a codebase before changing it |

20| [`auto`](#eliminate-prompts-with-auto-mode) | Everything, with background safety checks | Long tasks, reducing prompt fatigue |20| [`auto`](#eliminate-prompts-with-auto-mode) | Everything, with background safety checks | Long tasks, reducing prompt fatigue |

21| [`dontAsk`](#allow-only-pre-approved-tools-with-dontask-mode) | Only pre-approved tools | Locked-down CI and scripts |21| [`dontAsk`](#allow-only-pre-approved-tools-with-dontask-mode) | Only pre-approved tools | Locked-down CI and scripts |

22| [`bypassPermissions`](#skip-all-checks-with-bypasspermissions-mode) | Everything | Isolated containers and VMs only |22| [`bypassPermissions`](#skip-all-checks-with-bypasspermissions-mode) | Everything | Isolated containers and VMs only |

23 23 

24The mode that reviews every action is named **Manual** in the CLI, in `claude --help`, in the VS Code and JetBrains extensions, and in the desktop app. Its config value is `default`, which is what hooks and SDK integrations use. The CLI accepts `manual` as an alias wherever you type the value, for example `claude --permission-mode manual` or `"defaultMode": "manual"`. The Manual label and the `manual` alias require Claude Code v2.1.200 or later. The desktop app's label doesn't depend on your CLI version.24The mode that reviews every action is named **Manual** in the CLI, in `claude --help`, in the VS Code and JetBrains extensions, and in the desktop app. Its config value is `default`, which is what hooks and SDK integrations use. The CLI accepts `manual` as an alias wherever you type the value, for example `claude --permission-mode manual` or `"defaultMode": "manual"`. The Manual label and the `manual` alias require Claude Code v2.1.200 or later. The desktop app's label doesn't depend on your CLI version.

25 25 

26In every mode except `bypassPermissions`, writes to [protected paths](#protected-paths) are never auto-approved, guarding repository state and Claude's own configuration against accidental corruption.26Writes to [protected paths](#protected-paths) are never auto-approved except in `bypassPermissions` mode and in planning sessions with bypass permissions available, guarding repository state and Claude's own configuration against accidental corruption.

27 27 

28Modes set the baseline. Layer [permission rules](/docs/en/permissions#manage-permissions) on top to pre-approve or block specific tools. These controls apply in every mode, including `bypassPermissions`:28Modes set the baseline. Layer [permission rules](/docs/en/permissions#manage-permissions) on top to pre-approve or block specific tools. These controls apply in every mode, including `bypassPermissions`:

29 29 

151 151 

152## Analyze before you edit with plan mode152## Analyze before you edit with plan mode

153 153 

154Plan mode tells Claude to research and propose changes without making them. Claude reads files, runs shell commands to explore, and writes a plan, but does not edit your source. Permission prompts apply as they do in Manual mode unless [auto mode](/docs/en/auto-mode-config) is available and `useAutoModeDuringPlan` is on, which is the default. With auto mode active, the classifier approves read-only commands such as searches and file reads without prompting. Edits stay blocked either way until you approve the plan.154Plan mode tells Claude to research and propose changes without making them. Claude reads files, runs shell commands to explore, and writes a plan, but does not edit your source. Except in sessions with [bypass permissions available](#skip-all-checks-with-bypasspermissions-mode), edits stay blocked until you approve the plan.

155 155 

156Shell commands outside the [built-in read-only set](/docs/en/permissions#read-only-commands), including file-modifying ones such as `touch` and `rm`, prompt for approval in plan mode, including when auto mode is active during planning and when the sandbox's [auto-allow mode](/docs/en/sandboxing#sandbox-modes) is enabled.156{/* min-version: 2.1.218 */}When [auto mode](/docs/en/auto-mode-config) is available and the `useAutoModeDuringPlan` setting is on, which it is by default, the classifier reviews shell commands during planning instead of prompting you. Approved commands run, and rejected ones are blocked. Otherwise, commands outside the [built-in read-only set](/docs/en/permissions#read-only-commands) prompt for approval, including when the sandbox's [auto-allow mode](/docs/en/sandboxing#sandbox-modes) is enabled. Sessions with [bypass permissions available](#skip-all-checks-with-bypasspermissions-mode) skip both paths; that section covers what still prompts there. In sessions without them, commands outside the read-only set prompted either way in v2.1.212 through v2.1.217.

157 157 

158Enter plan mode by pressing `Shift+Tab` or prefixing a single prompt with `/plan`. You can also start in plan mode from the CLI:158Enter plan mode by pressing `Shift+Tab` or prefixing a single prompt with `/plan`. You can also start in plan mode from the CLI:

159 159 

196 196 

197Auto mode lets Claude execute without routine permission prompts. A separate classifier model reviews actions before they run, blocking anything that escalates beyond your request, targets unrecognized infrastructure, or appears driven by hostile content Claude read. Explicit [ask rules](/docs/en/permissions#manage-permissions) still force a prompt.197Auto mode lets Claude execute without routine permission prompts. A separate classifier model reviews actions before they run, blocking anything that escalates beyond your request, targets unrecognized infrastructure, or appears driven by hostile content Claude read. Explicit [ask rules](/docs/en/permissions#manage-permissions) still force a prompt.

198 198 

199Removals targeting the filesystem root or home directory, such as `rm -rf /` and `rm -rf ~`, prompt for approval instead of going to the classifier. {/* min-version: 2.1.208 */}This prompt also fires when the command contains command substitution with `$(...)` or backticks, or process substitution with `<(...)`, whether the removal sits inside the substitution, as in `echo "$(rm -rf ~)"`, or elsewhere in the same command. Before v2.1.208, commands containing those forms went to the classifier instead of prompting.199{/* min-version: 2.1.218 */}The classifier also decides removals targeting the filesystem root or home directory, such as `rm -rf /` and `rm -rf ~`, including when the removal sits inside command or process substitution. Before v2.1.218, the plain forms prompted for approval instead, and the substitution forms prompted in v2.1.208 through v2.1.217.

200 200 

201Auto mode also nudges Claude to keep working without stopping for clarifying questions, though Claude still asks when your prompt or a skill explicitly relies on it. For stronger autonomous behavior while keeping permission prompts, set the [Proactive output style](/docs/en/output-styles) instead.201Auto mode also nudges Claude to keep working without stopping for clarifying questions, though Claude still asks when your prompt or a skill explicitly relies on it. For stronger autonomous behavior while keeping permission prompts, set the [Proactive output style](/docs/en/output-styles) instead.

202 202 

398 398 

399Removals targeting the filesystem root or home directory, such as `rm -rf /` and `rm -rf ~`, still prompt as a circuit breaker against model error. {/* min-version: 2.1.208 */}The circuit breaker also fires when the command contains command substitution with `$(...)` or backticks, or process substitution with `<(...)`, whether the removal sits inside the substitution, as in `echo "$(rm -rf ~)"`, or elsewhere in the same command. The plain form, typed as its own command, has prompted in this mode since the circuit breaker was introduced; before v2.1.208, commands containing those forms didn't prompt.399Removals targeting the filesystem root or home directory, such as `rm -rf /` and `rm -rf ~`, still prompt as a circuit breaker against model error. {/* min-version: 2.1.208 */}The circuit breaker also fires when the command contains command substitution with `$(...)` or backticks, or process substitution with `<(...)`, whether the removal sits inside the substitution, as in `echo "$(rm -rf ~)"`, or elsewhere in the same command. The plain form, typed as its own command, has prompted in this mode since the circuit breaker was introduced; before v2.1.208, commands containing those forms didn't prompt.

400 400 

401In sessions with bypass permissions available, Claude Code also doesn't enforce [plan mode's](#analyze-before-you-edit-with-plan-mode) blocks. Claude is still instructed to plan without editing, but a file edit or shell command it attempts during planning runs without prompting. Explicit [ask rules](/docs/en/permissions#manage-permissions) and the removal circuit breaker above still prompt.

402 

401<Warning>403<Warning>

402 Only use this mode in isolated environments like containers, VMs, or dev containers without internet access, where Claude Code cannot damage your host system.404 Only use this mode in isolated environments like containers, VMs, or dev containers without internet access, where Claude Code cannot damage your host system.

403</Warning>405</Warning>

428 430 

429## Protected paths431## Protected paths

430 432 

431Writes to a small set of paths are never auto-approved, in every mode except `bypassPermissions`. This prevents accidental corruption of repository state and Claude's own configuration.433Writes to a small set of paths are never auto-approved, except in `bypassPermissions` mode and in planning sessions with [bypass permissions](#skip-all-checks-with-bypasspermissions-mode) available. This prevents accidental corruption of repository state and Claude's own configuration.

432 434 

433| Mode | Protected-path writes |435| Mode | Protected-path writes |

434| :------------------------------- | :----------------------- |436| :----------------------- | :------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |

435| `default`, `acceptEdits`, `plan` | Prompted |437| `default`, `acceptEdits` | Prompted |

438| `plan` | Prompted. {/* min-version: 2.1.217 */}In sessions with [bypass permissions](#skip-all-checks-with-bypasspermissions-mode) available, allowed. {/* min-version: 2.1.218 */}Otherwise, with [auto mode](#eliminate-prompts-with-auto-mode) available during planning, routed to the classifier |

436| `auto` | Routed to the classifier |439| `auto` | Routed to the classifier |

437| `dontAsk` | Denied |440| `dontAsk` | Denied |

438| `bypassPermissions` | Allowed |441| `bypassPermissions` | Allowed |

52| :------------------ | :-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |52| :------------------ | :-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |

53| `default` | Standard behavior: prompts for permission on first use of each tool. {/* min-version: 2.1.200 */}Labeled Manual in the CLI, the VS Code and JetBrains extensions, and the desktop app, and Claude Code accepts `manual` as an alias. The label and alias require Claude Code v2.1.200 or later. The desktop app's label doesn't depend on your CLI version |53| `default` | Standard behavior: prompts for permission on first use of each tool. {/* min-version: 2.1.200 */}Labeled Manual in the CLI, the VS Code and JetBrains extensions, and the desktop app, and Claude Code accepts `manual` as an alias. The label and alias require Claude Code v2.1.200 or later. The desktop app's label doesn't depend on your CLI version |

54| `acceptEdits` | Automatically accepts file edits and common filesystem commands such as `mkdir`, `touch`, `mv`, and `cp` for paths in the working directory or `additionalDirectories` |54| `acceptEdits` | Automatically accepts file edits and common filesystem commands such as `mkdir`, `touch`, `mv`, and `cp` for paths in the working directory or `additionalDirectories` |

55| `plan` | Claude reads files and runs read-only shell commands to explore but doesn't edit your source files. Labeled Plan in the CLI and the VS Code extension |55| `plan` | Claude reads files and runs read-only shell commands to explore but doesn't edit your source files; with [auto mode](/docs/en/permission-modes#eliminate-prompts-with-auto-mode) available, classifier-approved commands also run. Labeled Plan in the CLI and the VS Code extension |

56| `auto` | Auto-approves tool calls with background safety checks that verify actions align with your request |56| `auto` | Auto-approves tool calls with background safety checks that verify actions align with your request |

57| `dontAsk` | Auto-denies tools unless pre-approved via `/permissions` or `permissions.allow` rules. `AskUserQuestion`, connector tools [your organization set to `ask`](/docs/en/mcp#organization-controls-on-connector-tools), and MCP tools marked [`requiresUserInteraction`](/docs/en/mcp#require-approval-for-a-specific-tool) are denied even if you've allowed them |57| `dontAsk` | Auto-denies tools unless pre-approved via `/permissions` or `permissions.allow` rules. `AskUserQuestion`, connector tools [your organization set to `ask`](/docs/en/mcp#organization-controls-on-connector-tools), and MCP tools marked [`requiresUserInteraction`](/docs/en/mcp#require-approval-for-a-specific-tool) are denied even if you've allowed them |

58| `bypassPermissions` | Skips permission prompts, except those forced by explicit `ask` rules, connector tools [your organization set to `ask`](/docs/en/mcp#organization-controls-on-connector-tools), and MCP tools marked [`requiresUserInteraction`](/docs/en/mcp#require-approval-for-a-specific-tool). Root and home directory removals such as `rm -rf /` also still prompt as a circuit breaker |58| `bypassPermissions` | Skips permission prompts, except those forced by explicit `ask` rules, connector tools [your organization set to `ask`](/docs/en/mcp#organization-controls-on-connector-tools), and MCP tools marked [`requiresUserInteraction`](/docs/en/mcp#require-approval-for-a-specific-tool). Root and home directory removals such as `rm -rf /` also still prompt as a circuit breaker |

471 471 

472When you enable sandboxing and leave `autoAllowBashIfSandboxed` at its default of `true`, sandboxed Bash commands run without prompting even if your permissions include a bare `Bash` ask rule, or the [equivalent `Bash(*)` form](#match-all-uses-of-a-tool): the sandbox boundary substitutes for that whole-tool prompt.472When you enable sandboxing and leave `autoAllowBashIfSandboxed` at its default of `true`, sandboxed Bash commands run without prompting even if your permissions include a bare `Bash` ask rule, or the [equivalent `Bash(*)` form](#match-all-uses-of-a-tool): the sandbox boundary substitutes for that whole-tool prompt.

473 473 

474In [plan mode](/docs/en/permission-modes#analyze-before-you-edit-with-plan-mode), Claude Code skips this substitution. Without an ask rule, the built-in read-only commands still run without prompting, and any other shell command prompts for approval while you are still planning. With a bare `Bash` ask rule, every Bash command prompts, including sandboxed read-only commands, the same as outside sandboxing. Before v2.1.212, the substitution applied in plan mode as well.474In [plan mode](/docs/en/permission-modes#analyze-before-you-edit-with-plan-mode), Claude Code skips this substitution. Without an ask rule, the built-in read-only commands still run without prompting, and any other shell command prompts for approval while you are still planning{/* min-version: 2.1.218 */}, or goes to the classifier when [auto mode](/docs/en/permission-modes#eliminate-prompts-with-auto-mode) is available and `useAutoModeDuringPlan` is on. With a bare `Bash` ask rule, every Bash command prompts, including sandboxed read-only commands, the same as outside sandboxing. Before v2.1.212, the substitution applied in plan mode as well. In v2.1.212 through v2.1.217, those commands prompted even when auto mode was available.

475 475 

476These checks still apply:476These checks still apply:

477 477 

478* Content-scoped ask rules like `Bash(git push *)` still force a prompt478* Content-scoped ask rules like `Bash(git push *)` still force a prompt

479* Explicit deny rules still apply479* Explicit deny rules still apply

480* `rm` or `rmdir` commands that target `/`, your home directory, or other critical system paths still trigger a prompt480* `rm` or `rmdir` commands that target `/`, your home directory, or other critical system paths still trigger a prompt{/* min-version: 2.1.218 */}, or a classifier check in [auto mode](/docs/en/permission-modes#eliminate-prompts-with-auto-mode); the classifier routing requires Claude Code v2.1.218 or later

481 481 

482Commands that won't run sandboxed, such as excluded commands, respect the bare `Bash` ask rule as usual. See [sandbox modes](/docs/en/sandboxing#sandbox-modes) to change this behavior.482Commands that won't run sandboxed, such as excluded commands, respect the bare `Bash` ask rule as usual. See [sandbox modes](/docs/en/sandboxing#sandbox-modes) to change this behavior.

483 483 

172### Owner fields172### Owner fields

173 173 

174| Field | Type | Required | Description |174| Field | Type | Required | Description |

175| :------ | :----- | :------- | :------------------------------- |175| :------ | :----- | :------- | :------------------------------------------- |

176| `name` | string | Yes | Name of the maintainer or team |176| `name` | string | Yes | Name of the maintainer or team |

177| `email` | string | No | Contact email for the maintainer |177| `email` | string | No | Contact email for the maintainer |

178| `url` | string | No | Website, GitHub profile, or organization URL |

178 179 

179### Optional fields180### Optional fields

180 181 

209| `displayName` | string | {/* min-version: 2.1.143 */}Human-readable name shown in UI surfaces. Falls back to `name` when omitted. May contain spaces and any casing. Not used for namespacing or lookup. Requires Claude Code v2.1.143 or later. |210| `displayName` | string | {/* min-version: 2.1.143 */}Human-readable name shown in UI surfaces. Falls back to `name` when omitted. May contain spaces and any casing. Not used for namespacing or lookup. Requires Claude Code v2.1.143 or later. |

210| `description` | string | Brief plugin description |211| `description` | string | Brief plugin description |

211| `version` | string | Plugin version. If set (here or in `plugin.json`), the plugin is pinned to this string and users only receive updates when it changes. Omit to fall back to the git commit SHA. See [Version resolution](#version-resolution-and-release-channels). |212| `version` | string | Plugin version. If set (here or in `plugin.json`), the plugin is pinned to this string and users only receive updates when it changes. Omit to fall back to the git commit SHA. See [Version resolution](#version-resolution-and-release-channels). |

212| `author` | object | Plugin author information (`name` required, `email` optional) |213| `author` | object | Plugin author information (`name` required; `email` and `url` optional) |

213| `homepage` | string | Plugin homepage or documentation URL |214| `homepage` | string | Plugin homepage or documentation URL |

214| `repository` | string | Source code repository URL |215| `repository` | string | Source code repository URL |

215| `license` | string | SPDX license identifier (for example, MIT, Apache-2.0) |216| `license` | string | SPDX license identifier (for example, MIT, Apache-2.0) |

122Even in auto-allow mode, the following still apply:122Even in auto-allow mode, the following still apply:

123 123 

124* Explicit [deny rules](/docs/en/permissions) are always respected124* Explicit [deny rules](/docs/en/permissions) are always respected

125* `rm` or `rmdir` commands that target `/`, your home directory, or other critical system paths still trigger a permission prompt125* `rm` or `rmdir` commands that target `/`, your home directory, or other critical system paths still trigger a permission prompt{/* min-version: 2.1.218 */}, or a classifier check in [auto mode](/docs/en/permission-modes#eliminate-prompts-with-auto-mode); the classifier routing requires Claude Code v2.1.218 or later

126* Content-scoped [ask rules](/docs/en/permissions) like `Bash(git push *)` still force a prompt even for sandboxed commands126* Content-scoped [ask rules](/docs/en/permissions) like `Bash(git push *)` still force a prompt even for sandboxed commands

127* A bare `Bash` ask rule, or the equivalent `Bash(*)` form, is skipped for commands that run sandboxed; it still applies to commands that fall back to the regular permission flow. {/* min-version: 2.1.212 */}In [plan mode](/docs/en/permission-modes#analyze-before-you-edit-with-plan-mode), the rule isn't skipped: it prompts for sandboxed commands too, including read-only ones. Before v2.1.212, the skip applied in plan mode as well127* A bare `Bash` ask rule, or the equivalent `Bash(*)` form, is skipped for commands that run sandboxed; it still applies to commands that fall back to the regular permission flow. {/* min-version: 2.1.212 */}In [plan mode](/docs/en/permission-modes#analyze-before-you-edit-with-plan-mode), the rule isn't skipped: it prompts for sandboxed commands too, including read-only ones. Before v2.1.212, the skip applied in plan mode as well

128 128 

139<Info>139<Info>

140 Auto-allow mode works independently of your permission mode setting, with one exception: [plan mode](/docs/en/permission-modes#analyze-before-you-edit-with-plan-mode). Even if you're not in "accept edits" mode, sandboxed Bash commands run automatically when auto-allow is enabled. This means Bash commands that modify files within the sandbox boundaries execute without prompting, even when file edit tools would normally require approval.140 Auto-allow mode works independently of your permission mode setting, with one exception: [plan mode](/docs/en/permission-modes#analyze-before-you-edit-with-plan-mode). Even if you're not in "accept edits" mode, sandboxed Bash commands run automatically when auto-allow is enabled. This means Bash commands that modify files within the sandbox boundaries execute without prompting, even when file edit tools would normally require approval.

141 141 

142 {/* min-version: 2.1.212 */}In plan mode, only [read-only commands](/docs/en/permissions#read-only-commands) run without prompting; any other Bash command prompts for approval even with auto-allow enabled. Before v2.1.212, auto-allow ran sandboxed commands without a prompt in plan mode too.142 {/* min-version: 2.1.212 */}In plan mode, auto-allow doesn't widen approvals. Bash commands outside the [built-in read-only set](/docs/en/permissions#read-only-commands) prompt for approval even with auto-allow enabled{/* min-version: 2.1.218 */}, or go to the classifier when [auto mode](/docs/en/permission-modes#eliminate-prompts-with-auto-mode) is available and `useAutoModeDuringPlan` is on; in v2.1.212 through v2.1.217 they always prompted. Before v2.1.212, auto-allow ran sandboxed commands without a prompt in plan mode too.

143</Info>143</Info>

144 144 

145## Configure sandboxing145## Configure sandboxing